B. Miracle, The Physical and Mechanical Properties of NiAl, Acta Metallurgica et Materialia, vol.41, pp.3-649, 1993.

W. Gleeson, S. Wang, D. Hayashi, and . Sordelet, Effects of Platinum on the Interdiffusion and Oxidation Behavior of Ni-Al-Based Alloys, Materials Science Forum, vol.461, issue.464, pp.461-464, 2004.
DOI : 10.4028/www.scientific.net/MSF.461-464.213

Y. Minamino, N. Koizumi, M. Tsuji, K. Morioka, Y. Hirao et al., Pt diffusion in B2-type ordered NiAl intermetallic compound and its diffusion mechanisms, Science and Technology of Advanced Materials, vol.67, issue.4, pp.237-249, 2000.
DOI : 10.1016/0966-9795(93)90035-T

K. Angenete, F. Stiller, and . Danoix, Field-evaporation of {001} planes and site occupancy of Pt in ??-NiAl, Materials Science and Engineering: A, vol.353, issue.1-2, pp.68-73, 2003.
DOI : 10.1016/S0921-5093(02)00669-X

M. F. Jiang, D. J. Besser, B. Sordelet, and . Gleeson, A combined first-principles and experimental study of the lattice site preference of Pt in B2 NiAl, Acta Materialia, vol.53, issue.7, pp.53-2101, 2005.
DOI : 10.1016/j.actamat.2004.12.038

J. Larson and M. K. Miller, Atom Probe Field-Ion Microscopy Characterization of Nickel and Titanium Aluminides, Materials Characterization, vol.44, issue.1-2, pp.44-159, 2000.
DOI : 10.1016/S1044-5803(99)00049-2

M. K. Jayaram and . Miller, Direct observation of zirconium segregation to dislocations and grain boundaries in NiAl, Scripta Metallurgica et Materialia, pp.1-19, 1995.
DOI : 10.1016/0956-716X(95)00036-U

Z. X. Song, R. Guo, D. Yang, and . Li, First principles study of site substitution of ternary elements in NiAl, Acta Materialia, vol.49, issue.9, pp.49-1647, 2001.
DOI : 10.1016/S1359-6454(01)00052-0

H. Bozzolo, R. D. Noebe, and C. Amador, Site occupancy of ternary additions to B2 alloys, Intermetallics, vol.10, issue.2, pp.10-149, 2002.
DOI : 10.1016/S0966-9795(01)00124-8

Y. Y. Nash and . Pan, The Al-Ni-Zr system, Journal of Phase Equilibria, vol.12, pp.1-105, 1991.

P. Garriga-majo, B. A. Shollock, D. S. Mcphail, R. J. Chater, and J. F. Walker, Novel strategies for evaluating the degradation of protective coatings on superalloys, Novel Strategies for Evaluating the Degradation of Protective Coatings on Superalloys, pp.325-336, 1999.
DOI : 10.1016/S1466-6049(99)00047-1

A. Pint, J. R. Martin, and L. W. Hobbs, The Oxidation Mechanism of ?-Al 2 O 3 Scales, Solid State Ionics, pp.78-99, 1995.

J. Grabke, Oxidation of Aluminides, Materials Science Forum, vol.251, issue.254, pp.251-254, 1997.
DOI : 10.4028/www.scientific.net/MSF.251-254.149
URL : https://hal.archives-ouvertes.fr/jpa-00252379

W. Brumm and H. J. Grabke, The oxidation behaviour of NiAl-I. Phase transformations in the alumina scale during oxidation of NiAl and NiAl-Cr alloys, Corrosion Science, vol.33, issue.11, pp.33-1677, 1992.
DOI : 10.1016/0010-938X(92)90002-K

. Cadoret, Effet du platine et du soufre sur l'oxydation des revêtements protecteurs ?-NiAl à haute température. Applications aux barrières thermiques, Thèse de Doctorat de l'Université Pierre et Marie Curie, 2005.

M. N. Prasanna, A. S. Khanna, R. Chandra, and W. J. Quadakkers, Effect of?-alumina formation on the growth kinetics of alumina-forming superalloys, Oxidation of Metals, vol.131, issue.5-6, pp.5-465, 1996.
DOI : 10.1007/BF01048641

H. Stott, The Oxidation of Alumina-Forming Alloys, Materials Science Forum, vol.251, issue.254, pp.251-254, 1997.
DOI : 10.4028/www.scientific.net/MSF.251-254.19
URL : https://hal.archives-ouvertes.fr/jpa-00254037

F. Yang, W. Wang, and . Wu, Effect of Microcrystallization on the Cyclic Oxidation Behavior of ?-NiAl Intermetallics at 1100°C in Air, Intermetallics, issue.9, pp.741-744, 2001.

C. Rybicki and J. L. Smialek, Effect of the ?-?-Al 2 O 3 Transformation on the Oxidation Behavior of ?-NiAl+Zr, Oxidation of Metals, pp.31-275, 1989.

A. Pint, J. R. Martin, and L. W. Hobbs, 18 O/SIMS Characterization of the Growth Mechanism of Doped and Undoped ?-Al 2 O 3, Oxidation of Metals, pp.39-167, 1993.

E. Mennicke, M. Schumann, R. J. Rühle, G. I. Hussey, M. J. Sproule et al., The Effect of Yttrium on the Growth Process and Microstructure of ?-Al 2 O 3 on FeCrAl, Oxidation of Metals, vol.49, issue.6, pp.5-455, 1998.

K. Tolpygo and D. R. Clarke, Microstructural evidence for counter-diffusion of aluminum and oxygen during the growth of alumina scales, Materials at high temperatures, pp.3-261, 2003.
DOI : 10.4028/www.scientific.net/MSF.43.243

A. Pint, I. G. Wright, W. Y. Lee, Y. Zhang, K. Prübner et al., Substrate and bond coat compositions: factors affecting alumina scale adhesion, Substrate and Bond Coat Compositions : Factors Affecting Alumina Scale Adhesion, pp.201-211, 1998.
DOI : 10.1016/S0921-5093(97)00851-4

A. Pint, B. A. Nagaraj, and M. A. Rosenzweig, Evaluation of TBC-Coated ?-NiAl Substrates without a Bond Coat, Elevated Temperature Coatings: Science and Technonlogy II, pp.163-174, 1996.

K. Monceau, R. Bouhanek, A. Peraldi, B. Malie, and . Pieraggi, Transition in high-temperature oxidation kinetics of Pd-modified aluminide coatings: Role of oxygen partial pressure, heating rate, and surface treatment, Journal of Materials Research, vol.73, issue.03, pp.3-665, 2000.
DOI : 10.1023/A:1018860909826

J. W. Liu, Y. H. Byeon, and . Sohn, Effects of phase constituents/microstructure of thermally grown oxide on the failure of EB-PVD thermal barrier coating with NiCoCrAlY bond coat, Surface and Coatings Technology, vol.200, issue.20-21, pp.20-21, 2006.
DOI : 10.1016/j.surfcoat.2005.08.140

S. Murphy, K. L. More, and M. J. Lance, As-deposited mixed zone in thermally grown oxide beneath a thermal barrier coating, Surface and Coatings Technology, vol.146, issue.147, pp.146-147, 2001.
DOI : 10.1016/S0257-8972(01)01371-8

B. Laxman, B. W. Franke, Y. H. Kempshall, L. A. Sohn, K. S. Giannuzzi et al., Phase Transformation of Thermally Grown Oxide on (Ni,Pt)Al Bondcoat During Electron Beam Physical Vapor Deposition and Subsequent Oxidation, Surface and Coatings Technology, pp.177-178, 2004.

K. Tolpygo and D. R. Clarke, Microstructural study of the theta-alpha transformation in alumina scales formed on nickel-aluminides, Materials at High Temperatures, vol.76, issue.6, pp.1-59, 2000.
DOI : 10.1007/BF01046985

K. Tolpygo, D. R. Clarke, and K. S. Murphy, The effect of grit blasting on the oxidation behavior of a platinum-modified nickel-aluminide coating, Metallurgical and Materials Transactions A, vol.90, issue.95, pp.32-1467, 2001.
DOI : 10.1007/s11661-001-0235-2

K. Tolpygo and D. R. Clarke, The effect of oxidation pre-treatment on the cyclic life of EB-PVD thermal barrier coatings with platinum???aluminide bond coats, Surface and Coatings Technology, vol.200, issue.5-6, pp.200-1276, 2005.
DOI : 10.1016/j.surfcoat.2005.07.088

E. H. Vaidyanathan, M. Jordan, and . Gell, Surface geometry and strain energy effects in the failure of a (Ni,Pt)Al/EB-PVD thermal barrier coating, Acta Materialia, vol.52, issue.5, pp.52-1107, 2004.
DOI : 10.1016/j.actamat.2003.10.043

M. Lipkin, D. R. Clarke, M. Hollatz, M. Bobeth, and W. Pompe, Stress development in alumina scales formed upon oxidation of (111) NiAl single crystals, Corrosion Science, vol.39, issue.2, pp.2-231, 1997.
DOI : 10.1016/S0010-938X(97)83344-6

Y. Hou, A. P. Paulikas, and B. W. Veal, Stress Development and Relaxation in Al 2 O 3 during Early Stage Oxidation of ?-NiAl, Materials at High Temperature, pp.22-535, 2005.

K. Tolpygo, D. R. Clarke, and K. S. Murphy, Oxidation-induced failure of EB-PVD thermal barrier coatings, Surface and Coatings Technology, vol.146, issue.147, pp.146-147, 2001.
DOI : 10.1016/S0257-8972(01)01482-7

M. Kim, N. M. Yanar, E. N. Hewitt, F. S. Pettit, and G. H. Meier, The effect of the type of thermal exposure on the durability of thermal barrier coatings, Scripta Materialia, vol.46, issue.7, pp.46-489, 2002.
DOI : 10.1016/S1359-6462(02)00016-7

E. H. Wen, M. Jordan, and . Gell, Effect of temperature on rumpling and thermally grown oxide stress in an EB-PVD thermal barrier coating, Surface and Coatings Technology, vol.201, issue.6, pp.3289-3298, 2006.
DOI : 10.1016/j.surfcoat.2006.07.212

M. R. Begley, D. R. Mumm, A. G. Evans, and J. W. Hutchinson, Analysis of a wedge impression test for measuring the interface toughness between films/coatings and ductile substrates, Acta Materialia, vol.48, issue.12, pp.12-3211, 2000.
DOI : 10.1016/S1359-6454(00)00108-7

X. Zhao, P. Wang, and . Xiao, Sintering and failure behaviour of EB-PVD thermal barrier coating after isothermal treatment, Surface and Coatings Technology, vol.200, issue.20-21, pp.20-21, 2006.
DOI : 10.1016/j.surfcoat.2005.09.006

M. Kumar, D. L. Nasrallah, and . Douglass, The effect of yttrium and thorium on the oxidation behavior of Ni-Cr-Al alloys, Oxidation of Metals, vol.239, issue.4, pp.227-263, 1974.
DOI : 10.1007/BF00604042

W. Brumm and H. J. Grabke, Oxidation behaviour of NiAl???II. Cavity formation beneath the oxide scale on NiAl of different stoichiometries, Corrosion Science, vol.34, issue.4, pp.4-547, 1993.
DOI : 10.1016/0010-938X(93)90271-H

M. Zimmermann, M. Bobeth, D. R. Rühle, and . Clarke, Oxidation-induced cavity formation in binary ??-NiAl alloys, Zeitschrift fur Metallkunde 95, pp.84-90, 2004.
DOI : 10.3139/146.017923

K. Angenete, Stiller, Oxidation of Simple and Pt-Modified Aluminide Diffusion Coatings on Ni-Base Superalloys-II. Oxide Scale Failure, Oxidation of Metals, vol.60, issue.1/2, pp.83-101, 2003.
DOI : 10.1023/A:1024617313726

D. Oquab and . Monceau, A Microscopy Study of Spalling and Growth Mechanism of the Oxide Scale Formed on Pd Modified Nickel Aluminum, Materials Science Forum, vol.369, issue.372, pp.369-372, 2001.
DOI : 10.4028/www.scientific.net/MSF.369-372.499

D. Oquab and . Monceau, In-situ SEM study of cavity growth during high temperature oxidation of ??-(Ni,Pd)Al, Scripta Materialia, vol.44, issue.12, pp.44-2741, 2001.
DOI : 10.1016/S1359-6462(01)00959-9

A. Pint, On the formation of interfacial and internal voids in??-Al2O3 scales, Oxidation of Metals, vol.19, issue.2, pp.303-328, 1997.
DOI : 10.1007/BF01670505

Y. Hou, Y. Niu, and C. Van-lienden, Analysis of Pore Formation at Oxide-Alloy Interfaces-I : Experimental Results on FeAl, Oxidation of Metals, vol.59, issue.1/2, pp.41-61, 2003.
DOI : 10.1023/A:1023013931251

R. Ibegazene-ouali, C. Mevrel, Y. Rio, and . Renollet, Microstructural Evolution and Degradation Modes in Cyclic and Isothermal Oxidation of an EB-PVD Thermal Barrier Coating, Materials at High Temperature, vol.17, pp.2-205, 2000.

K. Tolpygo and D. R. Clarke, Wrinkling of ?-Alumina Films Grown by Thermal Oxidation-II. Oxide Separation and Failure, Acta Materialia, vol.46, pp.14-5167, 1998.

W. Fukenbusch, J. G. Smeggil, and N. S. Bornstein, Reactive Element-Sulfur Interaction and Oxide Scale Adherence, Metallurgical Transactions, pp.16-1164, 1985.

L. Smialek, Adherent Al 2 O 3 Scales Formed on Undoped NiCrAl Alloys, Metallurgical Transactions, pp.18-164, 1987.

L. Smialek, Effect of Sulfur Removal on Al 2 O 3 Scale Adhesion, Metallurgical and Materials Transactions, pp.22-739, 1991.

D. Cadoret, M. Monceau, P. Bacos, V. Josso, P. Maurice et al., Effect of Platinum on the Growth Rate of the Oxide Scale Formed on Cast Nickel Aluminide Intermetallic Alloys, Oxidation of Metals, vol.3, issue.464, pp.185-205, 2005.
DOI : 10.1007/s11085-005-6558-4
URL : https://hal.archives-ouvertes.fr/hal-00082199

L. Smialek, D. T. Jayne, J. C. Schaeffer, and W. H. Murphy, Effects of hydrogen annealing, sulfur segregation and diffusion on the cyclic oxidation resistance of superalloys: a review, Thin Solid Films, vol.253, issue.1-2, pp.235-285, 1994.
DOI : 10.1016/0040-6090(94)90335-2

Y. Hou and J. L. Smialek, The Effect of H 2 -Anneal on the Adhesion of Al 2 O 3 scales on a Fe 3 Al-Based Alloy, Materials at High Temperature, pp.17-79, 2000.

Y. Lee, Y. Zhang, I. G. Wright, B. A. Pint, and P. K. Liaw, Effects of sulfur impurity on the scale adhesion behavior of a desulfurized Ni-based superalloy aluminized by chemical vapor deposition, Metallurgical and Materials Transactions A, vol.9, issue.3, pp.29-833, 1998.
DOI : 10.1007/s11661-998-0274-z

P. Y. Molins and . Hou, Characterization of chemical and microstructural evolutions of a NiPtAl bondcoat during high temperature oxidation, Surface and Coatings Technology, vol.201, issue.7, pp.3841-3845, 2006.
DOI : 10.1016/j.surfcoat.2006.07.251
URL : https://hal.archives-ouvertes.fr/hal-00139150

I. Molins, P. Rouzou, and . Hou, A TEM study of sulfur distribution in oxidized Ni40Al and its effect on oxide growth and adherence, Materials Science and Engineering: A, vol.454, issue.455, pp.454-455, 2007.
DOI : 10.1016/j.msea.2006.11.015
URL : https://hal.archives-ouvertes.fr/hal-00149347

Y. Hou and J. Moskito, Sulfur Segregation to Al 2 O 3 -FeAl Interfaces Studied by Field Emission-Auger Electron Spectroscopy, Oxidation of Metals, vol.59, issue.5/6, pp.559-573, 2003.
DOI : 10.1023/A:1023627424723

V. Rivoaland, P. Maurice, M. P. Josso, P. Bacos, and I. Marcus, Sulfur Segregation on the Metallic Surface of NiAl (001) Single-Crystals and at NiAl (001) Interfaces, Oxidation of Metals, pp.60-137, 2003.

Y. Hou, K. Prüssner, D. H. Fairbrother, J. G. Roberys, and K. B. Alexander, Sulfur Segregation to Deposided Al 2 O 3 Film/Alloy Interface at 1000°C, Scripta Materialia, pp.40-241, 1999.

Y. Hou and J. Stringer, Oxide scale adhesion and impurity segregation at the scale/metal interface, Oxidation of Metals, vol.4, issue.6, pp.323-345, 1992.
DOI : 10.1007/BF00665658

Y. Hou and K. F. Mccarty, Surface and interface segregation in ??-NiAl with and without Pt addition, Scripta Materialia, vol.54, issue.5, pp.937-941, 2006.
DOI : 10.1016/j.scriptamat.2005.10.065

M. Carling and E. A. Carter, Effects of Segregating Elements on the Adhesive Strength and Structure of the ?-Al 2 O 3 /?-NiAl Interface, Acta Materialia, pp.55-2791, 2007.

J. Bennett and W. G. Sloof, Modelling the influence of reactive elements on the work of adhesion between a thermally grown oxide and a bond coat alloy, Materials and Corrosion, vol.46, issue.69, pp.3-223, 2006.
DOI : 10.1002/maco.200503928

J. Grabke, D. Wiemer, and H. V. Viefhaus, Segregation of sulfur during growth of oxide scales, Applied Surface Science, vol.47, issue.3, pp.47-243, 1991.
DOI : 10.1016/0169-4332(91)90038-L

J. Grabke, G. Kurbatov, and H. J. Schmutzler, Segregation beneath oxide scales, Oxidation of Metals, vol.58, issue.1-2, pp.97-114, 1995.
DOI : 10.1007/BF01046749

Y. Hou and K. Priimak, Interfacial Segregation, Pore Formation, and Scale Adhesion on NiAl Alloys, Oxidation of Metals, vol.34, issue.1-2, pp.113-130, 2005.
DOI : 10.1007/s11085-005-1954-3

A. Pint, K. L. More, and I. G. Wright, Effect of Quaternary Additions on the Oxidation Behavior of Hf-Doped NiAl, Oxidation of Metals, vol.59, issue.3/4, pp.257-283, 2003.
DOI : 10.1023/A:1023087926788

F. An, H. R. Guan, X. F. Sun, and Z. Q. Hu, Effect of the ?-?-Al 2 O 3 Transformation in scales on the Oxidation Behavior of a Nickel-Base Superalloy with an Aluminide Diffusion Coating, Oxidation of Metals, vol.54, issue.3/4, pp.301-316, 2000.
DOI : 10.1023/A:1004654429687

A. Van-manen, G. W. Leibbrandt, R. Klumpes, and J. H. De-witt, The oxidation mechanism of Pt 20 Ni 30 Al 50, Journal de Physique IV, vol.3, pp.123-131, 1993.
URL : https://hal.archives-ouvertes.fr/jpa-00252341

D. Vialas and . Monceau, Effect of Pt and Al content on the long-term, high temperature oxidation behavior and interdiffusion of a Pt-modified aluminide coating deposited on Ni-base superalloys, Surface and Coatings Technology, vol.201, issue.7, pp.7-3846, 2006.
DOI : 10.1016/j.surfcoat.2006.07.246

M. Karlsson, J. W. Hutchinson, and A. G. Evans, A fundamental model of cyclic instabilities in thermal barrier systems, Journal of the Mechanics and Physics of Solids, vol.50, issue.8, pp.1565-1589, 2002.
DOI : 10.1016/S0022-5096(02)00003-0

C. Zhang and A. H. Heuer, Microstructural evolution of the nickel platinum-aluminide bond coat on electron-beam physical-vapor deposition thermal-barrier coatings during high-temperature service, Metallurgical and Materials Transactions A, vol.163, issue.164, pp.36-43, 2005.
DOI : 10.1007/s11661-005-0137-9

J. Kim and M. E. Walter, Characterization of the Degraded Microstructures of a Platinum Aluminide Coating, Materials Science and Engineering, pp.360-367, 2003.

H. Chen and J. A. Little, Degradation of the Platinum Aluminide Coating on CMX4 at 1100°C, Surface and Coatings Technology, pp.92-69, 1997.

W. Chen, M. L. Glynn, R. T. Ott, T. C. Hufnagel, and K. J. Hemker, Characterization and modeling of a martensitic transformation in a platinum modified diffusion aluminide bond coat for thermal barrier coatings, Acta Materialia, vol.51, issue.14, pp.51-4279, 2003.
DOI : 10.1016/S1359-6454(03)00255-6

A. Bond and C. , The Minerals, Elevated Temperature Coatings : Science and Technology III, pp.185-196, 1999.

K. Angenete and . Stiller, A comparative study of two inward grown Pt modified Al diffusion coatings on a single crystal Ni base superalloy, Materials Science and Engineering: A, vol.316, issue.1-2, pp.316-182, 2001.
DOI : 10.1016/S0921-5093(01)01236-9

K. Angenete and . Stiller, Comparison of inward and outward grown Pt modified aluminide diffusion coatings on a Ni based single crystal superalloy, Surface and Coatings Technology, vol.150, issue.2-3, pp.107-118, 2002.
DOI : 10.1016/S0257-8972(01)01544-4

C. Jia, K. Ishida, and T. Nishizawa, Partition of alloying elements between ?? (A1), ????? (L12), and ?? (B2) phases in Ni-Al base systems, Metallurgical and Materials Transactions A, vol.35, issue.3, pp.25-473, 1994.
DOI : 10.1007/BF02651589

J. Sordelet, M. F. Besser, R. T. Ott, B. J. Zimmerman, W. D. Porter et al., Isothermal nature of martensite formation in Pt-modified ??-NiAl alloys, Acta Materialia, vol.55, issue.7, pp.7-2433, 2007.
DOI : 10.1016/j.actamat.2006.11.038

M. J. Reid, J. S. Pomeroy, and . Robinson, Microstructural Transformation in Platinum Aluminide Coated on CMSX-4 Superalloy, Presented at the 6th International Symposium on High Temperature Corrosion and Protection of Materials, 2004.
DOI : 10.4028/www.scientific.net/MSF.461-464.343

H. Kainuma, K. Ohtani, and . Ishida, Effect of alloying elements on martensitic transformation in the binary NiAl(??) phase alloys, Metallurgical and Materials Transactions A, vol.12, issue.9, pp.9-2445, 1996.
DOI : 10.1007/BF02652338

K. Tolpygo and D. R. Clarke, Surface rumpling of a (Ni, Pt)Al bond coat induced by cyclic oxidation, Acta Materialia, vol.48, issue.13, pp.48-3283, 2000.
DOI : 10.1016/S1359-6454(00)00156-7

K. Tolpygo and D. R. Clarke, On the Rumpling Mechanism in Nickel-Aluminide Coatings. Part II : Characterization of Surface Undulations and Bond Coat Swelling, Acta Materialia, pp.52-5129, 2004.

Y. Xie, E. Sohn, M. Jordan, and . Gell, The effect of bond coat grit blasting on the durability and thermally grown oxide stress in an electron beam physical vapor deposited thermal barrier coating, Surface and Coatings Technology, vol.176, issue.1, pp.176-57, 2003.
DOI : 10.1016/S0257-8972(03)00466-3

E. H. Wen, M. Jordan, and . Gell, Evolution of photo-stimulated luminescence of EB-PVD/(Ni, Pt)Al thermal barrier coatings, Materials Science and Engineering: A, vol.398, issue.1-2, pp.398-99, 2005.
DOI : 10.1016/j.msea.2005.03.020

K. Tolpygo and D. R. Clarke, On the Rumpling Mechanism in Nickel-Aluminide Coatings. Part I : an Experimental Assessment, Acta Materialia, pp.52-5115, 2004.

S. Balint and J. W. Hutchinson, Undulation instability of a compressed elastic film on a nonlinear creeping substrate, Acta Materialia, vol.51, issue.13, pp.51-3965, 2003.
DOI : 10.1016/S1359-6454(03)00221-0

S. Balint and J. W. Hutchinson, An analytical model of rumpling in thermal barrier coatings, Journal of the Mechanics and Physics of Solids, vol.53, issue.4, pp.949-973, 2005.
DOI : 10.1016/j.jmps.2004.11.002

T. Cape, Method of applying metallic coatings, Brevet US, p.3107175, 1963.

G. Bungardt, H. W. Lehnert, and . Meinhardt, Protective Diffusion Layer on Nickel and/or Cobalt-Based Alloys, Brevet US, p.3677789, 1972.

H. Todd, Oxidation Resistant Coating and Article, Brevet US, vol.3494748, 1970.

H. Meier and F. S. Pettit, High-temperature corrosion of alumina-forming coatings for superalloys, Surface and Coatings Technology, vol.39, issue.40, pp.40-41, 1989.
DOI : 10.1016/0257-8972(89)90036-4

G. Fountain, F. A. Golightly, F. H. Stott, and G. C. Wood, Influence of Pt on the Maintenance of ?-Al 2 O 3 as a Protective Scale, Oxidation of Metals, pp.10-341, 1976.

J. Felten, F. S. Pettit, and . Development, Development, growth, and adhesion of Al2O3 on platinum-aluminum alloys, Oxidation of Metals, vol.9, issue.3, pp.189-223, 1976.
DOI : 10.1007/BF00612159

R. Jackson and J. R. Rairden, The aluminization of platinum and platinum-coated IN-738, Metallurgical Transactions A, vol.14, issue.10, pp.1697-1707, 1977.
DOI : 10.1007/BF02646872

M. Cadoret, P. Bacos, V. Josso, P. Maurice, S. Marcus et al., Effect of Pt Additions on the Sulfur Segregation, Void Formation and Oxide Scale Growth of Cast Nickel Aluminides, Materials Science Forum, vol.461, issue.464, pp.461-464, 2004.
DOI : 10.4028/www.scientific.net/MSF.461-464.247

J. Felten, Use of platinum and rhodium to improve oxide adherence on Ni-8Cr-6Al alloys, Oxidation of Metals, vol.239, issue.1, pp.23-28, 1976.
DOI : 10.1007/BF00611696

R. Bouchet, Calculating the Composition-Dependent Diffusivity Matrix along a Diffusion Path in Ternary Systems Application to ?-(Ni,Pt)Al, Calphad, pp.295-303, 2003.

J. Svensson, K. Angenete, and . Stiller, Microstructure of Oxide Scales on Aluminide Diffusion Coatings after Short Time Oxidation at 1050°C, Surface and Coatings Technology, pp.177-178, 2004.

D. Vialas and . Monceau, Effect of Pt and Al content on the long-term, high temperature oxidation behavior and interdiffusion of a Pt-modified aluminide coating deposited on Ni-base superalloys, Surface and Coatings Technology, vol.201, issue.7, pp.201-3846, 2006.
DOI : 10.1016/j.surfcoat.2006.07.246

W. L. Zhang, J. A. Lee, I. G. Haynes, B. A. Wright, K. M. Pint et al., Synthesis and cyclic oxidation behavior of a (Ni, Pt) Al coating on a desulfurized Ni-base superalloy, Metallurgical and Materials Transactions 30A, pp.2679-2687, 1999.
DOI : 10.1007/s11661-999-0308-1

P. Taylor, H. E. Evans, and E. P. Busso, Creep properties of a Pt???aluminide coating, Acta Materialia, vol.54, issue.12, pp.54-3241, 2006.
DOI : 10.1016/j.actamat.2006.03.010

D. Pan, M. W. Chen, P. K. Wright, and K. J. Hemker, Evolution of a diffusion aluminide bond coat for thermal barrier coatings during thermal cycling, Acta Materialia, vol.51, issue.8, pp.51-2205, 2003.
DOI : 10.1016/S1359-6454(03)00014-4

R. Passilly, Microindentation instrument??e de 20 ?? 900 ??C sur mat??riaux constitutifs de barri??res thermiques, Mat??riaux & Techniques, vol.93, issue.7-8, pp.289-300, 2005.
DOI : 10.1051/mattech:2005017

A. Pint, Experimental observations in support of the dynamic-segregation theory to explain the reactive-element effect, Oxidation of Metals, vol.120, issue.60, pp.1-37, 1996.
DOI : 10.1007/BF01046818

Y. Hou, Impurity Effects on Alumina Scale Growth, Journal of the American Ceramic Society, vol.13, issue.121, pp.660-668, 2003.
DOI : 10.1111/j.1151-2916.2003.tb03355.x

J. C. Schumann, M. Yang, M. J. Rühle, and . Graham, High-Resolution SIMS and Analytical TEM Evaluation of Alumina Scales on ?-NiAl Containing Zr or Y, Oxidation of Metals, pp.1-37, 1996.

C. Dickey, B. A. Pint, K. B. Alexander, and I. G. Wright, Oxidation Behavior of Platinum-Aluminium Alloys and the Effect of Zr Doping, Journal of Materials Research, vol.14, pp.12-4531, 1999.

J. C. Schumann, M. J. Yang, M. Graham, and . Rühle, The effect of Y and Zr on the Oxidation of NiAl, Materials and Corrosion/Werkstoffe und Korrosion, vol.34, issue.11, pp.47-631, 1996.
DOI : 10.1002/maco.19960471107

A. Ramanarayanan, M. Raghavan, and R. Petkovic-luton, The Characteristics of Alumina Scales Formed on Fe-Based Yttria-Dispersed Alloys, Journal of The Electrochemical Society, vol.131, issue.4, pp.4-923, 1984.
DOI : 10.1149/1.2115728

A. Pint and L. W. Hobbs, Limitations on the Use of Ion Implantation for the Study of the Reactive Element Effect in ??-NiAl, Journal of The Electrochemical Society, vol.141, issue.9, pp.9-2443, 1994.
DOI : 10.1149/1.2055140

S. Jedlinski, S. Lazarski, K. Mrowec, and . Przybylski, The Influence of Implanted Yttrium on the Growth of ?-Al 2 O 3 Scale on ?-NiAl, Bulletin of the Polish Academy of Sciences Chemistry, vol.33, issue.4, pp.139-146, 1985.

K. Tolpygo, The Morphology of Thermally Grown ?-Al 2 O 3 Scales on Fe-Cr-Al Alloys, Oxidation of Metals, vol.51, issue.5/6, pp.449-477, 1999.
DOI : 10.1023/A:1018839227090

B. A. Leyens, I. G. Pint, and . Wright, Effect of composition on the oxidation and hot corrosion resistance of NiAl doped with precious metals, Surface and Coatings Technology, vol.133, issue.134, pp.133-134, 2000.
DOI : 10.1016/S0257-8972(00)00878-1

J. R. Sarioglu, F. S. Blachere, G. H. Pettit, J. L. Meier, . Smialek et al., The Effects of Reactive Element Additions, Sulfur Removal, and Specimen Thickness on the Oxidation Behaviour of Alumina-Forming Ni-and Fe-Base Alloys, Materials Science Forum, vol.251, issue.254, pp.251-254, 1997.
DOI : 10.4028/www.scientific.net/MSF.251-254.405

A. Pint, Characterization of the high temperature oxidation of TBC-coated oxide-dispersed ??-NiAl substrates, Materials at High Temperatures, vol.13, issue.4, pp.4-403, 1997.
DOI : 10.1016/0010-938X(93)90314-7

J. Bennett and W. G. Sloof, The influence of reactive element additions to ??-NiAlCr alloys on the morphology of thermally grown oxides, Materials at High Temperatures, vol.2, issue.2, pp.3-395, 2003.
DOI : 10.1007/BF00742122

L. Smialek, The effect of Sulfur and Zirconium Co-doping on the Oxidation of NiCrAl, High Temperature Materials, vol.88, pp.5-241, 1987.

Y. Hou, Beyond the Sulfur Effect, Oxidation of Metals, vol.52, issue.3/4, pp.337-351, 1999.
DOI : 10.1023/A:1018899729758

L. Smialek and B. A. Pint, Optimizing Scale Adhesion on Single Crystal Superalloys, Materials Science Forum, vol.369, issue.372, pp.369-372, 2001.
DOI : 10.4028/www.scientific.net/MSF.369-372.459

J. C. Schumann, M. J. Yang, and . Graham, Direct observation of the interaction of yttrium and sulfur in oxidized NiAl, Scripta Materialia, vol.34, issue.9, pp.9-1365, 1996.
DOI : 10.1016/1359-6462(95)00662-1

L. Smialek, Non-protective alumina growth in sulfur-doped NiAl(Zr), Materials at High Temperatures, pp.1-71, 2000.
DOI : 10.1557/PROC-364-1273

K. Provenzano, N. P. Sadananda, J. R. Louat, and . Reed, Void Formation and Suppression During High Temperature Oxidation of MCrAlY-Typre Coatings, Surface and Coatings Technology, pp.36-61, 1988.

A. Manen, E. W. Young, D. Schalkoord, C. J. Van-der-wekken, and J. H. De-wit, The influence of Y on the structure and growth mechanism of alumina scales, Surface and Interface Analysis, vol.16, issue.7, pp.12-391, 1988.
DOI : 10.1002/sia.740120705

. Setti, Codoping of Alumina to Enhance Creep Resistance, Journal of American Ceramic Society, vol.82, pp.6-1497, 1999.

C. Cho, H. M. Wang, J. M. Chan, M. P. Rickman, and . Harmer, A Study of Grain-Boundary Structure in Rare-Earth Doped Aluminas Using an EBSD Technique, Journal of Materials Science, pp.37-59, 2002.

C. Cho, H. M. Wang, J. M. Chan, M. P. Rickman, and . Harmer, Role of segregating dopants on the improved creep resistance of aluminum oxide, Acta Materialia, vol.47, issue.15-16, pp.15-4197, 1999.
DOI : 10.1016/S1359-6454(99)00278-5

T. Liu and J. A. Horton-jr, Effect of refractory alloying additions on mechanical properties of near-stoichiometric NiAl, Materials Science and Engineering: A, vol.192, issue.193, pp.193-170, 1995.
DOI : 10.1016/0921-5093(94)03232-7

D. Whittenberger and R. D. Noebe, Strength loss in NiAl + Zr alloys at 1200 K, Materials Letters, vol.27, issue.6, pp.281-286, 1996.
DOI : 10.1016/0167-577X(96)00012-2

M. Bacos, S. Navéos, and P. Josso, Procédé pour former sur un métal un revêtement protecteur contenant de l'aluminium et du zirconium, Brevet FR, p.2853329, 2003.

. Journeau, Barrières thermiques : étude topographique de l'interface céramique/métal, Mémoire de Stage Technologie et Ingénierie mécanique Supméca, 2006.

D. R. He and . Clarke, Determination of the Piezospectroscopic Coefficients for Chromium-Doped Sapphire, Journal of the American Ceramic Society, vol.9, issue.11, pp.5-1347, 1995.
DOI : 10.1111/j.1151-2916.1995.tb08493.x

R. Clarke, R. J. Christensen, and V. Tolpygo, The evolution of oxidation stresses in zirconia thermal barrier coated superalloy leading to spalling failure, Surface and Coatings Technology, vol.94, issue.95, pp.94-95, 1997.
DOI : 10.1016/S0257-8972(97)00483-0

D. R. Heeg and . Clarke, Non-destructive thermal barrier coating (TBC) damage assessment using laser-induced luminescence and infrared radiometry, Surface and Coatings Technology, vol.200, issue.5-6, pp.1298-1302, 2005.
DOI : 10.1016/j.surfcoat.2005.07.091

. Margueron, Evaluation de la méthode de piézospectroscopie en vue d'un contrôle non-destructif de barrières thermiques EB-PVD, Thèse de Doctorat du Conservatoire National des Arts et Métiers, 2003.

A. Selçuk and . Atkinson, Analysis of the Cr 3+ Luminescence Spectra from Thermally Grown Oxide in Thermal Barrier Coatings, Material Science and Engineering, pp.335-147, 2002.

A. Nychka and D. R. Clarke, Damage quantification in TBCs by photo-stimulated luminescence spectroscopy, Surface and Coatings Technology, vol.146, issue.147, pp.146-147, 2001.
DOI : 10.1016/S0257-8972(01)01455-4

E. H. Wen, M. Jordan, and . Gell, Analysis of localized damage in EB-PVD/(Ni, Pt)Al thermal barrier coatings, Surface and Coatings Technology, vol.200, issue.18-19, pp.200-5193, 2006.
DOI : 10.1016/j.surfcoat.2005.05.044

J. Christensen, V. K. Tolpygo, and D. R. Clarke, The influence of the reactive element yttrium on the stress in alumina scales formed by oxidation, Acta Materialia, vol.45, issue.4, pp.1761-1766, 1997.
DOI : 10.1016/S1359-6454(96)00258-3

J. Mu, J. W. Liu, Y. H. Byeon, Y. L. Sohn, and . Nava, Long-term oxidation and phase transformations in aluminized CMSX-4 superalloys, Surface and Coatings Technology, vol.188, issue.189, pp.188-189, 2004.
DOI : 10.1016/j.surfcoat.2004.07.091

. Dugast, Contrôle de barrières thermiques d'aubes de turbine par mesure de la durée de vie de fluorescence, Mémoire d'ingénieur du Conservatoire National des Arts et Métiers, 2006.

. Dupeux, Mesure des ??nergies de rupture interfaciale??: probl??matique et exemples de r??sultats d'essais de gonflement-d??collement, M??canique & Industries, vol.5, issue.4, pp.441-450, 2004.
DOI : 10.1051/meca:2004044

. Laurencin, Amorçage et propagation d'une fissure à l'interface d'un bi-matériau, Mémoire d'ingénieur du Conservatoire National des Arts et Métiers, 2002.

A. Volinsky, N. R. Moody, and W. W. Gerberich, Interfacial toughness measurements for thin films on substrates, Acta Materialia, vol.50, issue.3, pp.50-441, 2002.
DOI : 10.1016/S1359-6454(01)00354-8

C. Cao and A. G. Evans, An experimental study of the fracture resistance of bimaterial interfaces, Mechanics of Materials, vol.7, issue.4, pp.295-304, 1989.
DOI : 10.1016/0167-6636(89)90020-3

G. Evans, M. Rühle, B. J. Dalgleish, and P. G. Charalambides, The Fracture Energy of Bimaterial Interfaces, Metallurgical Transaction, pp.21-2419, 1990.

Y. Arai, K. Okajima, and . Kishimoto, Mixed-mode interfacial fracture toughness for thermal barrier coating, Engineering Fracture Mechanics, vol.74, issue.13, pp.13-2055, 2007.
DOI : 10.1016/j.engfracmech.2006.10.021

G. Charalambides, J. Lund, A. G. Evans, and R. M. Mcmeeking, A Test Specimen for Determining the Fracture Resistance of Bimaterial Interfaces, Journal of Applied Mechanics, vol.56, issue.1, pp.56-77, 1989.
DOI : 10.1115/1.3176069

G. Charalambides, H. C. Cao, J. Lund, and A. G. Evans, Development of a test method for measuring the mixed mode fracture resistance of bimaterial interfaces, Mechanics of Materials, vol.8, issue.4, pp.8-269, 1990.
DOI : 10.1016/0167-6636(90)90047-J

S. G. Gan, Z. Mhaisalkar, S. Chen, Z. Zhang, K. Chen et al., Study of interfacial adhesion energy of multilayered ULSI thin film structures using four-point bending test, Surface and Coatings Technology, vol.198, issue.1-3, pp.1-3, 2005.
DOI : 10.1016/j.surfcoat.2004.10.036

Y. Zou, C. Huang, and . Wang, The Characterization and Measurement of Interfacial Toughness for Si 3 N 4 /BN Composites by the Four-Point Bend Test, Journal of the European Ceramic Society, pp.24-2861, 2004.

C. S. Lee, R. H. Litteken, W. D. Dauskardt, and . Nix, Comparison of the telephone cord delamination method for measuring interfacial adhesion with the four-point bending method, Acta Materialia, vol.53, issue.3, pp.3-609, 2005.
DOI : 10.1016/j.actamat.2004.10.014

M. Hofinger, H. Oechsner, M. V. Bahr, and . Swain, Modified Four-Point Bending Specimen for Determining the Interface Fracture Energy for Thin, Brittle Layers, International Journal of Fracture, pp.92-213, 1998.

A. Yamazaki, A. Schmidt, and . Scholz, The determination of the delamination resistance in thermal barrier coating system by four-point bending tests, Surface and Coatings Technology, vol.201, issue.3-4, pp.744-754, 2006.
DOI : 10.1016/j.surfcoat.2005.12.023

S. Qian, Y. Zhu, and . Kagawa, Crack Initiation and Propagation in Plasma Sprayed Thermal Barrier Coatings, th International Conference on Advanced Ceramics and Composites : A, pp.503-509, 2003.
DOI : 10.1002/9780470294802.ch72

D. R. Guo, A. M. Mumm, Y. Karlsson, and . Kagawa, Measurement of Interface Shear Mechanical Properties in Thermal Barrier Coating Systems by a Barb Pullout Method, Scripta Materialia, pp.53-1043, 2005.

Y. Guo, Y. Tanaka, and . Kagawa, Effect of interface roughness and coating thickness on interfacial shear mechanical properties of EB-PVD yttria-partially stabilized zirconia thermal barrier coating systems, Journal of the European Ceramic Society, vol.27, issue.12, pp.12-3425, 2007.
DOI : 10.1016/j.jeurceramsoc.2007.02.196

Y. Kim, Y. Liu, and . Kagawa, Evaluation of interfacial mechanical properties under shear loading in EB-PVD TBCs by the pushout method, Acta Materialia, vol.55, issue.11, pp.11-3771, 2007.
DOI : 10.1016/j.actamat.2007.02.027

J. L. Vasinonta and . Beuth, Measurement of interfacial toughness in thermal barrier coating systems by indentation, Engineering Fracture Mechanics, vol.68, issue.7, pp.68-843, 2001.
DOI : 10.1016/S0013-7944(00)00130-2

R. Mumm and A. G. Evans, On the role of imperfections in the failure of a thermal barrier coating made by electron beam deposition, Acta Materialia, vol.48, issue.8, pp.48-1815, 2000.
DOI : 10.1016/S1359-6454(99)00473-5

J. Mazot and . De-fouquet, Détermination par la méthode de résonance des constantes d'élasticité de monocristaux de superalliage base nickel AM1 entre l'ambiante et 1100°C, Mémoires et Etudes Scientifiques, pp.165-170, 1992.

Z. Huang, G. Suo, J. Xu, J. H. He, N. Prévost et al., Initiation and arrest of an interfacial crack in a four-point bend test, Engineering Fracture Mechanics, vol.72, issue.17, pp.72-2584, 2005.
DOI : 10.1016/j.engfracmech.2005.04.002

S. Hu, T. Guo, Y. Tomimatsu, Y. Ikuhara, and . Kagawa, TEM study on microstructure of thermally grown oxide in EB-PVD thermal barrier coatings, Surface and Coatings Technology, vol.200, issue.20-21, pp.20-21, 2005.
DOI : 10.1016/j.surfcoat.2005.09.037

J. Stiger, N. M. Yanar, R. W. Jackson, S. L. Laney, F. S. Pettit et al., Development of Intermixed Zones of Alumina, Thermal Barrier Coatings Systems, Metallurgical and Materials Transactions, 2007.

A. Haynes, Potential influences of bond coat impurities and void growth on premature failure of EB-PVD TBCs, Scripta Materialia, vol.44, issue.7, pp.44-1147, 2001.
DOI : 10.1016/S1359-6462(00)00703-X

M. Parks, A stiffness derivative finite element technique for determination of crack tip stress intensity factors, International Journal of Fracture, vol.187, issue.4, pp.487-502, 1974.
DOI : 10.1007/BF00155252

M. Y. Xu, A. G. He, and . Evans, A numerical assessment of the durability of thermal barrier systems that fail by ratcheting of the thermally grown oxide, Acta Materialia, vol.51, issue.13, pp.51-3807, 2003.
DOI : 10.1016/S1359-6454(03)00194-0

R. Mumm, M. Watanabe, A. G. Evans, and J. A. Pfaendtner, The influence of test method on failure mechanisms and durability of a thermal barrier system, Acta Materialia, vol.52, issue.5, pp.52-1123, 2004.
DOI : 10.1016/j.actamat.2003.10.045

S. Xu, C. Faulhaber, M. Mercer, A. Maloney, and . Evans, Observations and analyses of failure mechanisms in thermal barrier systems with two phase bond coats based on NiCoCrAlY, Acta Materialia, vol.52, issue.6, pp.52-1439, 2004.
DOI : 10.1016/j.actamat.2003.11.025

D. Martena, P. Botto, S. Fino, M. M. Sabbadini, C. Gola et al., Modelling of TBC system failure: Stress distribution as a function of TGO thickness and thermal expansion mismatch, Engineering Failure Analysis, vol.13, issue.3, pp.13-409, 2006.
DOI : 10.1016/j.engfailanal.2004.12.027

P. Busso, L. Wright, H. E. Evans, L. N. Mccartney, S. R. Saunders et al., A physics-based life prediction methodology for thermal barrier coating systems, Acta Materialia, vol.55, issue.5, pp.55-1491, 2007.
DOI : 10.1016/j.actamat.2006.10.023
URL : https://hal.archives-ouvertes.fr/hal-00134538

B. Miracle, The Physical and Mechanical Properties of NiAl, Acta Metallurgica et Materialia, vol.41, pp.3-649, 1993.

H. Rusovic and . Warlimont, Young's Modulus of B2-NiAl Alloys, Physical Status Solidi, pp.44-609, 1977.

D. J. Jiang, B. Sordelet, and . Gleeson, Effects of Pt on the elastic properties of B2 NiAl: A combined first-principles and experimental study, Acta Materialia, vol.54, issue.9, pp.9-2361, 2006.
DOI : 10.1016/j.actamat.2006.01.010

J. A. Thomson and T. W. Clyne, The Effect of Heat Treatment on the Stiffness of Zirconia Top Coats in Plasma-Sprayed TBCs, Acta Materialia, pp.49-1565, 2001.

M. Meier, D. M. Nissley, K. D. Sheffler, and T. A. Cruse, Thermal Barrier Coating Life Prediction Model Development, Thermal Barrier Coating Life Prediction Model Development, pp.258-263, 1992.
DOI : 10.1115/1.2906581

A. Johnson, J. A. Ruud, R. Bruce, and D. Wortman, Relationships between residual stress, microstructure and mechanical properties of electron beam???physical vapor deposition thermal barrier coatings, Surface and Coatings Technology, vol.108, issue.109, pp.108-109, 1998.
DOI : 10.1016/S0257-8972(98)00668-9

Y. Guo and . Kagawa, Effect of thermal exposure on hardness and Young's modulus of EB-PVD yttria-partially-stabilized zirconia thermal barrier coatings, Ceramics International, vol.32, issue.3, pp.3-263, 2006.
DOI : 10.1016/j.ceramint.2005.01.018

F. Galerie, E. Toscan, K. N-'dah, Y. Przybylski, M. Wouters et al., Measuring Adhesion of Cr 2 O 3 ans Al 2 O 3 Scales on Fe-Based Alloys, Materials Science Forum, pp.461-464, 2004.

T. Spitsberg, D. R. Mumm, and A. Evans, On the failure mechanisms of thermal barrier coatings with diffusion aluminide bond coatings, Materials Science and Engineering: A, vol.394, issue.1-2, pp.394-176, 2005.
DOI : 10.1016/j.msea.2004.11.038

R. Begley, D. R. Mumm, A. G. Evans, and J. W. Hutchinson, Analysis of a wedge impression test for measuring the interface toughness between films/coatings and ductile substrates, Acta Materialia, vol.48, issue.12, pp.48-3211, 2000.
DOI : 10.1016/S1359-6454(00)00108-7

G. Delette, J. Huchet, and . Laurencin, Etude des sollicitations mécaniques aux interfaces d'un empilement de couches minces Application à la mesure d'adhérence par la technique de flexion 4 points, 2007.

E. Gell, K. Jordan, K. Vaidyanathan, B. Mccarron, Y. Barber et al., Bond Stress and Spallation Mechanisms of Thermal Barrier Coatings, Surface and Coatings Technology, pp.120-121, 1999.

W. Hutchinson and A. G. Evans, On the delamination of thermal barrier coatings in a thermal gradient, Surface and Coatings Technology, vol.149, issue.2-3, pp.179-184, 2002.
DOI : 10.1016/S0257-8972(01)01451-7

C. Faulhaber, M. Mercer, J. W. Moon, A. G. Hutchinson, and . Evans, Buckling delamination in compressed multilayers on curved substrates with accompanying ridge cracks, Journal of the Mechanics and Physics of Solids, vol.54, issue.5, pp.54-1004, 2006.
DOI : 10.1016/j.jmps.2005.11.005

S. Balint, T. Xu, J. W. Hutchinson, and A. G. Evans, Influence of bond coat thickness on the cyclic rumpling of thermally grown oxides, Acta Materialia, vol.54, issue.7, pp.54-1815, 2006.
DOI : 10.1016/j.actamat.2005.12.008

J. Wang and A. G. Evans, Measurement and analysis of buckling and buckle propagation in compressed oxide layers on superalloy substrates, Acta Materialia, vol.46, issue.14, pp.14-4993, 1998.
DOI : 10.1016/S1359-6454(98)00172-4

J. Wang and A. G. Evans, Effects of strain cycling on buckling, cracking and spalling of a thermally grown alumina on a nickel-based bond coat, Acta Materialia, vol.47, issue.2, pp.2-699, 1999.
DOI : 10.1016/S1359-6454(98)00328-0

T. Lang and . Narita, Improvement in Oxidation Resistance of a Ni 3 Al-Based Superalloy IC6 by Rhenium-Based Diffusion Barrier Coatings, Intermetallics, vol.15, pp.4-599, 2007.

K. Z. Narita, L. Thosin, S. Fengqun, H. Hayashi, B. Murakami et al., Development of Re-based diffusion barrier coatings on nickel based superalloys, Materials and Corrosion, vol.60, issue.12, pp.12-923, 2005.
DOI : 10.1002/maco.200503924

M. Prévost, Etude de nouvelles céramiques pour barrières thermiques, Thèse de Doctorat de l'Université Pierre et Marie Curie, 2007.