Matériaux magnétiques en génie électrique, Editions Hermès Lavoisier, pp.2006-2011 ,
Pré-dimensionnement et étude de sensibilité vibro-acoustique de machines à courant alternatif et à vitesse variable, Thèse de doctorat de l'école, pp.2005-2009 ,
Modélisation et optimisation des alternateurs à griffes ? application au domaine automobile, Thèse de doctorat de l'Institut National Polytechnique de GrenobleALL-87] S. Allano, Etude de machines à reluctances variables polyentrefers alimentées à moyenne fréquence, Thèse d, pp.1987-67, 2004. ,
Convective heat transfer in an annulus with an inner rotating cylinder, bulletin of JSME, vol.10, issue.39, pp.1967-89 ,
An experimental study of heat transfer in a vertical annulus with a rotating inner cylinder, International Journal of Heat and Mass Transfer, vol.32, issue.8, pp.1517-1527, 1989. ,
DOI : 10.1016/0017-9310(89)90073-2
Contribution à l'étude des conditions d'écoulement dans le circuit de refroidissement d'un moteur électrique de type ouvert, p.62, 1987. ,
Measurements of Diabatic Flow in an Annulus With an Inner Rotating Cylinder, Journal of Heat Transfer, vol.84, issue.2, pp.97-10559, 1962. ,
DOI : 10.1115/1.3684335
Heat transfer between concentric rotating cylinders, Journal of Heat Transfer, pp.175-186, 1959. ,
Conception de moteurs asynchrones triphasés, Editions de l'école Polytechnique de Montréal, 1997. ,
Predicting iron losses in soft magnetic materials with arbitrary voltage supply: an engineering approach, IEEE Transactions on Magnetics, vol.39, issue.2, pp.981-989 ,
DOI : 10.1109/TMAG.2003.808599
A 2D model of the induction machine: an extension of the modified winding function approach, IEEE Transaction on Energy Conversion, vol.19, issue.1, pp.2004-97 ,
Analyse exp??rimentale des transferts de chaleur en espace annulaire ??troit et rainur?? avec cylindre int??rieur tournant, International Journal of Heat and Mass Transfer, vol.41, issue.10, pp.1279-1291 ,
DOI : 10.1016/S0017-9310(97)00317-7
??tude exp??rimentale et num??rique des transferts de chaleur en espace annulaire sans d??bit axial et avec cylindre int??rieur tournant, International Journal of Thermal Sciences, vol.38, issue.7, pp.547-559, 1999. ,
DOI : 10.1016/S0035-3159(99)80035-X
Réduction de modèles thermiques par la théorie des réseaux, application à la surveillance d'une machine asynchrone par couplage d'un modèle thermique réduit avec un schéma équivalent électrique, 2000. ,
Mod??lisation de la denture des machines asynchrones. Ph??nom??ne de r??sonance, Journal de Physique III, vol.7, issue.5, pp.1009-1023 ,
DOI : 10.1051/jp3:1997171
Etude des pertes magnétiques supplémentaires dans les machines asynchrones alimentées par onduleur à modulation de largeur d'impulsion, Thèse de doctorat de l'Institut National Polytechnique de Grenoble, p.99, 1996. ,
Modélisation et mesure de pertes fer dans les machines électriques, application à la machine asynchrone, Thèse de doctorat de l'Institut National Polytechnique de Grenoble, 1999. ,
Eddy current loss analysis of laminated stator in brushless DC motor driven by PWM inverter, pp.2002-2002 ,
Bruit magnétique des machines asynchrones, procédure de réduction passives et actives, Thèse de doctorat de l'Université d'Artois, 2000. ,
An improved iron loss estimation for permanent magnet brushless machines, IEEE Transactions on Energy Conversion, vol.14, issue.4, pp.1391-1395 ,
DOI : 10.1109/60.815078
Methodologies for coupled transient electromagnetic-thermal finite-element modeling of electrical energy transducers, IEEE Transactions on Industry Applications, vol.38, issue.5, pp.1244-1250, 2002. ,
DOI : 10.1109/TIA.2002.803024
Calculation of iron losses in induction motors using the finite element method, pp.1512-1515, 2000. ,
FLUENT 6.2 User's guide, 2005. ,
Heat transfer in an annular gap, International Journal of Heat and Mass Transfer, vol.21, pp.1459-1466 ,
Heat-transfer characteristics of the rotational and axial flow between concentric cylinders, Transactions of the ASME, pp.79-90, 1958. ,
Losses in grid and inverter supplied induction machine drives, IEE Proceedings Electric Power Applications, pp.712-724, 2003. ,
DOI : 10.1049/ip-epa:20030848
The classification of coupled field problems, IEEE Transactions on Magnetics, vol.35, issue.3, pp.1618-1621 ,
DOI : 10.1109/20.767304
Assessment of power losses of an inverter-driven induction machine with its experimental validation, IEEE Transactions on Industry Applications, vol.39, issue.4, pp.994-1004, 2003. ,
DOI : 10.1109/TIA.2003.813744
Convection heat transfer in the entry region of a tube which revolves about an axis parallel to itself, International Journal of Heat and Mass Transfer, vol.10, issue.3, pp.333-347, 1967. ,
DOI : 10.1016/0017-9310(67)90150-0
Experimental investigation of the effect of entry conditions and rotation on flow resistance in circular tubes rotating about a parallel axis, International Journal of Heat and Fluid Flow, vol.5, issue.2, pp.121-127 ,
DOI : 10.1016/0142-727X(84)90032-8
Electric motor silencer-formation and elimination of the noises in the electric motors, 1950. ,
Modes of adiabatic and diabatic fluid flow in an annulus with an inner rotating cylinder, Transactions of the ASME, pp.753-765 ,
A simple method of estimating the minor loop hysteresis loss in thin laminations, IEEE Transactions on Magnetics, vol.14, issue.5, pp.386-388 ,
DOI : 10.1109/TMAG.1978.1059858
Acoustic noise of electromagnetic origin in a fractional-slot induction machine, COMPEL, pp.2008-89 ,
Heat transfer characteristics of the annulus of twocoaxial cylinders with one cylinder rotating, International Journal of Heat and Mass Transfer, vol.32, issue.4, pp.711-722 ,
DOI : 10.1016/0017-9310(89)90218-4
Hysteresis analysis for the permanent magnet assisted synchronous reluctance motor by coupled FEM and Preisach modelling, IEEE Transactions on Magnetics, vol.35, issue.3, pp.1203-1206 ,
DOI : 10.1109/20.767165
Laminar Heat Transfer and Pressure Drop in a Rectangular Duct Rotating About a Parallel Axis, Journal of Heat Transfer, vol.108, issue.2, pp.350-356, 1986. ,
DOI : 10.1115/1.3246928
Thermal analysis for design of high performance motors, IEEE, InterSociety Conference of Thermal Phenomena, pp.424-433, 1998. ,
A Dynamic Core Loss Model for Soft Ferromagnetic and Power Ferrite Materials in Transient Finite Element Analysis, IEEE Transactions on Magnetics, vol.40, issue.2, pp.1318-1321 ,
DOI : 10.1109/TMAG.2004.825025
Calcul des machines électriques, Tome 1, Bibliothèque de l'ingénieur, pp.1955-96 ,
Numerical study of steady laminar fully developed fluid flow and heat transfer in rectangular and elliptical ducts rotating about a parallel axis, International Journal of Heat and Mass Transfer, vol.39, issue.4, pp.867-875, 1996. ,
DOI : 10.1016/0017-9310(95)00069-0
Modelling and analysis of magnetic noise in squirrel-cage induction motors, 2000. ,
Simulation of airflow and heat transfer in small alternators using CFD, IEE Proceedings Electric Power Applications, pp.146-152, 2003. ,
DOI : 10.1049/ip-epa:20020754
Modeling of iron losses of permanent-magnet synchronous motors, IEEE Transactions on Industry applications, vol.39, issue.3, pp.734-742, 2003. ,
Improvements in Air Flow in the End Region of a Large Totally Enclosed Fan Cooled Induction Motor, IEEE International Conference on Electric Machines and Drives, 2005., pp.579-584 ,
DOI : 10.1109/IEMDC.2005.195781
Forced convective heat transfer in a straight pipe rotating around a parallel axis, International Journal of Heat and Mass Transfer, vol.10, issue.9, pp.1179-1194, 1967. ,
DOI : 10.1016/0017-9310(67)90083-X
Heat transfer in the entrance region of tubes that rotate about a parallel axis, ARCHIVE: Journal of Mechanical Engineering Science 1959-1982 (vols 1-23), vol.20, issue.6, pp.319-325, 1978. ,
DOI : 10.1243/JMES_JOUR_1978_020_057_02
A pressure transmission system for flow resistance measurements in a rotating tube, Journal of Physics E: Scientific Instruments, vol.14, issue.2, pp.208-214 ,
DOI : 10.1088/0022-3735/14/2/016
Effects of end winding porosity upon the flow field and ventilation losses in the end region of TEFC induction machines, IEE Proceedings Electric Power Applications, pp.423-428, 1998. ,
DOI : 10.1049/ip-epa:19982170
Effect of geometric changes on the flow and heat transfer in the end region of a TEFC induction motor, 9th International Conference on Electrical Machines and Drives, pp.40-44 ,
DOI : 10.1049/cp:19990987
nd report : turbulent region Computation of laminar heat transfer in rotating rectangular ducts, International Journal of Heat and Mass Transfer Journal of Heat Transfer, vol.11, issue.107, pp.1185-1201, 1968. ,
Caractérisation des échanges de chaleur dans un espace annulaire encoché ou lisse avec le cylindre intérieur tournant, pp.170-177, 1994. ,
Ventilation and heat transfer in a symmetrically ventilated salient pole synchronous machine, IEE Power Electronics, Machines and Drives, pp.462-467 ,
Origines des erreurs de modélisation sur les pertes électromagnétiques dans les machines électriques, Conférence EF, pp.2007-2042 ,
???ber die magnetische Nachwirkung, Zeitschrift f???r Physik, vol.94, issue.5-6, pp.277-302, 1935. ,
DOI : 10.1007/BF01349418
Une m??thode caract??risant l???influence r??ciproque entre parois: application aux ??changes thermiques dans une cavit?? rotor???stator, International Journal of Heat and Mass Transfer, vol.43, issue.24, pp.4433-4445 ,
DOI : 10.1016/S0017-9310(00)00066-1
Calculation of losses in ferro- and ferrimagnetic materials based on the modified Steinmetz equation, IEEE Transactions on Industry Applications, vol.37, issue.4, pp.1055-1061 ,
DOI : 10.1109/28.936396
Electrotechnique industriel, Lavoisier Technique & Documentation, 1996. ,
A Reynolds analogy solution for the heat transfer characteristics of combined Taylor vortex and axial flows, International Journal of Heat and Mass Transfer, vol.22, issue.5, pp.679-689 ,
DOI : 10.1016/0017-9310(79)90116-9
Development of secondary flow and convective heat transfer in isothermal???iso-flux rectangular ducts rotating about a parallel axis, International Journal of Heat and Mass Transfer, vol.42, issue.3, pp.497-510 ,
DOI : 10.1016/S0017-9310(98)00199-9
Convective Heat Transfer of the Rotational and Axial Flow between Two Concentric Cylinders, Bulletin of JSME, vol.7, issue.26, pp.1964-1987 ,
DOI : 10.1299/jsme1958.7.385
Stability of viscous fluid between two rotating cylinders, Philosophical Transactions of the, pp.289-343, 1923. ,
Convection thermique et massique ? nombre de Nusselt : partie1, p.8206 ,
Ventilateurs compresseurs ? Notions fondamentales, dimensionnement ,
Résistivité des métaux, Techniques de l'Ingénieur ,
Coupled electromagnetic-thermal modeling of electrical machines, IEEE Transactions on Magnetics, vol.39, issue.3, pp.1614-1617, 2003. ,
DOI : 10.1109/TMAG.2003.810420
Vibro-acoustic analysis of inverter driven induction motors, Thèse de doctorat de l, p.74, 1998. ,
An investigation of laminar flow in the rotor windings of directly???cooled electrical machines, ARCHIVE: Journal of Mechanical Engineering Science 1959-1982 (vols 1-23), vol.16, issue.6, pp.408-417 ,
DOI : 10.1243/JMES_JOUR_1974_016_075_02
A Study of Heat Transfer in a Rotating Cylindrical Tube, Journal of Heat Transfer, vol.102, issue.4, pp.612-616, 1980. ,
DOI : 10.1115/1.3244360
An improved formula for lamination core loss calculations in machines operating with high frequency and high flux density excitation, Industry Applications Conference, 37th IAS Annual meeting, pp.759-766 ,
Effect of rotor eccentricity and magnetic circuit saturation on acoustic noise and vibration of single-phase induction motors, Electrical Machine and Power Systems, pp.443-457, 1997. ,
Improved formulations for rotational core losses in rotating electrical machines, IEEE Transactions on Magnetics, vol.34, issue.4, pp.2234-2242, 1998. ,