. Bibliographie and . Bonnotte, Étude des propriétés mécaniques des films minces Application au silicium monocristallin, 1994.

B. Trolard, Étude Par Interférométrie de la Déformation de Membranes Silicium et Calcul de Filtres Numériques Ou Optiques Adaptés Au Traitement Des Interférogrammes, 1996.

A. Sergent, Caractérisation Mécanique Des Matériaux Pour Les Microsystèmes Par L'essai de Flexion, 1997.

D. Campbell, Mechanical Properties of Thin Films, chapter 12, 1970.

R. Hoffman, The mechanical properties of thin condensed films, Physics of thin films, vol.3, p.211, 1966.

G. Stoney, The Tension of Metallic Films Deposited by Electrolysis, Proc. Roy. Soc, pp.172-175, 1909.
DOI : 10.1098/rspa.1909.0021

J. Schweitz, Mechanical Characterization of Thin Films by Micromechanical Techniques, MRS Bulletin, vol.15, issue.07, pp.34-45, 1992.
DOI : 10.1179/sur.1986.2.3.183

K. Petersen, Silicon as a mechanical material, Proceeding of the IEEE, 1982.

J. Lebrun, Contraintes résiduelles et hétérogénéités de structures et de déformations : Classification et méthodes expérimentales de détermination, Mécanisme et Mécanique Des Matériaux Multifonctionnels, p.41, 1997.

K. Inal and J. Lebrun, Approches num??riques et exp??rimentales du passage micro-macro dans des aciers aust??no-ferritiques, 40e Colloque de Métallurgie, pp.69-74, 1998.
DOI : 10.1051/jp4:1998408

J. Zhang, Two-dimensional in-plane electronic speckle pattern interferometer and its application to residual stress determination, Optical Engineering, vol.37, issue.8, pp.2402-2409, 1998.
DOI : 10.1117/1.602007

M. Pechersky, R. Miller, and C. Vikram, Residual stress measurements with laser speckle correlation interferometry and local heat treating, Optical Engineering, vol.34, issue.10, pp.2964-2971, 1995.
DOI : 10.1117/12.210762

Y. Shen and S. Suresh, Thermal cycling and stress relaxation response of Si-Al and Si-Al-SiO2 layered thin films, Acta Metallurgica et Materialia, vol.43, issue.11, pp.3915-3926, 1995.
DOI : 10.1016/0956-7151(95)00099-H

P. , A. , and T. Sullivan, Mechanical properties of thin films, Annu. Rev. Mater. Sci, vol.20, pp.391-420, 1990.

X. Ding, W. Ko, and J. Mansour, Residual stress and mechanical properties of borondoped p + silicon films, Sensors and Actuators, pp.866-871, 1990.

S. Rosenberg, P. Wong, and I. Miaoulis, Analysis of deposition stress during thin???film growth on a relaxing substrate, Journal of Applied Physics, vol.77, issue.12, pp.6273-6277, 1995.
DOI : 10.1063/1.359094

J. Turlo, Measuring thin film stress in metallizations and passivations. Solid state technology, pp.3-9, 1996.

A. Evans and J. Hutchinson, The thermomechanical integrity of thin films and multilayers, Acta Metallurgica et Materialia, vol.43, issue.7, pp.2507-2530, 1995.
DOI : 10.1016/0956-7151(94)00444-M

G. Schwuttke and J. Howard, X???Ray Stress Topography of Thin Films on Germanium and Silicon, Journal of Applied Physics, vol.39, issue.3, pp.1581-1591, 1968.
DOI : 10.1063/1.1656399

P. Goudeau, K. Badawi, G. Naudon, and . Gladyszewski, Determination of the residual stress tensor in Cu/W multilayers by x???ray diffraction, Applied Physics Letters, vol.62, issue.3, pp.246-248, 1993.
DOI : 10.1063/1.108979

I. De-wolf, H. Vanhellemont, and . Maes, Non-destructive assesment of thin film stresses and crystal quality of silicon on insulator materials with Raman spectroscopy, Thin Films : Stresses and Mechanical Properties II, pp.53-58, 1990.

S. Boultadakis, . Logothetidis, . Papadopoulos, P. Vouroutzis, . Zorba et al., films: Influence of oxidation procedure on oxide quality and stress, Journal of Applied Physics, vol.78, issue.6, pp.4164-4173, 1995.
DOI : 10.1063/1.359876

W. Daum, H. Krause, and H. Ibach, Identification of strained silicon layers at Si?SiO 2 interfaces and clean Si surfaces by nonlinerar optical spectroscopy, Phys. Rev. Lett, issue.8, pp.711234-1237, 1993.

C. Su and M. Wuttig, mechanical relaxation of Cu films growing on a Si substrate, Applied Physics Letters, vol.63, issue.25, pp.3437-3439, 1993.
DOI : 10.1063/1.110138

R. Ulrich and G. Zhao, A new apparatus for measuring the ultimate strain of thin films, Thin Solid Films, vol.224, issue.1, pp.63-68, 1993.
DOI : 10.1016/0040-6090(93)90459-3

S. Lin and I. Pugacz-muraskiewicz, Films on Si Substrates, Journal of Applied Physics, vol.43, issue.1, pp.119-125, 1972.
DOI : 10.1063/1.1660794

M. Mehregany, R. Howe, and S. Senturia, measurement of mechanical properties of thin films, Journal of Applied Physics, vol.62, issue.9, pp.3579-3584, 1987.
DOI : 10.1063/1.339285

S. Hong, T. Weith, J. Bravman, and W. Nix, The Determination of Mechanical Parameters and Residual Stresses for Thin Films Using Micro-Cantilever Beams, Thin Films : Stresses and Mechanical Properties, pp.93-98, 1989.
DOI : 10.1063/1.1661935

S. Roy, M. Furukawa, and . Mehregany, Determination of Young's modulus ans residual stress of electroless nickel using test structures fabricated in a new surface micromachining process. Microsys, pp.92-96, 1996.

M. Boutry, Étude de Microdispositifs de Test Pour la Caractérisation de Propriétés Mécaniques de Films Minces Métalliques, 1997.

M. Elwenspoek, On the Mechanism of Anisotropic Etching of Silicon, Journal of The Electrochemical Society, vol.140, issue.7, pp.2075-2080, 1993.
DOI : 10.1149/1.2220767

D. Gray, Handbook of Physics, 1972.

S. Johansson, J. Ericson, and . Schweitz, Influence of surface coatings on elasticity, residual stresses, and fracture properties of silicon microelements, Journal of Applied Physics, vol.65, issue.1, pp.122-128, 1989.
DOI : 10.1063/1.342585

S. Sze, Semi-Conductor Devices, Physics and Technologie, 1985.

E. Yang, S. Yang, and S. Yoo, silicon films, Applied Physics Letters, vol.67, issue.7, pp.912-914, 1995.
DOI : 10.1063/1.114692

J. Varner, Holographic contouring methods, Handbook of optical holography, pp.595-600, 1979.

G. Jaisingh and F. Chiang, Contouring by laser speckle, Applied Optics, vol.20, issue.19, pp.3385-3387, 1981.
DOI : 10.1364/AO.20.003385

Y. Zou, H. Diao, H. Peng, and . Tiziani, Geometry for contouring by electronic speckle pattern interferometry based on shifting illumination beams, Applied Optics, vol.31, issue.31, pp.316616-6621, 1992.
DOI : 10.1364/AO.31.006616

R. Rodríguez-vera and M. Kerr, Electronic speckle contouring, Journal of the Optical Society of America A, vol.9, issue.11, pp.2000-2008, 1992.
DOI : 10.1364/JOSAA.9.002000

O. Kafri and I. Glatt, High-sensitivity reflection-transmission moire deflectometer, Applied Optics, vol.27, issue.2, pp.351-353, 1988.
DOI : 10.1364/AO.27.000351

J. Burry, Contouring in real time with moir?? interference, Optics Communications, vol.41, issue.4, pp.243-248, 1982.
DOI : 10.1016/0030-4018(82)90423-0

G. Sansoni, . Corini, . Lazzari, F. Rodella, and . Docchio, Three-dimensional imaging based on Gray-code light projection: characterization of the measuring algorithm and development of a measuring system for industrial applications, Applied Optics, vol.36, issue.19, pp.4463-4472, 1997.
DOI : 10.1364/AO.36.004463

P. Jacquot, X. Colona-de-lega, and P. Boone, Common-path holographic interferometer for flatness testing, Optical Measurements and Sensors for the Process Industries, pp.125-135, 1994.
DOI : 10.1117/12.194311

W. Jaerisch and G. Makosch, Interferometric surface mapping with variable sensitivity, Applied Optics, vol.17, issue.5, pp.740-743, 1978.
DOI : 10.1364/AO.17.000740

P. Groot, Grating interferometer for flatness testing, Optics Letters, vol.21, issue.3, pp.228-230, 1996.
DOI : 10.1364/OL.21.000228

É. Bonnotte, . Delobelle, . Bornier, G. Trolard, and . Tribillon, Two interferometric methods for the mechanical characterization of thin films by bulging tests. Application to single crystal of silicon, Journal of Materials Research, vol.5, issue.09, pp.2234-2248, 1997.
DOI : 10.1063/1.323119

X. , D. Lega, and P. Jacquot, Deformation measurement with object-induced dynamic phase shifting, Appl. Opt, vol.35, issue.25, pp.5115-5121, 1996.

K. Creath and J. Wyant, Comparison of interferometric contouring techniques, Optical Testing and Metrology II, pp.174-182, 1988.

D. Bone, H. Bachor, and R. Sandeman, Fringe-pattern analysis using a 2-D Fourier transform, Applied Optics, vol.25, issue.10, pp.1653-1660, 1986.
DOI : 10.1364/AO.25.001653

C. Quan, H. Shang, and P. Bryanston-cross, Application of the holographic carrier fringe and FFT technique for deformation measurement, Optics & Laser Technology, vol.28, issue.1, pp.7-13, 1996.
DOI : 10.1016/0030-3992(95)00064-X

G. Lai and T. Yatagi, Use of the fast Fourier transform method for analyzing linear and equispaced Fizeau fringes, Applied Optics, vol.33, issue.25, pp.5935-5940, 1994.
DOI : 10.1364/AO.33.005935

K. Creath, Phase-shifting speckle interferometry, Applied Optics, vol.24, issue.18, pp.3053-3058, 1985.
DOI : 10.1364/AO.24.003053

P. Hariharan, T. Oreb, and . Eiju, Digital phase-shifting interferometry: a simple error-compensating phase calculation algorithm, Applied Optics, vol.26, issue.13, pp.2504-2506, 1987.
DOI : 10.1364/AO.26.002504

K. Stetson, Phase-step interferometry of irregular shapes by using an edge-following algorithm, Applied Optics, vol.31, issue.25, pp.5320-5325, 1992.
DOI : 10.1364/AO.31.005320

V. Gorel, Caractérisation optique et élastoplastique d'un capteur interférométrique de pression intégré sur silicium, 1996.

C. Brophy, Effect of intensity error correlation on the computed phase of phase-shifting interferometry, Journal of the Optical Society of America A, vol.7, issue.4, pp.537-541, 1990.
DOI : 10.1364/JOSAA.7.000537

J. Wortman and R. Evans, Young's Modulus, Shear Modulus, and Poisson's Ratio in Silicon and Germanium, Journal of Applied Physics, vol.36, issue.1, pp.153-156, 1965.
DOI : 10.1063/1.1713863

D. , C. , and W. Buessem, The elastic anisotropy of crystals, J. Appl. Phys, vol.38, issue.5, pp.2010-2012, 1967.

W. Brantley, Calculated elastic constants for stress problems associated with semiconductor devices, Journal of Applied Physics, vol.44, issue.1, pp.534-535, 1973.
DOI : 10.1063/1.1661935

D. Baral, J. Hilliard, J. Ketterson, and K. Miyano, Determination of the primary elastic constants from thin foils having a strong texture, Journal of Applied Physics, vol.53, issue.5, pp.3552-3559, 1982.
DOI : 10.1063/1.331134

R. Jaccodine and W. Schlegel, Interface, Journal of Applied Physics, vol.37, issue.6, pp.2429-2434, 1966.
DOI : 10.1063/1.1708831

E. Van-de-riet, Deflection of a substrate induced by an anisotropic thin???film stress, Journal of Applied Physics, vol.76, issue.1, pp.584-586, 1994.
DOI : 10.1063/1.358434

J. Jou and L. Hsu, Stress analysis of elastically anisotropic bilayer structures, Journal of Applied Physics, vol.69, issue.3, pp.1384-1388, 1991.
DOI : 10.1063/1.347277

B. Boley and J. Weiner, Theory of Thermal Stresses, 1960.

K. Röll, Analysis of stress and strain distribution in thin films and substrates, Journal of Applied Physics, vol.47, issue.7, p.3224, 1976.
DOI : 10.1063/1.323119

P. Townsend, D. Barnett, and T. Brunner, Elastic relationships in layered composite media with approximation for the case of thin films on a thick substrate, Journal of Applied Physics, vol.62, issue.11, pp.4438-4444, 1987.
DOI : 10.1063/1.339082

J. Schweitz, A new and simple micromechanical approach to the stress-strain characterization of thin coatings, Journal of Micromechanics and Microengineering, vol.1, issue.1, pp.10-15, 1991.
DOI : 10.1088/0960-1317/1/1/003

A. Witvrouw and F. Spaepen, Determination of the plane stress elastic constants of thin films from substrate curvature measurements: Applications to amorphous metals, Journal of Applied Physics, vol.73, issue.11, pp.7344-7350, 1993.
DOI : 10.1063/1.354025

A. Ennos, Stresses Developed in Optical Film Coatings, Applied Optics, vol.5, issue.1, pp.51-61, 1966.
DOI : 10.1364/AO.5.000051

Y. Tsukamoto, M. Yamaguchi, and . Yanagisawa, Mechanical properties of thin films: Measurements of ultramicroindentation hardness, Young's modulus and internal stress, Thin Solid Films, vol.154, issue.1-2, pp.171-181, 1987.
DOI : 10.1016/0040-6090(87)90362-2

H. Miura, N. Ohta, and . Okamoto, Crystallization???induced stress in silicon thin films, Applied Physics Letters, vol.60, issue.22, pp.2746-2748, 1992.
DOI : 10.1063/1.106864

D. Gardner and P. Flinn, Mechanical stress as a function of temperature in aluminum films, IEEE Transactions on Electron Devices, vol.35, issue.12, pp.2160-2169, 1988.
DOI : 10.1109/16.8790

G. Leusink, T. Oosterlaken, B. Janssen, and S. Radelaar, sensitive measurement of stress in thin films, Review of Scientific Instruments, vol.63, issue.5, pp.3143-3146, 1992.
DOI : 10.1063/1.1142567

A. Sinha, H. J. Levinstein, and T. Smith, Thermal stresses and cracking resistance of dielectric films (SiN, Si3N4, and SiO2) on Si substrates, Journal of Applied Physics, vol.49, issue.4, pp.2423-2426, 1978.
DOI : 10.1063/1.325084

A. Witvrouw and F. Spaepen, Determination of Elastic Constants and Viscosity of Amorphous Thin Films From Substrate Curvature, Thin Films : Stresses and Mechanical Properties II, pp.147-152, 1990.
DOI : 10.1016/0956-716X(90)90183-H

W. Tjhen, C. Tamagawa, C. Ye, . Hsueh, D. Schiller et al., Properties of piezoelectric thin films for micromechanical devices and systems, [1991] Proceedings. IEEE Micro Electro Mechanical Systems, pp.114-119, 1991.
DOI : 10.1109/MEMSYS.1991.114780

W. Fang and J. Wickert, Determining mean and gradient residual stresses in thin films using micromachined cantilevers, Journal of Micromechanics and Microengineering, vol.6, issue.3, pp.301-309, 1996.
DOI : 10.1088/0960-1317/6/3/002

P. Vretenar, Mechanical stresses in oxide thin films, Vacuum, vol.43, issue.5-7, pp.727-729, 1992.
DOI : 10.1016/0042-207X(92)90119-H

A. Plata, Algorithmes de Détection de Phase Dédiés À L'interférométrie En Lumière Polychromatique : Application et Apport Des Systèmes Adaptatifs À la Profilométrie, 1997.

P. Sandoz, A. Devillers, and . Plata, Unambiguous profilometry by fringe-order identification in white-light phase-shifting interferometry, Journal of Modern Optics, vol.12, issue.3, pp.519-534, 1997.
DOI : 10.1080/09500349708232918

C. Masters, N. J. Salamon, and D. Fahnline, Deflection Shapes Due to Intrinsic Stress in Thin Films, Thin Films
DOI : 10.1364/JOSA.11.000233

A. Permuy, Capteurs microélectroniques, Traité Électronique, pp.2-315, 1993.

W. Pliskin and E. Conrad, For thermally grown SiO 2 films observed perpendicularly under daylight fluorescent lighting, IBM J. of R.&D, vol.8, issue.43, 1964.

F. Pourahmadi, K. Barth, and . Petersen, Modeling of thermal and mechanical stresses in silicon microstructures, Sensors and Actuators A: Physical, vol.23, issue.1-3, pp.850-855, 1990.
DOI : 10.1016/0924-4247(90)87045-K

C. Poilâne, . Delobelle, . Bornier, . Mounaix, D. Melique et al., Determination of the mechanical properties of thin polyimide films deposited on a GaAs substrate by bulging and nanoindentation tests, Materials Science and Engineering: A, vol.262, issue.1-2, pp.101-106, 1999.
DOI : 10.1016/S0921-5093(98)01002-8

P. Salzenstein, . Dupis, . Helal, . Lheurette, . Vanbésien et al., Coplanar waveguides on dielectric membranes micromachined on a GaAs substrate, Electronics Letters, vol.32, issue.9, p.821, 1996.
DOI : 10.1049/el:19960564

S. Timoshenko and S. Woinowsky-krieger, Theory of Plates and Shells, 1959.

T. Tsakalakos, The bulge test: A comparison of the theory and experiment for isotropic and anisotropic films, Thin Solid Films, vol.75, issue.3, pp.293-305, 1981.
DOI : 10.1016/0040-6090(81)90407-7

O. Tabata, . Kawahata, I. Sugiyama, and . Igarashi, Mechanical property measurements of thin films using load-deflection of composite rectangular membranes, Sensors and Actuators, vol.20, issue.1-2, pp.135-141, 1989.
DOI : 10.1016/0250-6874(89)87111-2

P. Lin, S. Senturia, M. Doerner, G. Oliver, F. Pharr et al., The In-Situ Measurement of Biaxial Modulus and Residual Stress of Multi-Layer Polymeric Thin Films, Thin Films : Stresses and Mechanical Properties II, pp.41-46, 1991.
DOI : 10.1080/00218468308074909

M. Small and W. Nix, Analysis of the accuracy of the bulge test in determining the mechanical properties of thin films, Journal of Materials Research, vol.41, issue.06, pp.1553-1563, 1992.
DOI : 10.1016/0040-6090(81)90407-7

D. Maier-schneider, J. Maibach, and E. Obermeier, A new analytical solution for the load-deflection of square membranes, Journal of Microelectromechanical Systems, vol.4, issue.4, pp.238-241, 1995.
DOI : 10.1109/84.475551

P. Boisse, Modèles Mécaniques et Numériques Pour L'analyse Non-Linéaire Des Structures Minces, Thèse d'habilitation à diriger les recherches, 1994.

S. Paletto and G. Fantozzi, Nanoindentation : Théorie et applications, pp.139-160, 1993.

W. Oliver and G. Pharr, An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments, Journal of Materials Research, vol.XI, issue.06, p.1564, 1992.
DOI : 10.1557/JMR.1992.0613

I. Sneddon, The relation between load and penetration in the axisymetric Boussinesq problem for a punch of arbitrary profile, Int. J. Eng. Sci, vol.3, pp.45-57, 1965.

K. Petersen and C. Guarnieri, Young???s modulus measurements of thin films using micromechanics, Journal of Applied Physics, vol.50, issue.11, pp.6761-6766, 1979.
DOI : 10.1063/1.325870

D. Schneider, B. Schwarz, and . Schultrich, Determination of elastic modulus and thickness of surface layers by ultrasonic surface waves, Thin Solid Films, vol.219, issue.1-2, pp.92-102, 1992.
DOI : 10.1016/0040-6090(92)90728-T

A. Sergent, . Robert, L. Delobelle, and . Bornier, Caract??risation m??canique de micro-poutres par l'essai de flexion associ?? ?? une technique d'imagerie, Journal de Physique III, vol.7, issue.11, pp.2107-2129, 1997.
DOI : 10.1051/jp3:1997244

C. Poilâne, Détermination du déplacement dans le plan d'une éprouvette mince par métrologie \textit{speckle}, 1994.

D. Hardwick, The mechanical properties of thin films: A review, Thin Solid Films, vol.154, issue.1-2, pp.109-124, 1987.
DOI : 10.1016/0040-6090(87)90357-9

A. Jankowski and T. Tsakalakos, Enhanced elastic modulus in composition modulated copper???nickel???iron foils, Journal of Applied Physics, vol.57, issue.6, pp.1835-1838, 1985.
DOI : 10.1063/1.334411

I. Noyan and G. Sheikh, X-ray tensile testing of thin films, Journal of Materials Research, vol.20, issue.04, pp.764-770, 1993.
DOI : 10.1016/S0040-6090(05)80043-4

D. Read and J. Dally, A new method for measuring the strength and ductility of thin films, Journal of Materials Research, vol.20, issue.07, pp.1542-1549, 1993.
DOI : 10.1063/1.1657233

H. Ogawa, Y. Ishikawa, and T. Kitahara, Micro tensile testing of small-sized thin sheet metals, 2nd Japan-France Congress on Mechatronics, pp.465-467, 1997.

S. Nakadate, H. Yatagai, and . Saito, Electronic speckle pattern interferometry using digital image processing techniques, Applied Optics, vol.19, issue.11, pp.1879-1883, 1980.
DOI : 10.1364/AO.19.001879

L. Pirodda, Conjugate wave holographic interferometry for the measurement of in-plane deformations, Applied Optics, vol.28, issue.10, pp.1842-1844, 1989.
DOI : 10.1364/AO.28.001842

J. Butters and J. Leendertz, A double exposure technique for speckle pattern interferometry, Journal of Physics E: Scientific Instruments, vol.4, issue.4, pp.277-279, 1971.
DOI : 10.1088/0022-3735/4/4/004

E. Archbold and A. Ennos, Displacement Measurement from Double-exposure Laser Photographs, Optica Acta: International Journal of Optics, vol.18, issue.4, pp.253-271, 1972.
DOI : 10.1080/713818559

A. Oulamara, J. Tribillon, and . Duvernoy, Subpixel Speckle Displacement Measurement Using a Digital Processing Technique, Journal of Modern Optics, vol.22, issue.7, pp.1201-1211, 1988.
DOI : 10.1364/JOSA.61.000559

D. Ducan, S. J. Kirkpatrick, F. Mark, and L. Hunter, Transform method of processing for speckle strain-rate measurements, Applied Optics, vol.33, issue.22, pp.5177-5186, 1994.
DOI : 10.1364/AO.33.005177

C. Joenathan, . Franze, H. Haible, and . Tiziani, Large in-plane displacement measurement in dual-beam speckle interferometry using temporal phase measurement, Journal of Modern Optics, vol.45, issue.9, pp.1975-1984, 1998.
DOI : 10.1364/AO.33.007829

J. Sirkis and T. Lim, Displacement and strain measurement with automated grid methods, Experimental Mechanics, vol.29, issue.2, pp.382-388, 1991.
DOI : 10.1007/BF02325997

M. Tu, F. Mckelvie, D. Dai, and . Post, Grating speckle method for in-plane displacement measurement, Applied Optics, vol.28, issue.16, pp.3354-3357, 1989.
DOI : 10.1364/AO.28.003354

C. Sciammarella and G. Bhat, High resolution computer aided moiré, Moiré Techniques , Holographic Interferometry, Optical NDT, and Applications to Fluid Mechanics, volume 1554B, pp.163-173, 1991.

J. Goodman, Statistical properties of laser speckle patterns, Laser Speckle and Related Phenomena, pp.9-74, 1975.

P. Jacquot, Photographie de speckle, Presses Polytechniques Romandes, pp.149-204, 1982.

Q. Li and F. Chi, Three-dimentionnal dimension of laser speckle, Appl. Opt, issue.29, pp.316287-6291, 1992.

J. Huntley, An image processing system for the analysis of speckle photographs, Journal of Physics E: Scientific Instruments, vol.19, issue.1, pp.227-233, 1986.
DOI : 10.1088/0022-3735/19/1/007

D. , C. , and F. Chiang, Optimal sampling and range of measurement in displacementonly laser-speckle correlation, Experimental Mechanics, pp.145-153, 1992.

J. Dainty, Laser Speckle and Related Phenomena, volume 9 of Topics in Applied Physics, 1975.

M. Françon, La Granularité Laser (speckle) et ses Applications, 1978.

F. Ansari and G. Ciurpita, Automated fringe measurement in speckle photography, Applied Optics, vol.26, issue.9, pp.1688-1692, 1987.
DOI : 10.1364/AO.26.001688

J. Kim, Range and accuracy of speckle displacement measurement in double-exposure speckle photography, Journal of the Optical Society of America A, vol.6, issue.5, pp.665-681, 1989.
DOI : 10.1364/JOSAA.6.000675

D. , C. , and F. Chiang, Computer-aided speckle interferometry using spectral amplitude fringes, Appl. Opt, vol.32, issue.2, pp.225-236, 1993.

N. Deng and I. Yamaguchi, Automatic analysis of speckle photographs with extended range and improved accuracy, Applied Optics, vol.29, issue.2, pp.296-303, 1990.
DOI : 10.1364/AO.29.000296

W. Pei and F. Song, Automatic specklegram fringe analysis by using symmetry evaluation of the ??-scanning function, Applied Optics, vol.31, issue.5, pp.665-669, 1992.
DOI : 10.1364/AO.31.000665

V. Shapiro, V. Kavardjikov, and S. Atanassov, Approach to automatic analysis of Young???s fringes in speckle photography, Applied Optics, vol.32, issue.23, pp.4378-4387, 1993.
DOI : 10.1364/AO.32.004378

J. Huntley, Speckle photography fringe analysis: assessment of current algorithms, Applied Optics, vol.28, issue.20, pp.4316-4322, 1989.
DOI : 10.1364/AO.28.004316

G. Smith and K. Stetson, Heterodyne readout of specklegram halo interference fringes, Applied Optics, vol.19, issue.18, pp.3031-3033, 1980.
DOI : 10.1364/AO.19.003031

G. Kaufmann and P. Jacquot, Phase shifting of whole-field fringes in dual-plate speckle photography, Applied Optics, vol.31, issue.17, pp.3201-3203, 1992.
DOI : 10.1364/AO.31.003201

G. Kaufmann, Numerical processing of speckle photography data by Fourier transform, Applied Optics, vol.20, issue.24, pp.4277-4280, 1981.
DOI : 10.1364/AO.20.004277

Y. Kobayashi, . Takemori, . Mukohzaka, S. Yoshida, and . Fukushima, Real-time velocity measurement by the use of a speckle-pattern correlation system that incorporates a ferroelectric liquid-crystal spatial light modulator, Applied Optics, vol.33, issue.14, pp.2785-2794, 1994.
DOI : 10.1364/AO.33.002785

M. Sjödahl, Electronic speckle photography: increased accuracy by nonintegral pixel shifting, Applied Optics, vol.33, issue.28, pp.6667-6673, 1994.
DOI : 10.1364/AO.33.006667

S. Mguil-berthaud, . Cottron, . Morestin, M. Moucheront, and . Taroni, Mesure des déformations par corrélation directe d'images numériques, Étude du Comportement des Matériaux et des Structures, pp.361-368, 1998.

M. Sjödahl and L. Benckert, Electronic speckle photography: analysis of an algorithm giving the displacement with subpixel accuracy, Applied Optics, vol.32, issue.13, pp.2278-2284, 1993.
DOI : 10.1364/AO.32.002278

M. Sjödahl, Accuracy in electronic speckle photography, Applied Optics, vol.36, issue.13, pp.2875-2885, 1997.
DOI : 10.1364/AO.36.002875

T. Takemori, I. Fujita, and . Yamaguchi, <title>Resolution improvement in speckle displacement and strain sensor by correlation interpolation</title>, Laser Interferometry IV: Computer-Aided Interferometry, pp.137-148, 1991.
DOI : 10.1117/12.135299

D. Chen, F. Chiang, Y. Tan, and H. Don, Computer-aided speckle interferometry (CASI) : Part II. An alternate approach using spectral amplitude and phase information, Speckle Techniques, Birefringence Methods, and Applications to Solid Mechanics, pp.706-717, 1991.

É. Lantz, Subpixel signal centering and shift measurement using a recursive spectral phase algorithm, Signal Processing, vol.17, issue.4, pp.365-372, 1989.
DOI : 10.1016/0165-1684(89)90121-7

L. Oriat and É. Lantz, Subpixel detection of the center of an object using a spectral phase algorithm on the image, Pattern Recognition, vol.31, issue.6, pp.761-771, 1998.
DOI : 10.1016/S0031-3203(97)00087-3

J. Gu and F. Chen, Fourier-transformation, phase-iteration, and least-square-fit image processing for Young's fringe pattern, Applied Optics, vol.35, issue.2, pp.232-239, 1996.
DOI : 10.1364/AO.35.000232

A. Ogiwara and J. Ohtsubo, Accuracy of peak detection in speckle clipping correlation, Applied Optics, vol.29, issue.17, pp.2632-2639, 1990.
DOI : 10.1364/AO.29.002632

J. Pérez, Optique, Fondements et Applications, 1996.

H. Bruck, S. Mcneill, M. Sutton, and W. Peters, Digital image correlation using Newton-Raphson method of partial differential correction, Experimental Mechanics, vol.19, issue.12, pp.261-267, 1989.
DOI : 10.1007/BF02321405

A. Sergent, C. Poilâne, P. Robert, and . Delobelle, La nano-indentation, le gonflement de film et la flexion de poutre ; trois essais complémentaires pour caractériser les propriétés 218 BIBLIOGRAPHIE mécaniques des matériaux en faibles épaisseurs. Application au cas du nickel électrodéposé, 40e Colloque de Métallurgie, pp.259-265, 1998.
DOI : 10.1051/jp4:1998432

J. Ruud, . Josell, A. Spaepen, and . Greer, A new method for tensile testing of thin films, Journal of Materials Research, vol.8, issue.1, pp.112-117, 1993.
DOI : 10.1557/JMR.1993.0112