H. Aka-]:-akachi and F. Polasek, Pulsating Heat Pipe : Review of the present state of the Art, Technical Report to Industrial Technology Research Institute Energy and Resources Laboratory, 1995.

M. R. Ali-]:-aligoodarz and D. B. Kenning, Flow boiling in narrow channels, Proc. Eng. Fondation Conference, Convective flow boiling Taylor and Francis, 1995.

. A. Ayo-]:-a, R. Ayon, C. C. Braff, H. H. Lin, M. A. Sawin et al., Characterization of a Time Multiplexed Inductively Coupled Plasma Etcher, Journal of the Electrochemichal Society, vol.146, pp.339-349, 1999.

. A. Ben-]:-d, R. T. Benson, M. R. Mitchell, and . Tuck, Micro-machined heat pipes in silicon substrates, Module Conference MCM'96, pp.127-129

S. [. Bricard and . Chaudourne, Caloducs " Techniques de l'ingénieur, traité Génie énergétique

. [. Cotter, Principles and prospects for micro heat pipes, Int. Heat Pipe Conf, vol.4, pp.328-334, 1984.

M. Cao, J. E. Gao, B. Beam, and . Donovan, Experiments and analyses of flat miniature heat pipes, pp.1402-1409, 1996.

M. Cao and . Gao, Wickless network heat pipes for high heat flux spreading applications, International Journal of Heat and Mass Transfer, vol.45, issue.12, pp.2539-2547, 2002.
DOI : 10.1016/S0017-9310(01)00338-6

C. Van and P. , Liquid-vapor phase-change phenomena: An introduction to the Thermophysics of Vaporization and Condensation Processes in Heat Transfer Equipment, Series in Chemical and Mechanical Engineering, 1992.

[. Luo and L. Lin, The application of nanosecond-pulsed laser welding technology in MEMS packaging with a shadow mask " Sensors and actuators A 97-98, pp.398-404, 2002.

[. Chi and S. W. , Heat pipe theory and Practice " McGrawHill, 1976.

[. Nathalie, Etude et réalisation de microcaloducs en silicium Rapport de post-doctorat CEA-LETI, 2002.

[. Pascal, Mise au point et caractérisation de procédés plasma intervenant lors de l'élaboration des interconnexions pour les filières, Thèse de l'université d, 1999.

P. D. Dun-]:-dunn and D. A. Reay, Heat pipes " Pergamon Gautherin : "Interaction plasma-surface, 1983.

. Gao-]:-m, Y. Gao, J. E. Cao, B. Beam, and . Donovan, Structural optimization of axially grooved flat miniature heat pipes " AICHE symposium series, pp.152-157, 1997.

M. Gao, Y. Cao, W. K. Jones, and M. A. Zampino, Ceramic Miniature Heat Pipes and Liquid Charging Methods, Heat Transfer Engineering, vol.31, issue.7, pp.429-434, 2000.
DOI : 10.2172/7792

. Gro-]:-m, M. Groll, V. Schneider, and . Sartre, Thermal control of electronic equipment by heat pipes, pp.323-352, 1998.

[. Grundner and H. Jacob, Investigations on hydrophilic and hydrophobic silicon (100) wafer surfaces by X-ray photoelectron and high-resolution electron energy loss-spectroscopy, Applied Physics A Solids and Surfaces, vol.10, issue.1, pp.73-82, 1986.
DOI : 10.1007/BF00616822

[. Grover, G. M. , T. P. Cotter, and G. F. Erickson, Structures of Very High Thermal Conductance, Journal of Applied Physics, vol.35, issue.6, pp.1990-1991
DOI : 10.1063/1.1713792

A. Hopkins, D. Faghri, and . Khrustalev, Flat Miniature Heat Pipes With Micro Capillary Grooves, Journal of Heat Transfer, vol.121, issue.1, pp.102-109, 1999.
DOI : 10.1115/1.2825922

. K. Ile-]:-r and . Iler, The chemistry of silica, 1979.

K. Jones, Y. Cao, M. Gao, and M. Gao, Embeddes heat pipes in ceramic electronic packages and filling process Micro heat pipes in low temperature cofire ceramic substrates, IEEE Transaction on components and packaging technologies, vol.26, issue.1, 2001.

[. Kang and D. Huang, Fabrication of star grooves and rhombus grooves micro heat pipe, Journal of Micromechanics and Microengineering, vol.12, issue.5, pp.525-531, 2002.
DOI : 10.1088/0960-1317/12/5/303

[. Kang, S. Tsai, and H. Ko, Metallic micro heat pipe heat spreader fabrication, Applied Thermal Engineering, vol.24, issue.2-3, pp.299-309, 2004.
DOI : 10.1016/j.applthermaleng.2003.08.008

[. Karim and O. , Etude des stratégies de refroidissement pour convertisseurs électroniques dans des véhicules automobiles hybrides, Thèse de doctorat de l'INPG, 2002.

[. Khrustalev, D. Faghri, and A. , Thermal Characteristics of Conventional and Flat Miniature Axially Grooved Heat Pipes, Journal of Heat Transfer, vol.117, issue.4, 1995.
DOI : 10.1115/1.2836280

[. Khrustalev, D. Faghri, and A. , Estimation of the maximum heat flux in the inverted meniscus evaporator of a falt miniature heat pipe, International Journal of heat and mass transfer, vol.39, 1996.

[. Kemme and J. E. , High Performances Heat Pipes " Thermionic Conversion Specialist Conference, 1967.

[. Lai, N. Cézac, C. Gillot, Y. Avenas, C. Schaeffer et al., Caractérisation d'un caloduc miniature en silicium " Congrès français de thermique, pp.3-6, 2003.

C. [. Lai, M. Gillot, Y. Ivanova, C. Avenas, C. Louis et al., Thermal characterization of flat silicon heat pipes, Twentieth Annual IEEE Semiconductor Thermal Measurement and Management Symposium (IEEE Cat. No.04CH37545), 2004.
DOI : 10.1109/STHERM.2004.1291296

[. Lasky, Wafer bonding for silicon???on???insulator technologies, Applied Physics Letters, vol.48, issue.1, 1986.
DOI : 10.1063/1.96768

[. Launay and S. , Performances thermiques de microcaloducs usiné dans du silicium. Modélisation et étude expérimentale, 2002.
DOI : 10.1051/lhb/2003080

[. Lee, Y. Lee, and Y. Kim, Fluxless laser reflow bumping of Sn-Pb eutectic solder, Scripta Materialia, vol.42, issue.8, pp.789-793, 2000.
DOI : 10.1016/S1359-6462(99)00431-5

L. Lin-]:-lin and R. Ponnappan, High performance miniature heat pipes, 2001.

M. Marc, Fundamentals of Microfabrication, 1997.

G. [. Mallik and . Peterson, Steady-State Investigation of Vapor Deposited Micro Heat Pipe Arrays, Journal of Electronic Packaging, vol.117, issue.1, pp.75-81, 1995.
DOI : 10.1115/1.2792070

. P. Mas-]:-w, G. Maszara, A. Goetz, J. B. Caviglia, and . Mckitterick, Bonding of silicon wafers for silicon-on-insulator, Journal of Applied Physics, vol.64, issue.15, 1988.

. S. Mur-]:-s, Y. K. Murthy, W. Joshi, and . Nakayama, Single chamber compact two-phase heat spreaders with microfabricated boiling enhancement structures, IEE Transactions on components and packaging technologies, vol.25, pp.156-163, 2002.

[. S. Murthy, Y. K. Joshi, and W. Nakayama, Orientation independent two-phase heat spreaders for space constrained applications, Microelectronics Journal, vol.34, issue.12, pp.1187-1193, 2003.
DOI : 10.1016/S0026-2692(03)00209-X

[. Pauling, The nature of the chemical bond" [PER]: Perret C Réalisation et optimisation de refroidisseurs à micro-canaux en technologie silicium, Thèse de doctorat de l'INPG, 2001.

[. P. Peterson, A. B. Duncan, and A. S. Ahmed, Experimental investigation of micro heat pipes in silicon wafers " Micromech. Sensors, Actuators and Systems ASME-DSC 32, pp.341-348, 1991.

[. P. Peterson, Overview of Micro Heat Pipe Research and Development, Applied Mechanics Reviews, vol.45, issue.5, pp.175-189, 1992.
DOI : 10.1115/1.3119755

[. P. Peterson, A. B. Duncan, and M. H. Weichold, Experimental Investigation of Micro Heat Pipes Fabricated in Silicon Wafers, Journal of Heat Transfer, vol.115, issue.3, pp.751-756, 1993.
DOI : 10.1115/1.2910747

[. P. Peterson, Modeling, Fabrication, and Testing of Micro Heat Pipes: An Update, Applied Mechanics Reviews, vol.49, issue.10S, pp.175-183, 1996.
DOI : 10.1115/1.3101969

M. J. Rightley, C. P. Tigges, R. C. Givler, C. V. Robino, J. J. Mulhall et al., Innovative wick design for multi-source, flat plate heat pipes, Microelectronics Journal, vol.34, issue.3, pp.187-194, 2003.
DOI : 10.1016/S0026-2692(02)00187-8

J. F. Sac-]:-sacadura, Initiation au transferts thermiques, 1992.

[. Sartre and M. Lallemand, Synthèse théorique et bibliographique sur les microcaloducs Journée d'Etudes SFT -GUT sur caloducs et boucles diphasiques à pompage capillaire, 1996.

[. Shah, R. K. Bhatti, and M. S. , Laminar convective heat transfer in ducts " Handbook of single phase convective heat transfer, 1987.

. E. Sch-]-g, R. Schneider, and . Devos, Nondimensional Analysis for the Heat Transport Capabilibty of Axially-Grooved Heat Pipes including Liquid/Vapor Interaction, AIAA AEROSPCE SCIENCES MEETING, vol.18, 1980.

. S. She-]:-d, R. T. Shen, D. Mitchell, and . Dobranich, Micro heat spreader enhanced heat transfer in MCMs, Module Conference MCM'95, pp.189-194

[. Suh, J. S. Greif, R. Grigoropoulos, and C. P. , Friction in micro-channel flows of a liquid and vapor in trapezoidal and sinusoidal grooves, International Journal of Heat and Mass Transfer, vol.44, issue.16, pp.3103-3109, 2001.
DOI : 10.1016/S0017-9310(00)00331-8

[. Tao, A. P. Malshe, and W. D. Brown, Selective bonding and encapsulation for wafer-level vacuum packaging of MEMS and related micro systems, Microelectronics Reliability, vol.44, issue.2, pp.251-258, 2004.
DOI : 10.1016/S0026-2714(03)00192-6

[. Thomas, Thin planar heat spreader, US Patent, vol.6158, p.502, 2000.

[. C. Tian, J. W. Weigold, and S. W. Pang, Comparison of Cl[sub 2] and F-based dry etching for high aspect ratio Si microstructures etched with an inductively coupled plasma source, Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures, vol.18, issue.4, 2000.
DOI : 10.1116/1.1306303

C. L. Tie-]:-tien and K. S. Chung, Entrainment Limits in Heat Pipes " 3 rd Int. Heat Pipe Conference, 1978.

[. Timoshenko, S. P. Williams, R. Goodman, and A. M. , Résistance des matériaux " pp-140 problème 21 Plaques et coques minces Wetting of thin layers of SiO 2 by water, Applied Physics Letters, vol.25, p.10, 1974.

. S. Wol-]:, R. N. Wolf, and . Tauber, Silicon processing for the VLSI, 1970.

. A. Zam-]:-m, W. K. Zampino, and . Jones, Embedded miniature heat pipes in ceramic cofire substrates " Aerospace Power Systems Conference, pp.29-34, 1999.