Y. Aviv, Gaining Benefits from Joint Forecasting and Replenishment Processes: The Case of Auto-correlated Demand, Manufacturing & Service Operations Management, Axsäter, S. Inventory Control, pp.55-74, 2000.

S. Axsäter, K. Rosling, S. Axsäter, and K. Rosling, Installation vs Echelon Stock Policies for Multilevel Inventory Control Multi-level production-inventory control: Material requirements planning or reorder point policies, Management Science, vol.396, issue.75, pp.1274-1280, 1993.

S. Axsäter and K. Rosling, Ranking of generalised multi-stage KANBAN policies, European Journal of Operational Research, vol.113, issue.3, pp.560-567, 1999.
DOI : 10.1016/S0377-2217(98)00122-2

M. Z. Babaï and Y. Dallery, Impact de l'information sur la demande sur le choix du mode de pilotage de flux dans la chaîne logistique, MOSIM'04 A study of forecast based flow management policies, and Dallery, Y. Inventory Management : A Forecast Based Approach vs. The Standard Approach, IESM'05, 2004.

M. Z. Babaï and Y. Dallery, A Study of Flow Management Policies with Advance Demand Information, 7 th ISIR Summer School on Supply Chain Inventory Management, 2005.

D. D. Bedworth and J. Bailey, Integrated Production Control Systems, 1987.

W. C. Benton and H. Shin, Manufacturing planning and control: The evolution of MRP and JIT integration, European Journal of Operational Research, vol.110, issue.3, pp.411-440, 1998.
DOI : 10.1016/S0377-2217(98)00080-0

B. J. Berkley, A REVIEW OF THE KANBAN PRODUCTION CONTROL RESEARCH LITERATURE, Production and Operations Management, vol.22, issue.3, pp.393-411, 1992.
DOI : 10.1111/j.1937-5956.1992.tb00004.x

W. L. Berry, Lot sizing procedures for requirements planning systems : A framework for analysis, Production and Inventory Management Journal, pp.19-34, 1972.

J. H. Bookbinder and J. Tan, Strategies for the Probabilistic Lot-Sizing Problem with Service-Level Constraints, Management Science, vol.34, issue.9, pp.1096-1108, 1988.
DOI : 10.1287/mnsc.34.9.1096

R. Bourbonnais and J. C. Usunier, Prévision des ventes : Théorie et pratique, 2001.

R. G. Brown, Statistical Forecasting for Inventory Control, 1959.

J. A. Buzacott, Queuing models of kanban and MRP controlled manufacturing Systems, Engineering Cost and Production Economics, p.17, 1989.

J. A. Buzacott and J. G. Shanthikumar, Stochastic Models of single stage MRP controlled production Systems, Working paper, 1989.

J. A. Buzacott and J. G. Shanthikumar, Stochastic Models of Manufacturing Systems, 1993.

J. Buzacott and J. G. Shanthikumar, Safety Stock versus Safety Time in MRP Controlled Production Systems, Management Science, vol.40, issue.12, pp.1678-1689, 1994.
DOI : 10.1287/mnsc.40.12.1678

L. Cadenas-barron, The economic production quantity (EPQ) with shortage derived algebraically, International Journal of Production Economics, vol.70, issue.3, pp.289-292, 2001.
DOI : 10.1016/S0925-5273(00)00068-2

F. Chen, Z. Drezner, J. K. Ryan, and D. Simchi-levi, Quantifying the Bullwhip Effect in a Simple Supply Chain: The Impact of Forecasting, Lead Times, and Information, Management Science, vol.46, issue.3, pp.436-443, 2000.
DOI : 10.1287/mnsc.46.3.436.12069

A. J. Clark and H. Scarf, Optimal Policies for a Multi-Echelon Inventory Problem, Management Science, vol.6, pp.474-490, 1960.

Y. Dallery, Notes de cours de logistique industrielle, 2000.

Y. Dallery and G. Liberopoulos, Extended kanban control system: combining kanban and base stock, IIE Transactions, vol.63, issue.4, pp.369-386, 2000.
DOI : 10.1287/opre.44.1.50

M. A. Debodt, L. F. Gelders, L. N. Wassenhove, and . Van, Lot-sizing under dynamic demand conditions : A review, Engineering Costs and Production Economics, pp.165-187, 1984.

D. P. Donk and . Van, Make to stock or make to order: The decoupling point in the food processing industries, International Journal of Production Economics, vol.69, issue.3, pp.297-306, 2001.
DOI : 10.1016/S0925-5273(00)00035-9

E. A. Elsayed and T. Boucher, Analysis and Control of Production Systems, 1985.

N. R. Ericsson, Predictable uncertainty in economic forecasting, In A Companion to Economic Forecasting, 2002.

A. Federgruen and Z. Katalan, The Impact of Adding a Make-to-Order Item to a Make-to-Stock Production System, Management Science, vol.45, issue.7, pp.980-994, 1999.
DOI : 10.1287/mnsc.45.7.980

Y. Frein, M. Mascolo, . Di, and Y. Dallery, On the design of generalized kanban control systems, International Journal of Operations & Production Management, vol.15, issue.9, pp.158-184, 1995.
DOI : 10.1108/01443579510099724

S. C. Graves, A Tactical Planning Model for a Job Shop, Operations Research, vol.34, issue.4, pp.522-533, 1986.
DOI : 10.1287/opre.34.4.522

S. C. Graves, A Single-Item Inventory Model for a Nonstationary Demand Process, Manufacturing & Service Operations Management, pp.50-61, 1999.

D. Gross and C. M. Harris, On One-For-One-Ordering Inventory Policies with State-Dependent Leadtimes, Operations Research, vol.19, issue.3, pp.735-760, 1971.
DOI : 10.1287/opre.19.3.735

R. Güllü, On the value of information in dynamic production/inventory problems under forecast evolution, Naval Research Logistics, vol.43, issue.2, pp.289-303, 1996.
DOI : 10.1002/(SICI)1520-6750(199603)43:2<289::AID-NAV8>3.0.CO;2-6

D. Gupta and S. Benjaafar, Make-to-order, make-to-stock, or delay product differentiation? A common framework for modeling and analysis, IIE Transactions, vol.31, issue.6, 2001.
DOI : 10.1287/mnsc.41.4.690

F. Harris, How many parts to make at once, Factory, The magazine of Management, pp.135-136, 1913.

D. C. Heath and P. L. Jackson, MODELING THE EVOLUTION OF DEMAND FORECASTS ITH APPLICATION TO SAFETY STOCK ANALYSIS IN PRODUCTION/DISTRIBUTION SYSTEMS, IIE Transactions, vol.41, issue.3, pp.17-30, 1994.
DOI : 10.1287/mnsc.12.3.206

M. Henig and Y. Gerchak, The Structure of Periodic Review Policies in the Presence of Random Yield, Operations Research, vol.38, issue.4, pp.634-643, 1990.
DOI : 10.1287/opre.38.4.634

W. J. Hopp and M. L. Spearman, To Pull or Not to Pull : What Is the Question, Manufacturing & Service Operations Management, pp.133-148, 2004.

D. L. Iglehart, ) Policies in the Infinite Horizon Dynamic Inventory Problem, Management Science, vol.9, issue.2, pp.259-267, 1963.
DOI : 10.1287/mnsc.9.2.259

J. Jeunet and N. Jonard, Measuring the performance of lot-sizing techniques in uncertain environments, International Journal of Production Economics, vol.64, issue.1-3, pp.197-208, 2000.
DOI : 10.1016/S0925-5273(99)00058-4

F. Karaesmen, J. Buzacott, and Y. Dallery, Integrating advance order information in make-to-stock production systems, IIE Transactions, vol.32, issue.8, pp.649-662, 2002.
DOI : 10.1287/mnsc.33.1.95

S. Karlin, Dynamic Inventory Policy with Varying Stochastic Demands, Management Science, vol.6, issue.3, pp.231-258, 1960.
DOI : 10.1287/mnsc.6.3.231

U. S. Karmarkar, Kanban systems, Workin Paper Series No. QM8612, Center for Manufacturing and Operations Management, The Graduate School of Management, 1986.

A. Kimms, Multi-Level Lot-Sizing and scheduling Methods for Capacitates Dynamic and Deterministic Models, Physica Verlag Series on Production and Logistics, 1997.

O. Kimura and H. Terada, Desi??n and analysis of Pull System, a method of multi-sta??e production control, International Journal of Production Research, vol.19, issue.3, pp.241-253, 1981.
DOI : 10.1080/00207548108956651

A. H. Lau and H. Lau, A comparison of different methods for estimating the average inventory level in a (Q,R) system with backorders, International Journal of Production Economics, vol.79, issue.3, pp.303-316, 2002.
DOI : 10.1016/S0925-5273(02)00257-8

H. L. Lee, P. Padmanabhan, and S. Whang, Information Distortion in a Supply Chain: The Bullwhip Effect, Management Science, vol.43, issue.4, pp.546-558, 1997.
DOI : 10.1287/mnsc.43.4.546

H. L. Lee, K. C. So, and C. S. Tang, The Value of Information Sharing in a Two-Level Supply Chain, Management Science, vol.46, issue.5, pp.626-643, 2000.
DOI : 10.1287/mnsc.46.5.626.12047

Y. J. Lee and P. Zipkin, Tandem Queues with Planned Inventories, Operations Research, vol.40, issue.5, pp.936-947, 1992.
DOI : 10.1287/opre.40.5.936

G. Liberopoulos and Y. Dallery, A Unified Framework for Pull Contol Mechanisms in Multi-Stage Manufacturing Systems, Annals of Operations Research, vol.93, issue.1/4, pp.325-355, 2000.
DOI : 10.1023/A:1018980024795

G. Liberopoulos and Y. Dallery, Comparative modelling of multi-stage production-inventory control policies with lot sizing, International Journal of Production Research, vol.41, issue.6, pp.1273-1298, 2003.
DOI : 10.1080/0020754021000042986
URL : https://hal.archives-ouvertes.fr/hal-00133253

J. P. Netter, Planifier les approvisionnements à capacité infinie, Document de formation, Diagma International, 2002.

J. P. Netter, Prévisions de la demande, Document de formation, Diagma International, 2002.

J. Orlicky, Material Requirements Planning : The New Way of Life in Production and Inventory Management, 1975.

E. L. Porteus, Numerical Comparisons of Inventory Policies for Periodic Review Systems, Operations Research, vol.33, issue.1, pp.134-152, 1985.
DOI : 10.1287/opre.33.1.134

C. N. Potts, L. N. Wassenhove, and . Van, Integrating Scheduling with Batching and Lot-Sizing: A Review of Algorithms and Complexity, Journal of the Operational Research Society, vol.43, issue.5, pp.395-406, 1992.
DOI : 10.1057/jors.1992.66

R. J. Ronald, G. K. Yang, and P. Chu, Technical note: The EOQ and EPQ models with shortages derived without derivatives, International Journal of Production Economics, vol.92, issue.2, pp.181-184, 2004.
DOI : 10.1016/j.ijpe.2003.10.013

K. Rosling, The Square-Root Algorithm for Single-Item Inventory Optimization, 1999.

K. Rosling, The (r,Q) inventory model with lost sales, Working paper, Växjö university, 2002.

S. N. Sanchez, E. Triantaphyllou, D. B. Webster, and T. W. Liao, A study of the total inventory cost as a function of the reorder interval of some lot-sizing techniques used in material requirements planning systems, Computers & Industrial Engineering, vol.40, issue.1-2, pp.101-116, 2001.
DOI : 10.1016/S0360-8352(00)00079-6

H. Scarf, The Optimality of (S,s) Policies in the Dynamic Inventory Problem, Mathematical Methods in the Social Sciences, vol.21, 1959.
DOI : 10.2307/1907924

E. A. Silver, Establishing the Reorder Quantity When the Amount Received is Uncertain, pp.32-39, 1976.

E. A. Silver, Inventory control under a probabilistic time-varying, demand pattern, A I I E Transactions, vol.14, issue.2, pp.371-379, 1978.
DOI : 10.1080/05695557808975228

E. A. Silver and H. A. Meal, A heuristic for selecting lot size requirements for the case of a deterministic time-varying demand rate with discrete opportunities for replenishment, Production and Inventory Management Journal, pp.64-74, 1973.

E. A. Silver and R. Peterson, Decision Systems for Inventory Management and Production Planning, 1985.

M. Solomon, Deterministic lotsizing models for production planning, 1991.
DOI : 10.1007/978-3-642-51649-8

M. L. Spearman and M. A. Zazanis, Push and Pull Production Systems: Issues and Comparisons, Operations Research, vol.40, issue.3, pp.521-532, 1992.
DOI : 10.1287/opre.40.3.521

G. P. Sphicas, EOQ and EPQ with linear and fixed backorder costs: Two cases identified and models analyzed without calculus, International Journal of Production Economics, vol.100, issue.1, 2004.
DOI : 10.1016/j.ijpe.2004.10.013

Y. Sugimori, F. Kusunoki, F. Cho, and S. Uchikawa, Toyota production system and Kanban system Materialization of just-in-time and respect-for-human system, International Journal of Production Research, vol.15, issue.6, pp.553-564, 1977.
DOI : 10.1080/00207547708943149

L. B. Toktay and M. Wein, Analysis of a Forecasting-Production-Inventory System with Stationary Demand, Management Science, vol.47, issue.9, pp.1268-1281, 2001.
DOI : 10.1287/mnsc.47.9.1268.9787

H. M. Wagner and T. M. Whitin, Dynamic Version of the Economic Lot Size Model, Management Science, vol.5, issue.1, pp.89-96, 1958.
DOI : 10.1287/mnsc.5.1.89

K. Wallis, Forecast Uncertainty, its Represebtation and Evaluation, EU & US Inflation and Macroeconomic Analysis, 2003.

U. Wemmerlov, The behavior of lot-sizing procedures in the presence of forecast errors, Journal of Operations Management, vol.8, issue.1, pp.37-47, 1989.
DOI : 10.1016/S0272-6963(89)80004-X

R. H. Wilson, Scientific Routine for Stock Control, Harvard Business Review, vol.13, pp.116-128, 1934.

C. A. Yano and H. L. Lee, Lot Sizing with Random Yields: A Review, Operations Research, vol.43, issue.2, pp.311-334, 1995.
DOI : 10.1287/opre.43.2.311