E. Kröner, Berechnung der elastischen Konstanten des Vielkristalls aus den Konstanten des Einkristalls, Berechnung der elastischen konstanten des Vielkristalls aus den Konstanten des Einskristalls, pp.504-518, 1958.
DOI : 10.1007/BF01337948

E. Kröner, Zur plastischen verformung des vielkristalls, Acta Metallurgica, vol.9, issue.2, pp.155-161, 1961.
DOI : 10.1016/0001-6160(61)90060-8

L. Kubin, Dislocations et effets de taille en plasticité, Comportement et effets d'échelle, pp.55-62, 2004.

A. Kumar, F. E. Hauser, and J. E. Dorn, Viscous drag on dislocations in aluminum at high strain rates, Viscous drag on dislocations in aluminum at high strain rates, p.1189, 1968.
DOI : 10.1016/0001-6160(68)90054-0

A. Kumar and R. C. Kumble, Viscous Drag on Dislocations at High Strain Rates in Copper, Journal of Applied Physics, vol.40, issue.9, pp.475-80, 1969.
DOI : 10.1063/1.1658222

P. Kumar, C. Martin, and S. B. Brown, Shear rate thickening flow behavior of semisolid slurries, Metallurgical Transactions A, vol.76, issue.5, pp.1107-1116, 1993.
DOI : 10.1016/0022-0248(86)90021-7

P. Kumar, C. Martin, and S. B. Brown, Constitutive modeling and characterization of the flow behavior of semi-solid metal alloys slurries???I. The flow response, Acta Metallurgica et Materialia, vol.42, issue.11, pp.3595-3602, 1994.
DOI : 10.1016/0956-7151(94)90426-X

P. Kumar, C. Martin, and S. B. Brown, Constitutive modeling and characterization of the flow behaviour of semi-solid metal alloy slurries ? II Structural evolution under shear deformation, Acta Metallurgica and Materialia, vol.42, pp.3603-3614, 1994.

I. A. Kunin, Elastic Media with Microstructure II: Three Dimensionnal Models, Series in Solid- State Sciences, 1983.
DOI : 10.1007/978-3-642-81960-5

L. Langlois and M. Berveiller, Overall softening and anisotropy related with the formation and evolution of dislocation cell structures, International Journal of Plasticity, vol.19, issue.5, pp.599-624, 2003.
DOI : 10.1016/S0749-6419(01)00074-2

L. Rosa, G. Risitano, and A. , Thermographic methodology for rapid determination of the fatigue limit of materials and mechanical components, International Journal of Fatigue, vol.22, issue.1, pp.65-73, 2000.
DOI : 10.1016/S0142-1123(99)00088-2

V. Laxmanan and M. Flemings, Deformation of semi-solid Sn-15 Pct Pb alloy, Metallurgical Transactions A, vol.13, issue.3, pp.1927-1937, 1980.
DOI : 10.1007/BF02655112

N. Laws and R. Mclaughlin, Self-Consistent Estimates for the Viscoelastic Creep Compliances of Composite Materials, Proceedings of the Royal Society, pp.251-273, 1978.
DOI : 10.1098/rspa.1978.0041

R. Lebensohn and C. N. Tomé, A self-consistent anisotropic approach for the simulation of plastic deformation and texture development of polycrystals: Application to zirconium alloys, Acta Metallurgica et Materialia, vol.41, issue.9, pp.2611-2624, 1993.
DOI : 10.1016/0956-7151(93)90130-K

T. Y. Liu, H. V. Atkinson, P. Kapranos, D. H. Kirkwood, and S. C. Hogg, Rapid compression of aluminum alloys and its relationship to thixoformability, Metallurgical and Materials Transactions A, vol.35, issue.3, pp.1545-1554, 2003.
DOI : 10.1007/s11661-003-0266-y

F. Louchet, L. Kubin, and D. Vesely, In situ deformation of b.c.c. crystals at low temperatures in a highvoltage electron microscope ? Dislocation mechanisms and strain-rate equation, Philosophical Magazine, pp.433-454, 1979.

J. P. Lorrain, Modélisation d'un critère de ductilité basé sur la perte d'ellipticité du module tangent élastoplastique, 2004.

L. D. Lucas, Viscosité des principaux métaux et métalloïdes, p.66, 1984.

A. Luft, J. Richter, W. Reitzenstein, and P. Finke, Der Einfluss der Temperatur auf das Verformungsverhalten, die Gleitgeometrie und Verformungsubstruktur von Molybdän-Einkristallen, B1. IV Akademie-Verlag, pp.285-320, 1972.

H. A. Luo and G. J. Weng, On eshelby's in a three-phase cylindrically concentric solid, and the elastic moduli of fiber-reinforced composites, Mechanics of Materials, vol.8, issue.2-3, pp.77-88, 1989.
DOI : 10.1016/0167-6636(89)90008-2

M. P. Luong, Fatigue limit evaluation of metals using an infrared thermographic technique, Mechanics of Materials, vol.28, issue.1-4, pp.155-163, 1998.
DOI : 10.1016/S0167-6636(97)00047-1

URL : https://hal.archives-ouvertes.fr/hal-00111598

A. R. Mclelland, N. G. Henderson, H. V. Atkinson, and D. H. Kirkwood, Anomalous rheological behaviour of semi-solid alloy slurries at low shear rates, Materials Science and Engineering: A, vol.232, issue.1-2, pp.110-118, 1997.
DOI : 10.1016/S0921-5093(97)00105-6

A. Makradi, S. Ahzi, R. V. Gregory, and D. D. Edie, A two-phase self-consistent model for the deformation and phase transformation behavior of polymers above the glass transition temperature: application to PET, International Journal of Plasticity, vol.21, issue.4, 2004.
DOI : 10.1016/j.ijplas.2004.04.012

C. Martin and L. Orgéas, Modélisation des procédés de mise en forme, dans Mise en forme des alliages métalliques à l'état semi-solide, sous la direction de M. Suery, pp.197-221, 2002.

R. Masson and A. Zaoui, Self-consistent estimates for the rate-dependentelastoplastic behaviour of polycrystalline materials, Journal of the Mechanics and Physics of Solids, vol.47, issue.7, pp.1543-1568, 1999.
DOI : 10.1016/S0022-5096(98)00106-9

R. Masson, M. Bornert, P. Suquet, and A. Zaoui, An affine formulation for the prediction of the effective properties of nonlinear composites and polycrystals, Journal of the Mechanics and Physics of Solids, vol.48, issue.6-7, pp.1203-1227, 2000.
DOI : 10.1016/S0022-5096(99)00071-X

URL : https://hal.archives-ouvertes.fr/hal-00114467

S. Mercier, N. Jacques, and A. Molinari, Validation of an interaction law for the Eshelby inclusion problem in elasto-viscoplasticity, International Journal of Solids and Structures, vol.42, issue.7, pp.1923-1941, 2005.
DOI : 10.1016/j.ijsolstr.2004.08.016

URL : https://hal.archives-ouvertes.fr/hal-00455522

L. Méric, P. Poubanne, and G. Cailletaud, Single Crystal Modeling for Structural Calculations: Part 1???Model Presentation, Journal of Engineering Materials and Technology, vol.113, issue.1, pp.162-170, 1991.
DOI : 10.1115/1.2903374

M. A. Meyers, O. Vöhringer, and V. A. Lubardra, The onset of twinning in metals: a constitutive description, Acta Materialia, vol.49, issue.19, pp.4025-4039, 2001.
DOI : 10.1016/S1359-6454(01)00300-7

A. Molinari, G. R. Canova, and S. Ahzi, A self consistent approach of the large deformation polycrystal viscoplasticity, Acta Metallurgica, vol.35, issue.12, pp.2283-2994, 1987.
DOI : 10.1016/0001-6160(87)90297-5

A. Molinari and M. El-mouden, The problem of elastic inclusions at finite concentration, International Journal of Solids and Structures, vol.33, issue.20-22, pp.3131-3150, 1996.
DOI : 10.1016/0020-7683(95)00275-8

A. Molinari, S. Ahzi, and R. Kouddane, On the self-consistent modeling of elastic-plastic behavior of polycrystals, Mechanics of Materials, vol.26, issue.1, pp.43-62, 1997.
DOI : 10.1016/S0167-6636(97)00017-3

P. Morgado, V. Favier, and P. Buessler, Analyse de l'échauffement en fatigue d'aciers sollicités en fatigue, Note interne ARCELOR Innovation R&D, 2002.

H. Mughrabi, Dislocation wall and cell structures and long-range internal stresses in deformed metal crystals, Acta Metallurgica, vol.31, issue.9, pp.1367-1379, 1983.
DOI : 10.1016/0001-6160(83)90007-X

D. Muller, X. Lemoine, and M. Berveiller, Nonlocal behavior of elastoplastic metals : theory and results, Transactions of the ASME, pp.378-383, 1994.

T. Mura, Micromechanics of defects in solids, 1987.

S. Nemat-nasser and M. Obata, Rate-Dependent, Finite Elasto-Plastic Deformation of Polycrystals, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.407, issue.1833, pp.343-345, 1986.
DOI : 10.1098/rspa.1986.0101

P. Neumann, The effect of surface related grain boundary stresses on fatigue, Scripta Metallurgica et Materialia, vol.26, issue.10, pp.1535-1540, 1992.
DOI : 10.1016/0956-716X(92)90252-A

M. Z. Omar, E. Palmiere, A. A. Howe, H. V. Atkinson, and P. Kapranos, Thixoforming of a high performance HP9/4/30 steel, Thixoforming of a high performance HP9/4/30 steel, pp.53-61, 2005.
DOI : 10.1016/j.msea.2004.12.013

A. Paquin, H. Sabar, and M. Berveiller, Integral formulation and self-consistent modelling of elastoviscoplastic behavior of heterogeneous materials, Archive of Applied Mechanics (Ingenieur Archiv), vol.69, issue.1, pp.14-35, 1999.
DOI : 10.1007/s004190050201

A. Paquin, S. Berbenni, V. Favier, X. Lemoine, and M. Berveiller, Micromechanical modeling of the elastic???viscoplastic behavior of polycrystalline steels, Micromechanical modeling of the elastic-viscoplastic behavior of polycrystalline steels, pp.1267-1302, 2001.
DOI : 10.1016/S0749-6419(00)00047-4

M. Perez, J. C. Barbé, Z. Néda, Y. Bréchet, and L. Salvo, Computer simulation of the microstructure and rheology of semi-solid alloys under shear, Acta Materialia, vol.48, issue.14, pp.3773-3782, 2000.
DOI : 10.1016/S1359-6454(00)00161-0

P. Castañeda and P. , The effective mechanical properties of nonlinear isotropic composites, Journal of the Mechanics and Physics of Solids, vol.39, issue.1, pp.45-71, 1991.
DOI : 10.1016/0022-5096(91)90030-R

C. J. Quaak and W. H. Kool, Properties of semisolid aluminium matrix composites, Materials Science and Engineering: A, vol.188, issue.1-2, pp.277-282, 1994.
DOI : 10.1016/0921-5093(94)90382-4

D. Raabe, M. Sachtleber, Z. Zhao, F. Roters, and S. Zaefferer, Micromechanical and macromechanical effects in grain scale polycrystal plasticity experimentation and simulation, Acta Materialia, vol.49, issue.17, pp.3433-3441, 2001.
DOI : 10.1016/S1359-6454(01)00242-7

E. F. Rauch and J. H. Schmitt, Dislocation substructures in mild steel deformed in simple shear, Materials Science and Engineering: A, vol.113, pp.441-448, 1989.
DOI : 10.1016/0921-5093(89)90331-6

J. Rice, On the Structure of Stress-Strain Relations for Time-Dependent Plastic Deformation in Metals, Journal of Applied Mechanics, vol.37, issue.3, pp.728-737, 1970.
DOI : 10.1115/1.3408603

F. Roters, D. Raabe, and G. Gottstein, Work hardening in heterogeneous alloys???a microstructural approach based on three internal state variables, Acta Materialia, vol.48, issue.17, pp.4181-4189, 2000.
DOI : 10.1016/S1359-6454(00)00289-5

Y. Rougier, Etude du comportement sous irradiation : Modélisation micromécanique de l'élastoviscoplasticité, 1994.

Y. Rougier, C. Stolz, and A. Zaoui, Self-consistent modelling of elastic-viscoplastic polycrystals, Comptes Rendus de l, Académie des Sciences, vol.318, pp.145-151, 1994.

A. Rusinek, Modélisation thermoviscoplastique d'une nuance de tôle d'acier aux grandes vitesses de déformation -Etude expérimentale et numérique du cisaillement, de la traction et de la perforation, 2000.

A. Rusinek and J. R. Klepaczko, Shear testing of a sheet steel at wide range of strain rates and a constitutive relation with strain-rate and temperature dependence of the flow stress, International Journal of Plasticity, vol.17, issue.1, pp.87-115, 2001.
DOI : 10.1016/S0749-6419(00)00020-6

H. Sabar, M. Berveiller, and M. Buisson, Problème d'inclusion à frontière mobile, Comptes Rendus de l, Académie des Sciences, vol.310, pp.447-452, 1990.

H. Sabar, M. Berveiller, V. Favier, and S. Berbenni, A new class of micro???macro models for elastic???viscoplastic heterogeneous materials, International Journal of Solids and Structures, vol.39, issue.12, pp.3257-3276, 2002.
DOI : 10.1016/S0020-7683(02)00256-1

URL : https://hal.archives-ouvertes.fr/hal-00128381

M. Sauzay, Effets de surface et d'anisotropie en fatigue multiaxiale, 2000.

M. Sauzay and P. Gilormini, Inclusion élastoplastique en surface, Comptes Rendus de l'Académie des Sciences -Series IIB -Mechanics-Physics-Astronomy, pp.117-122, 2000.

K. W. Schwarz, Simulation of dislocations on the mesoscopic scale. I. Methods and examples, Journal of Applied Physics, vol.85, issue.1, pp.108-119, 1999.
DOI : 10.1063/1.369429

J. F. Seconde and M. Suery, Effect of solidification conditions on deformation behaviour of semi-solid Sn-Pb alloys, Journal of Materials Science, vol.239, issue.12, pp.3995-4006, 1984.
DOI : 10.1007/BF00980763

R. Sedlá?ek, W. Blum, . Kratochv?l, and S. Forest, Subgrain formation during deformation: Physical origin and consequences, Metallurgical and Materials Transactions A, vol.309, issue.310, pp.319-327, 2002.
DOI : 10.1007/s11661-002-0093-6

M. Soler, Etude du vieillissement d'un acier à Bake-Hardening : évolution des propriétés mécaniques de traction ? corrélation avec la microstructure, 1998.

M. Suéry, Propriétés des pièces formées, dans Mise en forme des alliages métalliques à l'état semisolide , sous la direction, pp.115-125, 2002.

M. Suéry, Rhéologie des alliages semi-solides, dans Mise en forme des alliages métalliques à l'état semi-solide, sous la direction de M. Suery, pp.167-195, 2002.

L. Stainier, A. M. Cuitiño, and M. Ortiz, A micromechanical model of hardening, rate sensitivity and thermal softening in BCC single crystals, Journal of the Mechanics and Physics of Solids, vol.50, issue.7, pp.1511-1545, 2002.
DOI : 10.1016/S0022-5096(01)00114-4

URL : https://hal.archives-ouvertes.fr/hal-01004846

R. M. Stern and A. V. Granato, Overdamped resonance of dislocations in copper, Acta Metallurgica, vol.10, issue.4, pp.358-381, 1962.
DOI : 10.1016/0001-6160(62)90014-7

C. Stolz and A. Zaoui, Analyse morphologique et approches variationnelles du comportement d'un milieu élastique hétérogène, Comptes Rendus de l, Académie des Sciences, vol.312, pp.143-150, 1991.

P. Suquet, Elements of homogeneization for inelastic solid mechanic, Homogenization techniques for composite media, pp.193-278, 1985.

P. Suquet, Overall Properties of Nonlinear Composites, Académie des Sciences, vol.320, pp.563-571, 1995.
DOI : 10.1007/978-94-009-1756-9_19

L. Tabourot, M. Fivel, and E. Rauch, Generalised constitutive laws for f.c.c. single crystals, Materials Science and Engineering: A, vol.234, issue.236, pp.234-236, 1997.
DOI : 10.1016/S0921-5093(97)00353-5

M. Tang, L. P. Kubin, and G. R. Canova, Dislocation mobility and the mechanical response of b.c.c. single crystals: A mesoscopic approach, Acta Materialia, vol.46, issue.9, pp.3221-3235, 1998.
DOI : 10.1016/S1359-6454(98)00006-8

M. Tang, B. Devincre, and L. P. Kubin, Simulation and modeling of forest hardening in body centre cubic crystals at low temperature, Modelling and Simulation in, Materials Science and Engineering, vol.7, pp.893-908, 1999.

C. Teodosiu, A physical theory of the finite elastic-viscoplastic behaviour of single crystals, Engineering transactions, pp.151-184, 1975.

E. Valette-brives, Mise en forme d'aciers à l'état semi-solide : étude expérimentale et modélisation, 1992.

P. Vaucheret and A. Galtier, Etude de la microplasticité dans l'acier inoxydable 304 L, pp.63-69, 2002.

M. Verdier, Y. Brechet, and P. Guyot, Recovery of AlMg alloys: flow stress and strain-hardening properties, Acta Materialia, vol.47, issue.1, pp.127-134, 1998.
DOI : 10.1016/S1359-6454(98)00350-4

B. Weiss, Characterisation of mechanical and thermal properties of thin Cu foils and wires, Sensors and actuators, pp.172-182, 2002.

G. J. Weng, A Self-Consistent Scheme for the Relaxation Behavior of Metals, Journal of Applied Mechanics, vol.48, issue.4, pp.779-784, 1981.
DOI : 10.1115/1.3157733

A. Zaoui, Plasticité : approches en champ moyen, Homogénéisation en mécanique des matériaux 2, Hermes Science, pp.17-44, 2001.

H. M. Zbib, M. Rhee, and J. P. Hirth, On plastic deformation and the dynamics of 3D dislocations, International Journal of Mechanical Sciences, vol.40, issue.2-3, pp.113-127, 1998.
DOI : 10.1016/S0020-7403(97)00043-X

J. Z. Zhao, A. K. De, and B. C. De-cooman, Formation of the cottrell atmosphere during strain aging of bake-hardenable steels, Formation of the Cotrell atmosphere during strain aging of bakehardenable steels, pp.417-423, 2001.
DOI : 10.1007/s11661-001-0273-9

Z. Zhao, W. Mao, F. Roters, and D. Raabe, A texture optimization study for minimum earing in aluminium by use of a texture component crystal plasticity finite element method, Acta Materialia, vol.52, issue.4, pp.1003-1012, 2004.
DOI : 10.1016/j.actamat.2003.03.001

S. Berbenni, V. Favier, X. Lemoine, and M. Berveiller, Micromechanical modeling of the elastic-viscoplastic behavior of polycrystalline steels having different microstructures, Materials Science and Engineering: A, vol.372, issue.1-2, pp.128-136, 2004.
DOI : 10.1016/j.msea.2003.11.010

URL : https://hal.archives-ouvertes.fr/hal-00128379

G. Sell, C. Dahoun, A. Favier, V. Hiver, J. M. Philippe et al., Microstructure transformation and stress-strain behavior of isotactic polypropylene under large plastic deformation, IV.2.2 Approximation autocohérente, pp.1702-1715, 1997.
DOI : 10.1002/pen.11818

H. Sabar, M. Berveiller, V. Favier, and S. Berbenni, A new class of micro???macro models for elastic???viscoplastic heterogeneous materials, International Journal of Solids and Structures, vol.39, issue.12, pp.3257-3276, 2002.
DOI : 10.1016/S0020-7683(02)00256-1

URL : https://hal.archives-ouvertes.fr/hal-00128381