S. Abdennadher, Etude de l'´ ecrasement de structures alvéolaires sous sollicitation dynamique. Application aux matériaux cellulaires, Thèse de doctorat, 2004.

J. Achenbach, Wave Propagation in Elastic Solids, Journal of Applied Mechanics, vol.41, issue.2, 1978.
DOI : 10.1115/1.3423344

E. Andrews, G. Gioux, P. Onck, and L. Gibson, Size effects in ductile cellular solids. Part II: experimental results, International Journal of Mechanical Sciences, vol.43, issue.3, pp.701-713, 2000.
DOI : 10.1016/S0020-7403(00)00043-6

M. Ashby, A. Evans, L. Fleck, J. Gibson, J. Hutchinson et al., Metal Foams : A Design Guide, 2000.

M. Backman and W. Goldsmith, The mechanics of penetration of projectiles into targets, International Journal of Engineering Science, vol.16, issue.1, pp.1-99, 1978.
DOI : 10.1016/0020-7225(78)90002-2

J. Banhart, Manufacture, characterisation and application of cellular metals, Pregress in Material Science, pp.559-632, 2001.

J. Blazy, Comportement mécanique des mousses d'aluminium : caractérisations expérimentales sous sollicitations complexes et simulations numériques dans le cadre de l'´ elasto-plasticité compressible, Thèse de Doctorat, 2003.

T. Borvik, A. Clausen, and M. Langseth, Perforation of AA5083-H116 aluminium plates with conical-nose steel projectiles???experimental study, International Journal of Impact Engineering, vol.30, issue.4, pp.367-384, 2004.
DOI : 10.1016/S0734-743X(03)00072-1

T. Borvik, O. Hopperstad, M. Langseth, and K. Malo, Ballistic penetration of steel plates, International Journal of Impact Engineering, vol.22, issue.9-10, pp.855-886, 1999.
DOI : 10.1016/S0734-743X(99)00011-1

T. Borvik, O. Hopperstad, M. Langseth, and K. Malo, Effect of target thickness in blunt projectile penetration of Weldox 460 E steel plates, International Journal of Impact Engineering, vol.28, issue.4, pp.413-464, 2003.
DOI : 10.1016/S0734-743X(02)00072-6

T. Borvik, M. Langseth, O. Hopperstad, and K. Malo, Perforation of 12mm thick steel plates by 20mm diameter projectiles with flat, hemispherical and conical noses, International Journal of Impact Engineering, vol.27, issue.1, pp.19-35, 2002.
DOI : 10.1016/S0734-743X(01)00034-3

B. Budiansky and J. Hutchinson, Dynamic buckling of imperfection-sensitive structures, Proc. 11th international Congress of Applied Mechanics, 1964.
DOI : 10.1007/978-3-662-29364-5_85

C. Bibliographie-calladine and R. English, Strain-rate and inertia effects in the collapse of two types of energy-absorbing structure, International Journal of Mechanical Sciences, vol.26, issue.11-12, pp.689-701, 1984.
DOI : 10.1016/0020-7403(84)90021-3

C. Chree, The equations of an isotropic elastic solid in polar and cylindrical coordinates, their solutions and applications, Cambridge Phil. Soc. Trans, vol.14, pp.250-369, 1889.

G. Corbett, S. Reid, and W. Johnson, Impact loading of plates and shells by free-flying projectiles: A review, International Journal of Impact Engineering, vol.18, issue.2, pp.141-230, 1996.
DOI : 10.1016/0734-743X(95)00023-4

K. Dannemann and J. Lankford, High strain rate compression of closed-cell aluminium foams, Materials Science and Engineering: A, vol.293, issue.1-2, pp.157-164, 2000.
DOI : 10.1016/S0921-5093(00)01219-3

R. Davies, A Critical Study of the Hopkinson Pressure Bar, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.240, issue.821, pp.375-457, 1948.
DOI : 10.1098/rsta.1948.0001

V. Deshpande and N. Fleck, High strain rate compressive behaviour of aluminium alloy foams, International Journal of Impact Engineering, vol.24, issue.3, pp.277-298, 2000.
DOI : 10.1016/S0734-743X(99)00153-0

A. Fazekas, R. Densievel, L. Salvo, and Y. Brechet, Effect of microstructural topology upon the stiffness and strength of 2D cellular structures, International Journal of Mechanical Sciences, vol.44, issue.10, pp.2047-2066, 2002.
DOI : 10.1016/S0020-7403(02)00171-6

G. Gary, Dynamic buckling of an elastoplastic column, International Journal of Impact Engineering, vol.1, issue.4, pp.357-375, 1983.
DOI : 10.1016/0734-743X(83)90029-5

L. Gibson and M. Ashby, Cellular solids, 1988.
DOI : 10.1017/CBO9781139878326

W. Goldsmith and J. Sackman, An experimental study of energy absorption in impact on sandwich plates, International Journal of Impact Engineering, vol.12, issue.2, pp.241-262, 1992.
DOI : 10.1016/0734-743X(92)90447-2

W. Goldsmith, G. Wang, K. Li, and D. Crane, Perforation of cellular sandwich plates, International Journal of Impact Engineering, vol.19, issue.5-6, pp.361-379, 1997.
DOI : 10.1016/S0734-743X(97)00003-1

K. Graff, Wave motion in elastic solids, 1975.

A. Hanssen, Y. Girard, L. Olovsson, T. Berstad, and M. Langseth, A numerical model for bird strike of aluminium foam-based sandwich panels, International Journal of Impact Engineering, vol.32, issue.7, pp.1023-1037, 2005.
DOI : 10.1016/j.ijimpeng.2004.09.004

A. Hanssen, O. Hopperstad, M. Langsth, and H. Ilstad, Validation of constitutive models applicable to aluminium foams, International Journal of Mechanical Sciences, vol.44, issue.2, pp.359-406, 2002.
DOI : 10.1016/S0020-7403(01)00091-1

A. Harte and N. Fleck, Fatigue failure of an open cell and a closed cell aluminium alloy foam, Acta Materialia, vol.47, issue.8, pp.2511-2524, 1999.
DOI : 10.1016/S1359-6454(99)00097-X

F. Hild, CORRELI-LMT : A Software for Displacement Field Measurements by Digital Image Correlation, Rapport interne N?, vol.254, 2002.

H. Fatt, M. Park, and K. , Perforation of honeycomb sandwich plates by projectiles, Composites Part A: Applied Science and Manufacturing, vol.31, issue.8, pp.889-899, 2000.
DOI : 10.1016/S1359-835X(00)00021-X

B. Hopkinson, A method of measuring the pressure produced in the detonation of higt explosives or by the impact of bullets, Philos. Trans. R. Soc, pp.437-456, 1914.

J. O. Hallquist, Ls-dyna theoretical manual, 1998.

L. Kenny, Mechnical properties of particle stabilised Aliminium faom, Mater Sci Forum, vol.26, pp.217-222, 1996.

J. Klinworth and W. Stronge, Elasto-plastic yield limits and deformation laws for transversely crushed honeycombs, International Journal of Mechanical Sciences, vol.30, issue.3-4, pp.273-292, 1988.
DOI : 10.1016/0020-7403(88)90060-4

K. Kolsky, An investigation of the properties of materials at very high rrates of loading, Proc.Phys. Soc, pp.676-700, 1949.

M. Langseth, O. Hopperstad, and T. Berstad, Static and dynamic axial crushing of square thin-walled aluminium extrusions, International Journal of Impact Engineering, vol.18, issue.7-8, pp.949-968, 1996.
DOI : 10.1016/S0734-743X(96)00025-5

M. Langseth, O. Hopperstad, and T. Berstad, Crashworthiness of aluminium extrusions: validation of numerical simulation, effect of mass ratio and impact velocity, International Journal of Impact Engineering, vol.22, issue.9-10, pp.829-854, 1999.
DOI : 10.1016/S0734-743X(98)00070-0

M. Langseth and P. Larsen, Dropped objects' plugging capacity of steel plates: An experimental investigation, International Journal of Impact Engineering, vol.9, issue.3, pp.289-316, 1990.
DOI : 10.1016/0734-743X(90)90004-F

J. Lankford and K. Dannemann, Strain Rate Effects in Porous Materials, Proceedings of the Symposium of the Material Reseach Society, 1998.
DOI : 10.1177/0021955X7401000306

Y. Li, J. Li, and R. Zhang, Energy-absorption performance of porous materials in sandwich composites under hypervelocity impact loading, Composite Structures, vol.64, issue.1, pp.71-78, 2004.
DOI : 10.1016/j.compstruct.2003.07.003

U. Lindholm, R. Bessy, and G. Smith, Effect of strain rate on yield strength, tensile strength and elongation of three alimium alloys, J Mater JMLSA, vol.6, issue.1, p.119, 1971.

S. Lopatnikov, B. Gama, M. Haque, C. Karauthauser, and J. Gillespie, High-velocity plate impact of metal foams, International Journal of Impact Engineering, vol.30, issue.4, pp.421-445, 2004.
DOI : 10.1016/S0734-743X(03)00066-6

S. Lopatnikov, B. Gama, M. Haque, C. Krauthauser, J. Gillespie et al., Dynamics of metal foam deformation during Taylor cylinder???Hopkinson bar impact experiment, Composite Structures, vol.61, issue.1-2, pp.61-71, 2003.
DOI : 10.1016/S0263-8223(03)00039-4

E. Maire, A. Elmoutaouakkil, A. Fasekas, and L. Salvo, I n Situ X-Ray Tomography Measurements of Deformation in Cellular Solids, MRS Bulletin, vol.6, issue.04, pp.284-289, 2003.
DOI : 10.1002/(SICI)1527-2648(200004)2:4<175::AID-ADEM175>3.0.CO;2-W

K. Mccullough, N. Fleck, and M. Ashby, Uniaxial stress???strain behaviour of aluminium alloy foams, Acta Materialia, vol.47, issue.8, pp.2323-2330, 1999.
DOI : 10.1016/S1359-6454(99)00128-7

M. Meo, R. Vignjevic, and G. Marengo, The response of honeycomb sandwich panels under low-velocity impact loading, International Journal of Mechanical Sciences, vol.47, issue.9, pp.1301-1325, 2005.
DOI : 10.1016/j.ijmecsci.2005.05.006

R. Merle, Mise en oeuvre et analyse d'un essai de double cisaillement en grandes déformations sous sollicitations dynamiques. ApplicationàApplication`Applicationà la caractérisation des tôles métalliques utilisées dans l'industrie automobile, Thèse de Doctorat, 2006.

M. Meyers, Dynamic behaviour of materials, 1994.

R. Mines, C. Worrall, and A. Gibson, LOW VELOCITY PERFORATION BEHAVIOUR OF POLYMER COMPOSITE SANDWICH PANELS, International Journal of Impact Engineering, vol.21, issue.10, pp.855-979, 1998.
DOI : 10.1016/S0734-743X(98)00037-2

T. Mukai, H. Kanahashi, T. Miyoshi, M. Mabuchi, and T. Nieh, Experimental study of energy absorption in a close-celled aluminium foam under dynamic loading, Acta Metallurgica, vol.40, pp.921-927, 1999.

I. Nasri, H. Zhao, and Y. Girard, Etude du comportement des matériaux cellulaires métalliques sous impact sévère, Colloque National MECAMAT aussois 2004. Mécanismes et Mécanique des Matériaux et StructuresàStructures`Structuresà longueur interne, 2004.

O. Olurin, N. Fleck, and M. Ashby, Indentation resistance of an aluminium foam, Scripta Materialia, vol.43, issue.11, pp.983-989, 2000.
DOI : 10.1016/S1359-6462(00)00519-4

D. Radford, V. Deshpande, and N. Fleck, The use of metal foam projectiles to simulate shock loading on a structure, International Journal of Impact Engineering, vol.31, issue.9, pp.1152-1171, 2005.
DOI : 10.1016/j.ijimpeng.2004.07.012

T. Reddy, H. Wen, and D. Peter, Dynamic perforation of composite sandwich planels by projectiles with hemispherical and conical tips. Structures Under Extreme Loading Conditions ASME, pp.151-163, 1997.

S. Reid and C. Peng, Dynamic uniaxial crushing of wood, International Journal of Impact Engineering, vol.19, issue.5-6, pp.531-570, 1997.
DOI : 10.1016/S0734-743X(97)00016-X

A. Roach, K. Evans, and N. Jones, The penetration energy of sandwich panel elements under static and dynamique loading. Part I, Composite Structures, pp.855-879, 1998.

L. Salvo, Quasi-static indentation tests on sandwich panels, 2004.

R. Shyr and Y. Pan, Low velocity impact responses of hollow core sandwich laminate and interply hybrid laminate, Composite Structures, vol.64, issue.2, pp.189-198, 2004.
DOI : 10.1016/j.compstruct.2003.08.006

B. Simonsen and L. Lauriden, Energy absorption and ductile failure in metal sheets under lateral indentation by a sphere, International Journal of Impact Engineering, vol.24, issue.10, pp.1017-1039, 2000.
DOI : 10.1016/S0734-743X(00)00024-5

A. Tabiei and R. Mostafiz, Transient Response of a Projectile in Gun Launch Simulation Using Lagrangian and Ale Methods, The International Journal of Multiphysics, vol.4, issue.2, 2005.
DOI : 10.1260/1750-9548.4.2.151
URL : https://hal.archives-ouvertes.fr/hal-00783219

L. Tam and C. Calladine, Inertia an strain rate effets in a simple plate structure under impact loading, International Journal of Impact Engineering, vol.11, pp.689-701, 1991.

P. Tan, J. Harrigan, Z. Zou, and S. Li, Dynamic compressive strength properties of aluminium foams. Part I???experimental data and observations, Journal of the Mechanics and Physics of Solids, vol.53, issue.10, pp.2174-2205, 2005.
DOI : 10.1016/j.jmps.2005.05.007

M. Vural and G. Ravichandran, Dynamic response and energy dissipation characteristics of balsa wood: experiment and analysis, International Journal of Solids and Structures, vol.40, issue.9, pp.2170-2170, 2003.
DOI : 10.1016/S0020-7683(03)00057-X

H. Wen and N. Jones, Experimental investigation into the dynamic plastic response and perforation of a clumped circular plate struck transversely by a mass, Proc. Instn, 1994.

H. Wen, T. Reddy, S. Reid, and P. Soden, Indentation, Penetration and Perforation of Composite Laminate and Sandwich Panels under Quasi-Static and Projectile Loading, Key Engineering Materials, vol.141, issue.143, pp.141-143, 1998.
DOI : 10.4028/www.scientific.net/KEM.141-143.501

T. Wierszbicki and M. Hoo-fatt, Impact energy absorption of sandwich plates with crushable core, Proceedings of the ASME/AMD Symposiium, Impact Waves, and Fracture, pp.391-411, 1995.

E. Wu and W. Jiang, Axial crush of metallic honeycombs, International Journal of Impact Engineering, vol.19, issue.5-6, pp.439-456, 1996.
DOI : 10.1016/S0734-743X(97)00004-3

H. Zhao, Analyse de l'essai aux barres de Hopkinson, applicationàapplication`applicationà la mesure du comportement dynamique des matériaux, Thèse de Doctorat, 1992.

H. Zhao, Cellular Materials Under Impact Loading. AMAS Publications. Lecture notes series n?12, IPPT, 2004.
URL : https://hal.archives-ouvertes.fr/hal-00016340

H. Zhao, I. Elnasri, and S. Abdennadher, An experimental study on the behaviour under impact loading of metallic cellular materials, International Journal of Mechanical Sciences, vol.47, issue.4-5, pp.757-774, 2005.
DOI : 10.1016/j.ijmecsci.2004.12.012

H. Zhao and G. Gary, A three dimensional analytical solution of the longitudinal wave propagation in an infinite linear viscoelastic cylindrical bar. Application to experimental techniques, Journal of the Mechanics and Physics of Solids, vol.43, issue.8, pp.43-1335, 1995.
DOI : 10.1016/0022-5096(95)00030-M

H. Zhao and G. Gary, On the use of SHPB techniques to determine the dynamic behavior of materials in the range of small strains, International Journal of Solids and Structures, vol.33, issue.23, pp.3363-3375, 1996.
DOI : 10.1016/0020-7683(95)00186-7
URL : https://hal.archives-ouvertes.fr/hal-00111561

H. Zhao and G. Gary, A new method for the separation of waves. Application to the SHPB technique for an unlimited duration of measurement, Journal of the Mechanics and Physics of Solids, vol.45, issue.7, pp.1185-1202, 1997.
DOI : 10.1016/S0022-5096(96)00117-2
URL : https://hal.archives-ouvertes.fr/hal-00111583

H. Zhao and G. Gary, CRUSHING BEHAVIOUR OF ALUMINIUM HONEYCOMBS UNDER IMPACT LOADING, International Journal of Impact Engineering, vol.21, issue.10, pp.827-836, 1998.
DOI : 10.1016/S0734-743X(98)00034-7
URL : https://hal.archives-ouvertes.fr/hal-00111604