P. J. Antsaklis and A. Nerode, Hybrid Control Systems: An Introductory Discussion to the Special Issue, IEEE Transactions on Automatic Control, vol.43, issue.4, pp.457-460, 1998.
DOI : 10.1109/TAC.1998.664148

B. Armstrong-helouvry, Stick slip and control in low-speed motion, IEEE Transactions on Automatic Control, vol.38, issue.10, pp.1483-1496, 1993.
DOI : 10.1109/9.241562

D. Arthur, C. Dtsi, and . Scri-/-lpr-/-04rt, Couplage bras industriel TAO2000 ? Identification dynamique du bras RX90, 2004.

C. Bidard, C. Dtsi, and . Scri-/-lpr-/-04rt, Couplage bras industriel TAO2000 ? Spécification des données d'entrée pour le calcul du modèle dynamique du bras Dextre, 2004.

P. Bhatti and B. Hannaford, Single-chip velocity measurement system for incremental optical encoders, IEEE Transactions on Control Systems Technology, vol.5, issue.6, pp.654-661, 1997.
DOI : 10.1109/87.641408

J. M. Brown, A theoretical and experimental investigation into the factors affecting the Z-Width of a haptic display, 1995.

G. Casiez, Contribution à l'étude des interfaces haptiques ? Le DigiHaptic : un périphérique haptique de bureau à degrés de liberté séparés, 2004.

G. Champenois, A. Martinez, and J. P. Rognon, Implementation of RST controllers for a flexible servo considering practical limitations, Proceedings of IEEE/IAS International Conference on Industrial Automation and Control, 1995.
DOI : 10.1109/IACC.1995.465841

G. Chalubert, C. Dtsi, and . Srsi-/-lems-/-02rt, Carte variateur 3 axes CC ? Recette, réglages et modélisation technique moteur, 2003.

G. Chalubert, D. Houche, C. Dtsi, and . Srsi-/-lems-/-02rt, Carte variateur PC104 3 axes ? Optimisation de la raideur d'asservissement d'une interface haptique, 2003.

J. E. Colgate, P. E. Grafing, M. C. Stanley, and G. Schenkel, Implementation of stiff virtual walls in forcereflecting interfaces, Proceedings IEEE-VRAIS, pp.202-208, 1993.

J. E. Colgate and J. M. Brown, Factors affecting the Z-Width of a haptic display, Proceedings of the 1994 IEEE International Conference on Robotics and Automation, pp.3205-3210, 1994.
DOI : 10.1109/ROBOT.1994.351077

J. Colgate and G. Schenkel, Passivity of a class of sampled-data systems: Application to haptic interfaces, American control conference, pp.3236-3240, 1994.

R. Dhaouadi, N. Mohan, and L. Norum, Design and implementation of an extended Kalman filter for the state estimation of a permanent magnet synchronous motor, IEEE, Transactions on Power Electronics, pp.491-497, 1991.
DOI : 10.1109/63.85891

N. Diolaiti, G. Niemeyer, F. Barbagli, J. K. Salisbury, and C. Melchiorri, The Effect of Quantization and Coulomb Friction on the Stability of Haptic Rendering, First Joint Eurohaptics Conference and Symposium on Haptic Interfaces for Virtual Environment and Teleoperator Systems, pp.237-246, 2005.
DOI : 10.1109/WHC.2005.130

N. Diolaiti and G. Niemeyer, Wave haptics: Providing stiff coupling to virtual environnements " , Symposium on haptic interfaces for virtual environment and teleoperator systems, pp.185-192, 2006.

T. Flash and F. Mussa-ivaldi, Human arm stiffness characteristics during the maintenance of posture, Experimental Brain Research, vol.82, issue.2, pp.315-326, 1990.
DOI : 10.1007/BF00231251

D. Flieller, J. P. Louis, and J. Barrenscheen, General sampled data modeling of power systems supplied by static converter with digital and analog controller, Mathematics and Computers in Simulation, vol.46, issue.3-4, pp.373-385, 1998.
DOI : 10.1016/S0378-4754(97)00149-3

E. Galvan, A. Torralba, and L. G. Franquelo, A simple digital tachometer with high precision in a wide speed range, Proceedings of IECON'94, 20th Annual Conference of IEEE Industrial Electronics, pp.920-923, 1994.
DOI : 10.1109/IECON.1994.397911

E. Galvan, A. Torralba, and L. G. Franquelo, ASIC implementation of a digital tachometer with high precision in a wide speed range, IEEE Transactions on Industrial Electronics, vol.43, issue.6, pp.655-660, 1996.
DOI : 10.1109/41.544553

I. , G. Burrel, S. Le-ballois, and E. Monmasson, Robust pole placement for a Stirling co-generator, 2006.

M. Gautier, Contribution à la modélisation et à l'identification des robots, thèse d'état, 1990.

M. Gautier and W. Khalil, Direct calculation of minimum set of inertial parameters of serial robots, IEEE Transactions on Robotics and Automation, vol.6, issue.3, pp.368-373, 1990.
DOI : 10.1109/70.56655

M. Gautier, Numerical calculation of the base inertial parameters of robots, Proceedings., IEEE International Conference on Robotics and Automation, pp.1020-1025, 1990.
DOI : 10.1109/ROBOT.1990.126126

M. Gautier and P. Poignet, Identification non linéaire continue en boucle fermée des paramètres physiques de systèmes mécatroniques par modèle inverse et moindres carrés d'erreur d'entrée " , Journées d'identification et modélisation expérimentale, pp.28-44, 2001.

M. Gautier and P. Poignet, Identification en boucle fermée par modèle inverse et erreur d'entrée des paramètres physiques de systèmes mécatroniques, pp.465-480, 2002.

B. Gillespie and M. Cutkosky, Stable user-specific rendering of the virtual wall, Proceedings of the ASME International Mechanical Engineering Conference and Exposition, pp.397-406, 1996.

F. Giraud, B. Lemaire-semail, J. P. Hautier-applications, and E. Autriche, Model and control of a traveling wave ultrasonic motor Position control of a small traveling wave ultrasonic motor, 2001.

H. Gomi, Y. Koike, and M. Kawato, Human hand stiffness during discrete point-to-point multi-joint movement Développement d'outils d'aide à la conception d'organes de commande pour la téléopération à retour d'effort, Proceedings of the IEEE international conference on engineering in medicine and biology society, pp.1628-1629, 2000.

S. Gusia, F. Labrique, D. Grenier, H. Buyse, and P. Sente, Réflexions sur l'implantation numérique et l'analyse en temps discret de la commande vectorielle des machines à courant alternatif : une synthèse, Electronique du Futur, 2003.

W. Hagood, I. , and A. J. Mcfarland, Modeling of a piezoelectric rotary ultrasonic motor, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control, vol.42, issue.2, pp.210-224, 1995.
DOI : 10.1109/58.365235

A. Janot, C. Dtsi, and . Scri-/-lpr-/-05rt, Thèse sur la modélisation, identification et caractérisation des interfaces haptiques ? Identification d'une interface haptique : Premiers résultats, 2005.

A. Jemni, Estimation paramétrique des systèmes à représentation continue ? Application au Génie Electrique, Thèse de Doctorat, 1997.

R. E. Kalman, A New Approach to Linear Filtering and Prediction Problems, Journal of Basic Engineering, vol.82, issue.1, pp.34-45, 1960.
DOI : 10.1115/1.3662552

F. Khatounian, S. Moreau, J. P. Louis, E. Monmasson, F. Louveau et al., Modeling and simulation of a hybrid dynamic system used in haptic interfaces, Mathematics and Computers in Simulation, vol.71, issue.4-6, pp.270-281, 2006.
DOI : 10.1016/j.matcom.2006.02.021

F. Khatounian, A. Janot, S. Moreau, C. Bidard, E. Monmasson et al., PARAMETER IDENTIFICATION OF A SINGLE DEGREE OF FREEDOM HAPTIC INTERFACE, 14th IFAC Symposium on System Identification, p.2006, 2006.
DOI : 10.3182/20060329-3-AU-2901.00034

F. Khatounian, S. Moreau, E. Monmasson, A. Janot, and F. Louveau, Simultaneous Identification of the Initial Rotor Position and Electrical Parameters of a PMSM for a Haptic Interface, 2006 12th International Power Electronics and Motion Control Conference, 2006.
DOI : 10.1109/EPEPEMC.2006.283092

F. Khatounian, S. Moreau, E. Monmasson, A. Janot, and F. Louveau, Parameters Estimation of the Actuator used in Haptic Interfaces: Comparison of two Identification Methods, 2006 IEEE International Symposium on Industrial Electronics, 2006.
DOI : 10.1109/ISIE.2006.295594

F. Khatounian, S. Moreau, E. Monmasson, and F. Louveau, Speed Estimation Improvement After Decreasing the Encoder Resolution for a Haptic Interface, 2006 IEEE International Symposium on Industrial Electronics, 2006.
DOI : 10.1109/ISIE.2006.295617

W. Khalil and J. F. Kleinfinger, A new geometric notation for open and closed-loop robots, Proceedings. 1986 IEEE International Conference on Robotics and Automation, pp.1147-1180, 1986.
DOI : 10.1109/ROBOT.1986.1087552

W. Khalil and E. Dombre, Modeling, Identification and Control of Robots, Applied Mechanics Reviews, vol.56, issue.3, 2002.
DOI : 10.1115/1.1566397

K. H. Kim, H. S. Kim, and M. J. Youn, An improved stationary-frame-based current control scheme for a permanent-magnet synchronous motor, IEEE Transactions on Industrial Electronics, vol.50, issue.5, pp.1065-1068, 2003.

K. Kosuge, Y. Fujisawa, and T. Fukuda, Control Of Mechanical System With Man-machine Interaction, Proceedings of the IEEE/RSJ International Conference on Intelligent Robots and Systems, pp.87-92, 1992.
DOI : 10.1109/IROS.1992.587304

A. B. Kulkarni and M. Ehsani, A noval position sensor elimination technique for the interior permanent magnet synchronous motor drive, IEEE, Transactions on Industry Applications, pp.144-150, 1992.

P. De-larminat-e-Éd, ]. D. Parislaw93, and . Lawrence, Automatique : commande des systèmes linéaires Stability and transparency in bilateral teleoperation, IEEE Transactions on Robotics and Automation, vol.14, issue.9 5, pp.624-637, 1993.

D. A. Lawrence and J. D. , Performance trade-offs for hand controller design, Proceedings of the 1994 IEEE International Conference on Robotics and Automation, pp.295-302, 1994.
DOI : 10.1109/ROBOT.1994.351076

D. Lawrence, L. Pao, A. Dougherty, M. Salada, and Y. Pavlou, Rate-hardness: a new performance metric for haptic interfaces, IEEE Transactions on Robotics and Automation, vol.16, issue.4, pp.357-371, 2000.
DOI : 10.1109/70.864228

J. Lesenne, F. Notelet, G. Seguier-lavoisier, T. Doclim93, ]. K. Lim et al., Introduction à l'électrotechnique approfondie Observers for sensorless control of permanent magnet synchronous motor drive, Proceedings of the IFAC World Congress, pp.431-434, 1981.

J. P. Louis and C. Bergmann, Commande numérique, Convertisseur-moteur à courant continu, pp.1-30, 1995.

J. P. Louis and C. Bergmann, Commande numérique, systèmes triphasés : régime permanent, p.642, 1996.

J. P. Louis and C. Bergmann, Commande numérique, régimes intermédiaires et transitoires, p.643, 1997.

J. P. Louis and C. Bergmann, Commande numérique des machines synchrones, 1999.

J. N. Lygouras, K. A. Lalakos, and P. G. Tsalides, High-performance position detection and velocity adaptive measurement for closed-loop position control, IEEE Transactions on Instrumentation and Measurement, vol.47, issue.4, pp.978-985, 1998.
DOI : 10.1109/19.744653

J. Malaizé, J. Lévine, and R. Desailly, Estimation active de la phase initiale des moteurs synchrones, 2006.

D. W. Marquardt, An Algorithm for Least-Squares Estimation of Nonlinear Parameters, Journal of the Society for Industrial and Applied Mathematics, vol.11, issue.2, pp.431-441, 1963.
DOI : 10.1137/0111030

N. Marx, J. M. Alexandre, P. Pottier, C. Dtsi, and . Srsi-/-lems-/-02rt, Recherche et développement Haption ? Métrologie et mise en oeuvre d, 2002.

P. A. Millman, M. Stanley, and J. E. Colgate, Design of a high performance haptic interface to virtual environments, Proceedings of IEEE Virtual Reality Annual International Symposium, pp.216-222, 1993.
DOI : 10.1109/VRAIS.1993.380775

B. Miller, J. Colgate, and R. Freeman, Environment delay in haptic systems, Proceedings 2000 ICRA. Millennium Conference. IEEE International Conference on Robotics and Automation. Symposia Proceedings (Cat. No.00CH37065), pp.2434-2439, 2000.
DOI : 10.1109/ROBOT.2000.846392

S. Moreau, Contribution à la modélisation et à l'estimation paramétrique des machines électriques à courant alternatif : application au diagnostic, 1999.

F. Mussa-ivaldi, N. Hogan, and E. Bizzi, Neural, mechanical, and geometric factors subserving arm posture in humans, Journal of Neuroscience, vol.5, issue.10, pp.2732-2743, 1985.

G. Niemeyer and J. Slotine, Using wave variables for system analysis and robot control, Proceedings of International Conference on Robotics and Automation, pp.1619-1625, 1997.
DOI : 10.1109/ROBOT.1997.614372

G. Niemeyer and J. Slotine, Telemanipulation with Time Delays, The International Journal of Robotics Research, vol.23, issue.9, pp.873-890, 2004.
DOI : 10.1177/0278364904045563

G. Niemeyer, N. Diolaiti, N. Tanner, T. Noguchi, K. Yamada et al., Wave haptics: Encoderless virtual stiffnesses Initial rotor position estimation method of sensorless PM motor with no sensitivity to armature resistance, International symposium of robotics research, octobre 2005. [Nog98], pp.118-125, 1998.

S. Ogasawara, H. Agakiost96, ]. S. Ostlund, and M. Brokemper, An approach to real time position estimation at zero and low speed for a PM motor based on saliency Sensorless rotor-position detection from zero to rated speed for an integrated PM synchronous motor drive, Proceedings of the Industry Applications Society Annual Meeting, pp.29-35, 1996.

M. T. Pham, M. Gautier, and P. Poignet, Identification of joint stiffness with bandpass filtering, Proceedings 2001 ICRA. IEEE International Conference on Robotics and Automation (Cat. No.01CH37164), pp.2867-2872, 2001.
DOI : 10.1109/ROBOT.2001.933056

M. T. Pham, Contribution à la modélisation, l'identification et la commande de systèmes mécaniques à flexibilités localisées ? Application à des axes de machines-outils rapides, 2002.

P. Pillay and R. Krishnan, Modeling, simulation, and analysis of permanent-magnet motor drives. I. The permanent-magnet synchronous motor drive, IEEE Transactions on Industry Applications, vol.25, issue.2, pp.265-273, 1989.
DOI : 10.1109/28.25541

M. Prokin, Double buffered wide-range frequency measurement method for digital tachometers, IEEE Transactions on Instrumentation and Measurement, vol.40, issue.3, pp.606-610, 1991.
DOI : 10.1109/19.87027

J. Richalet, A. Rault, and R. Pouliquen, Identification des processus pour la méthode du modèle, Gordon and Breach, 1971.

J. , R. Hermès-parisros93, ]. L. Rosenberg, and B. D. Adelstein, Pratique de l'identification Perceptual decomposition of virtual haptic surfaces, IEEE Proceedings, Symposium on research frontiers, pp.46-53, 1991.

P. B. Schmidt, M. L. Gasperi, G. Ray, and A. H. Wijenayake, Initial rotor angle detection of a non-salient pole permanent magnet synchronous machine, Proceedings of the Industry Applications Society Annual Meeting, pp.459-463, 1997.

J. E. Speich, L. Shao, and M. Goldfarb, Modeling the human hand as it interacts with a telemanipulation system, Mechatronics, vol.15, issue.9, pp.1127-1142, 2005.
DOI : 10.1016/j.mechatronics.2005.06.001

M. A. Srinivasan and C. Basdogan, Haptics in virtual environments: Taxonomy, research status, and challenges, Computers & Graphics, vol.21, issue.4, pp.393-404, 1997.
DOI : 10.1016/S0097-8493(97)00030-7

N. Tanner and G. Niemeyer, Practical limitations of wave variable controllers in teleoperation, IEEE Conference on Robotics, Automation and Mechatronics, 2004., pp.1-3, 2004.
DOI : 10.1109/RAMECH.2004.1438886

E. Simon, Implementation of a speed field orientation control of 3-phase PMSM Motor using TMS320F240 " , Texas Instruments application report SPRA588, septembre 1999

J. C. Trigeassou, Estimation paramétrique de modèles continus Ecole d'été d'Automatique de Grenoble, tome 1, septembre 1996

T. Tsuji, K. Goto, M. Moritani, M. Kaneko, and P. Morasso, Spatial characteristics of human hand impedance in multi-joint arm movements, Proceedings of IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS'94), pp.423-430, 1994.
DOI : 10.1109/IROS.1994.407441

O. A. Vivas, Contribution à l'identification et à la commande des robots parallèles, thèse de doctorat, 2004.

E. Walter and L. Pronzato, Identification of parametric models from experimental data, Communications and Control Engineering Series, 1997.

J. Zaytoon, Les Systèmes Dynamiques Hybrides, 2001.

M. La and . Dans-le, cadre de cette application (figure A.1) est à pôles lisses. Il s'