]. E. Marechal, P. H. Geil, V. B. Gupta, Z. , E. Stoyko et al., Handbook of thermoplastic polyesters, Effect of the Sb2O3 catalyst on the solid-state postpolycondensation of poly(ethylene terephthalate) Journal of Applied Polymer Science, pp.787-791, 1995.

S. Tate, Y. Watanabe, and A. Chiba, Synthesis of ultra-high molecular weight poly(ethylene terephthalate) by swollen-state polymerization, Polymer, vol.34, issue.23, pp.4974-4977, 1993.
DOI : 10.1016/0032-3861(93)90029-A

]. J. Besnoin and K. Y. Choi, Identification and characterization of reaction byproducts in the polymerization of poly(ethylene teraphthalate) », in Journal of Macromolecular Science -Reviews in Macromolecular Physics, C29, Formation of cyclic oligo(ethylene terephthalate) Journal of the Korean Society of Textile Engineers and Chemists, pp.55-81, 1985.

]. D. Yoo, W. S. Ha, and . Ester, interchange of poly(ethylene terephthalate) and cyclic oligomer formation, Journal of the Korean Society of Textile Engineers and Chemists, pp.30-35, 1989.

]. J. Cho, J. H. Youk, D. I. Ko, D. I. Yoo, W. S. Ha et al., Carlo simulation on the formation of cyclic oligomer by ester interchange reaction in poly(ethylene terephthalate), Polymer, vol.22, issue.7, pp.99-105, 1998.

P. , D. F. Auriemma, P. Corradini, C. De-rosa, G. Guerra et al., Cristallisation et comportement rhéologique d'un composite PET/fibres de verres, Thèse de l'Université Lyon I, On the mesomorphic Form of Poly(ethylene terephthalate) Macromolecules, pp.2490-2497, 1991.

W. Gabiëlse, H. Angad-gaur, F. C. Feyen, and V. S. Veeman, « Solid-state NMR studies of differently processed poly(ethylene terephthalate) yarns, Macromolecules, pp.5811-5820, 1994.

R. S. Moore, J. K. O-'loane, and J. C. Shearer, Fourier transform infrared characterization of conformational changes in amorphous poly(ethylene terephthalate) during volume recovery, Polymer Engineering and Science, vol.19, issue.14, pp.903-906, 1981.
DOI : 10.1002/pen.760211405

A. Miyake, The infrared spectrum of polyethylene terephthalate. I The effect of crystallization, Journal of Polymer Science, vol.38, issue.134, pp.479-495, 1959.
DOI : 10.1002/pol.1959.1203813419

F. Villain, J. Coudane, and M. Vert, Thermal degradation of polyethylene terephthalate: study of polymer stabilization, Polymer degradation and stability, pp.393-397, 1995.
DOI : 10.1016/0141-3910(95)00121-2

R. P. Daubeny and C. W. Bunn, The Crystal Structure of Polyethylene Terephthalate, Proceedings of the Royal Society of, pp.531-542, 1954.
DOI : 10.1098/rspa.1954.0273

J. R. Atkinson, F. Biddlestone, and J. N. Hay, An investigation of glass formation and physical ageing in poly(ethylene terephthalate) by FT-IR spectroscopy, Polymer, vol.41, issue.18, pp.6965-6968, 2000.
DOI : 10.1016/S0032-3861(00)00017-3

C. Bai, R. J. Spontak, C. C. Koch, and C. K. Saw, Structural changes in poly(ethylene terephthalate) induced by mechanical milling, Polymer, vol.41, issue.19, pp.7147-7157, 2000.
DOI : 10.1016/S0032-3861(00)00048-3

M. Avrami, Kinetics of Phase Change. I General Theory, The Journal of Chemical Physics, vol.7, issue.12, pp.1103-212, 1939.
DOI : 10.1063/1.1750380

F. Van-antwerpen, D. W. Van, and . Krevelen, Influence of crystallization temperature, molecular weight, and additives on the crystallization kinetics of poly(ethylene terephthalate), Journal of Polymer Science Part A-2: Polymer Physics, vol.10, issue.12, pp.2423-2435, 1972.
DOI : 10.1002/pol.1972.180101211

P. J. Phillips and H. T. Tseng, Influence of pressure on crystallization in poly(ethylene terephthalate) », in Macromolecules, pp.1649-1655, 1989.

T. Ozawa and . Kinetics, Kinetics of non-isothermal crystallization, Polymer, vol.12, issue.3, pp.150-158, 1971.
DOI : 10.1016/0032-3861(71)90041-3

S. A. Jabarin, Crystallization behavior of poly(ethylene terephthalate), Polymer Engineering and Science, vol.3, issue.18, pp.1259-1264, 1989.
DOI : 10.1002/pen.760291808

A. Launay, F. Thominette, and J. Verdu, Hydrolysis of poly(ethylene terephthalate): a kinetic study, Polymer Degradation and Stability, pp.319-324, 1994.
DOI : 10.1016/0141-3910(94)90148-1

H. Zimmermann, Degradation and Stabilisation of polyesters, Developments in Polymer Degradation ? 5, N. Grassie. Applied Science, pp.79-119, 1979.

A. Launay, F. Thominette, and J. Verdu, Hydrolysis of poly(ethylene terephthalate) A steric exclusion chromatography study, Polymer Degradation and Stability, pp.385-389, 1999.

A. Ballara and J. Verdu, « Physical aspects of the hydrolysis of polyethylene terephthalate », in Polymer Degradation and Stability, pp.361-374, 1989.

N. S. Allen, M. Edge, and M. Mohammadian, Hydrolytic degradation of poly(ethylene terephthalate): Importance of chain scission versus crystallinity, European Polymer Journal, pp.1373-1378, 1991.
DOI : 10.1016/0014-3057(91)90237-I

I. C. Mc-neill and M. Bounekhel, « Thermal Degradation Studies of Terephthalate Polyesters : 1-Poly(alkylene terephthalate) », in Polymer Degradation and Stability, pp.187-204, 1991.

G. Montaudo, C. Puglisi, and F. Samperi, « Primary Thermal degradation mechanisms of PET and PBT », in Polymer Degradation and Stability, pp.13-28, 1993.

F. Villain, J. Coudane, and M. Vert, Thermal degradation of polyethylene terephthalate: study of polymer stabilization, Polymer degradation and stability, pp.393-397, 1995.
DOI : 10.1016/0141-3910(95)00121-2

M. Dzieciol and J. Trzeszczynski, Studies of temperature influence on volatile thermal degradation products of poly(ethylene terephthalate), Journal of Applied Polymer Science, vol.69, issue.12, pp.2377-2381, 1998.
DOI : 10.1002/(SICI)1097-4628(19980919)69:12<2377::AID-APP9>3.0.CO;2-5

D. I. Yoo, W. S. Ha, and . Ester, Interchange Reaction of Poly(ethylene Terephthalate) and Cyclic Oligomer Formation, Journal of Korean Society of Textile Engineers and Chemists, vol.26, pp.30-35, 1989.

B. J. Holland and J. N. Hay, The thermal degradation of PET and analogous polyesters measured by thermal analysis???Fourier transform infrared spectroscopy, Polymer, vol.43, issue.6, pp.1835-1847, 2002.
DOI : 10.1016/S0032-3861(01)00775-3

R. Assadi, R. Du, R. Assadi, X. Colin, and J. Verdu, Irreversible structural changes during PET recycling by extrusion, Thèse de l'Ecole Nationale Supérieure d'Arts et Métiers spécialité Mécanique et Matériaux Irreversible structural changes during PET recycling by extrusion, pp.4403-4412, 2002.
DOI : 10.1016/j.polymer.2004.04.029

URL : https://hal.archives-ouvertes.fr/hal-00084164

M. Paci, F. P. La, and «. Mantia, Competition between degradation and chain extension during processing of reclaimed poly(ethylene terephthalate) », in Polymer Degradation and Stability, pp.417-420, 1998.

G. C. Furneaux, K. J. Ledbury, and A. Davis, Photo-oxidation of thick polymer samples???Part I: The variation of photo-oxidation with depth in naturally and artificially weathered low density polyethylene, Polymer Degradation and Stability, vol.3, issue.6, pp.431-442, 1981.
DOI : 10.1016/0141-3910(81)90015-X

A. V. Cunliffe and A. Davis, Photo-oxidation of thick polymer samples???Part II: The influence of oxygen diffusion on the natural and artificial weathering of polyolefins, Polymer Degradation and Stability, pp.17-37, 1982.
DOI : 10.1016/0141-3910(82)90003-9

T. Seguchi, S. Hashimoto, K. Arakawa, W. Hayakawa, W. Kawakami et al., Radiation induced oxidative degradation of polymers???I, Radiation Physics and Chemistry, p.195, 1981.
DOI : 10.1016/0146-5724(81)90331-9

K. T. Gilen and R. L. Clough, « Techniques for monitoring heterogeneous oxidation of polymers », in Handbook of Polymer Science and Technology, p.167, 1989.

L. Audouin, V. Langlois, J. Verdu, J. C. De, «. Bruijn et al., Role of oxygen diffusion in polymer ageing: kinetic and mechanical aspects, Journal of Materials Science, vol.23, issue.1, p.569, 1994.
DOI : 10.1007/BF00445968

X. Colin, B. Fayolle, L. Audouin, and J. Verdu, About a quasi-universal character of unstabilised polyethylene thermal oxidation kinetics, Polymer Degradation and Stability, pp.67-74, 2003.
DOI : 10.1016/S0141-3910(02)00384-1

URL : https://hal.archives-ouvertes.fr/hal-00113813

D. V. Sieckle, Oxidation of polypropylene in benzene solution, Journal of Polymer Science Part A-1: Polymer Chemistry, vol.10, issue.2, pp.355-368, 1972.
DOI : 10.1002/pol.1972.150100203

N. Zolotova and E. Denisov, Mechanism of propagation and degenerate chain branching in the oxidation of polypropylene and polyethylene, Journal of Polymer Science Part A-1: Polymer Chemistry, vol.9, issue.11, pp.3311-3320, 1971.
DOI : 10.1002/pol.1971.150091117

F. Gugumus, Re-examination of the role of hydroperoxydes in polyethylene and polypropylene: chemical and physical aspects of hydroperoxydes in polyethylene, Polymer Degradation and Stability, pp.29-50, 1995.

A. Roginsky, « Low temperature oxidation of solid polypropylene », in Developments in Polymer Degradation ? 5, Grassie, vol.6, pp.193-225, 1984.

J. Chien, H. Jabloner, . Polymer, and . Iv, Polymer reactions. IV. Thermal decomposition of polypropylene hydroperoxides, Journal of Polymer Science Part A-1: Polymer Chemistry, vol.6, issue.2, pp.393-402, 1968.
DOI : 10.1002/pol.1968.150060209

G. Botelho, A. Queiros, S. Liberal, and P. Gijsman, « Studies on Thermal and Thermo-oxidative Degradation of Poly(ethylene terephthalate) and Poly(butylene terephthalate) », in Polymer Degradation and Stability, pp.39-48, 2001.

Y. Kamiya and E. Niki, Oxidative degradation », in Aspects of degradation and Stabilization of Polymers, pp.79-147, 1978.

L. Reich and S. Stivala, Oxidation of simple hydrocarbons in the absence of inhibitors and accelerators », in Autoxidation od hydrocarbons and polyolefins, Kinetics and lechanisms, pp.31-127, 1969.

L. Reich and S. S. Stivala, Elements of polymer degradation, 1971.

X. , C. B. Fayolle, L. Audouin, J. Verdu, and X. Duteurtre, Vieillissement thermo-oxydant des polymères. Un pas vers la modélisation cinétique, OFTA ? Observatoire Français des Techniques, pp.65-98, 2003.

M. Edge, R. Wiles, N. S. Allen, W. A. Mcdonald, and S. V. Mortlock, « Characterisation of the species responsible for yellowing in melt degraded aromatic polyesters ? I: Yellowing of poly(ethylene terephthalate) », in Polymer Degradation and Stability, pp.141-151, 1996.

M. Edge, R. Wiles, N. S. Allen, W. A. Mcdonald, and S. V. Mortlock, Identification of luminescent species contributing to the yellowing of poly(ethyleneterephthalate) on degradation, Polymer, vol.36, issue.2, pp.227-234, 1995.
DOI : 10.1016/0032-3861(95)91308-T

L. Incarnato, P. Scarfato, L. Di-maio, and D. , ACIERNO, « Structure and rheology of recycled PET modified by reactive extrusion », in Polymer, pp.6825-6831, 2000.

J. Scheirs, Polymer Recycling : Science, Technology and Application, John WILEY & SONS (WILEY series in Polymer Science), pp.120-182, 1998.

J. Verdu, Vieillissement physique des plastiques, Techniques de l'ingénieur, Traité Plastiques et Composites, p.3150, 1990.

S. W. Allison and I. M. Ward, The cold drawing of polyethylene terephthalate, British Journal of Applied Physics, vol.18, issue.8, pp.1151-1164, 1967.
DOI : 10.1088/0508-3443/18/8/316

J. M. Haudin, B. Escaig, and C. G. Sell, Plastic Deformation of Amorphous and Semicrystalline Materials, Les éditions de physique, pp.291-311, 1982.

J. M. Haudin and C. G. Sell, Structures et morphologies des polymères semicristallins », in Introduction à la mécanique des polymères, pp.97-115, 1995.

C. G. Sell, J. M. Hiver, and A. Dahoun, Experimental characterization of deformation damage in solid polymers under tension, and its interrelation with necking, International Journal of Solids and Structures, vol.39, issue.13-14, pp.3857-3872, 2002.
DOI : 10.1016/S0020-7683(02)00184-1

R. Franz and F. Welle, Recycled poly(ethylene terephthalate) for direct food contact applications : challenge test of an inline recycling process », in Food Additives and Contaminants, pp.502-511, 2002.

A. S. Michaels, W. R. Vietch, and J. A. Barrie, Solution of Gases in Polyethylene Terephthalate, Solution of gases in poly(ethylene terephthalate), pp.1-12, 1963.
DOI : 10.1063/1.1729066

A. S. Michaels, W. R. Vietch, and J. A. Barrie, Diffusion of Gases in Polyethylene Terephthalate, Diffusion of gases in poly(ethylene terephthalate), pp.13-20, 1963.
DOI : 10.1063/1.1729054

U. Göschel, Thermally stimulated structural changes in highly oriented glassy poly(ethylene terephthalate), Thermally stimulated changes in oriented PET, pp.4049-4059, 1996.
DOI : 10.1016/0032-3861(96)00249-2

D. Paszun and T. Spychaj, « Chemical recycling of poly(ethylene terephthalate) », in Industrial & Engineering Chemistry Research, pp.1373-1383, 1997.

A. J. Müller, J. L. Feijoo, M. E. Alvarez, and A. C. , The calorimetric and mechanical properties of virgin and recycled poly(ethylene terephthalate) from beverage bottles, Polymer Engineering & Science, vol.20, issue.11, pp.796-803, 1987.
DOI : 10.1002/pen.760271105

N. Torres, J. J. Robin, and B. Boutevin, Study of thermal and mechanical properties of virgin and recycled poly(ethylene terephthalate) before and after injection molding, European Polymer Journal, pp.2075-2080, 2000.
DOI : 10.1016/S0014-3057(99)00301-8

E. Misra, S. Basavarajaiah, K. R. Kumar, and P. Ravi, Effect of recycling on the properties of poly(ethylene terephthalate) films », in Polymer International, pp.1636-1640, 2000.

J. and C. Griffin, « Evaluation of PET and recycled PET as replacements for a PETG packaging tray, Journal of Plastic Film and Sheeting, pp.139-148, 1996.

M. Paci, F. P. La, and . Mantia, Influence of small amounts of polyvinylchloride on the recycling of polyethyleneterephthalate, Polymer Degradation and Stability, pp.11-14, 1999.
DOI : 10.1016/S0141-3910(98)00053-6

G. A. Serad and T. S. Thornburg, Separation of polyethylene terephthalate and polyvinyl chloride using supercritical carbon dioxide, brevet 5432973, pp.31-1995

T. Rieckmann, Recycling of PET food grade quality on a commercial scale, Chemicals Fibers International, pp.182-185, 1995.

H. Widen, A. Leufven, and T. Nielsen, Identification of chemicals, possibly originating from misuse of refillable PET bottles, responsible for consumer complaints about off-odours in water and soft drinks, Food Additives and Contaminants, pp.7-681, 2005.
DOI : 10.1007/s00217-002-0559-1

F. L. Bayer, « The threshold of regulation and its application to indirect food additive contaminants in recycled plastics », in Food Additives and Contaminants, pp.661-670, 1997.

P. V. Prasad, « Packaging material of new millenium », in The Economic Times Polymers, pp.8-17, 2000.

D. Fann, S. K. Huang, and J. Lee, DSC studies on the crystallization characteristics of poly(ethylene terephthalate) for blow molding applications, Polymer Engineering & Science, vol.34, issue.2, pp.265-273, 1998.
DOI : 10.1002/pen.10187

G. Giannotta, R. Po, N. Cardi, E. Tampellini, E. Occhiello et al., Processing effects on poly(ethylene terephthalate) from bottle scraps, Processing effects on poly(ethylene taraphthalate) from bottle scraps, pp.1219-1223, 1994.
DOI : 10.1002/pen.760341508

D. N. Bikiaris and G. P. Karayannadis, « Effect of Carboxylic end groups on Thermooxidative Stability of PET and PBT », in Polymer Degradation and Stability, pp.213-218, 1999.

S. Japon, L. Boogh, Y. Leterrier, and J. E. Manson, Reactive processing of poly(ethylene terephthalate) modified with multifunctional epoxy-based additives, Polymer, vol.41, issue.15, pp.5809-5818, 2000.
DOI : 10.1016/S0032-3861(99)00768-5

N. Cardi, R. Po, G. Giannotta, and E. Occhiello, Chain extension of recycled poly(ethylene terephthalate) with 2,2???-Bis(2-oxazoline), Journal of Applied Polymer Science, vol.50, issue.9, pp.1501-1509, 1993.
DOI : 10.1002/app.1993.070500903

N. Torres, J. J. Robin, and B. Boutevin, Chemical modification of virgin and recycled poly(ethylene terephthalate) by adding of chain extenders during processing, Journal of Applied Polymer Science, vol.38, issue.10, pp.1816-1824, 2001.
DOI : 10.1002/1097-4628(20010307)79:10<1816::AID-APP100>3.0.CO;2-R

G. P. Karayannidis, D. Kokkalas, and D. Bikiaris, « Solid-state polycondensation of poly(ethylene terephthalate) recycled from postconsumer soft-drink bottles I, Applied Polymer Science, pp.2135-2142, 1993.

S. Donnini, M. Mancini, and . Zanin, Recyclability of PET from virgin resin, Materials Research, pp.33-38, 1999.

P. Godard, J. M. Dekoninck, V. Devlesaver, and J. Devaux, Molten bisphenol-A polycarbonate-poly(ethylene terephthalate) blends. I. Identification of the reactions, Journal of Polymer Science Part A: Polymer Chemistry, vol.24, issue.12, pp.3301-3313, 1986.
DOI : 10.1002/pola.1986.080241214

B. Swoboda, Amélioration du comportement au feu de polyéthylène téréphtalate et d'alliages polyéthylène téréphtalate/polycarbonate recyclés, Thèse de l'Université Montpellier II, spécialité Chimie des Matériaux, 2007.

Z. Ke and B. , YONGPING, « Improve the gas barrier property of PET film with montmorillonite by in situ interlayer polymerization, Materials Letters, pp.3348-3351, 2005.

E. Estatiev, S. Fakirov, B. Krasteva, K. Friedrich, J. A. Covas et al., Recycling of poly(ethylene terephthalate) as polymer-polymer composites, Polymer Engineering & Science, vol.2, issue.4, pp.826-834, 2002.
DOI : 10.1002/pen.10994

D. M. Fann, S. K. Huang, and J. Y. Lee, Kinetics and thermal crystallinity of recycled PET. I. Dynamic cooling crystallization studies on blends recycled with engineering PET, Journal of Applied Polymer Science, vol.61, issue.8, pp.1375-1385, 1996.
DOI : 10.1002/(SICI)1097-4628(19960822)61:8<1375::AID-APP19>3.0.CO;2-Y

G. Sadler, « Recycled PET for food contact: current status of research, Proc. Society of Plastic Engineers Regional Technical Conference, 1995.

L. Delamare and B. , Computation of the morphological changes of a polymer blend along a twin-screw extruder, Polymer Engineering & Science, vol.36, issue.12, pp.1685-1683, 1996.
DOI : 10.1002/pen.10565

S. Rwei, Properties of poly(ethylene terephthalate)/poly(ethylene naphthalate) blends, Polymer Engineering & Science, vol.25, issue.12, pp.2475-2481, 1999.
DOI : 10.1002/pen.11634

N. S. Allen, M. Edge, J. Daniels, and D. Royall, « Spectroscopic analysis of organic contaminants in terephthalic acid: colour implications in poly(ethylene terephthalate) manufacture », in Polymer degradation and Stability, pp.373-383, 1998.

X. Colin and J. Verdu, Polymer degradation during processing, Comptes Rendus Chimie, vol.9, issue.11-12, pp.1380-1390, 2006.
DOI : 10.1016/j.crci.2006.06.004

URL : https://hal.archives-ouvertes.fr/hal-00114121

J. Crank and G. S. Park, Diffusion in Polymers, p.46, 1968.

P. Ienny, A. Caro-bretelle, and E. Pagnacco, Identification from measurements of mechanical fields by finite element model updating strategies. A review, European Journal of Computational Mechanics, 2008.
DOI : 10.3166/ejcm.18.353-376

C. G. Sell and J. M. Haudin, « Lois de comportement mécanique des polymères solides », dans Introduction à la mécanique des polymères, Institut national polytechnique de Lorraine, pp.141-168, 1995.

C. G. Sell and A. Dahoun, « Evolution of microstructure in semi-crystalline polymers under large plastic deformation, Material Science and Engineering, A175, pp.183-199, 1994.

F. Addiego, Caractérisation de la variation volumique du Polyéthylène au cours de la déformation plastique en traction et en fluage, Thèse de Doctorat, 2006.

J. Perez, Physique et mécanique des polymères amorphes, Techniques et Documentation, 1992.

P. Combette and I. Ernoult, Physique des polymères, II Propriétés, 2006.

P. I. Vincent, The necking and cold-drawing of rigid plastics, Polymer, vol.1, pp.7-19, 1960.
DOI : 10.1016/0032-3861(60)90003-3

I. H. Hall, The effect of strain rate on the stress???strain curve of oriented polymers. I. Presentation of experimental results, Journal of Applied Polymer Science, vol.12, issue.4, pp.731-738, 1967.
DOI : 10.1002/app.1968.070120411

J. M. Andrews and I. M. Ward, The cold-drawing of high density polyethylene, Journal of Materials Science, vol.3, issue.i, pp.411-417, 1970.
DOI : 10.1007/BF00550003

G. Meinel and A. Peterlin, « Platic deformation of polyethylene, II. Change of mechanical properties during drawing, Journal of Applied Polymer Science: Part A-2, pp.67-83, 1971.

C. G. Sell and J. J. Jonas, Determination of the plastic behaviour of solid polymers at constant true strain rate, Journal of Materials Science, vol.15, issue.6, pp.583-591, 1979.
DOI : 10.1007/BF00772717

J. L. Chaboche, Formalisme général des lois de comportement: applications aux métaux et polymères, Introduction à la mécanique des polymères, pp.119-140, 1995.

N. Brusselle-dupend, D. Lai, X. Feaugas, M. Guigon, and M. Clavel, Mechanical behavior of a semicrystalline polymer before necking. Part 1: Characterization of uniaxial behavior, Polymer Engineering & Science, vol.2, issue.1, pp.66-76, 2001.
DOI : 10.1002/pen.10709

C. G. Sell and J. , Introduction à la mécanique des polymères, pp.119-140, 1995.

M. Challier, J. Besson, L. Laiarinandrasana, and R. Piques, Damage and fracture of polyvinylidene fluoride (PVDF) at 20??C: Experiments and modelling, Engineering Fracture Mechanics, vol.73, issue.1, p.7990, 2006.
DOI : 10.1016/j.engfracmech.2005.06.007

URL : https://hal.archives-ouvertes.fr/hal-00154563

M. Berveiller and A. Zaoui, Introduction à la mécanique des polymères, Modélisation du comportement mécanique des solides microhétérogènes, pp.225-249, 1995.

A. Dahoun, M. Aboulfaraj, C. G. Sell, A. Molinari, and G. R. Canova, Plastic behavior and deformation textures of poly(etherether ketone) under uniaxial tension and simple shear, Plastic Behavior and Deformation Textures of Poly(Etherether Ketone) Under Uniaxial Tension and Simple Shear, pp.317-330, 1995.
DOI : 10.1002/pen.760350406

A. Paquin, Modélisation micromécanique du comportement élastoviscoplastique des matériaux hétérogènes, Thèse de Doctorat, 1998.

B. Lee, D. Parks, and S. Ahzi, Micromechanical modeling of large plastic deformation and texture evolution in semi-crystalline polymers, Journal of the Mechanics and Physics of Solids, pp.1651-1687, 1993.
DOI : 10.1016/0022-5096(93)90018-B

T. Parenteau, G. Ausias, Y. Grohens, and P. Pilvin, « Modélisation du comportement cyclique d'un polypropylène semi-cristallin par une approche micromécanique, Colloque DEPOS 21, pp.10-12, 2007.

M. Hori and S. Nemat-nasser, « Double-inclusion model and overall moduli of multi-phase composites, Mech. Mater, pp.189-206, 1993.

T. Kanit, S. Forest, I. Galliet, V. Mounoury, and D. , JEULIN, « Determination of the size of the representative volume element for random composites: statistical and numerical approach, International Journal of Solids and Structures, vol.40, pp.13-14, 2003.

C. Cunat and «. A. , thermodynamic theory of relaxation based on a distribution of nonlinear processes, J. Non-Cryst. Solids, vol.131133, pp.196-199, 1991.

C. Cunat, « The DNLR Approach and Relaxation Phenomena. Part I -Historical Account and DNLR Formalism, Mechanics of Time-Dependent Materials, pp.39-65, 2001.

L. Cangemi and Y. Meimon, « A two phase model for the mechanical behavior of semicrytalline polymer, Oil & Gas Sci. and thechnology-Rev. IFP, pp.555-580, 2001.

S. Berkowitz, Viscosity???molecular weight relationships for poly(ethylene terephthalate) in hexafluoroisopropanol???pentafluorophenol using SEC???LALLS, Journal of Applied Polymer Science, vol.29, issue.12, pp.4353-4361, 1984.
DOI : 10.1002/app.1984.070291264

A. Mehta, U. Gaur, and B. Wunderlich, Equilibrium melting parameters of poly(ethylene terephthalate), Journal of Polymer Science : Polymer Physics Edition, pp.289-296, 1978.
DOI : 10.1002/pol.1978.180160209

H. A. Pohl, Determination of Carboxyl End Groups in Polyester, Polyethylene Terephthalate, Analytical Chemistry, pp.1614-1616, 1954.
DOI : 10.1021/ac60094a024

M. Foulc, Etude du vieillissement hygrothermique de composites polyéthène téréphtalate renforcés par des fibres de verre courtes, Thèse de l'Université Montpellier II, spécialité Chimie des Matériaux, p.255, 2003.

F. Pilati, M. Toselli, M. Messori, C. Manzoni, A. Turturro et al., On specific factors affecting the crystallization of PET: the role of carboxyl terminal groups and residual catalysts on the crystallization rate, Polymer, vol.38, issue.17, pp.4469-4476, 1997.
DOI : 10.1016/S0032-3861(96)01046-4

J. Gardette and J. Lemaire, Advantages and limits of hydroperoxide titration methods in solid polymers, Polymer Photochemistry, pp.409-416, 1986.
DOI : 10.1016/0144-2880(86)90008-4

D. J. Carlsson, S. Jipa, and Z. Osawa, « Chemiluminescence study on the oxidation of several polyolefins ?I. Thermal-induced degradation of additive-free polyolefins, Polymer Degradation and Stability, pp.377-383, 1998.

R. Setnescu, R. Brousseau, and D. M. Wiles, « Reactions of sulfur dioxide with oxidized polyolefins, Polymer Degradation and Stability, pp.67-79, 1986.

M. Doi and S. F. Edwards, The Theory of Polymer Dynamics, 1986.

Y. P. Khanna, A barometer of crystallization rates of polymeric materials, Polymer Engineering and Science, vol.12, issue.24, pp.1615-1619, 1990.
DOI : 10.1002/pen.760302410

U. Zhang, H. Zheng, X. Lou, and D. Ma, Crystallization characteristics of polypropylene and low ethylene content polypropylene copolymer with and without nucleating agents, Journal of Applied Polymer Science, vol.51, issue.1, pp.51-56, 1994.
DOI : 10.1002/app.1994.070510106

W. Wang, A. Taniguchi, M. Fukuhara, and T. Okada, Surface nature of UV deterioration in properties of solid poly(ethylene terephthalate), Journal of Applied Polymer Science, vol.67, issue.4, pp.705-714, 1998.
DOI : 10.1002/(SICI)1097-4628(19980124)67:4<705::AID-APP13>3.0.CO;2-Q

Z. Zhang, S. Wu, M. Ren, and X. Xiao, « Model of cold crystallization of uniaxially oriented poly(ethylene terephthalate) », in Polymer, pp.4361-4365, 2004.

J. Y. Cavaille, J. Perez, and P. Johari, Molecular theory for the rheology of glasses and polymers, Physical Review B, vol.39, issue.4, p.2411, 1989.
DOI : 10.1103/PhysRevB.39.2411

O. Saito and J. , Effects of High Energy Radiation on Polymers II. End-linking and Gel Fraction, Journal of the Physical Society of Japan, vol.13, issue.12, p.1451, 1967.
DOI : 10.1143/JPSJ.13.1451

M. Mooney, A Theory of Large Elastic Deformation, Journal of Applied Physics, vol.11, issue.9, pp.582-592, 1940.
DOI : 10.1063/1.1712836