J. Wright, S. Kim, J. Mcmains, C. H. Smith, and . Séquin, CyberCut : An Internet-based CAD/CAM System, Journal of Computing and Information Science in Enginnering, vol.1, issue.1, pp.52-59, 2001.

B. T. Altan, Y. C. Lilly, and . Yen, Manufacturing of Dies ans Molds, Annals of the CIRP, Keynote Papers, vol.2, pp.104-115, 2001.

A. and ]. B. Anselmetti, Génération automatique de gammes de tournage et contribution à la gestion d'une cellule de production, Mémoire d'habilitation à diriger des recherches, 1994.

R. Baptista and J. , Three and five axes milling of sculptured surfaces, Etude du frottement et de l'usure d'acier à outils de travail à chaud, pp.398-403, 2000.
DOI : 10.1016/S0924-0136(99)00479-3

. A. Bernard, Usinage tridimensionnel d'outillage de topologie complexe : analyse des contraintes de production et contribution à l'optimisation du processus d'usinage, 1989.

W. F. Berg, J. S. Bronsvoort, and . Vergeest, Freeform feature modelling: concepts and prospects, Computers in Industry, vol.49, issue.2, pp.217-233, 2002.
DOI : 10.1016/S0166-3615(02)00080-5

P. Bouzakis, K. Aichouh, and . Efstathiou, Determination of the chip geometry, cutting force and roughness in free form surfaces finishing milling, with ball end tools, International Journal of Machine Tools and Manufacture, vol.43, issue.5, pp.499-514, 2003.
DOI : 10.1016/S0890-6955(02)00265-1

S. S. Bosheh and P. T. Mativega, White layer formation in hard turning of H13 tool steel at high cutting speeds using CBN tooling, International Journal of Machine Tools and Manufacture, vol.46, issue.2, pp.225-233, 1998.
DOI : 10.1016/j.ijmachtools.2005.04.009

. B. Che-05-]-j.-s, Y. 6. Chen, M. Huang, and . Chen, Feedrate optimization and tool profile modification for high-efficiency ball-end milling process, International Journal of Machine Tools & Manufacture, vol.45, pp.1070-1076, 2005.

H. Yau, A new approach to z-level contour machining of triangulated surface models using fillet end mills, Computer-Aided Design, vol.37, pp.1039-1051, 2005.

S. Ding, M. A. Mannan, A. N. Poo, D. C. Yang, Z. Han et al., Adaptive iso-planar tool path generation for machining of free-form surfaces, Thèse de doctorat, CRAN -Université Henri Poincaré Nancy-I, 2005. [DIN 03], pp.141-153, 2003.
DOI : 10.1016/S0010-4485(02)00048-9

]. E. Doe-00, R. Doege, and . Bohnsack, Closed die technologies for hot forging, Journal of Materials Processing Technology, vol.98, pp.165-170, 2000.

S. D. Dragomatz and . Mann, A classified bibliography of literature on NC milling path generation, Computer-Aided Design, vol.29, issue.3, pp.239-247, 1997.
DOI : 10.1016/S0010-4485(96)00060-7

]. E. Duc, Y. Landon, and F. Geiskopf, Usinage à Grande Vitesse, Mémoire Bibliographique, LURPA -Ens Cachan, décembre 1999. [DUG 02] A. Dugas, Simulation d'usinage de formes complexes, Thèse de doctorat, 2002.

P. Fallböhmer, C. A. Rodriguez, T. Özel, and T. Altan, High-speed machining of cast iron and alloy steels for die and mold manufacturing, Journal of Materials Processing Technology, vol.98, issue.1, pp.104-115, 2000.
DOI : 10.1016/S0924-0136(99)00311-8

R. R. Gadh and . Sonthi, Geometric shape abstractions for internet-based virtual prototyping, Computer-Aided Design, vol.30, issue.6, pp.473-486, 1998.
DOI : 10.1016/S0010-4485(97)00099-7

J. Gao, D. Zheng, and N. Gindy, Mathematical representation of feature conversion for CAD/CAM system integration, Robotics and Computer-Integrated Manufacturing, vol.20, issue.5, pp.457-467, 2004.
DOI : 10.1016/j.rcim.2004.05.001

J. Gao, D. Zheng, and N. Gindy, Extraction of machining features for CAD/CAM integration, The International Journal of Advanced Manufacturing Technology, vol.7, issue.7-8, pp.573-581, 2004.
DOI : 10.1007/s00170-003-1882-9

]. P. Gil-07, F. Gilles, W. Monies, and . Rubio, Optimum orientation of a torus milling cutter: Method to balance the transversal cutting force Article in press, International Journal of Machine Tools & Manufacture, 2007.

J. G. Glaeser, H. Wallner, and . Pottmann, Collision-free 3-axis milling and selection of cutting tools, Computer-Aided Design, vol.31, issue.3, pp.225-232, 1999.
DOI : 10.1016/S0010-4485(99)00018-4

F. Gonzalez and P. Rosado, General information model for representing machining features in CAPP systems, International Journal of Production Research, vol.39, issue.9, pp.1815-1842, 2004.
DOI : 10.1080/002075499189727

R. P. Gupta, J. Janardan, T. Majhi, and . Woo, Efficient geometric algorithms for workpiece orientation in 4- and 5-axis NC machining, Computer-Aided Design, vol.28, issue.8, pp.577-587, 1996.
DOI : 10.1016/0010-4485(95)00071-2

R. Harik, W. Derigent, and G. Ris, Automating the flank milling process for planar surfaces, 6th International Conference on Integrated Design and Manufacturing in Mechanical Engineering, IDMME'06, pp.17-19, 2006.

A. L. Helleno and K. Schützer, Investigation of tool path interpolation on the manufacturing of die and molds with HSC technology, Journal of Materials Processing Technology, vol.179, issue.1-3, pp.178-184, 2006.
DOI : 10.1016/j.jmatprotec.2006.03.092

C. S. Im, S. R. Suh, M. C. Lee, J. H. Kim, and M. S. Joun, Computer aided process design in cold-former forging using a forging simulator and a commercial CAD software, Journal of Materials Processing Technology, vol.95, issue.1-3, pp.155-163, 1999.
DOI : 10.1016/S0924-0136(99)00284-8

W. E. Jensen, J. Red, and . Pi, Tool selection for five-axis curvature matched machining, Computer-Aided Design, vol.34, issue.3, pp.251-266, 2002.
DOI : 10.1016/S0010-4485(01)00086-0

K. Cha and Y. Lee, Optimizing tool orientation for 5-axis machining by configuration-space search method, Computer-Aided Design, vol.35, pp.549-566, 2003.

M. C. Kang, K. K. Kim, D. W. Lee, J. S. Kim, and N. K. Kim, Characteristics of Inclined Planes According to the Variations of Cutting Direction in High-Speed Ball-End Milling, The International Journal of Advanced Manufacturing Technology, vol.17, issue.5, pp.323-329, 2001.
DOI : 10.1007/s001700170166

]. B. Kecelj, J. Kopac, Z. Kampus, and K. Kuzman, Speciality of HSC in manufacturing of forging dies, Journal of Materials Processing Technology, vol.157, issue.158, pp.157-158, 2004.
DOI : 10.1016/j.jmatprotec.2004.07.112

. M. Kim-00-]-g, P. J. Kim, C. N. Cho, and . Chu, Cutting force prediction of sculptured surface ball-end milling using Z-map, International Journal of Machine Tools and Manufacture, vol.40, issue.2, pp.277-291, 2000.
DOI : 10.1016/S0890-6955(99)00040-1

. H. Kim-02-]-b, B. K. Kim, and . Choi, Machining efficiency comparison direction-parallel tool path with contour-parallel tool path, Computer-Aided Design, vol.34, issue.2, pp.89-95, 2002.
DOI : 10.1016/S0010-4485(00)00139-1

. J. Ko-01-]-t, H. S. Ko, S. S. Kim, and . Lee, Selection of the Machining Inclination Angle in High-Speed Ball End Milling, International Journal of Advanced Manufacturing Technology, vol.17, issue.3, pp.163-170, 2001.
DOI : 10.1007/PL00003943

P. Krajnik and J. Kopac, Modern machining of die and mold tools, Journal of Materials Processing Technology, vol.157, issue.158, pp.157-158, 2004.
DOI : 10.1016/j.jmatprotec.2004.07.146

D. J. Kulon, P. Mynors, and . Broomhead, A knowledge-based engineering design tool for metal forging, Journal of Materials Processing Technology, vol.177, issue.1-3, pp.331-335, 2006.
DOI : 10.1016/j.jmatprotec.2006.04.062

A. Lamikiz, L. N. Lopez-de-lacalle, J. A. Sanchez, and M. A. Salgado, Cutting force estimation in sculptured surface milling, International Journal of Machine Tools and Manufacture, vol.44, issue.14, pp.1511-1526, 2004.
DOI : 10.1016/j.ijmachtools.2004.05.004

A. Lamikiz, L. N. Lopez-de-lacalle, J. A. Sanchez, and M. A. Salgado, Cutting force integration at the CAM stage in the high-speed milling of complex surfaces, International Journal of Computer Integrated Manufacturing, vol.18, issue.7, pp.7-586, 2005.
DOI : 10.1016/S0007-8506(07)63244-2

S. Lavernhe, Usinage semi-automatique des pièces aéronautiques de structure : Aide au choix de stratégies d'usinage, 2003.

]. T. Lim-00, J. Lim, D. E. Corney, and . Clark, Exact Tool Sizing for Feature Accessibility, The International Journal of Advanced Manufacturing Technology, vol.16, issue.11, pp.791-802, 2000.
DOI : 10.1007/s001700070013

F. Liu, K. Ahmad, M. Yamazaki, L. N. Mori, A. Lopez-de-lacalle et al., Adaptive interpolation scheme for NURBS curves with the integration of machining dynamics Improving the high-speed finishing of forming tools for advanced high-strength steeld (AHSS), MAT 03] P.T. Mativenga, K.K. Hon, A study of cutting forces and surface finish in high-speed machining of AISI H13 tool steel using carbride tools with TiAlN based coatings, Proceedings of the Institution of Mechanical Engineering, pp.433-444, 2003.

K. B. Mawussi, Modèle de représentation et de défintion d'outillages de forme complexe. Application à la génération automatique de processus d'usinage, 1995.

K. Mawussi, S. Lavernhe, and C. Lartigue, Usinage de poches en UGV, p.337, 2004.
URL : https://hal.archives-ouvertes.fr/hal-00373733

F. Monies, Y. Landon, W. Rubio, and J. Redonnet, Détection et corrections des collisions locales et globales pour l'usinage en bout de surfaces gauches, 4th International Conference on Integrated Design and Manufacturing in Mechanical Engineering, IDMME'02, pp.14-16, 2002.

M. Monreal, C. A. Rodriguez, S. C. Park, and B. K. Choi, Influence of tool path strategy on the cycle time of high-speed milling Tool-path planning for direction-parallel area milling Tool-path generation for Z-constant contour machining Usinage à grande vitesse des poches : prise en compte du comportement dynamique de la machine outil dans le calcul de la trajectoire, Computer-Aided Design Computer-Aided Design Computer-Aided Design International Journal of Machine Tools and Manufacture, vol.35, issue.44, pp.395-401, 2000.

W. Rubio, P. Lagrrrigue, G. Dessein, and F. Pastor, Calculation of tool paths for a torus mill on free-form surfaces on five-axis machines with detection and elimination of interference, Analyse aux échelles micro, pp.13-20, 1998.
DOI : 10.1007/BF01179412

J. Senatore, F. Monies, J. Redonnet, and W. Rubior, Improved positioning for side milling of ruled surfaces: Analysis of the rotation axis's influence on machining error, International Journal of Machine Tools and Manufacture, vol.47, issue.6, pp.934-945, 2007.
DOI : 10.1016/j.ijmachtools.2006.07.008

H. Siller, C. A. Rodriguez, H. Ahuett, G. Sun, F. Wang et al., Cycle time prediction in high-speed milling operations for sculptured surface finishing Operation decomposition for freeform surface features in process planning Operation decomposition for freeform surface features in process planning Volumetric feature recognition for machining components, Proceedings of the 1999 ASME design Engineering Technical Conferences, pp.355-362, 1999.

H. Tam, Z. Xu, K. Zhou, Y. Tang, and . Liu, Iso-planar interpolation for the machining of implicit surfaces, Machining strategy choice : performance viewer, 6th International Conference on Integrated Design and Manufacturing in Mechanical Engineering, IDMME'06 paper N°55 (Session B3), 12 p, pp.125-136, 2000.
DOI : 10.1016/S0010-4485(01)00059-8

L. Tapie, B. K. Mawussi, and B. Anselmetti, Circular tests for HSM machine tools: Bore machining application, International Journal of Machine Tools and Manufacture, vol.47, issue.5, pp.805-819, 2007.
DOI : 10.1016/j.ijmachtools.2006.06.021
URL : https://hal.archives-ouvertes.fr/hal-00422388

C. Tournier, C. Castagnetti, S. Lavernhe, and F. Avelland, Tool path generation and postprocessor issues in five-axis high speed machining of hydro turbine blades, The 5th International Conference on High Speed Machining, pp.500-510, 2006.
URL : https://hal.archives-ouvertes.fr/hal-00577235

. P. Urb-00-]-j, P. Urbanski, R. C. Koshy, and D. K. Dewes, High speed machining of moulds and dies for net shape manufacture, Materials and Design, vol.21, pp.395-402, 2000.

J. Vivancos, C. J. Luis, L. Costa, and J. A. Ortiz, Optimal machining parameters selection in high speed milling of hardened steels for injection moulds Surface integrity of die material in high speed hard machining Part 1 : Micrographical analysis, Journal of Materials Processing Technology Journal of manufacturing science and engineering, vol.22, pp.155-156, 2000.

C. H. Yang and Z. Han, Interference detection and optimal tool selection in 3-axis NC machining of free-form surfaces, Computer-Aided Design, vol.31, issue.5, pp.303-315, 1999.
DOI : 10.1016/S0010-4485(99)00031-7

H. Yang, Y. Ding, and . Xiong, Manufacturability Analysis for a Sculptured Surface Using Visibility Cone Computation, The International Journal of Advanced Manufacturing Technology, vol.15, issue.5, pp.317-321, 1999.
DOI : 10.1007/s001700050073

X. Zhang, J. Wang, K. Yamazaki, and M. Mori, A surface based approach to recognition of geometric features for quality freeform surface machining, Computer-Aided Design, vol.36, issue.8, pp.735-744, 2004.
DOI : 10.1016/j.cad.2003.09.002

O. Zirmi, H. Paris, G. Booch, J. Rumbaugh, and I. Jacobson, Modélisation de l'usinabilité des pièces aéronautiques dans un contexte de conception de gamme d'usinage, 9èmè Colloque National AIP PRIMECA The UML reference manual, 1999.

. Analyse-de-la-vitesse-d, avance maximum Pour une vitesse d'avance programmée de 6 m/min et une trajectoire en demi cercle, au niveau du premier arc (10mm), la vitesse d'avance n'est pas atteinte figure 159 et un état stationnaire avec une vitesse d'avance imposée de V f = 5