A. A03-406, Produits métalliques : Fatigue sous sollicitations d'amplitude variable : Méthode rainflow de comptage de cycles, 1993.

]. A. Bak99 and . Baker, Bonded composite repair of fatigue-cracked primary aircraft structure, Composite Structures, vol.47, pp.431-443, 1999.

]. X. Bal00 and . Balandraud, Changement de phase et changements d'´ echelle dans les alliagesàalliagesà mémoire de forme, Thèse, 2000.

]. A. Bas01 and . Bassetti, Lamelles pré-contraintes en fibres de carbone pour le renforcement de ponts rivetés endommagés par fatigue, 2001.

C. Bathias and J. P. Ba¨?lonba¨?lon, La fatigue des matériaux et des structures, 1997.

A. [. Boulanger, C. Chrysochoos, A. Mabru, and . Galtier, Calorimetric analysis of dissipative and thermoelastic effects associated with the fatigue behavior of steels, International Journal of Fatigue, vol.26, issue.3, pp.221-229, 2004.
DOI : 10.1016/S0142-1123(03)00171-3

. [. Backer and R. Jones, Bonded repair of aircraft structures, 1998.
DOI : 10.1007/978-94-009-2752-0

A. A. Backer, L. R. Rose, and R. Jones, Advances in the bonded composite repair of metallic aircraft structures, 2002.

G. [. Curà, R. Curti, and . Sesana, A new iteration method for the thermographic determination of fatigue limit in steels, International Journal of Fatigue, vol.27, issue.4, pp.453-459, 2005.
DOI : 10.1016/j.ijfatigue.2003.12.009

G. Curti, A. Geraci, and A. Risitano, Un nuovo metodo per la determinazione rapida del limite di fatica, pp.634-644, 1989.

H. [. Chrysochoos and . Louche, Thermal and dissipative effects accompanying Lüders band propagation, Materials Science and Engineering A, vol.307, pp.15-22, 2001.

G. Curti, G. L. Rosa, M. Orlando, and A. Risitano, Analisi tramite infrarosso termico della temperatura limite in prove di fatica, 14th AIAS Italian National Conference, 1986.

O. A. Chrysochoos, G. Maisonneuve, H. Martin, J. C. Caumon, and . Chezeau, Plastic and dissipated work and stored energy, Nuclear Engineering and Design, vol.114, issue.3, pp.323-333, 1989.
DOI : 10.1016/0029-5493(89)90110-6

]. P. Col05 and . Colombi, Plasticity induced fatigue crack growth retardation model for steel elements reinforced by composite patch, Theoretical and Applied Fracture Mechanics, pp.63-76, 2005.

]. B. Cro56 and . Crossland, Effect of large hydrostatic pressures on the torsional fatigue strength of an alloy steel, Institution of Mechanical Engineers, International Conference on Fatigue on Metals, pp.138-149, 1956.

]. B. Cro70 and . Crossland, The effect of pressure on the fatigue of metals. In mechanical behaviour of materials under pressure, pp.299-354, 1970.

B. [. Carmet, J. L. Weber, and . Robert, Fatigue life assessment of components and structures under multiaxial service loading, 4th International Conference Fatigue 2000, Fatigue and Durability Assessment of Materials, Components and Structures, 2000.

W. [. Chung and . Yang, A study of the fatigue crack growth behaviour of thick aluminium panels repaired with a composite patch

A. [. Diaz, G. H. Armas, G. E. Kaufmann, and . Galizzi, Fatigue damage accumulation around a notch using a digital image measurement system, Experimental Mechanics, vol.22, issue.3, pp.241-246, 2004.
DOI : 10.1007/BF02427889

]. K. Dan93, . Dang, and . Van, Advances in multiaxial fatigue, ASTM STP 1191, pp.120-130, 1993.

D. [. Davis and . Bond, Principles and practices of adhesive bonded structural joints and repairs, International Journal of Adhesion and Adhesives, vol.19, issue.2-3, pp.91-105, 1999.
DOI : 10.1016/S0143-7496(98)00026-8

F. A. Diaz, J. R. Yates, and E. A. Patterson, Some improvements in the analysis of fatigue cracks using thermoelasticity, International Journal of Fatigue, vol.26, issue.4, pp.365-376, 2004.
DOI : 10.1016/j.ijfatigue.2003.08.018

J. [. Fogue and . Bahuaud, Fatigue multiaxialè a durée de vie illimitée. 7 e Congrès Français de Mécanique, pp.30-31, 1985.

G. Fargione, A. Geraci, G. L. Rosa, and A. Risitano, Rapid determination of the fatigue curve by the thermographic method, International Journal of Fatigue, vol.24, issue.1, pp.11-19, 2002.
DOI : 10.1016/S0142-1123(01)00107-4

A. M. Freudenthal and R. A. Heller, On Stress Interaction in Fatigue and a Cumulative Damage Rule, Journal of the Aerospace Sciences, vol.26, issue.7, pp.431-442, 1959.
DOI : 10.2514/8.8131

]. M. Fog87 and . Fogue, Critère de fatiguè a longue durée de vie pour desétatsdesétats multiaxiaux de contraintes sinuso¨?dalessinuso¨?dales en phase et hors phase, Thèse, 1987.

L. [. Fatemi and . Yang, Cumulative fatigue damage and life prediction theories: a survey of the state of the art for homogeneous materials, International Journal of Fatigue, vol.20, issue.1, pp.9-34, 1998.
DOI : 10.1016/S0142-1123(97)00081-9

]. R. Gat61 and . Gatts, Application of a cumulative damage concept to fatigue

]. R. Gat62 and . Gatts, Cumulative fatigue damage with random loading, ASME Journal of Basic Engineering, vol.84, pp.403-409, 1962.

]. A. Gcm-+-03, P. Galtier, E. Cugy, Y. Maronne, A. Yoshida et al., Integration of process operation in the fatigue calculation of sheets structural parts, International Body Engineering Conference, pp.123-128, 2003.

P. Germain, Q. S. Nguyen, and P. Suquet, Continuum Thermodynamics, Journal of Applied Mechanics, vol.50, issue.4b, pp.1010-1020, 1983.
DOI : 10.1115/1.3167184

URL : https://hal.archives-ouvertes.fr/hal-00105630

R. Goland, The stress in cemented joints, Journal of Applied Mechanics, vol.11, pp.17-27, 1944.

]. H. Gro60 and . Grover, Fatigue of aircraft structures, ASTM STP, vol.274, pp.120-124, 1960.

A. [. Grübisic and . Simbürger, Fatigue under combined out-of-phase multiaxial stresses, International Conference on Fatigue Testing and Design, pp.1-28, 1976.

]. D. Hen55 and . Henry, A theory of fatigue damage accumulation in steel, Trans. of the ASME, vol.77, pp.913-918, 1955.

L. Hollaway and M. Leeming, Strengthening of reinforced concrete structures, 1999.
DOI : 10.1533/9781855737617

F. [. Hénaff and . Morel, Fatigue des structures : endurance, critères de dimensionnement, propagation des fissures, rupture, 2005.

H. Hosseini-toudeshky, G. Sadeghi, and H. R. Daghyani, Experimental fatigue crack growth and crack-front shape analysis of asymmetric repaired aluminium panels with glass/epoxy composite patches, Composite Structures, vol.71, issue.3-4, pp.401-406, 2005.
DOI : 10.1016/j.compstruct.2005.09.032

M. [. Kaye and . Heller, Through-thickness shape optimisation of bonded repairs and lap-joints, International Journal of Adhesion and Adhesives, vol.22, issue.1, pp.7-21, 2002.
DOI : 10.1016/S0143-7496(01)00029-X

D. [. Krapez and . Pacou, Thermography detection of damage initiation during fatigue tests, SPIE's Aerosense 2002 Meeting, pp.2002-124, 2002.

J. [. Lemaitre and . Chaboche, Aspect phénoménologique de la rupture par endommagement, Journal de Mécanique Appliquée, vol.2, pp.317-365, 1978.

K. [. Luong, . Dang, and . Van, Infrared thermographic evolution of fatigue limit in metals, 1992.

]. H. Lou99 and . Louche, Analyse par thermographie infrarouge des effets dissipatifs de la localisation dans des aciers, Thèse, 1999.

G. , L. Rosa, and A. Risitano, Thermographic methodology for the rapid determination of the fatigue limit of materials and mechanical components, International Journal of Fatigue, vol.22, pp.65-73, 2000.

S. [. Lieurade, . Française-de-métallurgie, and . De-matériaux, Commission fatigue des métaux. La pratique des essais de fatigue, 1982.

R. [. Leaity and . Smith, THE USE OF SPATE TO MEASURE RESIDUAL STRESSES AND FATIGUE CRACK GROWTH, Fatigue & Fracture of Engineering Materials and Structures, vol.2, issue.4, pp.271-282, 1989.
DOI : 10.1016/0142-1123(86)90005-8

]. M. Luo95 and . Luong, Infrared thermography scanning of fatigue in metals, Nuclear Engineering and Design, vol.158, pp.363-376, 1995.

]. M. Luo98a and . Luong, Fatigue limit evaluation of metals using an infrared thermographic technique, Mechanics of Materials, vol, vol.28, pp.155-163, 1998.

M. P. Luong, H. Louche, P. Vacher, and R. Arrieux, Infrared thermography of fatigue in metals Thermal observations associated with the Portevin -Le Chatelier effect in an Al-Mg alloy, Thermosense XIV. International Conference on Thermal Sensing and Imaging Diagnostics Applications, pp.188-196, 1998.

. Huang, Thermographic detection of fatigue damage of pressure vessel at 1,000 Hz and 20 Hz, Scripta Materialia, vol.42, pp.389-395, 2000.

]. C. Mas55 and . Massonnet, Le dimensionnement despì eces de machines Contribution expérimentalè a l'´ etude de l'effet d'´ echelle et des entailles, pp.203-222, 1955.

]. J. Mat05 and . Mathias, Etude du comportement mécanique de patchs composites utilisés pour le renforcement de structures métalliques aéronautiques

]. J. Mbg06a, X. Mathias, M. Balandraud, and . Grédiac, Applying a genetic algorithm to the optimization of composite patches, Computers and Structures, vol.84, pp.823-834, 2006.

]. J. Mbg06b, X. Mathias, M. Balandraud, and . Grédiac, Experimental investigation of composite patches with a full-field measurement method, Composites Part A, vol.37, pp.177-190, 2006.

A. [. Morabito, V. Chrysochoos, U. Dattoma, and . Galietti, Analysis of thermoelastic and dissipative effects related to the fatigue of 2024 T3 aluminium alloy, Quantitative InfraRed Thermography Journal, vol.36, issue.1, pp.99-116, 2004.
DOI : 10.1016/S0142-1123(03)00171-3

J. [. Manson, S. R. Freche, and . Ensign, Application of a double linear damage rule to cumulative fatigue, fatigue crack propagation, ASTM STP 415, pp.384-412, 1967.

M. [. Mathias and . Grédiac, Applying the grid method to validate a numerical model predicting the transverse shear stress distributions in patched structures, Composites Part A: Applied Science and Manufacturing, vol.39, issue.8, 2006.
DOI : 10.1016/j.compositesa.2007.10.014

J. D. Mathias, M. Grédiac, and X. Balandraud, Optimization of composite patches to reinforce aeronautic structures, AIAA Journal, 2006.

A. [. Maronne, J. L. Galtier, T. Robert, and . Ishikawa, Cutting process influence on fatigue steel sheets properties, 15th International Conference on Fatigue Damage of Materials, Experiments and analyses, pp.13-22, 2003.

]. M. Min45 and . Miner, Cumulative Damage in Fatigue, Journal of Applied Mechanics, vol.12, pp.159-164, 1945.

A. [. Meurling, L. Melander, M. Linder, and . Larsson, The influence of mechanical and laser cutting on the fatigue strengths of carbon and stainless sheet steels, Scandinavian Journal of Metallurgy, vol.30, issue.5, pp.309-319, 2001.
DOI : 10.1034/j.1600-0692.2001.300506.x

]. K. Nga03 and . Ngargueudedjim, ContributionàContributionà l'´ etude des lois d'endommagement en fatigue, Thèse, Institut National des Sciences Appliquées de Lyon, 2003.

S. [. Naboulsi and . Mall, Fatigue crack growth analysis of adhesively repaired panel using perfectly and imperfectly composite patches, Theoretical and Applied Fracture Mechanics, pp.13-28, 1997.
DOI : 10.1016/S0167-8442(97)00027-X

J. [. Ngargueudedjim, ]. A. Robertph69, R. J. Pringle, and . Harker, Adaptation of cumulative damage models to multiaxial fatigue Environmental fatigue testing of molded plastics for prosthetic heart valves, Materialprüfung Experimental Mechanics, vol.48, issue.9, pp.160-163171, 1969.

G. [. Pogoretskii and . Karpenko, On the effect of specimen length on the cyclic strength of steel, Zavodskaya Laboratoria (Russia), vol.31, pp.1497-1501, 1965.

. Pps-+-04-]-o, T. Plekhov, N. Palin-luc, S. Saintier, O. Uvarov et al., Fatigue crack initiation and growth in a 35CrMo4 steel investigated by infrared thermography, Fatigue and Fracture of Engineering Materials and Structures, vol.28, pp.169-178, 2004.

P. [. Robert, S. Velleaud, and . Lepetit, Influence des procédés de découpe sur la tenue en fatigue de l'acier P220, 2004.

]. A. Sim75 and . Simbürger, Festigkeitsverhalten zäher Werkstoffe bei einer mehrachsigen phasenverschobenen Schwingbeanspruchung mit körperfesten und veränderlichen Hauptspannungsrichtungen, L.B.F, p.121, 1975.

]. G. Sin55 and . Sines, Failure of materials under combined repeated stresses with superimposed static stress, NACA Technical Note, pp.145-169, 1955.

]. G. Sin81 and . Sines, Fatigue criteria under combined stresses or strains, Journal of Engineering Materials and Technology, vol.103, pp.82-90, 1981.

J. [. Seo, H. R. Lee, and . Daghyani, Fatigue crack growth behavior of cracked aluminum plate repaired with composite patch, Composite Structures, vol.57, issue.1-4, pp.323-330, 2003.
DOI : 10.1016/S0263-8223(02)00095-8

. Smh-+-07-]-v, S. Sabelkin, M. A. Mall, R. M. Hansen, M. Vanderwaker et al., Investigation into cracked aluminium plate repaired with bonded composite patch, Composite Structures, vol.79, pp.55-66, 2007.

]. B. Tik07 and . Tikri, Etude et amélioration de la loi d'endommagement non linéaire de Chaboche, 2007.

M. Y. Tsai, D. W. Oplinger, and J. Morton, Improved theoretical solutions for adhesive lap joints, International Journal of Solids and Structures, vol.35, issue.12, pp.1163-1185, 1998.
DOI : 10.1016/S0020-7683(97)00097-8

D. [. Underhill and . Duquesnay, The dependence of the fatigue life of adhesive joints on surface preparation, International Journal of Adhesion and Adhesives, vol.26, issue.1-2, pp.62-66, 2006.
DOI : 10.1016/j.ijadhadh.2005.03.006

]. B. Web99 and . Weber, Fatigue multiaxiale des structures industrielles sous chargement quelconque, Thèse, Institut National des Sciences Appliquées de Lyon, 1999.

]. W. Wei and . Weibull, A statistical representation of fatigue failure in solids

A. [. Wang, M. Rider, R. Heller, and . Kaye, Theoretical and experimental research into optimal edge taper of bonded repair patches subject to fatigue loadings, International Journal of Adhesion and Adhesives, vol.25, issue.5, pp.410-426, 2006.
DOI : 10.1016/j.ijadhadh.2004.11.007

B. Yang, P. K. Liaw, M. Morrison, C. T. Liu, R. A. Buchanan et al., Temperature evolution during fatigue damage, Intermetallics, vol.13, issue.3-4, pp.419-428, 2005.
DOI : 10.1016/j.intermet.2004.07.032

A. [. Zenner, J. Simbürger, and . Liu, On the fatigue limit of ductile metals under complex multiaxial loading, International Journal of Fatigue, vol.22, issue.2, pp.137-145, 2000.
DOI : 10.1016/S0142-1123(99)00107-3