F. Moussy and P. Franciosi, Physique et mécanique de la mise en forme des métaux, 1990.

F. Moussy, Interaction modèles-expériences dans l'industrie nécessités et limites, J. Phys. IV, 2002.

Y. Ledoux, Optimisation des procédés d'emboutissage par caractérisation géométrique et essais numériques, Thèse de Doctorat, 2005.

O. Incandela, Définition de protocoles rationnels d'identification de lois de comportement élastoplastiques : Application à la simulation éléments finis d'opération industrielle d'emboutissage, Thèse de Doctorat, 2006.

A. Molinari and L. S. Toth, Tuning a self consistent viscoplastic model by finite element results???I. Modeling, Acta Metallurgica et Materialia, vol.42, issue.7, pp.2453-2458, 1994.
DOI : 10.1016/0956-7151(94)90324-7

U. F. Kocks, C. N. Tomé, and H. Wenk, Texture and anisotropy, 1998.

S. Dumoulin, De l'utilisation d'une loi monocristalline en vue de la caractérisation du comportement plastique du multicristal d'aluminium, Thèse de Doctorat, 2001.

G. Cailletaud, S. Forest, D. Jeulin, F. Feyel, I. Galliet et al., Some elements of microstructural mechanics, Computational Materials Science, vol.27, issue.3, pp.351-374, 2003.
DOI : 10.1016/S0927-0256(03)00041-7

A. Musienko, K. Schmidegg, O. Kolednik, R. Pippan, and G. Cailletaud, FE simulation of multicrystals at large strains, Problems of Material Science, vol.33, issue.1, pp.357-364, 2003.

B. Devincre and M. Condat, Model validation of a 3D simulation of dislocation dynamics: Discretization and line tension effects, Acta Metallurgica et Materialia, vol.40, issue.10, pp.2629-2937, 1994.
DOI : 10.1016/0956-7151(92)90332-9

B. Devincre and &. L. Kubin, Mesoscopic simulations of dislocations and plasticity, Materials Science and Engineering: A, vol.234, issue.236, pp.234-236, 1997.
DOI : 10.1016/S0921-5093(97)00146-9

C. Déprés, Modélisation physique des stades précurseurs de l'endommagement en fatigue dans l'acier inoxydable austénitique 316L, Thèse de Doctorat, 2004.

B. Devincre, L. Kubin, and T. Hoc, Physical Analysis Plasticity by DD Simulations, Scripta Materialia, vol.54, 2006.

H. Mecking, Syntheses: Modeling of polycristal plasticity, Modelling Simul, Mater. Sci. Eng, vol.7, pp.669-673, 1999.

A. Molinari, G. R. Canova, and S. Ahzi, A self consistent approach of the large deformation polycristal viscoplasticity, Acta Mettall, pp.2983-2994, 1987.

C. Rey, simulation des champs mécaniques locaux pour différentes microstructures et agrégats, 2006.

E. Orowan, Zur Kristallplastizität II ? Die dynamische Auffassung der Kristallplastizität, Zeitschrift für Physik, pp.614-633, 1934.
DOI : 10.1007/bf01341480

E. Orowan, Zur Kristallplastizität iII ? Uber den Mechanismus des Gleitvorganges, pp.634-659, 1934.
DOI : 10.1007/bf01341480

C. Teodosiu, A physical theory of the finite elastic-viscoplastic behaviour of single crystal, Eng. Trans, vol.23, pp.157-183, 1975.

C. Teodosiu and F. Sidoroff, A theory of finite elastoviscoplasticity of single crystals, International Journal of Engineering Science, vol.14, issue.2, pp.165-176, 1976.
DOI : 10.1016/0020-7225(76)90085-9

L. Tabourot, Vers une vision unifiée de la plasticité cristalline, Habilitation à Diriger des Recherches, 2001.

Y. W. Chang and R. J. Asaro, An Experimental study of Shear localization in aluminium-copper single crystal, Acta Metall, vol.29, 1981.

G. J. Weng, Anisotropic Hardening in Single Crystals and the Plasticity of Polycristals, Int. J. Plast, vol.3, 1987.

U. F. Kocks, Laws for Work-Hardening and Low-Temperature Creep, Journal of Engineering Materials and Technology, vol.98, issue.1, pp.76-85, 1976.
DOI : 10.1115/1.3443340

D. Peirce, R. D. Asaro, and A. Needleman, Material rate dependence and localized deformation in crystalline solids, Acta Metallurgica, vol.31, issue.12, pp.1951-1976, 1983.
DOI : 10.1016/0001-6160(83)90014-7

L. Méric and G. Cailletaud, Single Crystal Modeling for Structural Calculations: Part 2???Finite Element Implementation, Journal of Engineering Materials and Technology, vol.113, issue.1, pp.171-182, 1991.
DOI : 10.1115/1.2903375

G. Cailletaud, A micromechanical approach to inelastic behaviour of metals, International Journal of Plasticity, vol.8, issue.1, pp.55-73, 1991.
DOI : 10.1016/0749-6419(92)90038-E

P. Franciosi, Etude Théorique et Expérimentale du comportement Elastoplastique des monocristaux se déformant par glissement : modélisation pour un chargement complexe quasi-statique, Thèse de Doctorat, 1984.

P. Franciosi, The concepts of latent hardening and strain hardening in metallic single crystals, Acta Metallurgica, vol.33, issue.9, 1985.
DOI : 10.1016/0001-6160(85)90154-3

H. Mecking and K. Lucke, A new aspect of the theory of flow stress of metals, Scripta Metallurgica, vol.4, issue.6, pp.427-432, 1970.
DOI : 10.1016/0036-9748(70)90078-5

H. Mecking and U. F. Kocks, Kinetics of flow and strain-hardening, Acta Metallurgica, vol.29, issue.11, pp.1865-1875, 1981.
DOI : 10.1016/0001-6160(81)90112-7

L. Tabourot, Loi de comportement elastoviscoplastique du monocristal en grande transformation, Thèse de Doctorat, 1992.

L. Tabourot, M. Fivel, and E. Rauch, Generalised constitutive laws for FCC single crystals, Mat. Sci. Engng, pp.234-236, 1997.
DOI : 10.1016/s0921-5093(97)00353-5

S. Frénois, Modélisation polycristalline du comportement mécanique du tantale. Application à la mise en forme par hydroformage, Thèse de Doctorat, 2001.

L. P. Evers, W. A. Brekelmans, and M. G. Geers, Scale dependent crystal plasticity framework with dislocation density and grain boundary effects, International Journal of Solids and Structures, vol.41, issue.18-19, pp.5209-5230, 2004.
DOI : 10.1016/j.ijsolstr.2004.04.021

B. Peeters, M. Seefeldt, C. Teodosiu, S. R. Kalidindi, P. Van-houtte et al., Work-hardening/softening behaviour of b.c.c. polycrystals during changing strain paths: I. An integrated model based on substructure and texture evolution, and its prediction of the stress???strain behaviour of an IF steel during two-stage strain paths, Acta Materialia, vol.49, issue.9, pp.1607-1619, 2001.
DOI : 10.1016/S1359-6454(01)00066-0

C. Gaudin, Etude des mécanismes associés au rochet cyclique d'un acier austenitique AISI 316 L, 2002.

Y. Estrin and H. Mecking, A unified phenomenological description of workhardening and creep based on one parameter models, Acta Metall, 1984.

G. Saada, Sur le durcissement d?? ?? la recombinaison des dislocations, Acta Metallurgica, vol.8, issue.12, p.841, 1960.
DOI : 10.1016/0001-6160(60)90150-4

U. Essmann and H. Mughrabi, Annihilation of dislocations during tensile and cyclic deformation and limits of dislocation densities, Philosophical Magazine A, vol.28, issue.6, pp.731-756, 1979.
DOI : 10.1080/01418617908234871

M. F. Ashby, The deformation of plastically non-homogeneous materials, Philosophical Magazine, vol.245, issue.170, pp.399-424, 1970.
DOI : 10.1016/0001-6160(64)90034-3

H. Mughrabi, On the role of strain gradients and long-range internal stresses in the composite model of crystal plasticity, Materials Science and Engineering: A, vol.317, issue.1-2, pp.171-180, 2001.
DOI : 10.1016/S0921-5093(01)01173-X

H. Mughrabi, Dislocation wall and cell structures and long-range internal stresses in deformed metal crystals, Acta Metall, p.1367, 1983.

X. Feaugas, On the origin of the tensile flow stress in the stainless steel AISI 316L at 300 K: back stress and effective stress, Acta Materialia, vol.47, issue.13, pp.3617-3632, 1999.
DOI : 10.1016/S1359-6454(99)00222-0

Y. Estrin, L. S. Toth, A. Molinari, and Y. Bréchet, A dislocation-based model for all hardening stages in large strain deformation, Acta Materialia, vol.46, issue.15, pp.5509-5522, 1998.
DOI : 10.1016/S1359-6454(98)00196-7

D. Kuhlmann-wilsdorf, The theory of dislocation-based crystal plasticity, Philosophical Magazine A, vol.11, issue.4, pp.955-1008, 1999.
DOI : 10.1007/BF02658671

J. Hirth and J. Lothe, Theory of dislocations, 1982.

C. Gaudin and X. Feaugas, Cyclic creep process in AISI 316L stainless steel in terms of dislocation patterns and internal stresses, Acta Materialia, vol.52, issue.10, pp.3097-3110, 2004.
DOI : 10.1016/j.actamat.2004.03.011

X. Feaugas and C. Gaudin, Ratchetting process in the stainless steel AISI 316L at 300 K: an experimental investigation, International Journal of Plasticity, vol.20, issue.4-5, pp.643-662, 2004.
DOI : 10.1016/S0749-6419(03)00076-7

E. A. Repetto and M. Ortiz, A micromechanical model of cyclic deformation and fatigue-crack nucleation in f.c.c. single crystals, Acta Materialia, vol.45, issue.6, pp.2577-2595, 1997.
DOI : 10.1016/S1359-6454(96)00368-0

Y. Estrin, H. Braasch, and &. Y. Brechet, A Dislocation Density Based Constitutive Model for Cyclic Deformation, Journal of Engineering Materials and Technology, vol.118, issue.4, pp.441-447, 1996.
DOI : 10.1115/1.2805940

R. Becker, J. F. Butler, H. Jr, L. A. Hu, and . Lalli, Analysis of an aluminum single crystal with unstable initial orientation (001) [110] in channel die compression, Metallurgical Transactions A, vol.30, issue.1, pp.45-58, 1991.
DOI : 10.1016/0001-6160(82)90005-0

F. R. Nabarro, Z. S. Basinski, and D. B. Holt, The plasticity of pure single crystals Advanced Physics, 1964.

C. Y. Chiem and J. Duffy, Strain rate history effects and observations of dislocation substructure in aluminum single crystals following dynamic deformation, Materials Science and Engineering, vol.57, issue.2, pp.233-247, 1983.
DOI : 10.1016/0025-5416(83)90213-6

F. R. Nabarro, Work hardening and dynamical recovery of FCC metals in multiple glide, Acta Metall, pp.1521-1546, 1989.

H. Mecking, B. Nicklas, N. Zarubova, and U. F. Kocks, A ???universal??? temperature scale for plastic flow, Acta Metallurgica, vol.34, issue.3, pp.527-535, 1986.
DOI : 10.1016/0001-6160(86)90088-X

P. Franciosi, M. Berveiller, and A. Zaoui, Latent hardening in copper and aluminium single crystals, Acta Metallurgica, vol.28, issue.3, pp.273-283, 1980.
DOI : 10.1016/0001-6160(80)90162-5

J. F. Bell, Generalized large deformation behaviour for face-centred cubic solids: Nickel, aluminium, gold, silver and lead, Philosophical Magazine, vol.50, issue.114, pp.1135-1156, 1956.
DOI : 10.1080/14786436208211866

M. E. Kassner, M. A. Wall, and M. A. , Primary and secondary dislocation dipole heights in cyclically deformed copper single crystals, Materials Science and Engineering: A, vol.317, issue.1-2, pp.28-31, 2001.
DOI : 10.1016/S0921-5093(01)01195-9

M. E. Kassner, In-situ cyclic deformed of Al single crystals in the HVEM and the concept of internal backstresses, Mater. Sci. Engng. A, pp.234-236, 1997.

D. K. Bowen, J. W. Christian, and T. , DEFORMATION PROPERTIES OF NIOBIUM SINGLE CRYSTALS, Canadian Journal of Physics, vol.45, issue.2, p.903, 1967.
DOI : 10.1139/p67-069

J. G. Gardiner and J. A. Weiss, Simple Shear Testing of Parallel-Fibered Planar Soft Tissues, Journal of Biomechanical Engineering, vol.123, issue.2, pp.170-175, 2001.
DOI : 10.1115/1.1351891

E. F. Rauch, Etude de l'écrouissage des métaux, aspects microstructuraux et lois de comportement, 1993.

K. Miyaushi, Sci. papers of I.P.C.R, 78, 1984.

P. Vacher, Apport des techniques de corrélation d'images en mécanique : Mesure de déformations et numérisations 3D, Habilitation à Diriger des Recherches, 2003.

T. Coudert, Reconstruction tridimensionnelle du volume intérieur d'une chaussure : évaluation du chaussant, Thèse de Doctorat, 2005.

H. Louche, Analyse par thermographie infrarouge des effets dissipatifs de la localisation dans les aciers, PhD Dissertation, 1999.

A. Chrysochoos and H. Louche, An infrared image processing to analyse the calorific effects accompanying strain localisation, International Journal of Engineering Science, vol.38, issue.16, pp.1759-1788, 2000.
DOI : 10.1016/S0020-7225(00)00002-1

F. Papini and P. Gallet, Thermographie infrarouge-Tmage et mesure, 1994.

G. Gaussorgues, La thermographie infrarouge, 1989.

A. Chrysochoos, Dissipation et blocage d'énergie lors d'un écrouissage en traction simple, Thèse de Doctorat, 1987.

J. R. Rice, Inelastic constitutive relations for solids: An internal-variable theory and its application to metal plasticity, Journal of the Mechanics and Physics of Solids, vol.19, issue.6, pp.433-455, 1971.
DOI : 10.1016/0022-5096(71)90010-X