Y. Abdel-aziz and H. Karara, Direct Linear Transformation from Comparator Coordinates into Object Space Coordinates in Close-Range Photogrammetry, Photogrammetric Engineering & Remote Sensing, vol.81, issue.2, 1971.
DOI : 10.14358/PERS.81.2.103

C. Adam, F. Eckstein, S. Milz, and R. Putz, The distribution of cartilage thickness within the joints of the lower limb of elderly individuals, Journal of Anatomy, vol.193, issue.2, pp.203-214, 1998.
DOI : 10.1046/j.1469-7580.1998.19320203.x

D. Adams and S. Swanson, Direct measurement of local pressures in the cadaveric human hip joint during simulated level walking., Annals of the Rheumatic Diseases, vol.44, issue.10, pp.658-666, 1985.
DOI : 10.1136/ard.44.10.658

N. Afoke, P. Byers, and W. Hutton, Contact pressures in the human hip joint, Journal of Bone and Joint Surgery, vol.69, pp.536-541, 1987.

P. Allard, J. Blanchi, and R. Aïssaoui, Bases of three dimensional reconstruction " . 3D Analysis of Human Movement, 1995.

R. Alexander and A. Vernon, The dimensions of knee and ankle muscles and the forces they exert, Journal of human Movement Studies, vol.1, pp.115-123, 1975.

T. Alkjaer, E. Simonsen, P. Dyhre-poulsen, F. Trochu, and J. Dansereau, Comparison of inverse dynamics calculated by two-and three-dimensional models during walkingDynamic optimization of human walking Approach for the smoothing of three-dimensional f articular cartilage ry, Gait & Posture nderson FC, Pandy MG Journal of Biomechanical ndré B, vol.13, issue.61, pp.73-77, 1996.

F. Anderson and M. Pandy, Static and dynamic optimization solutions for gait are practically equivalent, Journal of Biomechanics, vol.34, issue.2, pp.153-161, 2001.
DOI : 10.1016/S0021-9290(00)00155-X

A. Anderson, C. Peters, B. Tuttle, and J. Weiss, Subject-Specific Finite Element Model of the Pelvis: Development, Validation and Sensitivity Studies, Journal of Biomechanical Engineering, vol.127, issue.3, pp.364-373, 2005.
DOI : 10.1115/1.1894148

S. Apkarian, S. Naumann, and B. Cairns, A three-dimensional kinematic and dynamic model of the lower limb, Journal of Biomechanics, vol.22, issue.2, pp.143-155, 1989.
DOI : 10.1016/0021-9290(89)90037-7

C. G. Armstrong, A. Bahrani, and D. Gardner, In vitro measurement o deformations in the intact human hip joint under load, Journal of Bone and Joint Surge, 1979.

A. Ascenzi, The Micromechanics Versus the Macromechanics of Cortical Bone???A Comprehensive Presentation, Journal of Biomechanical Engineering, vol.110, issue.4, pp.357-363, 1988.
DOI : 10.1115/1.3108454

A. Ascenzi and E. Bonucci, The tensile properties of single osteons, The Anatomical Record, vol.21, issue.4, pp.375-386, 1967.
DOI : 10.1002/ar.1091580403

A. Ascenzi and E. Bonucci, The compressive properties of single osteons, The Anatomical Record, vol.12, issue.3, pp.377-391, 1968.
DOI : 10.1002/ar.1091610309

A. Ascenzi and E. Bonucci, The shearing properties of single os, pp.499-510, 1972.

A. Ascenzi, E. Bonucci, and A. Simkin, An approach to the mechanical properties of single osteonic lamellae, Journal of Biomechanics, vol.6, issue.3, pp.227-235, 1973.
DOI : 10.1016/0021-9290(73)90044-4

P. Ieri and A. Benvenuti, The bending properties of single osteons A continuous wave technique for the tomical variation of orthotropic elastic moduli of the analysis of the hip joint " . Medical & parison of the 985) Functional foot orthoses for athletic injuries. A retrospective study, The Anatomical Record, pp.359-362, 1984.

A. Ascenzi, A. Benvenuti, and E. Bonucci, The tensile properties of single osteonic lamellae: Technical problems and preliminary results, Journal of Biomechanics, vol.15, issue.1, pp.29-37, 1982.
DOI : 10.1016/0021-9290(82)90032-X

A. Ascenzi, P. Baschieri, and A. Benvenuti, The torsional properties of single selected osteons, Journal of Biomechanics, vol.27, issue.7, pp.875-884, 1994.
DOI : 10.1016/0021-9290(94)90260-7

R. Ashman and J. Rho, Elastic modulus of trabecular bone material, Journal of Biomechanics, vol.21, issue.3, pp.177-181, 1988.
DOI : 10.1016/0021-9290(88)90167-4

R. Ashman, S. Cowin, V. Buskirk, W. Rice, and J. , A continuous wave technique for the measurement of the elastic properties of cortical bone, Journal of Biomechanics, vol.17, issue.5, pp.349-361
DOI : 10.1016/0021-9290(84)90029-0

R. Ashman, J. Rho, and C. Turner, Anatomical variation of orthotropic elastic moduli of the proximal human tibia, Journal of Biomechanics, vol.22, issue.8-9, pp.895-900, 1989.
DOI : 10.1016/0021-9290(89)90073-0

H. Bayraktar, E. Morgan, G. Niebur, G. Morris, E. Wong et al., Comparison of the elastic and yield properties of human femoral trabecular and cortical bone tissue, Journal of Biomechanics, vol.37, issue.1, pp.27-35, 2004.
DOI : 10.1016/S0021-9290(03)00257-4

P. Beillas, G. Papaioannou, S. Tashman, and K. Yang, A new method to investigate in vivo knee behavior using a finite element model of the lower limb, Journal of Biomechanics, vol.37, issue.7, pp.1019-1030, 2004.
DOI : 10.1016/j.jbiomech.2003.11.022

A. Bell, D. Pedersen, and R. Brand, A comparison of the accuracy of several hip center location prediction methods, Journal of Biomechanics, vol.23, issue.6, pp.617-621, 1990.
DOI : 10.1016/0021-9290(90)90054-7

S. Bensamoun, H. B. Tho, M. Luu, S. Gherbezza, J. De-belleval et al., Spatial distribution of acoustic and elastic properties of human femoral cortical bone, Journal of Biomechanics, vol.37, issue.4, pp.503-510, 2004.
DOI : 10.1016/j.jbiomech.2003.09.013
URL : https://hal.archives-ouvertes.fr/hal-00023425

G. Bergmann, G. Deuretzbacher, M. Heller, F. Graichen, A. Rohlmann et al., Hip contact forces and gait patterns from routine activities, Journal of Biomechanics, vol.34, issue.7, pp.859-871, 2001.
DOI : 10.1016/S0021-9290(01)00040-9

B. Besnault, Modélisation par éléments finis du bassin en configuration de choc automobile, Thèse ENSAM, 1999.

A. Bonnefoy, D. Pradon, L. Chèze, A. Bonnefoy, N. Doriot et al., Les systèmes d'analyse du mouvement : techniques et principes, protocoles, sources d'erreurs et solutions Modèle cinématique et dynamique tridimensionnel du membre inférieur : Estimation des forces musculaires et des réactions articulaires au cours de la phase d'appui de A non-invasive protocol to echanics, Innovation et Technologie en Biologie et Médecine, pp.24-32, 2005.

T. Brown, I. Digioia, and . Am, A contact-coupled finite element analysis of the natural adult hip, Journal of Biomechanics, vol.17, issue.6, 1984.
DOI : 10.1016/0021-9290(84)90035-6

P. Büchler, N. Ramaniraka, L. Rakotomanana, J. Iannotti, A. Farron et al., A finite element ùodel of the An improved method for finite element mesh n bogie moteur, Thèse INSA, pp.171-178, 1997.

N. Borghese, L. Bianchi, and F. Lacquaniti, Kinematic determinants of human locomotion., The Journal of Physiology, vol.494, issue.3, pp.863-879, 1996.
DOI : 10.1113/jphysiol.1996.sp021539

S. Bouisset, Etienne-Jules Marey : quand l'étude du mouvement devient une science expérimentale, 2005.

S. Boyd, R. Müller, R. Brand, R. Crownishield, C. Wittstock et al., Smooth surface meshing for automated finite element model generation from 3D image data A model of lower extremity muscular anatomy The sensitivity of muscle prediction to charges in physiologic cross-sec, Journal of Biom Journal of Biomec Brand RA, 1982.

R. Brand, D. Pedersen, D. Davy, G. Kotzar, K. Heiple et al., Comparison of hip force calculations and measurements in the same patient, The Journal of Arthroplasty, vol.9, issue.1, pp.45-51, 1994.
DOI : 10.1016/0883-5403(94)90136-8

D. Briand and F. Bonnel, Adaptations morphologiques à la marche bipède dans l'échelle animale, 1994.

P. Brinkmann, W. Frobin, and E. Hierholzer, Stress on the articular surface of the hip joint in healthy adults and person with idiopathic, 1981.

K. Bruyère, Caractérisation et modélisation mécanique de l'os spongieux et trabéculaire en relation avec ses propriétés structu, 2000.

T. Brown and D. Shaw, In vitro contact stress distributions in the natural human hip, Journal of Biomechanics, vol.16, issue.6, pp.373-384, 1983.
DOI : 10.1016/0021-9290(83)90071-4

J. Campedelli, Modélisation globale statique des systèmes mécaniques hyperstatiques précharges, 2002.

A. Cappozzo, F. Catani, D. Croce, U. Leardini, A. Chiari et al., Position and orientation in space of bones during movement: anatomical frame definition and determination Human movement analysis using stereophotogrammetry: theoretical background, Clinical BiomechanicsGait & Posture, vol.21, pp.186-96, 1995.

J. Carrier, C. Aubin, F. Trochu, and H. Labelle, Optimization of Rib Surgery Parameters for the, 2005.

D. Carter and M. Wong, Modelling cartilage mechanobiology Philosophical Transactions of the 0) The Mechanics of distance running: a historical perspective Complete calibration of a stereo photogrammetric system through control points of unknown coordinates, muscle force estimations using optimization techniques " . Proceedings of the Institution of Mechanical Engineers [H], pp.1-31, 2003.

J. Challis, R. Chandler, C. Clauser, J. Mcconville, H. Reynolds et al., Producing physiologically realistic individual muscle force estimations by imposing Investigation of inertial, 1975.

L. Chiari, D. Croce, U. Leardini, A. Cappozzo, and A. , Human movement analysis using, 2005.
DOI : 10.1016/j.gaitpost.2004.04.004

K. Choi, J. Kuhn, M. Ciarelli, and S. Goldstein, The elastic moduli of human subchondral, pp.1371-1381, 1990.

J. Challis and D. Kerwin, An analytical examination of 148. constraints when using optimization techniques 253-261. properties of the human body, Medical Engineering & Physics, vol.19, p.pp, 1993.

E. Chao, Graphic-based musculoskeletal model for biomechanical analyses and animation, Medical Engineering & Physics, vol.25, issue.3, pp.201-212, 2003.
DOI : 10.1016/S1350-4533(02)00181-9

L. Chèze, B. Fregly, and J. Dimnet, A solidification procedure to facilitate kinematic analyses based on video system data, Journal of Biomechanics, vol.28, issue.7, pp.879-84, 1995.
DOI : 10.1016/0021-9290(95)95278-D

L. Chèze, Comparison of different calculations of three-dimensional joint kinematics from video-based system data stereophotogrammetry: instrumental errors, Journal of Biomechanics Gait & Posture, vol.33, issue.21, pp.1695-1699, 2000.

K. Choi and S. Goldstein, A comparison of the fatigue behavior of human trabecular and cortical bone tissue, Journal of Biomechanics, vol.25, issue.12, 1992.
DOI : 10.1016/0021-9290(92)90051-2

A. Cifuentes and A. Kalbag, A performance study of tetrahedral and hexahedral elements in 3-D finite element structural analysis, Finite Elements in Analysis and Design, vol.12, issue.3-4, pp.313-318, 1992.
DOI : 10.1016/0168-874X(92)90040-J

J. Coles, J. Cha, M. Warman, G. Jay, F. Guilak et al., Frictionnal, mechanical and morphological differences between PRG4, 2007.

B. Couteau, Y. Payan, S. Lavallee, F. Lo, and E. Calton, The mesh-matching algorithm: an automatic 3D mesh generator for finite element structures, Journal of Biomechanics, vol.33, issue.8, pp.1005-1009, 2000.
DOI : 10.1016/S0021-9290(00)00055-5
URL : https://hal.archives-ouvertes.fr/hal-00082218

J. Andrews and R. Brand, A biomechanical investigation of the human hip, Clinucal Orthopaedics and Related Research, pp.185-192, 1978.

M. Dalstra and R. Huiskes, Load transfer across the pelvis bone, Journal of Biomechanics, 1995.

J. Dapena, E. Harman, J. Miller, J. Davids, F. Rowan et al., Three-dimensional cinematography with control object of Indications for orthoses to improve gait in children with ic optimization technique for predicting muscle forces in the swing phase of gait, Journal of Biomechanics, vol.20, pp.187-201, 1982.

J. Craveur, Modélisation des structures: calcul par éléments finis, 1996.

J. Crolet, B. Aoubiza, A. Meunier, R. Crowninshield, R. Crowninshield et al., Compact bone: numerical simula The prediction of forces in joint structures, 1981.

R. Crowninshield and R. Brand, A physiologically based criterion of muscle force prediction in locom D Scoliosis and leg asymmetries: a reliable approach to assess wedge solutions efficacy, Amico M Studies in Health Technology and Informatics, vol.88, pp.285-289, 1981.

D. 'angeli-chevassut, M. Gaviria, and M. , La marche humaine : description et repères sémantiques, 1994.

D. Leva and P. , Adjustments to Zatsiorsky-Seluyanov's segment inertia parameters, 1996.

D. Leva and P. , Joint center longitudinal positions computed from a selected subset of Chandler's data, Journal of Biomechanics, vol.29, p.pp, 1996.

D. Croce, U. Leardini, A. Chiari, L. Cappozzo, and A. , Human movement analysis using stereophotogrammetry: assessment of anatomical landmark misplacement and effects on joint kinematics, 2005.

S. Delp, J. Loan, M. Hoy, F. Zajac, E. Topp et al., An interactive graphics-based model of the lower extremity to study orthopaedic surgical procedures, IEEE Transactions on Biomedical Engineering, vol.37, issue.8, pp.757-767, 1990.
DOI : 10.1109/10.102791

S. Delp and W. Maloney, Effects of hip center location on the moment-generating capacity of the muscles, Journal of Biomechanics, vol.26, issue.4-5, pp.485-499, 1993.
DOI : 10.1016/0021-9290(93)90011-3

G. Demeny, Bases scientifiques de l'éducation physique, 1903.

G. Demeny, Mécanisme et éducation des mouvements " . Paris Réimpression de l'édition Félix Alcan de 1905, Revue EPS, p.éditions, 1905.

W. Dempster, Space requirements for the seated operator " . WADC technical report TR-55? 159 of the lower limb during the stance phase of gait using an homogeneous matrix approach, Thèse Université Claude Bernard, 1955.

W. Dostal and J. Andrews, A three-dimensional biomechanical model of hip musculature, Journal of Biomechanics, vol.14, issue.11, 1981.
DOI : 10.1016/0021-9290(81)90036-1

L. Duchemin, Prédiction du risque fracturaire de l'extrémité supérieure du fémur à partir d'une, 2006.

. Lle, body segment inertial parameters, Journal of Biomechanics, vol.40, pp.543-553

H. Elftman, The force exerted by the ground in walking, Arbeitsphysiologie, vol.9, issue.5, p.pp, 1939.
DOI : 10.1007/BF02012165

J. Eng and M. Pierrynowski, The effect of soft foot orthotics on three-dimensional lower-limb mputer vision: a geometric viewpoint, pp.477-83, 1994.

G. Dhatt and G. Touzot, Une présentation de la méthode des éléments finis, Editions Maloine, 1984.

R. Donatelli, C. Hurlbert, D. Conaway, . St, and R. Pierre, Biomechanical Foot Orthotics: A Retrospective Study, Journal of Orthopaedic & Sports Physical Therapy, vol.10, issue.6, pp.205-212, 1988.
DOI : 10.2519/jospt.1988.10.6.205

N. Doriot, Modélisation dynamique du membre inférieur pour l'estimation des forces articulaires et musculaires mises en jeu pendant la phase d'appui de la, 2001.

N. Doriot and L. Chèze, A three-dimensional kinematic and dynamic study Engineering, pp.21-27, 2004.

G. Duda, M. Heller, J. Albinger, O. Schulz, E. Schneider et al., Influence of muscle forces on femoral strain distribution, Journal of Biomechanics, vol.31, issue.9, 1998.
DOI : 10.1016/S0021-9290(98)00080-3

R. Dumas, R. Aissaoui, J. De-guise, L. Chèze, J. Verriest et al., A 3D Generic Inverse Dynamic Method using Wrench Notation and Quaternion Algebra, Computer Methods in Biomechanics and Biomedical Engineering, vol.16, issue.3, pp.192-204, 2004.
DOI : 10.1007/BF02441745

R. Ferber, I. Davis, D. Williams, and . Iii, Effect of foot orthotics on rearfoot and tibia joint coupling patterns and variability, Journal of Biomechanics, vol.38, issue.3, 2005.
DOI : 10.1016/j.jbiomech.2004.04.019

S. Ferguson, J. Bryant, R. Ganz, and K. Ito, The influence of the acetabular labrum on hip joint cartilage consolidation: a poroelastic finite element model, Journal of Biomechanics, vol.33, issue.8, pp.953-960, 2000.
DOI : 10.1016/S0021-9290(00)00042-7

C. Ford, T. Keaveny, W. Hayes, O. Franke, K. Durst et al., The effect of impact direction on the structural capacity of, Clinical Biomechanics, vol.24, pp.111-116, 1996.

U. Glitsch and W. Baumann, The three-dimensional determination of internal loads in the lower extremity, Journal of Biomechanics, vol.30, issue.11-12, 1997.
DOI : 10.1016/S0021-9290(97)00089-4

V. Goel, S. Valliapan, and N. Sevenson, Stresses in the normal pelvis, Computers in Biology and Medicine, vol.8, issue.2, 1978.
DOI : 10.1016/0010-4825(78)90001-X

G. Gorton and H. , Assessment of the kinematic variability between twelves shiners, 2001.

C. Guttierrez, Etude des fonctionnalités du membre supérieur en mouvement par l'exploitation, 1996.

K. Halvorsen, M. Lesser, and A. Lundberg, A new method for estimating the axis of rotation and the Inverse dynamic optimization including muscular dynamics, a new simulation method applied to goal directed movements Rehabilitative orthotics evaluation in children with diplegic cerebral palsy: kinematics and kinetics " . Annual International ce in the ankle flexors of man, Journal of Biomechanics Journal of Physioloy, vol.27, issue.103, pp.953-960, 1999.

L. Mockros, Viscoelastic properties of human articular cartilage, Journal of Applied Physiology, vol.31, pp.562-568, 1971.

S. Heintz and E. Gutierrez-farewik, Static optimization of muscle forces during gait in comparison the proximal femur during falls, Journal of Bone and Mineral Research, vol.11, pp.377-383, 2007.

E. Genda, S. Yamamoto, and E. Tanaka, Non-linear finite element analysis of the hip joint contact stress, Journal of Japanese Society, 2003.

S. Ghadiali, J. Banks, and J. Swarts, Finite element analysis of active Eustachian tube function, Journal of Applied Physiology, vol.97, issue.2, pp.648-654, 2004.
DOI : 10.1152/japplphysiol.01250.2003

J. Giffin, W. Stanish, S. Mackinnon, and D. Macleod, Application of a Lateral Heel Wedge as a Nonsurgical Treatment for Varum Gonarthrosis, JPO Journal of Prosthetics and Orthotics, vol.7, issue.1, pp.23-28, 1995.
DOI : 10.1097/00008526-199500710-00004

P. Gignoux, L. Cheze, J. Carret, and J. Dimnet, Modeling the moving skeleton of walking subjects, Computerized Medical Imaging and Graphics, vol.17, issue.4-5, pp.329-332, 1993.
DOI : 10.1016/0895-6111(93)90024-H

H. Haxton, Absolute muscle for Hayes WC, 1944.

M. Ho-ba-tho, J. Rho, and R. Ashman, Atlas of mechanical properties of human cortical and cancellous bone, in In vivo assessment of bone quality by vibration and wave propagation techniques -Part II, States of America Journal of Bone and joint surgery, vol.83, issue.71, pp.7-38, 1992.

D. Davy, Mathematical modelling of stress in the hip during gait A comparative study of automatic finite element mesh generation techniques in orthopaedic biomechanics An investigation of muscle lines of action about the hip: a centroid line approach vs the straight line approach bone strength in the human os calcanei 49-55. l for the mechanical analysis of skeletal muscles, Applied Physiology Journal of Biomechanics Bioengineering Conference of ASME Journal of Biomechanics Journal of Biomechanics Journal of Theoretical Biology. Journal of Orthopaedic Science, vol.26, issue.9, pp.26-32, 1975.

R. Tehranzadeh, J. Keyak, and J. , Relationships between material properties and CT scan data of cortical bone with and without metastatic lesions, Medical Engineering &, 2003.

I. Kapandji, Physiologie articulaire -Membre inférieur " . Editions Maloine Paris, 5 ème édition, pp.189-99, 1999.

W. Hodge, R. Fijan, R. Carlson, R. Burgess, W. Harris et al., Contact pressures in the human hip joint measured in vivo., Proceedings of the National Academy of Sciences of the United, 1986.
DOI : 10.1073/pnas.83.9.2879

W. Hodge, K. Carlson, R. Fijan, R. Burgess, P. Riley et al., Contact pressures from an instrum, 1989.
DOI : 10.2106/00004623-198971090-00015

A. Hof, H. Helzinga, W. Grimmius, and J. Halbertsma, Detection of non-standard EMG profiles in walking, Gait & Posture, vol.21, issue.2, pp.171-177, 2005.
DOI : 10.1016/j.gaitpost.2004.01.015

R. Huiskes and E. Chao, A survey of finite element analysis on orthopaedic biomechanics : the first decade, Journal of Biomechanics, vol.16, p.3, 1983.

C. Hulet, D. Hurwitz, T. Andriacchi, J. Galante, and C. Vielpeau, Mécanismes d'adaptation fonctionnelle de la marche à une douleur invalidante de la coxo-fémorale, Revue de Chirurgie Orthopédique, 2000.

M. Ikai and T. Fukunaga, Calculation of muscle strength per unit cross-sectional area of human muscle by means of ultrasonic measurement, Internationale Zeitschrift f???r Angewandte Physiologie Einschlie???lich Arbeitsphysiologie, vol.19, issue.1, 1968.
DOI : 10.1007/BF00696087

N. Jensen, L. Madsen, and F. Linde, Topographical distribution of trabecular, 1991.

T. Johansson, P. Meier, and R. Blickhan, A finite-element mode, 2000.

E. Jolivet, V. Poméro, and W. Skalli, Finite element model of muscle, International Symp, 2001.

N. Kaku, H. Tsumura, H. Taira, T. Sawatari, and T. Torisu, Biomechanical study of load transfer of the pubic ramus due to pelvic inclination after hip joint surgery using a three-dimensional finit Kaneko TS, Pejcic M Physics, vol.25, pp.445-454, 2004.

D. Karlsson and B. Peterson, Towards a model for force predictions in the human shoulder Determination of mechanical properties of human femoral cortical bone by the hopkinson bar stress technique, Journal of Biomechanics Journal of Bomechanics, vol.25, 1990.

J. Katz, Hard tissue as a composite material???I. Bounds on the elastic behavior, Journal of Biomechanics, vol.4, issue.5, pp.455-473, 1971.
DOI : 10.1016/0021-9290(71)90064-9

J. Katz, Anisotropy of Young's modulus of bone, eering, pp.106-107, 1980.
DOI : 10.1038/283106a0

T. Kepple, A. Arnold, S. Stanhope, K. Siegel, R. Kirkwood et al., Assessment of a method to estimate muscle Radiographic and non-invasive determination of theIn vivo determination of patello-femoral separation and rootenboer An inverse dynamics model for the analysis, reconstruction and prediction of bipedal walking, he. Approche en corps rigide et simulation en mécanique plans flexibles par éléments finis " . Mécanique, Insititut National, pp.1369-1376, 1994.

H. Kurrat and W. Oberländer, The thickness of the cartilage in the hip joint A quantitative comparison of a position measurement system and accelerometry, Journal of Anatomy, er W Journal of Biomechanics, vol.22, pp.295-308, 1978.

A. Leardini, M. Benedetti, F. Catani, L. Simoncini, S. Giannini et al., An anatomically based protocol The structure and anisotropic mechanical properties of bone, IEEE Transactions on Biomedical Engin, 1984.

J. Katz and A. Meunier, The elastic anisotropy of bone, Journal of Biomechanics, vol.20, issue.11-12, pp.1063-1070, 1987.
DOI : 10.1016/0021-9290(87)90024-8

E. Keating, P. Faris, M. Ritter, and K. J. , Use of lateral heel and sole wedges in the treatment of medial osteoarthritis of the knee, 1993.

G. Kempson, The Mechanical Properties of Articular Cartilage, Freeman MAR, Adult articular cartilage, pp.313-414, 1979.
DOI : 10.1016/B978-0-12-655102-0.50011-4

T. Kepple, H. Sommer, L. Siegel, K. Stanhope, and S. , A three-dimensional musculoskeletal database for the lower extremities, Journal of Biomechanics, vol.31, issue.1, pp.77-80, 1998.
DOI : 10.1016/S0021-9290(97)00107-3

B. Krabbe, R. Farkas, and W. Baumann, Influence of inertia on intersegment mome, 1997.

Z. Ladin and W. Flowers, Messn kinematics during walking, Journal of Orthopaedic Research, vol.12, pp.412-420

A. Leardini, L. Chiari, D. Croce, U. Cappozzo, and A. , Human movement analysis using stereophotogrammetry, Gait & Posture, vol.21, issue.2, pp.212-225, 2005.
DOI : 10.1016/j.gaitpost.2004.05.002

G. Legnani, F. Casolo, P. Righettini, and B. Zappa, A homogeneous matrix approach to 3D nd dynamics. Mechanisms and machine theory Part 2: applications to chains of rigid bodies and serial manipulators Revue du Rhumatisme et des Maladies Ostéo-articulaires, Mechanisms and Machine Theory es in the ACL Thèse ENSAM, Paris. in marker co-ordinates using global optimisation with joint constraints, pp.589-605, 1996.

J. Mcconville, T. Churchill, I. Kaleps, C. Clauser, and J. Cuzzi, Anthropometric relationships of ht?Patterson Air Force Base Orthopaedics and Sports Physical Therapy-10. and subchondral bone spatial thickness distribution from MRI, Mechanisms and machine theory. Part 1: theory " . Mechanisms and Machine Theory, pp.573-587, 1980.

G. Legnani, F. Casolo, P. Righettini, and B. Zappa, A homogeneous matrix approach to 3D kinematics a, 1996.

M. Lengsfeld, J. Schmitt, P. Alter, J. Kaminsky, R. Leppek et al., Comparison of gemotry-based and CT voxel-based finite element modelling and experimental validation An anthropometric scaling method with application to the knee joint A nonhomogeneous anthropometric scaling method based on finite element principles, Medical Engineering & Phy Lew WD, Lewis JL Journal of Biomechan Lewis JL Journal of Biomechanics, vol.13, pp.815-824, 1977.

G. Li, T. Rudy, M. Sakane, A. Kanamori, C. Ma et al., The importance of quadriceps and hamstring muscle loading on knee kinematics and in-situ forc, 1999.

J. Loizeau, Optimisation de l'analyse du comportement mécanique du fémur humain, 1994.

T. Lu, O. Connor, and J. , Bone position estimation from sk, 1999.

K. Manal, I. Mcclay, J. Richards, and B. Galinat, Knee moment profiles during walking: errors due to soft tissue movement of the shank and the influence of the reference coordinate system, Gait & Posture, vol.15, issue.1, pp.10-17
DOI : 10.1016/S0966-6362(01)00174-6

E. Marey, Le mouvement Editions Paris Masson. body and body segment moments of inertia The effect of foot orthotics and gait velocity on lower limb kinematics and temporal events of stance, The Journal, 1894.

I. Mechlenburg, J. Nyengaard, J. Gelineck, and K. Soballe, Cartilage thickness in the hip joint measured by MRI and stereology ??? a methodological study, Osteoarthritis and Cartilage, vol.15, issue.4, pp.366-371, 2007.
DOI : 10.1016/j.joca.2006.10.005

D. Mena, J. Mansour, and S. Simon, Analysis and synthesis of human swing leg motion during gait and its clinical applications, Journal of Biomechanics, vol.14, issue.12, pp.823-832, 1981.
DOI : 10.1016/0021-9290(81)90010-5

A. Miles, D. Dall, and B. Macleland, Modelling the femoral load transfer in total hip joint le animal et application à l'étude du vieillissement osseux humain, Thèse INSA, pp.582-592, 1983.

C. Morris, W. Res, C. Armstrong, A. Mündermann, J. Wakeling et al., Biphasic creep and stress relaxation of articular cartilage in compression: Theory and experiments Mechanical analysis of human pelvis and its application to the articular hip joint by means of three-dimensional finite element method Fracture simulation of the femoral bone using the finite-element Computer modeling and simulation of human movement, Hip muscle co-contraction: evidence from concurrent in vivo, pp.211-222, 1948.

D. Penrod, D. Davy, and D. Singh, An optimization approach to tendon force analysis A physiological model for the solution of individual muscle forces during normal human walking Columbia. replacement -a preliminary study, Thèse Simon Fraser University, pp.61-64, 1974.

D. Mitton, Caractérisation mécanique et structurale de l'os spongieux, 1997.

M. Mooney, A Theory of Large Elastic Deformation, Journal of Applied Physics, vol.11, issue.9, pp.295-303, 1940.
DOI : 10.1063/1.1712836

M. Pandy and F. Anderson, Dynamic optimization of human gait, Journal of Biomechanics, vol.31, p.115, 1998.
DOI : 10.1016/S0021-9290(98)80232-7

A. Patriarco, R. Mann, S. Simon, and J. Mansour, An evaluation of the approaches of optimization models in the prediction of muscle forces during human gait, Journal of Biomechanics, vol.14, issue.8, pp.513-525, 1981.
DOI : 10.1016/0021-9290(81)90001-4

D. Pedersen, R. Brand, and D. Davy, Pelvic muscle and acetabular contact forces during gait, Journal of Biomechanics, vol.30, issue.9, pp.959-965, 1997.
DOI : 10.1016/S0021-9290(97)00041-9

M. Pierrynowski and J. Morrison, A physiological model for the evaluation of muscular forces in human locomotion: theoretical aspects, Mathematical Biosciences, vol.75, issue.1, pp.69-101, 1985.
DOI : 10.1016/0025-5564(85)90067-7

M. Pierrynowski and J. Morrison, Estimating the muscle forces generated in the human lower, 1985.

P. Poncet, F. Trochu, and J. Dansereau, Curvilinear Three-Dimensional Modeling of Spinal Curves Prilutsky BI Analysis of muscle coordination strategies in cycling, Gregory RJ, 1999.

N. Ramaniraka, A. Terrier, N. Theumann, and O. Sieqrist, Effects of the posterior cruciate ligament 434-442. ol, pp.409-415, 2005.

N. Ravi, N. Simha, J. Lewis, M. Manary, and L. Schneider, Nonlinear elastic parameters of articular cartilage, 1999.

D. Reilly, A. Burstein, and V. Frankel, The elastic modulus for bone Spatial geometry of the human pelvis, Journal of Biomechanics, HM, Snow CC, Young JW, 1974.

B. Tho, M. Ashman, and R. , Relations of mechanical properties to density and CT numbers in human bone easuring the elastic properties of human tibial cortical and cancellous bone, Medical Engineering & PhysicsUltrasonics Human Movement Science Journal of Biomechanics, vol.17, issue.17, pp.347-355, 1995.

. Acetabulum-ii, Instrumented endoprosthesis measurement of articular surface pressure distribution ssure elevation in dysplastic hips: a chronic overload model, Journal of Biomechanics Journal of Orthopaedic Surgery and Research, vol.14, issue.3, pp.315-323

J. Rasmussen, M. Damsgaard, and M. Voigt, Muscle recruitment by the min/max criterion ??? a comparative numerical study, Journal of Biomechanics, vol.34, issue.3, 2001.
DOI : 10.1016/S0021-9290(00)00191-3

A. Ramos and J. Simões, Tetrahedral versus hexahedral finite elements in numerical modelling of the proximal femur, Medical Engineering & Physics, vol.28, issue.9, pp.916-924, 2006.
DOI : 10.1016/j.medengphy.2005.12.006

H. Rehbinder and C. Martin, A control theoretic model of the forearm, Journal of Biomechanics, vol.34, issue.6, pp.741-748, 2001.
DOI : 10.1016/S0021-9290(01)00013-6

J. Richards, The measurement of human motion: A comparison of com, 1999.

H. Röhrle, R. Scholten, C. Sigolotto, W. Sollbach, and H. Kellner, Joint forces in the human pelvis-leg skeleton during walkin, 1984.

J. Roux, M. Kerboul, and M. Postel, Les coxarthroses à évolution rapide, 1970.

P. Rushfeldt, R. Mann, W. Harris, M. Russell, K. Shivanna et al., Improved techniques for measuring in vitro the geometry and pressure distribution in the human, Cartilage contact pre, 1981.

L. Satton, W. Zhu, and V. Mow, The biphasic poroviscoelastic behavior of articular cartilage: Role of the surface zone in governing the compressive behaviour bony landmarks -a cadaver study, pp 995-998. n of forces in lower extremities of the musculo-skeletal system, pp.581-592, 1993.

E. Sobel, S. Levitz, M. Caselli, . Journal, H. Sommer et al., Orthoses in the treatment of rearfoot problems Three-dimensional osteometric scaling and Stacoff A, 1982.

R. Stagni and A. Leardini, Effects of hip joint centre mislocation on gait analysis results, Journal of Biomechanics, vol.33, issue.11, 2000.
DOI : 10.1016/S0021-9290(00)00093-2

R. Stagni, A. Leardini, A. Cappozzo, G. Benedetti, M. Cappello et al., non-rigid deformations using octree-splines w software for prediction of femoral neck fractures, Direct comparison of Journal of Biomechanics International Journal of Computer Vision Computer Methods and Programs Biomedicine, vol.36, issue.75, pp.929-936, 2000.

A. Saxena and J. Haddad, The Effect of Foot Orthoses on Patellofemoral Pain Syndrome, Journal of the American Podiatric Medical Association, vol.93, issue.4, 2003.
DOI : 10.7547/87507315-93-4-264

A. Seireg and M. Gerath, An in vivo investigation of wear in animal joints, Journal of Biomechanics, vol.8, issue.3-4, pp.169-172, 1975.
DOI : 10.1016/0021-9290(75)90021-4

D. Shepherd and B. Seedhom, Thickness of human articular cartilage in joints of the lower limb, Annals of the Rheumatic Diseases, vol.58, issue.1, pp.27-34, 1999.
DOI : 10.1136/ard.58.1.27

S. Siegler and W. Liu, The Three-Dimensional Passive Support Characteristics of Ankle Braces, Journal of Orthopaedic & Sports Physical Therapy, vol.26, issue.6, pp.299-302, 1997.
DOI : 10.2519/jospt.1997.26.6.299

W. Skalli, F. Lavaste, and J. Descrimes, Quantification of Three-Dimensional Vertebral Rotations in Scoliosis: What Are the True Values?, Spine, vol.20, issue.5, pp.546-553, 1995.
DOI : 10.1097/00007632-199503010-00008

S. Snyder and E. Schneider, Estimation of mechanical properties of cortical bone by computed tomography, Journal of Orthopaedic Research, vol.17, issue.3, pp.422-431, 1991.
DOI : 10.1002/jor.1100090315

R. Szeliski, S. Lavalée, D. Testi, A. Cappello, F. Sgallari et al., Matching 3-D anatomical surfaces with A ne, 1996.

J. Thompson, R. Jennings, and W. Hodge, Orthotic therapy in the management of osteoarthritis, Journal of the American Podiatric Medical Association, vol.82, issue.3, pp.136-139, 1992.
DOI : 10.7547/87507315-82-3-136

C. Thompson, Initiation à l'anatomie du mouvement " . Editions Vigot, 1993.

H. Tohyama, K. Yasuda, and K. Kaneda, Treatment of osteoarthritis of the knee with heel wedges, International Orthopaedics, vol.215, issue.1, pp.31-33, 1991.
DOI : 10.1007/BF00210530

G. Touzot, G. Dhatt, D. Engineering-with-tsirakos, V. Baltzopoulos, and R. Bartlett, Une représentation de la méthode des éléments finis A contouring program based on dual kriging interpolation Inverse optimization: functional and physiological logy and Health Care ribution during simulated gait and cartilage thickness in the human hip joint, ce of mechanical properties of subchondral plate, femoral head and neck on dynamic stress distribution of the articular cartilage, pp.271-279, 1984.

S. White, H. Yack, and D. Winter, A three dimensional musculoskeletal model for gait analysis, 1989.

K. Widmer, B. Zurfluh, and E. Morscher, Load transfer and fixation mode of press-fit acetabular sockets, The Journal of Arthroplasty, vol.17, issue.7, 2002.
DOI : 10.1054/arth.2002.34526

T. Wickiewicz, R. Roy, P. Powell, and V. Edgerton, Muscle Architecture of the Human Lower Limb, Clinical Orthopaedics and Related Research, vol.179, issue.1, 1983.
DOI : 10.1097/00003086-198310000-00042

R. Willinger, . De-la-loi-de, S. Woo, B. Simon, S. Kuei et al., Forces musculaires dans une articulation Modélisation, 1979.

G. Yamaguchi, A. Sawa, D. Moran, M. Fessler, and J. Wint, A survey of human musculotendon g, Journal of Biomechanics, vol.39, pp.1996-2004, 1990.

M. Vaverka, T. Navrat, M. Vrbka, Z. Florian, V. Fuis et al., Stress and strain analysis of the hip joint using FEM Quantitative determination of joint incongruity and pressure dist, 1999.

H. Wei, S. Sun, S. Jao, C. Yeh, and C. Cheng, The influence of mechanical properties of subchondral plate, femoral head and neck on dynamic stress distribution of the articular cartilage, Medical Engineering & Physics, vol.27, issue.4, pp.295-304, 2005.
DOI : 10.1016/j.medengphy.2004.12.008

K. Yasuda and T. Sasaki, The mechanics of treatment of the osteoarthritic knee with a wedged insole, Clinical Orthopaedics and Related Reserach, vol.215, pp.162-172, 1987.

H. Yoshida, A. Faust, J. Wilckens, M. Kitagawa, J. Fetto et al., Three-dimensional dynamic hip contact area and pressure distribution during activities of daily livin, 2006.

C. Yucesoy, B. Koopman, P. Huijing, and H. Grootenboer, Three-dimensional finite element modeling of skeletal muscle using a two-domain approach: linked fiber-matrix mesh model, Biomechanics VIII-B (Edité par Matsui H et Kobayashi K, pp.1253-1262, 1983.
DOI : 10.1016/S0021-9290(02)00069-6

H. Zhang, . Gs, R. Escamilla, and S. Barrentine, An analytical model of the knee for estimation of internal forces during exercise, Journal of Biomechanics, vol.31, issue.10, pp.963-967, 1995.
DOI : 10.1016/S0021-9290(98)00056-6