P. A. De-publications, . Revues, . Avec, . De, N. Perry et al., Knowledge Integration based on Roadmapping and Conceptual Framework Approached to ease Innovation Management Interface between Strategic Management and Knowledge Management, International Journal of Knowledge management, Special Issue on, issue.1, 2007.

N. Perry, D. Preez, N. , A. Candlot, A. Bernard et al., A Roadmapping and Conceptual Framework Based Approach For Efficient Knowledge and Innovation Management, International Journal of Innovation Management, 2007.

M. Mauchand, A. Siadat, N. Perry, and A. Bernard, Proposal for tool-based method of product cost estimation during conceptual design, Journal of Engineering Design, vol.10, issue.2, 2007.
DOI : 10.1007/s001700170074
URL : https://hal.archives-ouvertes.fr/hal-00476631

[. A. Bernard, A. Laroche, F. Ammar-khodja, S. Perry, and N. , Impact of New 3D Numerical Devices and Environments on Redesign and Valorisation of Mechanical Systems, CIRP Annals - Manufacturing Technology, vol.56, issue.1, pp.1-143, 2007.
DOI : 10.1016/j.cirp.2007.05.035
URL : https://hal.archives-ouvertes.fr/hal-00476632

M. Bigand, J. P. Bourey, N. Perry, and M. Mauchand, Integrated Design of Product and Manufacturing Process, Case Studies in Model Integration Emergence of Symbiotic & Collaborative Knowledge Networks: how to reach the future work Standards? Int, pp.951-192, 2007.

N. Perry and W. Uys, Innovation Management based on Knowledge Representation and Integration Knowledge Engineering Systems for Digital Enterprise Performance Improvement, Int. Journal on Decision Support Systems International Journal of Computer Integrated Manufacturing, vol.4343, issue.20, pp.167-9236, 2007.

N. Perry, A. Bernard, and J. Delplace, Concurrent Cost Engineering for decisional and operational process enhancement in a foundry, International Journal of Production Economics, Issue on Concurrent Cost Engineering, vol.109, pp.1-2, 2007.
URL : https://hal.archives-ouvertes.fr/hal-00476635

P. Mévellec and N. Perry, Whole life-cycle costs: a new approach, International Journal of Product Lifecycle Management, vol.1, issue.4, p.4, 2006.
DOI : 10.1504/IJPLM.2006.011058

P. Mognol, D. Lepicart, and N. Perry, Rapid prototyping: energy and environment in the spotlight, Rapid Prototyping Journal, vol.12, issue.1, pp.26-34, 2006.
DOI : 10.1108/13552540610637246
URL : https://hal.archives-ouvertes.fr/hal-00476639

[. A. Candlot, A. , N. Perry, A. Bernard, and S. Ammar-khodja, Deployment of an Innovative Resource Choice Method for Process Planning, CIRP Journal of Manufacturing Systems, vol.35, pp.5-0176, 2006.
URL : https://hal.archives-ouvertes.fr/hal-00476641

M. Mauchand, N. Perry, and A. Bernard, Specification management for the cost constraint optimisation in micro-electronic design, International Journal of Manufacturing Technology and Management, pp.1741-5195, 2006.

N. Du-preez, N. Perry, A. Candlot, A. Bernard, W. Uys et al., Customised high-value document generation, CIRP Annals - Manufacturing Technology, vol.54, issue.1, pp.277-320, 2005.
DOI : 10.1016/S0007-8506(07)60064-X
URL : https://hal.archives-ouvertes.fr/hal-00517233

[. A. Jaekel, F. W. Perry, N. Campos, C. Mertins, K. Chalmeta et al., Interoperability Supported by Enterprise Modelling, Lecture Notes in Computer Science, vol.3762, issue.2, pp.552-562, 2005.
DOI : 10.1007/11575863_74
URL : https://hal.archives-ouvertes.fr/hal-00517235

A. Bernard and N. Perry, Fundamental concepts of product / technology / process informational integration for process modeling and process planning, Int. Journal of Computer Integrated Manufacturing, vol.16, pp.7-8557, 2003.
URL : https://hal.archives-ouvertes.fr/hal-00517236

[. A. Bernard, A. , J. C. Delplace, N. Perry, and S. Gabriel, Integration of CAD and rapid manufacturing for sand casting optimisation, Rapid Prototyping Journal, vol.9, issue.5, pp.327-333, 2003.
DOI : 10.1108/13552540310502220
URL : https://hal.archives-ouvertes.fr/hal-00517237

N. Perry, M. Mauchand, and A. Bernard, Cost models for sand casting : the limits of a generic approach, International Journal of CAD-CAM and Computer Graphics, vol.18, pp.3351-366, 2003.
URL : https://hal.archives-ouvertes.fr/hal-00517238

[. A. Perry, N. , S. Marya, and E. Soutif, Enhanced Weld Penetrations in Titanium during GTA and Laser Welding through Flux Applications Titanium'99: Science and Technology, IIW IX 2040-02 Copenhage discussion B. REVUE NATIONALE AVEC COMITE DE LECTURE, pp.1746-1753, 2000.

N. Perry, M. Mauchand, A. Bernard, . Livres, and . Ouvrages-de-synthese-[-c, Modèles de coûts en fonderie sable : les limites d'une approche générique, Revue Internationale de CFAO et d'informatique graphique Vol 18 -n°3 Knowledge networks, methods and tools analysis for information validity: case study feed back, pp.351-366, 2003.

A. Candlot, N. Perry, and A. Bernard, Methods to capitalise and reuse K in process planning, 2007.

N. Perry, S. Ammar-khodja, A. Candlot, and A. Bernard, Approche méthodologique pour la maîtrise du cycle de vie des connaissances ? Application aux outils de KBE, Chp. 18 de Ingénierie de la conception et cycle de vie des produits, 2006.

N. Perry, M. Mauchand, and A. Bernard, Integration of Cost Models in Design and ManufacturingAdvances in Design, Springer Series in Advanced Manufacturing, pp.315-325, 2006.

N. Perry, M. Mauchand, A. Bernard-labrousse, M. , N. Perry et al., Costs Models In Design And Manufacturing Of Sand Casting Products Advances in Integrated Design and Manufacturing in Mechanical Engineering, Modèle FBS-PPR : des objets d'entreprise à la gestion dynamique des connaissances industrielles, Chp. 6 in Gestion Dynamique des Connaissances Industrielles, 2004.

A. Bernard, N. Perry, J. C. Delplace, and S. Gabriel, Quotation for the value added assessment during product development and production processes, Methods and Tools for Co-Operative and Integrated Design, pp.35-43, 2004.

N. Perry and A. Bernard, Cost objective PLM and CE, Concurrent Engineering 2003: the Vision for the Future Generation in Research and Applications Title Volume 1 -Enhanced interoperable systems, J. Cha et al, pp.817-822, 2003.

N. Perry and A. Bernard, Rapid product development methodology and technologies for performance improvement in foundry industry, COMA'07, Proc. Of the International Conference on Competitive Manufacturing, pp.171-180, 2007.

C. Campos, N. Perry, V. Anaya, F. W. Jaekel, S. Ammar-khodja et al., Interoperability Supported by Enterprise Modelling. A Study into Current Practices in Enterprises, Interoperability for Enterprise Software and Applications I-ESA'07, Portugal Software Engineering and Knowledge Engineering: form competition to cooperation, Cirp Design Seminar, Knowledge Management oriented integration traceability: Experience feedback from a manufacturing system development, CIRP International Manufacturing Systems Seminar, 2007.
URL : https://hal.archives-ouvertes.fr/hal-00517235

M. Mauchand, A. Siadat, N. Perry, and A. Bernard, Manufacturing system performance analysis based on value chain modelling and simulation, CIRP International Manufacturing Systems Seminar, 2007.

M. Mauchand, A. Bernard, A. Siadat, and N. Perry, Enterprise processes performance analysis ? An approach based on value chain modeling and simulation, International Conference on Changeable, Agile, Reconfigurable and Virtual Production, 2006.

M. Mauchand, A. Siadat, J. Y. Dantan, N. Perry-mauchand, M. et al., A Proposal For Decision-Making System Aiming To Support Cost Estimation During The Preliminary Design, Proceeding of IDMME'06, Grenoble. [D Proposal for Tool-based Method of product Cost Estimation during Conceptual Design Knowledge Engineering Systems for Digital Enterprise Performance Improvement Knowledge Capitalization process to Support KBE systems development, Proceedings of Virtual Concept 2006: Product Life cycle and Engineering Design Management, 2006.

A. Bernard, N. Perry, J. Perry, A. B. Bernard, A. et al., Concurrent Cost Engineering for decisional and operational process enhancement, Concurrent Engineering Specification management for the cost constraint optimisation in micro-electronic design Computer-Aided- Production engineering for decisional and operational process enhancement in foundry Interoperability Supported by Enterprise Modelling; On the Move to Meaning-full Internet Systems, 3rd International Conference on Manufacturing Research ICMR, Cranfield University, UK. [D.2005.6] LC universal model for the enterprise information system structure, 12th CIRP LCE Seminar proceedings, Grenoble. [D.2005.8] Jaekel F Proceedings Editors: Robert Meersman Cost Management in Sand Casting Foundry through a PLM CAD Integration, COMA'04, International Conference on Competitive Manufacturing, pp.163-168, 2004.

N. Perry, M. Mauchand, and A. Bernard, Costs Models in Design and Manufacturing of Sand Casting Products, Proceedings of IDMME'2004 conference, 2004.
DOI : 10.1007/1-4020-3482-2_6
URL : https://hal.archives-ouvertes.fr/hal-00540013

A. Bernard, N. Perry, J. Delplace, and S. Gabriel, Quotation for the value added assessment during product development and production processes Activity-Based Decision and Control at an Enterprise Level, Proc. of 2003 CIRP Design Seminar, Grenoble. [D.2003.2] 4th International Conference on Industrial Automation, pp.2-9802946, 2003.

N. Perry, A. Bernard, J. C. Delplace, and S. Gabriel, Digital mock-up: base of steel casting process improvement, International Even Conference: Virtual Engineering Applications for Design and Product Development, Costs as Strategic-Tactic-Operational Criteria for Enterprise Processes Definition and Control, 5th International Industrial Engineering Conference, 2003.

G. Rückert, N. Perry, S. Marya, E. G. Lütjering, and J. Albrecht, Investigations on arc welding of titanium and its alloys, World Conference on Titanium, vol.2, pp.721-727, 2003.

K. Bernard, A. , N. Perry, J. C. Delplace, S. Gabriel-perry et al., Optimization of complete design process for sand casting foundry, Proceedings of IDMME'2002 conference Enhanced Weld Penetrations in Titanium during GTA and Laser Welding through Flux Applications, Proc. of 9-th World Conference on Titanium, Central Research Institute of Structural Materials " Prometey, pp.1746-1753, 1999.

N. Perry, S. Marya, and E. Soutif, New Perspectives of Flux assisted GTA Welding in Titanium Structures, Reactive Metals in Corrosive Applications Conference Proceedings, Jack Tosdale Editor, pp.55-62, 1999.

L. Cretteur, N. Perry, and S. K. Marya, Development of actives flux for superior GTA and Laser Welds, MATEHN'98, Romanian 2nd International Conference On Materials And Manufacturing Technologies, pp.927-933, 1998.

N. Perry, S. Marya, E. Soutifx, E. Conferences, . Avec et al., Study and Development of Flux Enhanced GTA Penetrations in a Commercial Grade Titanium, ASM 98 Trends in Welding Research Réflexion sur une approche systématique pour créer des structures de consolidation de l'information Intégration Outil-Séquence-Entité pour l'aide à la génération des processus d'usinage, CFM'05, Troyes, Proceedings of the 5th Int. Conf., Pine Mountain 9ème Colloque National AIP PRIMECA, La Plagne. [E.2005.2] Soudage ATIG, évolution des réalisations mécano soudées de fortes épaisseurs, pp.520-525, 1998.

C. En, U. , C. Perry, N. , A. Bernard et al., High-value document generation: an ontology based methodology proposal, 17th Conference on Advanced Information Systems Engineering, -CAiSE'05 -Enterprise Models and Ontology for Interoperability Virtual Engineering Team for the Industrial Engineering, 16th International Conference on Advanced Information Systems Engineering, CAISE'04 -Enterprise Models and Ontology for Interoperability, pp.359-362, 2004.

G. Publications, . Et, . De-projets-[-g, N. Walter, C. Perry et al., INTEROP Delivrable D5.2 : Description of objectives, requirements and scenarios for synchronisation of different distributed enterprise models including benefits and gaps, 2005.

H. Protection-industrielle-marya, S. K. , and N. Perry, Dépôt d'une enveloppe SOLEAU à l'INPI le 20 Novembre 1997. Numéro d'enregistrement : 78328, 1997.

. Ce-thème-d, Vergara (bourse Franco ? Mexicaine débutée en Avril 2006) sur les aspects d'impact des structures organisationnelles sur les coûts des produits. L'évaluation de l'intégration verticale appliquée aux structures de production dans le domaine de la mécanique permet d'aider à répondre aux questions de faire ou d'acheter. Ce travail s'appuie sur des expériences fortes dans le cadre de sous-traitance automobile. L'évaluation économique se

. Le-rayonnement-scientifique-de-ce-travail-s-'est-fait-au-travers-de, 7 revues internationales [A, revue nationale [B.2003.1], 4 contributions à des ouvrages collectifs [C.2006.2] [C.2005.2], 2003.

P. Alberti, Capitalisation des compétences et des connaissances favorisant l'innovation, thèse de doctorat, 2004.

C. Alcouffe and M. P. Bes, Standardisation et évaluation des activités de conception dans le secteur aérospatial, Deuxième Congrès International Franco-Québécois de Génie Industriel -ALBI, 1997.

H. Amara, Contribution à la génération de gammes d'usinage : intégration de l'homme et approche multi-agents, 2003.

D. M. Amidon, The Innovation Super Highway: Harnessing Intellectual Capital for Sustainable Collaborative Advantage, published by Butterworth Heinemann, pp.0-7506, 2003.

D. M. Amidon, In: Innovation Strategy for the Knowledge Economy-The Ken Awakening, published by Butterworth Heinemann, 2001.

D. Amidon, Collaborative Innovation and the Knowledge Economy, published by the Society of Management Accountants of Canada, 1998.

S. Ammar-khodja, A. Candlot, and A. Bernard, Confrontation de la méthodologie MOKA à une expérience de développement d'outil KBE dans l'industrie aéronautique, 6eme congrès international de Génie Industriel, Déploiement d'une démarche de Knowledge Management dans le cadre d'un projet de spécification d'un outil KBE, Conception et Production Intégrée : CPI'2005, 2005.

S. L. Ansari and J. E. Bell, and The CAM-I Target Cost Core Group (1997), Target Costing, The Next Frontier in Strategic Cost Management

M. C. Andrade, P. Filho, R. C. Espozel, A. M. Maia, L. O. Qassim et al., Activitybased costing for production learning, Int.J. Production Economics, vol.62, pp.3175-180, 1999.

Y. Asiedu, Product life cycle cost analysis: State of the art review, International Journal of Production Research, vol.36, issue.4, pp.4883-908, 1998.
DOI : 10.1080/002075498193444

J. Avery, Information Theory and Evolution, World Scientific, 2003.

B. E. Avoine, La pratique des coûts dans les projets industriels : Le cost Control de l'estimation à la détermination du contrat ? AFNOR -nov, 1998.

R. Bachelet, B. Bachimont, A. Isaac, A. , R. Troncy et al., DESI: Méthode d'évaluation de l'impact économique des choix techniques, http://www.ig2i.fr/rb/recherche/Communication_AFC_94/afc_cout.html, Arts et sciences du numérique : Ingénierie des connaissances et critique de la raison computationnelle Semantic Commitment for Designing Ontologies: A Tool Proposal, 13th International Conference on Knowledge Engineering and Knowledge Management, 1994.

F. Bakema, A review of literature on knowledge management, 1999.

F. Barthelme-trapp, Une approche constructiviste des connaissances : contribution à la gestion dynamique des connaissances, Thèse, Université des Sciences Sociales, 2003.

S. Baumann, M. Malburg, M. Auf-'m-hofe, H. Wenzel, and C. , From Paper to a Corporate Memory ? A First Step, 21st Annual German Conference on AI : KI'97 Knowledge management: strategy or software?, Management and Decision Journal, vol.38, issue.9, pp.25-1747, 1997.

. Bec, A. J. Beckett, C. E. Wainwright, and D. Bance, Implementing an industrial continuous improvement system: a knowledge management case study, Industrial Management & Data Systems Journal, vol.100, pp.7-330, 2000.

F. Belkadi, E. Bonjour, and M. Dulmet, Modelling Framework of a Traceability System to Improve Knowledge Sharing and Collaborative Design, Computer Supported Cooperative Work in Design II Lecture Notes in Computer Science, vol.3865, 2005.
DOI : 10.1007/11686699_36

F. Belkadi, E. Bonjour, and M. Dulmet, D??marche de mod??lisation d'une situation de conception collaborative, Document num??rique, vol.8, issue.1, pp.93-106, 2004.
DOI : 10.3166/dn.8.1.93-106

S. Bellut, Estimer le coût d'un projet, 2002.

B. Younes, J. Berrah, L. Bernard, A. , M. Labrousse et al., Numerical reference system for motorcycle development: proposition of a base conceptual model, CIRP Design Seminar, Modélisation des Ressources en Fabrication mécanique Improvement of design efficiency by using fabricability criteria through e-design cognitive agents, CIRP Design Seminar, 1994.

C. Berliner and J. A. Brimson, Cost management for Today's Advanced Manufacturing, the CAM-I Conceptual Design Contribution à la modélisation des produits et à l'intégration des technologies productrices dans un environnement multi acteurs, 1988.

M. P. Bes, M. Bigand, and O. Korbaa, Intégration de modèles pour l'ingénièrie des systèmes de conception, Mémoire d'habilitation à diriger des recherches, Comment Gérer la Capitalisation des Connaissances ?, Actes du 3ème Congrès International de Génie Industriel CIGI'99 Mai 1999. [Big 05a] Bigand M. (2005) Traçabilité des justifications des décisions en conception de produit, 6ème Congrès International de Génie Industriel, pp.471-481, 1999.

M. Bigand, D. N-'diaye, D. Corbeel, and J. P. Bourey, Contribution to viewpoint modeling using an object approach in an information system for production engineering, Proceedings of Second World Manufacturing Congress ISMS. Durham, pp.246-251, 1999.

J. Bode and R. Fung, Cost engineering with quality function deployment, Computers & Industrial Engineering, vol.35, issue.3-4, pp.587-590, 1998.
DOI : 10.1016/S0360-8352(98)00165-X

V. Boly, J. Renaud, V. Rault-jacquot, C. Boudjlida, N. et al., Intégration de la variable organisationnelle en gestion de projets innovants et en ingénierie concourant, Revue Internationale de Gestion et de Management de Projets, Interop Delivrable 8.1 : State of the art and state of the practice including initial possible research orientations, 2002.

T. Boudouh, D. Anghel, and O. Garro, Design iterations in a geographically distributed design process, in Advances in Design, pp.377-386, 2006.

C. Bourne, Catégorisation et formalisation des connaissances industrielles, dans Connaissances et Savoir-faire en entreprise, pp.179-197, 1997.

E. Brinke, D. Lutters, A. H. Streppel, and H. J. Kals, Variant-based cost estimation based on Information Management, 15th Int. Conf. Prod: Res, pp.1383-1386, 2002.
DOI : 10.1080/00207540050205235

D. Brissaud and S. Tichkiewitch, Product models for life-cycle, Annals of the CIRP, pp.105-108, 2001.

D. Brissaud and S. Tichkiewitch, Innovation and manufacturability analysis in an integrated design context, Computers in Industry, pp.111-121, 2000.

D. Brissaud and H. Paris, Co-operation in design: indicators as supports for the discussion between product and process engineers Integration of process knowledge into design support systems, pp.181-188, 1999.

D. Brissaud, Conception Automatique de Gamme d'Usinage: Point de vue Expertise, Gamme Automatique d, 1990.

J. P. Brodier, La dictature des prix de revient, Harvard -L'Expansion, 1990.

E. T. Brinke, E. Lutters, T. Streppel, and H. Kals, Cost estimation architecture for integrated cost control based on information management, International Journal of Computer Integrated Manufacturing, vol.17, issue.6, pp.534-545, 2004.
DOI : 10.1007/BF01350820

E. Ten-brinke, Costing Support and Cost Control in Manufacturing: A Cost Estimation Tool Applied in the Sheet Metal, 2004.

E. Caillaud, B. Et, and . Duprieu, Ingénierie des connaissances pour l'ingénierie intégrée : application à la conception d'outillages, Revue Internationale d'Ingénierie des Systèmes de Production Mécanique, pp.60-66, 2003.

M. Callot, K. Oldham, M. Stokes, N. Godwin, R. Brimble et al., Methodology and tools oriented to knowledge based engineering applications Rapport public 2.0. [Can 06] Candlot A Principes d'assistance à la maîtrise d'ouvrage pour la consolidation et l'intégration d'expertise, Thèse de doctorat, Ecole Centrale de Nantes Synergy and Knowledge in an Innovative Project between Academia and Industry, COMA'04, International Conference on Competitive Manufacturing, pp.457-461, 1998.

O. Cantzler, Une architecture conceptuelle pour la pérennisation d'historiques globaux de conception de produits industriels complexes, 1997.

V. Capponi, Les interactions homme-machine dans la génération assistée de gammes d'usinage ? Application aux pièces aéronautiques de structure, Thèse de Doctorat, 2005.

B. Cassin, Vocabulaire Européen des Philosophies Etude des dysfonctionnements dans la prise de décision, Le Cardinal J, 2000.

J. Caussanel and E. Chouraqui, Information et Connaissances : quelles implications pour les projets de Capitalisation des Connaissances, in: Revue Document numérique -Gestion des documents et Gestion des connaissances, Difficultés de nouvelles approches de conception dans le spatial, séminaire GSIP, Méthodes et outils pour la conduite de projet, pp.101-119, 1991.

V. Cliville, Approche systémique et méthode multicritères pour la définition d'un système d'indicateurs de performance, Thèse de doctorat, 2004.

M. Cherif, Modélisation générique des efforts de coupe en fraisage pour la CFAO et la surveillance d'usinage, Thèse de Doctorat, 2003.

S. Chwen, M. H. Chen, and S. Kovar, Integrating ABC and TOC for better manufacturing decision making', Integrated Manufacturing Systems, pp.433-441, 2003.

R. Cooper and R. Slagmulder, Target Costing and Value Engineering, Institute of Management Accountants, Entreprise et Compétences : le sens des évolutions », Evolution du travail face aux mutations technologiques, 1997.

E. Cuesta, J. Rico, S. Mateos, and M. Suarez, Times and costs analysis for sheet-metal cutting processes in an integrated CAD/CAM system, International Journal of Production Research, vol.36, issue.6, pp.1733-1747, 1998.
DOI : 10.1080/002075498193255

S. J. Culley and C. A. Mcmahon, Perspectives on Knowledge management in Design, In Engineering Design -Theory and Practice, 2005.

A. B. Czyzewski and R. P. Hull, Improving profitability With Life Cycle Costing, Journal of Cost management, pp.20-27, 1991.

M. Dassisti and L. M. Galantucci, Product cost estimating and uncertainties in production management: an unified framework, Proceedings of The 33rd CIRP Int. seminar on manufacturing systems, pp.346-401, 2000.

M. Dassisti, L. M. Galantucci, F. Faccio, A. Indelli-london, E. B. Dean et al., Design Criteria for implementing a Decision Support System for Cost EstimationSupply Strategies: Concepts and practice at the leading edge, Proceedings of IPSERA 7th International Annual Conference Parametric Cost Deployment The Design-To-Cost Manifold, International Academy of Astronautics Symposium on Space Systems Cost Methodologies and Applications San Diego California U.S.A, 1990.

J. C. Delplace, Ingénierie numérique pour l'amélioration des processus décisionnels et opérationnels en fonderie, 2004.

D. Deneux, O. Senechal, F. Tomala, and M. Lawson, Towards a methodology for estimating the global impacts of innovative design scenarii, From Knowledge intensive CAD to knowledge intensive engineering, pp.237-248, 2002.
DOI : 10.1007/978-0-387-35494-1_18

W. Derigent, Méthodologie de passage d'un modèle CAO vers un modèle FAO pour des pièces aéronautiques : Prototype logiciel dans le cadre du projet USIQUISK, 2005.

W. Derigent, R. Harik, M. Lombard, G. Ris, R. Dieng et al., Intégration conception/génération automatique de gammes en conception intégrée à partir de connaissances métiers Dunod : Série Stratégies et systémes d'information, 2ème Colloque du groupe de travail C2EI : Modélisation et pilotage de systèmes de Connaissances et de Compétences dans les Entreprises Industrielles :« Intégration des Connaissances et Compétences en vue de l Méthodes et outils pour la gestion des connaissances Methods and Tools for Corporate Knowledge Management, proceedings KAW'98 GIM/GRAI integrated methodology for product development, Design for X, Concurrent engineering imperatives, 1996.

G. Dragoi and D. Brissaud, A Methodology for Cost and Quality Optimisation in a design system by linking quality methods, Integrated Design and Manufacturing in Mechanical Engineering, Proceedings of the 3rd IDMME Conference Held in Montreal, Canada, pp.1402009798-3339, 2000.

G. Dragoi, D. Brissaud, and S. Tichkiewitch, Analyse of the manufacturability cost and quality at the product design stage, Revisa romana de mecanica fina si otpica, pp.2543-547, 1998.

Y. Ducq, B. Vallespir-dugas, A. P. Girard, P. Eynard, B. Merle et al., Definition and aggregation of a performance measurement system in three aeronautical workshops using the ECOGRAI method, Proposition pour un système d'évaluation de la performance technico-économique en ingénierie des produits. Proceedings of the 3rd International industrial conference, pp.163-177, 1999.
DOI : 10.1016/S0360-8352(97)00002-8

B. D. Edwin, NASA, Parametric cost deployment, World Wide Web, http://akao.larc.nasa.gov/dfc Modélisation et simulation de chaînes de valeurs en entreprise : une approche dynamique des systèmes et aide à la décision : SimulValor, Elh 05]M. Elhamdi (2005) Thèse de doctorat, spécialité Génie Industriel, 1995.

J. L. Ermine, La gestion des connaissances, 2003.
URL : https://hal.archives-ouvertes.fr/hal-00997696

J. L. Ermine, H. Briand, F. Guillet, J. L. Chaillot, and M. , Les processus de la gestion des connaissances, Extraction et gestion des connaissances MKSM : Méthode pour la gestion des connaissances, Ingénierie des systèmes d'information, pp.541-575, 1996.

A. M. Esawi and M. F. Ashby, Cost estimates to guide pre-selection of processes Cost-based ranking for manufacturing process selection, Materials & Design n°24 Integrated Design and Manufacturing in Mechanical Engineering, pp.605-616, 2000.

A. M. Esawi and M. F. Ashby, Cost estimation for process selection, ASME Design for Manufacture Conference (DETC99), 1999.

B. Eynard, M. Lombard, N. Matta, J. R. Fabrycky, W. J. et al., Gestion dynamique des connaissances industrielles (Traité IC2, série Informatique et systèmes d'information), Hermes ed°, ISBN 2746209527. [Fab 91] Life-Cycle Cost and Economic Analysis Use of Parametric Models in an Economic Evaluation Step During the Design Phase, p.279, 1991.

J. M. Firestone, Enterprise Knowledge Portals: What They Are and What They Do, Knowledge and Innovation Développement de modèles spécifiques de gestion des connaissances dans les services de recherche Thèse en Génie Industriel, Journal of the KMCI Furet B, vol.1, issue.1, 2000.

F. Gautier and V. Giard, Vers une meilleure ma??trise des co??ts engag??s sur le cycle de vie, lors de la conception de produits nouveaux, Comptabilit?? - Contr??le - Audit, vol.6, issue.2, pp.43-75, 2000.
DOI : 10.3917/cca.062.0043

M. Gardoni, Maîtrise de l'information non structurée et capitalisation de savoir et savoirfaire en Ingénierie Intégrée, Cas d'étude Aérospatiale, 1999.

F. Geiskopf, V. Goepp, F. Kiefer, and E. Caillaud, Conception préliminaire de systèmes de production : cycle d'abstraction et vue problème Application aux systèmes d'information de production et aux systèmes usinant, Ingénierie de la conception et cycle de vie des produits, pp.257-274, 2006.

F. Gillot, N. Giannopoulos, R. Roy, V. Taratoukhine, and A. Sarasua-echeverria, Elaboration d'une méthodologie de fabrication d'outillages prototypes, Thèse de doctorat, Ecole Centrale de Nantes. Embedded systems software cost estimating within the concurrent engineering environment, CE03: the Vision for the Future Generation in Research and Applications, pp.352-357, 2003.

G. Giannopoulos, N. , V. Taratoukhine, and R. Roy, Advances In Manufacturing Technology XVII, Qin & N.P. Juster, pp.461-466, 2003.

V. Giard, Ingénierie des services, dans La chaîne de valeur : un concept démodé ?, sous la direction de Pierre Baranger, pp.2-7535, 2005.

G. Giard, V. , and F. Gautier, Vers une meilleure maîtrise des coûts engagés sur le cycle de vie, lors de la conception de produits nouveaux, publié dans Comptabilité, Contrôle, Audit, revue de l'Association Francophone de Comptabilité, pp.43-75, 2000.

G. Giard and V. , Economical analysis of product standardization, IFAC/IFIP/IEEE 2nd Conf on Management and Control of Production and Logistic Les bases d'une évaluation économique de l'ordonnancement en ateliers spécialisés, Revue Française de Gestion industrielle, pp.73-93, 1993.

G. Giard, V. , C. Girard, and V. , Le pilotage économique des projets, Revue internationale en gestion et management de projets, n° 2, Gestion de projets, 1991.

V. Giard, Gestion de production: évaluation économique et prise de décision, Revue Française de Gestion, Janvier-Février, pp.13-28, 1988.

P. Girard, Contribution à la conduite de conception, Mémoire d'habilitation à diriger des recherches, 2004.

M. Gosselin and P. Mévellec, Plaidoyer pour la prise en compte des paramètres de conception dans la recherche sur les innovations en comptabilité de gestion, 24ème Congrès de l'Association Francophone de Comptabilité Development of a cladogram of cost management systems, Mévellec, 2003.

L. Gratton, Living Strategy, 2000.
DOI : 10.1002/9780470172223.ch49

T. R. Gruber, Toward principles for the design of ontologies used for knowledge sharing?, International Journal of Human-Computer Studies, vol.43, issue.5-6, 1995.
DOI : 10.1006/ijhc.1995.1081

T. R. Gruber, A translation approach to portable ontology specifications, Knowledge Acquisition, vol.5, issue.2, pp.199-220, 1993.
DOI : 10.1006/knac.1993.1008
URL : http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.101.7493

T. R. Gruber, . Stanford, and U. California, Ontolingua: A Mechanism to Support Portable Ontologies Towards a knowledge repository for collaborative design process: focus on conflict management Special issue: Objectoriented modelling in design and production, Computers in Industry, vol.55, issue.3, pp.335-350, 1992.

R. Harik, W. Derigent, M. Lombard, and G. Ris, Product model adjustment methodology so as to support its PLM cycle, 4ème Conférence Internationale de Conception et Production Intégrées (CPI'2005), 2005.
URL : https://hal.archives-ouvertes.fr/hal-00121071

O. Hilmola, Theory of constraints and outsourcing decisions, International Journal of Manufacturing Technology and Management, vol.3, issue.6, pp.517-527, 2001.
DOI : 10.1504/IJMTM.2001.001427

O. Hilmola, ENHANCING SYSTEM-WIDE PROFITABILITY WITH NEW PRODUCT INTRODUCTION AND THROUGHPUT ACCOUNTING, International Journal of Innovation and Technology Management, vol.01, issue.03, pp.289-306, 2004.
DOI : 10.1142/S0219877004000192

O. Hilmola, P. Helo, and M. Holweg, On the outsourcing dynamics in the electronics sector: The evolving role of the original design manufacturer, 2005.

C. W. Holsapple and K. Jones, Exploring primary activities of the knowledge chain, Knowledge and Process Management, vol.11, issue.3, pp.155-174, 2004.
DOI : 10.1002/kpm.200

C. W. Holsapple and M. Sing, The knowledge chain model: activities for competitiveness, Expert Systems with Applications, vol.20, issue.1, pp.77-98, 2001.
DOI : 10.1016/S0957-4174(00)00050-6

C. W. Hoover and J. B. Jones, Improving Engineering Design: Designing for Competitive Advantage Contribution à l'estimation des coûts en production mécanique : l'approche entité-coût appliquée dans un contexte d'ingénierie intégrée, 1991.

J. Innes, F. Mitchell, and D. Sinclair, Activity-based costing in the U.K.???s largest companies: a comparison of 1994 and 1999 survey results, Management Accounting Research, vol.11, issue.3, pp.349-362, 2000.
DOI : 10.1006/mare.2000.0135

A. Jae-hyeon and C. Suk-gwon, Assessing the contribution of knowledge to business performance: the KP3 methodology Special issue: Knowledge management technique, Decision Support Systems journal, vol.36, issue.4, pp.403-4160167, 2004.

A. Jaime, De la gestion de la qualité à la gestion des connaissances dans les projets de recherche : Une approche par la gestion du contenu pour la recherche bibliographique, 2005.

N. K. Jha, Probabilistic cost estimation in advance of production in a computerized manufacturing system through stochastic geometric programming, Computers & Industrial Engineering, vol.30, issue.4, pp.809-821, 1996.
DOI : 10.1016/0360-8352(96)00033-2

K. M. Kadj-hamou, E. Aldanondo, and R. Caillaud-kaplinsky, Spreading the Gains from Globalization: What Can Be Learned from Value-Chain Analysis? Problems of Economic Transition, Configuration de produits et capitalisation de connaissances, Gestion dynamique des connaissances industrielles, pp.335-351, 2004.

R. Kaplinsky and M. Morris, A Handbook for Value Chain Research, IDRC, http://www.ids.ac.uk/ids/global/pdfs/VchNov01.pdf [Kan 03 The relationship between total quality management practices and their effects on firm performance, Journal of Operations Management, vol.21, pp.4-405, 2002.

Y. Keraron and A. Bernard, The function of the document in the product life cycle, Bath (UK), 2004.

Y. Keraron, A. Bernard, and B. Bachimont, Annotation functionalities to enable an improved use of digital technical publication, International Workshop on Annotation for Collaboration, pp.24-25, 2005.

R. Klein, Knowledge Modelling in Design ? the MOKA framework, Proceedings of the International AI en DesignKri 98 An Icremental Part Manufacturing Cost Estimation Algorithm Using Petri Nets, ASME DECT'98, 1998.

Y. Kuwata, M. Labrousse, A. Bernard, P. Véron-labrousse, M. et al., Proposition d'un modèle conceptuel unifié pour la gestion dynamique des connaissances d'entreprise, thèse de Doctorat de l'Université et de l'Ecole Centrale de Nantes Generic FBS concept for Process / Product / Resource integration, in Tools and Methods of Competitive Engineering Modèle FBS enrichi pour la modélisation des processus d'entreprise, 3ème Colloque International, Conception et Production Intégrées, Managing Knowledge using a Semantic-Network, proceedings of AAAI Spring Symposium on Artificial Intelligence in Knowledge Management Enterprise processes traceability based on a FBS approach, 5e Congrès International de Génie Industriel Contribution à la traçabilité des processus d'entreprise par une approche FBS, Congrès Français de Mécanique, pp.94-98384, 1997.

M. Labrousse, A. Bernard, and P. Véron, Référentiel numérique "moto" : proposition d'un modèle conceptuel de base, IDMME, vol.2002, 2002.

F. Laroche, A. Bernard, M. Cotte, S. Deniaud-alberta, C. et al., A new methodology for a new life of old technical machines, CIRP Design Seminar Recent and future trends in cost estimation, International Journal of Computer Integrated Manufacturing, vol.15, pp.6499-510, 2002.

J. Lemoigne, La modélisation des systèmes complexes, Dunod, 1990.

T. Lesprier, Réalisation hybride de prototypes complexes à fonctionnalités évolutives, 2005.

M. Lévy, J. P. Jouyet, Y. Liu, and A. H. Basson, L'économie de l'immatériel -La croissance de demain, http://immateriel.minefi.gouv.fr/images/stories/immateriel.pdf, rapport de la Commission sur l'Economie de l'Immatériel, Case Study Using COM (OLE) to Link CAD and Manufacturing Cost Estimation Software', COMA'04, International Conference on Competitive Manufacturing, pp.168-174, 2004.

C. Lohman, L. Fortuin, and M. Wouters, Designing a performance measurement system: A case study, European Journal of Operational Research, vol.156, issue.2, pp.267-286, 2004.
DOI : 10.1016/S0377-2217(02)00918-9

M. Lombard and L. G. Yesilbas, Towards a framework to manage formalised exchanges during collaborative design, Special issue: Computational engineering in systems applications, pp.343-357, 2003.
DOI : 10.1016/j.matcom.2005.11.005
URL : https://hal.archives-ouvertes.fr/hal-00788129

P. Lonchampt, G. Prudhomme, D. Lopez, and R. , Assessment of mechanical products during the conceptual design stage using value criteria, 4d International Conf. on Integrated Design and Manufacturing in Mechanical Engineering IDMME, Améliorer l'efficacité des systèmes de management de la qualité en capitalisant les connaissances, 2002.

P. Lorino, Le Balanced ScoreCard revisité : dynamique et pilotage de performance, Actes du 22ième Congrès de l'Association Francophone de Comptabilité, Target Costing ou gestion par coût-cible, Revue Française de Comptabilité, pp.35-46, 1994.

P. Lorino, Le contrôle de gestion stratégique: La gestion par les activités, 1991.

C. A. Mcmahon, M. D. Giess, S. J. Culley, R. Demarco, J. Green et al., Information management for through life product support: the curation of digital engineering data Integrated Design-to-cost -Empowering Engineers to Meet Affordability Goals, Cirp Design Seminar, Digital enterprise technology in production networks, Int. Journal of Advanced Manufacturing Technology, pp.126-421, 2005.

P. Martin and A. D. Acunto, Design of a production system: An application of integration product-process, Les Technologies de l'Information et de la Communication en conception collaborative multi-site, pp.7-8509, 2002.
DOI : 10.1080/0951192031000115831

S. Mathelin, J. Boujut, and M. Tollenaere, Improving collaborative design tools in automotive industry: a case study, 15th International Conference on Engineering Design -ICED, 2005.
URL : https://hal.archives-ouvertes.fr/hal-00373083

N. Matta, O. Corby, and M. Ribiere, Méthodes de capitalisation de mémoire de projet, Rapport de recherche Interaction : Homme Machine, Images, Données et Connaissances Méthodes de résolution de problèmes : leur explicitation et leur représentation dans MACAO-II, Thèse de doctorat, 1995.

M. Mauchand, Conception à coût objectif, modèle générique d'entreprise de fonderie sable ? acier ; limite de modélisation, 2003.

C. Merlo, P. K. Girard, I. Mertins, R. Finke, and . Orth, Modélisation des Connaissances en Conduite de l'Ingénierie : Mise en OEuvre d'un Environnement d'Assistance aux Acteurs, Thèse de l'université de Bordeaux I, GRAI Engineering Method: An Object-oriented Approach for Information System Modeling, Computational Engineering in Systems Applications Multiconferences ? CESA Organisational Knowledge Management: from Strategy to Operational Implementation, pp.355-361, 2003.

P. Mévellec, Les param??tres de conception des syst??mes de co??ts??: ??tude comparative, Comptabilit?? - Contr??le - Audit, vol.9, issue.1, pp.95-110, 2003.
DOI : 10.3917/cca.091.0095

P. Mévellec, Whole life-cycle costs: a new approach, 24th Annual Congress of the European Accounting Association, 2001.
DOI : 10.1504/IJPLM.2006.011058

P. Mévellec, P. Mévellec, and M. Lebas, Le coût global, nouvelle frontière du calcul de coût, FINÉCO Managing simultaneously cost and value: the challenge, The Role of Management Accounting in Creating Value, pp.13-25, 1998.

P. Mévellec, Activity-based costing: a call for a French approach, 1994.

P. Mévellec, Systèmes de calcul de coûts de revient et subventionnements croisés, 1993.

P. Mévellec, Outils de gestion, la pertinence retrouvée, Editions Comptables Malesherbes, 1991.

C. Midler, Auto qui n'existait pas, pp.2-10, 1993.

A. Mille, Gestion des connaissances : problématiques actuelles, livre Connaissances et coopération dans les systèmes industriels, sous la direction de R, Soenen et J. Perrin, Hermes Science ed°, vol.5, pp.131-146, 2002.

M. Missikoff, Ontologies for Interoperability, presentation at INTEROP ? EMOI Workshop, 2004.

M. Missikoff and F. Taglino, SymOntoX: a Web-ontology tool for ebusiness domains, Proceedings of the 7th International Conference on Properties and Applications of Dielectric Materials (Cat. No.03CH37417), p.343, 2003.
DOI : 10.1109/WISE.2003.1254508

M. Missikoff, R. Navigli, and P. Velardi, Integrated approach to Web ontology learning and engineering, Computer, vol.35, issue.11, 2002.
DOI : 10.1109/MC.2002.1046976
URL : http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.5.5601

P. Mognol, Réalisation de pièces unitaires et petites séries : De l'utilisation performante et raisonnée des process de production, Mémoire d'habilitation à diriger des recherches, MOKA: Methodology for Knowledge Based Engineering Application, 2001.

L. Morel and V. Boly, Theoretical approach of the interest of technological forecasting tools in the design and optimisation of thermodynamics systems Extending the concept of supply chain: The effective management of value chains, International Journal on Energy Environment Economics International Journal of Production Economics, vol.87, pp.309-320, 2003.

M. Bigand, D. Corbel, and J. P. Bourey, Information system for production engineering: contribution to maintaining consistency of composite data using an object-oriented approach, International Journal of Computer Integrated Manufacturing Vol, vol.15, pp.233-241, 2002.

I. Nonaka and H. Takeuchi, La connaissance créatrice, la dynamique de l'entreprise apprenante, 1997.

I. Nonaka, R. Toyama, N. Konno, R. Norman, and R. Ramirez, SECI, Ba and Leadership: a Unified Model of Knowledge Creation, From value chain to value constellation: designing interactive strategy, pp.5-34, 1993.

J. Perrin, E. Ecosip, G. Perrin, J. Petiot, and B. Yannou, Prix de revient et contrôle de gestion par la méthode GP, Dunod. [Pet 04a Conception intégrée orientée client, Processus, méthodes et outils, Mémoire d'habilitation à diriger des recherches Measuring consumer perceptions for a better comprehension, specification and assessment of product semantics, Petiot J.F. Nantes. International Journal of Industrial Ergonomics, vol.33, pp.507-525, 1963.

C. Petitdemange, La maîtrise de la valeur: La gestion de projet et l'ingénierie simultanée ? Paris-La Défense: Afnor Gestion, pp.2-12, 1991.

C. Petitdemange, La compétitivité par la maîtrise des coûts : Conception à coût objectif et analyse de la valeur -Afnor Gestion, Impact environnemental en Prototypage Rapide, DEA Ecole Centrale de Nantes -ED : Mécanique, Thermique et Génie Civil ? SPI, 1990.

D. Plessis and M. , Drivers of knowledge management in the corporate environment, International Journal of Information Management, vol.25, issue.3, pp.268-4012193, 2005.
DOI : 10.1016/j.ijinfomgt.2004.12.001

J. P. Poitou, Documentation is Knowledge : An Anthropological Approach to Corporate Knowledge Management Competitive Advantage: creating and sustaining superior performance, Proceedings of ISMICK'95Por 98] Porter M, pp.91-103, 1995.

M. Porter, What is strategy?, Harvard Business Review, pp.61-78, 1996.

N. Pre-04a-]-du-preez and B. Katz, A Methodology for the Integration of General Knowledge Management Principles into Project Driven Business Processes, International Conference on Competitive Manufacturing, 2004.

N. Pre-04b-]-du-preez and L. Louw, A Roadmap Approach to Implementing theory of Constraints in Manufacturing Organisations, International Conference on Competitive Manufacturing, 2004.

N. Pre-04c-]-du-preez and J. W. Uys, The Application of Descriptive taxonomies to Facilitate Automatic Keyword Suggestion, International Conference on Competitive Manufacturing, 2004.

S. Rabeau, Utilisation d'un outil d'aide a la décision pour la prédiction du risque suicidaire par les médecins généralistes, 2003.

R. Ramirez, Value co-production: intellectual origins and implications for practice and research, Strategic Management Journal Contribution à une méthodologie de capitalisation des connaissances basée sur le raisonnement à partir de cas : Application au diagnostic dans une plate-forme d'e-maintenance, Rasovska I, issue.20, pp.49-66, 1999.

D. Raviart, O. Senechal, and C. Tahon, Methodology for a physico-economic product evaluation, starting in the design phase, Control Engineering Practice, vol.6, issue.4, pp.489-498, 1998.
DOI : 10.1016/S0967-0661(98)00034-3

S. Rehman and M. Guenov, A methodology for modelling manufacturing costs at conceptual design, Computers & Industrial Engineering, vol.35, issue.3-4, pp.623-626, 1998.
DOI : 10.1016/S0360-8352(98)00174-0

U. Reimer, Knowledge Integration for Building Organisational Memories, proceedings of KI'97, Workshop : Knowledge-Based Systems for Knowledge Management in Enterprises, 1997.

B. Rose, Proposition d'un référentiel support à la conception collaborative : CO²MED (COllaborative COnflict Management in Engineering Design), prototype logiciel dans le cadre du projet IPPOP, 2004.

B. Rose, L. Gzara, M. Lombard, L. Lossent, and G. Ris, Vers un référentiel commun pour les connaissances collaboratives dans l'activité de conception de produits, décembre. [Rou 06 Ingénierie de la conception et cycle de vie des produits, traité IC2 ? série Productique, pp.12-13, 2002.

R. Roy, S. Forsberg, S. Kelvesjo, C. Rush, G. A. Ruiz-dominguez et al., Risk analysis of parametric cost estimates within a concurrent engineering environment Analysis of cost estimating processes used within a concurrent engineering environment throughout a product life cycle, 7th ISPE International Conference on Concurrent Engineering: Research and Applications. [Rui 05 Analyse Comparative de deux Expériences de Conception Collaboratives du Point de Vue Macroscopique », 9ème Colloque National AIP 7th ISPE International Conference on Concurrent Engineering: Research and Applications, pp.58-67, 2000.

C. Rush, R. Roy, C. Rush, and R. R. , Expert judgement in cost estimating: Modelling the reasoning process Concurrent Engineering: Research and Applications (CERA)Knowledge in Cost Modelling The Cost Engineer: The Journal of the Association of Cost Engineers, Journal, vol.39, issue.1, pp.10-12, 2001.

T. L. Saaty, A scaling method for priorities in hierarchical structures, Journal of Mathematical Psychology, vol.15, issue.3, pp.229-241, 1977.
DOI : 10.1016/0022-2496(77)90033-5

T. L. Saaty, The analytic hierarchy processNew York, 1980.

C. Savage, Fifth Generation Management, Co-creating through Virtual Enterprising, Dynamic Teaming and Knowledge Networking, 1991.

K. K. Schmid and I. John, A customizable approach to full lifecycle variability management, Science of Computer Programming, vol.53, issue.3, pp.259-284, 1999.
DOI : 10.1016/j.scico.2003.04.002

P. Seguela, O. Senechal, and C. Tahon, Construction de modèles de connaissances par analyse linguistique de relations lexicales dans les documents techniques Pilotage des systèmes de production vers la performance globale, Mémoire d'habilitation à diriger des recherches A methodology for integrating economic criteria in design and production management decisions, Thèse de doctorat de l'université Paul Sabatier Toulouse 3, école doctorale Informatique et Télécommunications, pp.557-574, 1998.

O. Senechal and C. Tahon, A modelling approach for production costing and continuous improvement of manufacturing processes, Production Planning & Control, vol.8, issue.8, pp.731-742, 1997.
DOI : 10.1080/095372897234623

C. E. Shannon, A Mathematical Theory of Communication, Bell System Technical Journal, vol.27, issue.3, pp.379-423623, 1948.
DOI : 10.1002/j.1538-7305.1948.tb01338.x

G. Simon, Modèles et méthodes pour la conception des mémoires d'entreprise. Le système DOLMEN : une application en métallurgie, 1997.

M. Smialek and L. Balcerek, The knowledge-based content management application design methodology, Icons : Intelligent Content Management System, pp.2001-32429, 2003.

R. Soenen, . Cnrs-prosper, and . Janvier, Rapport d'activité du projet METACOG: Méthodologique d'Aide à la Conception pour un Coût Objectif Global, programme Total quality management, ISO 9000 certification and performance improvement, International Journal of Quality & Reliability Management, vol.17, pp.2-0265, 2000.

J. J. Tarí and V. Sabater, Human aspects in a quality management context and their effects on performance, The International Journal of Human Resource Management, vol.25, issue.3, pp.484-503, 2006.
DOI : 10.1111/j.1748-8583.1992.tb00263.x

W. A. Taylor and G. H. Wright, A longitudinal study of TQM implementation: factors influencing success and failure, Omega, vol.31, issue.2, pp.97-111, 2003.
DOI : 10.1016/S0305-0483(03)00017-3

C. Tahon, Evaluation des performances des systèmes de production, pp.2-7462, 2003.

B. Tixier, La problématique de la gestion des connaissances, Ingénierie des Connaissances, rapport de recherche N° 01.9, www.sciences.univ-nantes.fr/irin/Vie/RR/indexGB.html, Systèmes de gestion de connaissances : acquisition de connaissances dans un système à base de cas et aide à l'estimation du coût, 2001.

F. Tomala and O. Senechal, Innovation management: a synthesis of academic and industrial points of view, International Journal of Project Management, vol.22, issue.4, pp.281-287, 2004.
DOI : 10.1016/j.ijproman.2003.06.003

F. Tomala and O. Senechal, Évaluation prospective de la performance des systèmes de Production -Considérations économiques, Evaluation des performances des systèmes de production, pp.2-7462, 2003.

T. Tomala, F. Senechal, and O. , Proposition d'application de méthodes d'analyse de données pour le calcul du coût d'utilisation d'un produit, CPI2003 : 3ème Conférence International de Conception et Production Intégrées, 2003.

F. Tomala, Proposition de modèles et méthodes pour l'aide à l'évaluation de la performance globale d'une innovation dès sa conception, 2002.

B. Trebucq, Evaluation et Amélioration des processus de conception dans les filières métiers, 2001.

J. P. Tsang, The PORPEL Process Planner, Proceedings of 19th CIRP Seminar on Manufacturing Systems, pp.115-123, 1988.

. Gero, Applications of, Proceedings of the Fifth International Conference, pp.177-193, 1920.

B. Vallespir, C. Merle, G. J. Doumeingts-]-f, and . Van-houten, GIM: A technico-economic methodology to design manufacturing systems The Challenge of Digital Manufacturing, Design in the Era of Mass Customisation, Int. Conf on Competitive Manufacturing PART : A Computer aided Process Planning System, pp.81-99, 1991.

B. Vincent, Analyse comparée de méthodes de gestion des connaissances pour une approche managériale, Xième Conférence de l'Association Internationale de Management Stratégique, 13- 14-15 juin Knowledge Management: Aspects of knowledge, Management Services, vol.45, issue.11, pp.16-19, 2001.

G. Wallace and P. Sackett, Integrated design for low production volume, large, complex products, Integrated Manufacturing Systems, pp.5-16, 1996.

D. E. Whitney, Assembly and Disassembly Processes in Product Life Cycle Perspectives, CIRP Annals, Keynote Paper, STC A, p.579. [Whi 88, Manufacturing by design, pp.83-91, 1988.

B. Wielinga and F. Sprumont, KADS modeling approch to knowledge engineering Towards a knowledge-based model for the computer aided design process, Concurrent Engineering-Research and Applications, vol.10, pp.2129-142, 1992.

P. Xirouchakis, D. Kiritsis, and K. P. Neuendorf, A Petri net system for Process Planning Cost Estimation, Int Journal in Advances in Engineering Software, vol.30, issue.6, pp.357-387, 1999.

P. Xirouchakis, D. Kiritsis, J. G. Persson-yacoub, M. , and D. Esteve, Petri net technique for process planning cost estimation; CIRP GA 98 Conception des systèmes: calculs technico-économiques et aide à la décision dans la conduite d'un projet "recherche Technico-economic optimization real time control of projects of research-development, IPMA World Congress on Project Management, pp.19-20, 1998.

B. Yannou and J. Petiot, From Non-Explicit Need to Product Assessment: a New Four- Spaces Design Model, International Journal of Design Sciences and Technology, vol.12, pp.13-25, 2004.
URL : https://hal.archives-ouvertes.fr/hal-00748735

Y. , ]. B. Yannou, J. Yannou, B. , F. Limayem et al., Needs, Perceptions, Functions and Products : highlight on promising design methods linking them, 4d International Conf. on Integrated Design and Manufacturing in Mechanical Engineering IDMME'02 Comparaison des apports de l'analyse de la valeur et de la méthode spec pour l'aide à la conception préliminaire de produits, Mécanique et Industries, vol.3, pp.2-189, 2002.

M. Yoshimura, K. Izui, and Y. Fujimi, Optimising the decision-making process for large-scale design problems according to criteria interrelationships, Int. J. Production Research, vol.9, issue.41, pp.1987-2002, 2003.

M. Zacklad and M. Grundstein, Ingéniérie et capitalisation des connaissances (Traité IC2 série informatique et systèmes d'information), ed° Hermes Science, 2001.

M. Zacklad, La théorie des transactions intellectuelles : une approche gestionnaire et cognitive pour le traitement du COS, Intellectica, numéro spécial sur le COS, pp.30-2000195, 2000.

O. Zirmi and H. Paris, Modélisation de l'usinabilité des pièces aéronautiques dans un contexte de conception de gamme d'usinage, 9ème Colloque National AIPPRIMECA, pp.5-6, 2005.

G. L. Zuniga, Ontology: Its Transformation From Philosophy to Information Systems, FOIS'01, 2001.

R. T. Choo and J. Szekely, The Effect of Gas Shear Stress on Marangoni Flows in Arc Welding, Welding Research Supplement, pp.223-233, 1991.

A. Debuigne, Caractéristique de l'électrode de tungstène en soudage TIG, Soudage et Techniques Connexes, pp.9-32, 1996.

J. F. Key, Arc Physics of Gas Tungsten Arc Welding, ASM Handbook, Welding Brazing and Soldering, vol.6, pp.30-35, 1993.

S. Y. Lee and S. J. Na, A Numerical Analysis of a Stationary, Gas Tungsten Welding Arc Considering Various Electrode Angles, Welding Research Supplement, pp.269-279, 1996.

S. Marya, Effect of minor chemistry elements on GTA weld fusion zone characteristics of a commercial grade titanium, Scripta Materialia, vol.34, issue.11, p.11, 1996.
DOI : 10.1016/1359-6462(96)00037-1

P. F. Mendez and T. Eagar, Modeling Penetration and Free Surface Depression during High Current Arc Welding, Massachusetts Institute of Technology, ASM 98, Trends in Welding Research, Proc. Conf, pp.13-18, 1998.

C. , B. J. Keene, R. F. Brooks, and A. Olusanya, The Surface, p.316, 1984.

W. Savage, S. Strunck, and Y. Ishikawa, The Effect of Electrode Geometry on Gas Tungsten Arc Welding, Welding Journal Research Supplement, pp.489-496, 1994.

K. Tsai, Heat Distribution and Weld Bead Geometry in Arc Welding, 1983.

N. Perry and A. Candlot, Emergence of Knowledge Symbiotic & Collaborative Networks: how to reach the future work Standards? Int, Journal on Decision Support Systems, vol.43, issue.4, pp.167-9236, 2007.

P. Mevellec and N. Perry, Whole life-cycle costs: a new approach, International Journal of Product Lifecycle Management, vol.1, issue.4, 2006.
DOI : 10.1504/IJPLM.2006.011058

D. Preez, N. Perry, N. Candlot, A. Bernard, A. Uys et al., Customised high-value document generation, CIRP Annals - Manufacturing Technology, vol.54, issue.1, pp.277-320, 2005.
DOI : 10.1016/S0007-8506(07)60064-X
URL : https://hal.archives-ouvertes.fr/hal-00517233

N. Perry and A. Bernard, Cost objective PLM and CE, Concurrent Engineering 2003: the Vision for the Future Generation in Research and Applications Title Volume 1 - Enhanced interoperable systems, J. Cha et al, pp.817-822, 2003.

N. Perry, S. Marya, and E. Soutif, Enhanced Weld Penetrations in Titanium during GTA and Laser Welding through Flux Applications Titanium'99: Science and Technology, CRISM publishing, vol.III, pp.1746-1753, 2000.