C. A. Book, S. Dhayni, L. Mir, A. Rufer, and . Bounceur, On-chip Pseudorandom Testing for Linear and nonlinear MEMS. Selected to be published as a chapter, a book gathering the best papers from the VLSI-SoC 2005 Conference

J. S. Publications, L. Mir, A. Rufer, and . Dhayni, Built-In Self-Test techniques for MEMS, Microelectronics Journal

A. Dhayni, S. Mir, and L. Rufer, Mems built-in-self-test using MLS, Proceedings. Ninth IEEE European Test Symposium, 2004. ETS 2004., pp.66-71, 2004.
DOI : 10.1109/ETSYM.2004.1347607

URL : https://hal.archives-ouvertes.fr/hal-00005858

A. Dhayni, S. Mir, and L. Rufer, Evaluation of Impulse Response-Based BIST Techniques for MEMS in the Presence of Weak Nonlinearities, European Test Symposium (ETS'05), pp.82-87, 2005.
DOI : 10.1109/ETS.2005.21

URL : https://hal.archives-ouvertes.fr/hal-00012846

A. Dhayni, S. Mir, L. Rufer, and A. Bounceur, Pseudorandom Functional BIST for Linear and Nonlinear MEMS, Proceedings of the Design Automation & Test in Europe Conference, pp.664-669, 2006.
DOI : 10.1109/DATE.2006.244039

URL : https://hal.archives-ouvertes.fr/hal-00522093

O. Conferences, . Symposia, . A. Workshops, S. Dhayni, L. Mir et al., Nonlinearity effects on MEMS on-chip pseudorandom testing. 11 th IEEE International Mixed-Signals Testing Workshop, pp.224-233, 2005.

A. Dhayni, S. Mir, L. Rufer, and A. Bounceur, Autotest Intégré des Microsystèmes Nonlinéaires, 8ème Journées Nationales du Réseau Doctoral de Microélectronique, pp.256-258, 2005.

A. Bounceur, A. Dhayni, S. Mir, and L. Rufer, Génération de vecteurs de test pour les MEMS non linéaires pour le calcul des noyaux de Volterra, 8ème Journées Nationales du Réseau Doctoral de Microélectronique, pp.340-342, 2005.

A. Dhayni, S. Mir, L. Rufer, and A. Bounceur, On-chip Pseudorandom Testing for Linear and Nonlinear MEMS, Proceedings of IFIP International Conference on Very Large Scale Integration (IFIP VLSI-SOC 2005), pp.435-440, 2005.
DOI : 10.1007/978-0-387-73661-7_16

URL : https://hal.archives-ouvertes.fr/hal-00185934

S. Mir, L. Rufer, and A. Dhayni, Built-in-self-test techniques for MEMS, proceedings of the 1 st International Workshop on Advances in Sensors and Interfaces (IWASI), Invited talk, pp.34-38, 2005.
DOI : 10.1016/j.mejo.2006.04.016

URL : https://hal.archives-ouvertes.fr/hal-00091086

R. Leach, Z. Cui, and D. Flack, Standardisation for Microsystems Technology: The Way Forward Microsystems Technology Standarisation Roadmap, Project funded by the European Community under the 'Information Society Technologies' program, 2004.

R. Howe, R. Muller, K. Gabriel, and W. Trimmer, Silicon micromechanics: sensors and actuators on a chip, IEEE Spectrum, vol.27, issue.7, pp.29-31, 1990.
DOI : 10.1109/6.58424

W. Eaton, J. Smith, G. Monk, T. Brien, and . Miller, Comparison of Bulk and Surface-micromachined Pressure Sensors, Proceedings of SPIE, Micromachined Devices and Components IV, pp.431-438, 1998.

T. Lober and R. Howe, Surface-micromachining Processes for Electrostatic Microactuator Fabrication Technical Digest of Solid-State Sensor and Actuator Workshop, pp.59-62, 1988.

D. Koester, A. Cowen, R. Mahadevan, M. Stonefield, and B. Hardy, PolyMUMPs Design Handbook

V. Summit, Sandia's Silicon Surface Micromachining Technology, 2004.

H. Luo, G. Fedder, and L. Carley, A 1 mG lateral CMOS-MEMS accelerometer, Proceedings IEEE Thirteenth Annual International Conference on Micro Electro Mechanical Systems (Cat. No.00CH36308), pp.502-507, 2000.
DOI : 10.1109/MEMSYS.2000.838568

URL : http://repository.cmu.edu/cgi/viewcontent.cgi?article=1313&context=robotics

D. Hutchison, K. Ohara, and A. Takeda, Application of second generation advanced multimedia display processor (AMDP2) in a digital micro-mirror array based HDTV, ICCE. International Conference on Consumer Electronics (IEEE Cat. No.01CH37182), pp.294-295, 2001.
DOI : 10.1109/ICCE.2001.935316

R. S. Payne, S. Sherman, S. Lewis, and R. T. Howe, Surface micromachining: from vision to reality to vision [accelerometer], Proceedings ISSCC '95, International Solid-State Circuits Conference, pp.164-165, 1995.
DOI : 10.1109/ISSCC.1995.535506

A. Devices-inc, ADXL Series Accelerometer Datasheets

A. Kourepenis, J. Borenstein, J. Connelly, R. Elliott, P. Ward et al., Performance of MEMS Inertial Sensors, Position Location and Navigation Symposium, pp.1-8, 1998.

K. B. Lam, C. Mu, and L. Liwei, A micro photosynthetic electrochemical cell, The Sixteenth Annual International Conference on Micro Electro Mechanical Systems, 2003. MEMS-03 Kyoto. IEEE, pp.391-394, 2003.
DOI : 10.1109/MEMSYS.2003.1189768

X. Tao, W. Guoying, Z. Guobing, W. Wei, and L. Ting, A novel micro gas sensor with high selectivity based on both mass and conductivity measurement, Proceedings IEEE Thirteenth Annual International Conference on Micro Electro Mechanical Systems (Cat. No.00CH36308), pp.108-113, 2000.
DOI : 10.1109/MEMSYS.2000.838499

. Micronews, The Yole développement magazine for semiconductors, MEMS, nanotechnology, life science, instrumentation and optics, 2005.

S. Hurst, VLSI TESTING, digital and mixed analogue/digital techniques, IEE publishing
DOI : 10.1049/PBCS009E

M. Ohletz, T. Williams, and J. Mucha, Overhead in scan and self-testing designs, Proceedings IEEE International Test Conference, pp.460-470, 1987.

E. J. Mccluskey, Built-In Self-Test Techniques, IEEE Design & Test of Computers, vol.2, issue.2, pp.21-28, 1985.
DOI : 10.1109/MDT.1985.294856

E. J. Mccluskey, Built-In Self-Test Techniques, IEEE Design & Test of Computers, vol.2, issue.2, pp.29-36, 1985.
DOI : 10.1109/MDT.1985.294856

B. Bennetts, Boundary-scan Standards, Tutorial in 9th European Test Symposium, 2004.

S. Sunter and N. Nagi, Test metrics for analog parametric faults, Proceedings 17th IEEE VLSI Test Symposium (Cat. No.PR00146), pp.226-234, 1999.
DOI : 10.1109/VTEST.1999.766670

A. Zjajo, J. Gyvez, and G. Gronthoud, A quasi-static approach for detection and simulation of parametric faults in analog and mixed-signal circuits, proceedings of 11th International Mixed-signals Testing Workshop, pp.155-164, 2005.

K. Saab, N. Ben-hamida, and B. Kaminska, Parametric fault simulation and Test vector generation, pp.650-656, 2000.
DOI : 10.1109/date.2000.840855

URL : http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.13.2652

C. Y. Pan and K. T. Cheng, Pseudo-random testing and signature analysis for mixed-signal circuits, Proceedings of IEEE International Conference on Computer Aided Design (ICCAD), pp.102-107, 1995.
DOI : 10.1109/ICCAD.1995.479999

URL : http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.434.8124

L. Milor and A. Sangiovanni-vincentelli, Minimizing production test time to detect faults in analog circuits, IEEE transactions on CAD of ICs and Systems, pp.987-988, 1994.
DOI : 10.1109/43.285252

W. Lindermeir, H. Graeb, and K. Antreich, Design based analog testing by characteristic observation inference, Proceedings of IEEE International Conference on Computer Aided Design (ICCAD), pp.903-912, 1995.
DOI : 10.1109/ICCAD.1995.480193

URL : http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.547.3344

S. Sunter, A low cost 100 MHz analog test bus, Proceedings 13th IEEE VLSI Test Symposium, pp.60-65, 1995.
DOI : 10.1109/VTEST.1995.512618

B. Han, Analysis of a Modified Data Test Set by the Use of Generating Functions, IEEE Transactions on Communications, vol.22, issue.10, pp.1706-1710, 1974.
DOI : 10.1109/TCOM.1974.1092088

T. Hsu, Packaging design of microsystems and meso-scale devices, IEEE Transactions on Advanced Packaging, vol.23, issue.4, pp.596-601, 2000.
DOI : 10.1109/6040.883747

M. J. Ohletz, Hybrid Built-in self-test (HBIST) for mixed analogue-digital integrated circuit, Proceedings of the European Test Conference, pp.307-316, 1991.

A. Bounceur, S. Mir, L. Rolíndez, and E. Simeu, On the accurate estimation of test metrics for multiple analogue parametric deviations, Proceedings of 12 th IMSTW'06, pp.19-26, 2006.
URL : https://hal.archives-ouvertes.fr/hal-00142367

C. Y. Pan and K. T. Cheng, Implicit functional testing for analog circuits, Proceedings of IEEE VLSI Test Symposium, pp.489-494, 1996.

C. Y. Pan and K. T. Cheng, Pseudo-random testing for mixed-signal circuits, IEEE transactions on Computer aided design of integrated circuits and systems, vol.16, issue.10, pp.1173-1185, 1997.

M. Ohletz, Realistic faults mapping scheme for the fault simulation of integrated analog CMOS circuits, Proceedings of International Test Conference, pp.776-785, 1996.

T. Mukherjee, S. Iyer, and G. K. Fedder, Optimization-based synthesis of microresonators, Sensor and Actuators A, pp.118-127, 1998.
DOI : 10.1016/S0924-4247(98)00134-4

P. N. Variyam, A. Chatterjee, and N. Nagi, Low-coast and efficient digital-compatible BIST for analog circuits using pulse response sampling, Proceedings of IEEE VLSI Test Symposium, pp.261-266, 1997.

P. N. Variyam and A. Chatterjee, Digital-compatible BIST for analog circuits using transient response sampling, IEEE Design & Test of Computers, vol.17, issue.3, pp.106-115, 2000.
DOI : 10.1109/54.867901

A. Frisch and T. Almy, HABIST: histogram-based analog built in self test, Proceedings International Test Conference 1997, pp.760-767, 1997.
DOI : 10.1109/TEST.1997.639689

J. Turino, Built-in self-test stream lines testing of mixed-signals SoCs, Electronic Design, pp.67-74, 2001.

J. Torino, Reducing mixed-signal SoC test costs using BIST, Proceedings of IEEE International Mixed-Signal Test Workshop, pp.103-107, 2001.

A. M. Brosa and J. Figueras, Digital signature proposal for mixed-signal circuits, Proceedings International Test Conference 2000 (IEEE Cat. No.00CH37159), pp.385-393, 2001.
DOI : 10.1109/TEST.2000.894317

K. Arabi and B. Kaminska, Oscillation-test strategy for analog and mixed-signal integrated circuits, Proceedings of 14th VLSI Test Symposium, pp.476-482, 1996.
DOI : 10.1109/VTEST.1996.510896

K. Arabi and B. Kaminska, Testing analog and mixed-signal integrated circuits using oscillation-test method, IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems, vol.16, issue.7, pp.745-753, 1997.
DOI : 10.1109/43.644035

K. Arabi and B. Kaminska, Design for testability of embedded integrated operational amplifiers, IEEE Journal of Solid-State Circuits, vol.33, issue.4, pp.573-581, 1998.
DOI : 10.1109/4.663562

K. Arabi and B. Kaminska, Oscillation-test methodology for low-cost testing of active analog filters, IEEE Transactions on Instrumentation and Measurement, vol.48, issue.4, pp.798-806, 1999.
DOI : 10.1109/19.779176

G. Huertas, D. Vazquez, E. J. Peralias, A. Rueda, and J. L. Huertas, Effective oscillation-based test for application to a DTMF filter bank, International Test Conference 1999. Proceedings (IEEE Cat. No.99CH37034), pp.549-555, 1999.
DOI : 10.1109/TEST.1999.805779

G. Huertas, D. Vazquez, E. J. Peralias, E. J. Peralias, A. Rueda et al., Practical oscillation-based test of integrated filters, IEEE Design & Test of Computers, vol.19, issue.6, pp.64-72, 2002.
DOI : 10.1109/MDT.2002.1047745

S. Mir, B. Charlot, and B. Courtois, Extending fault-based testing to microelectromechanical systems, European Test Workshop 1999 (Cat. No.PR00390), pp.279-288, 2000.
DOI : 10.1109/ETW.1999.804234

URL : https://hal.archives-ouvertes.fr/hal-00007872

D. Vazquez, A. Rueda, and J. L. Huertas, A new strategy for testing analog filters, Proceedings of IEEE VLSI Test Symposium, pp.36-41, 1994.
DOI : 10.1109/VTEST.1994.292337

L. Carro and M. Negreiros, Efficient analog test methodology based on adaptive algorithms, Proceedings of the 35th annual conference on Design automation conference , DAC '98, pp.32-37, 1998.
DOI : 10.1145/277044.277051

A. Chatterjee, Concurrent error detection abd fault-tolerance in linear analog circuits using continuous checksums, IEEE transactions on Very Large Scale Integration Systems, pp.138-150, 2003.

T. Jiang and R. D. Blanton, Particulate failures for surface-micromachined MEMS, International Test Conference 1999. Proceedings (IEEE Cat. No.99CH37034), pp.329-337, 1999.
DOI : 10.1109/TEST.1999.805647

A. Hartzell and D. Woodila, Reliability methodology for prediction of micromachined accelerometer stiction, 1999 IEEE International Reliability Physics Symposium Proceedings. 37th Annual (Cat. No.99CH36296), pp.202-205, 1999.
DOI : 10.1109/RELPHY.1999.761613

A. Kolpekwar, R. D. Blanton, and D. Woodilla, Failure modes for stiction in surface-micromachined MEMS, Proceedings International Test Conference 1998 (IEEE Cat. No.98CH36270), pp.551-556, 1998.
DOI : 10.1109/TEST.1998.743198

A. Castillejo, D. Veychard, S. Mir, J. M. Karam, and B. Courtois, Failure mechanisms and fault classes for CMOS- Compatible microelectro-mechanical systems, Proceedings of the ITC, pp.541-550, 1998.
DOI : 10.1109/test.1998.743197

A. Lapadatu, H. Jakobsen, and R. Puers, A new concept for a self-testable pressure sensor based on the bimetal effect, 10 th International Conference on Solid-State Sensors and Actuators, 1999.
DOI : 10.1016/S0924-4247(99)00311-8

G. K. Fedder and Q. Jing, A hierarchical circuit-level design methodology for microelectromechanical systems, IEEE Transactions on Circuits and Systems II: Analog and Digital Signal Processing, vol.46, issue.10, pp.1309-1315, 1999.
DOI : 10.1109/82.799682

P. Durr, U. Dauderstadt, D. Kunze, M. Auvert, and H. Lakner, Reliability test and failure analysis of optical MEMS, Proceedings of the 9th International Symposium on the Physical and Failure Analysis of Integrated Circuits (Cat. No.02TH8614), pp.201-206, 2002.
DOI : 10.1109/IPFA.2002.1025660

H. G. Kerkhoff and M. Acar, Testable design and testing of micro-electro-fluidic arrays, Proceedings. 21st VLSI Test Symposium, 2003., pp.403-409, 2003.
DOI : 10.1109/VTEST.2003.1197681

H. G. Kerkhoff and M. Acar, Electronic test solutions for FlowFET fluidic arrays, Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS 2003., pp.27-32, 2003.
DOI : 10.1109/DTIP.2003.1287003

H. G. Kerkhoff, Testing of a microanalysis system, IEEE Transactions on Instrumentation and Measurement, vol.50, issue.6, pp.1485-1489, 2001.
DOI : 10.1109/19.982932

F. Su, S. Ozev, and K. Chakrabarty, Testing of Droplet-based Microelectrofluidic Systems, Proceedings of International Test Conference, pp.1192-1200, 2003.

F. Su, S. Ozev, and K. Chakrabarty, Concurrent testing of droplet-based microfluidic systems for multiplexed biomedical assays, 2004 International Conferce on Test, 2004.
DOI : 10.1109/TEST.2004.1387352

V. Beroulle, Y. Bertrand, L. Latorre, and P. Nouet, Test and Testability of a Monolithic MEMS for Magnetic Field Sensing, Journal of Electronic Testing Theory and Applications, pp.439-450, 2001.
URL : https://hal.archives-ouvertes.fr/hal-00378525

B. C. Kim and K. Marella, A novel test methodology for MEMS magnetic micromotors, Proceedings 17th IEEE VLSI Test Symposium (Cat. No.PR00146), pp.284-289, 1999.
DOI : 10.1109/VTEST.1999.766677

D. M. Tanner, J. A. Walraven, K. S. Helgesen, L. W. Irwin, D. L. Gregory et al., MEMS reliability in a vibration environment, 2000 IEEE International Reliability Physics Symposium Proceedings. 38th Annual (Cat. No.00CH37059), pp.139-145, 2000.
DOI : 10.1109/RELPHY.2000.843904

D. M. Tanner, J. A. Walraven, K. S. Helgesen, L. W. Irwin, F. Brown et al., MEMS reliability in shock environments, 2000 IEEE International Reliability Physics Symposium Proceedings. 38th Annual (Cat. No.00CH37059), pp.129-138, 2000.
DOI : 10.1109/RELPHY.2000.843903

V. Beroulle, Y. Bertrand, L. Latorre, and P. Nouet, Evaluation of the oscillation-based test methodology for micro-electro-mechanical systems, Proceedings 20th IEEE VLSI Test Symposium (VTS 2002), pp.439-444, 2002.
DOI : 10.1109/VTS.2002.1011177

URL : https://hal.archives-ouvertes.fr/lirmm-00268484

V. Beroulle, Y. Bertrand, L. Latorre, and P. Nouet, On the use of an Oscillation-based Test Methodology for CMOS Microelectro-mechanical Systems, Proceedings of Design, Automation and Test in Europe, p.1120, 2002.

B. Charlot, S. Mir, E. F. Cota, M. Lubaszewski, and B. Courtois, Fault simulation of MEMS using HDLs, Design, Test, and Microfabrication of MEMS and MOEMS, pp.70-77, 1999.
DOI : 10.1117/12.341215

URL : https://hal.archives-ouvertes.fr/hal-00012870

B. Charlot, S. Mir, E. F. Cota, M. Lubaszewski, and B. Courtois, Fault modeling of suspended thermal MEMS, International Test Conference 1999. Proceedings (IEEE Cat. No.99CH37034), pp.319-328, 1999.
DOI : 10.1109/TEST.1999.805646

URL : https://hal.archives-ouvertes.fr/hal-00007871

B. Charlot, S. Moussouris, S. Mir, and B. Courtois, Fault modeling of electrostatic comb-drives for MEMS, Design, Test, and Microfabrication of MEMS and MOEMS, pp.398-405, 1999.
DOI : 10.1117/12.341226

URL : https://hal.archives-ouvertes.fr/hal-00013030

N. Deb and R. D. Blanton, High-Level Fault Modeling in Surface-Micromachined MEMS, Proceedings of Design, Test, Integration, and Packaging of MEMS/MOEMS, pp.228-235, 2000.
DOI : 10.1117/12.382298

N. Deb and R. D. Blanton, High-Level Fault Modeling in Surface-Micromachined MEMS, Analog Integrated Circuits and Signal Processing, vol.29, issue.1/2, pp.151-158, 2001.
DOI : 10.1023/A:1011246717740

N. Deb and R. D. Blanton, Analysis of failure sources in surface-micromachined MEMS, Proceedings International Test Conference 2000 (IEEE Cat. No.00CH37159), pp.739-749, 2000.
DOI : 10.1109/TEST.2000.894270

N. Deb, S. V. Iyer, T. Mukherjee, and R. D. Blanton, MEMS Resonator Synthesis for Defect Reduction, Journal of Modeling and Simulation of Microsystems, vol.2, issue.1, pp.11-20, 2001.
DOI : 10.1117/12.341153

N. Deb, S. V. Iyer, T. Mukherjee, and R. D. Blanton, MEMS resonator synthesis for testability, Design, Test, and Microfabrication of MEMS and MOEMS, pp.58-69, 1999.
DOI : 10.1117/12.341153

L. Rolíndez, S. Mir, A. Bounceur, and J. L. Carbonero, A digital BIST for a 16-bit audio ?? analogue-to-digital converter, 11 th IEEE International Mixed-Signals Testing Workshop, pp.45-52, 2005.

T. Maudie, A. Hardt, R. Nielsen, D. Stanerson, R. Bleschke et al., Mems manufacturing testing: an accelerometer case study, International Test Conference, 2003. Proceedings. ITC 2003., pp.843-849, 2003.
DOI : 10.1109/TEST.2003.1271069

URL : http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.194.5533

T. Maudie and J. Wertz, Pressure sensor performance and reliability, IEEE Industry Applications Magazine, vol.3, issue.3, pp.37-43, 1997.
DOI : 10.1109/2943.589894

A. Hartzell and D. Woodilla, Reliability methodology for prediction of micromachined accelerometer stiction, 1999 IEEE International Reliability Physics Symposium Proceedings. 37th Annual (Cat. No.99CH36296), pp.202-205, 1999.
DOI : 10.1109/RELPHY.1999.761613

A. Kolpekwar, R. D. Blanton, and D. Woodilla, Failure modes for stiction in surface-micromachined MEMS, Proceedings International Test Conference 1998 (IEEE Cat. No.98CH36270), pp.551-556, 1998.
DOI : 10.1109/TEST.1998.743198

A. Kolpekwar, C. Kellen, and R. D. Blanton, MEMS fault model generation using CARAMEL, Proceedings International Test Conference 1998 (IEEE Cat. No.98CH36270), pp.557-566, 1998.
DOI : 10.1109/TEST.1998.743199

A. Kolpekwar, T. Jiang, and R. D. Blanton, CARAMEL: Contamination And Reliability Analysis of MicroElectromechanical Layout, Journal of Microelectromechanical Systems, vol.8, issue.3, pp.309-318, 1999.
DOI : 10.1109/84.788635

T. Jiang and R. D. Blanton, Particulate failures for surface-micromachined MEMS, International Test Conference 1999. Proceedings (IEEE Cat. No.99CH37034), pp.329-337, 1999.
DOI : 10.1109/TEST.1999.805647

T. Jiang, C. Kellon, and R. D. Blanton, Inductive Fault Analysis of a Microresonator, Proceedings of Modeling and Simulation of Microsystems, pp.498-501, 1999.

L. Zimmermann, J. P. Ebersohl, F. Le-hung, J. P. Berry, F. Baillieu et al., Airbag application: a microsystem including a silicon capacitive accelerometer, CMOS switched capacitor electronics and true self-test capability, Sensors and Actuators A: Physical, vol.46, issue.1-3, pp.190-195, 1995.
DOI : 10.1016/0924-4247(94)00888-O

G. Huertas, D. Vazquez, A. Rueda, and J. L. Huertas, Effective oscillation-based test for application to a DTMF filter back, Proceedings of International Test Conference, pp.549-555, 1999.

D. Bruyker, A. Cozma, and R. Puers, A combined piezoresistive/capacitive pressure sensor with self-test function based on thermal actuation, Proceedings of Solid State Sensors and Actuators, pp.1461-1464, 1997.
DOI : 10.1016/S0924-4247(97)01718-4

H. V. Allen, S. C. Terry, and D. W. De-bruin, Self-testable accelerometer systems, IEEE Micro Electro Mechanical Systems, , Proceedings, 'An Investigation of Micro Structures, Sensors, Actuators, Machines and Robots', pp.113-115, 1989.
DOI : 10.1109/MEMSYS.1989.77973

B. Charlot, S. Mir, F. Parrain, and B. Courtois, Electrically induced stimuli for MEMS self-test, Proceedings 19th IEEE VLSI Test Symposium. VTS 2001, pp.210-215, 2001.
DOI : 10.1109/VTS.2001.923441

URL : https://hal.archives-ouvertes.fr/hal-00007849

B. Charlot, S. Mir, F. Parrain, and B. Courtois, Generation of Electrically Induced Stimuli for MEMS Self-Test, Journal of Electronic Testing Theory and Applications, pp.459-470, 2001.
URL : https://hal.archives-ouvertes.fr/hal-00007841

T. Olbrich, A. M. Richardson, and D. Bradley, Built-in self-test and diagnostic support for safety critical microsystems, Microelectronics Reliability, vol.36, issue.7-8, pp.1125-1136, 1996.
DOI : 10.1016/0026-2714(96)00035-2

R. Rosing, A. Lechner, A. Richardson, and A. Dorey, Fault simulation and modelling of microelectromechanical systems, Computing & Control Engineering Journal, vol.11, issue.5, pp.242-250, 2000.
DOI : 10.1049/cce:20000505

M. Aikele, K. Bauer, W. Ficker, F. Neubauer, U. Prechtel et al., Resonant accelerometer with self-test, Sensors and Actuators A: Physical, vol.92, issue.1-3, pp.161-167, 2001.
DOI : 10.1016/S0924-4247(01)00558-1

R. Puers and S. Reyntjens, RASTA???real-acceleration-for-self-test accelerometer: a new concept for self-testing accelerometers, Sensors and Actuators A: Physical, vol.97, issue.98, pp.97-98, 2002.
DOI : 10.1016/S0924-4247(02)00023-7

N. Deb and R. D. Blanton, Built-in self test of CMOS-MEMS accelerometers, Proceedings. International Test Conference, pp.1075-1084, 2002.
DOI : 10.1109/TEST.2002.1041864

N. Deb, Defect Oriented Test of Inertial Microsystems, 2005.

X. Xiong, Y. L. Wu, and W. B. Jone, A Dual-Mode Built-in Self-Test Technique for Capacitive MEMS Devices, Proceedings of VLSI Test Symposium, pp.148-153, 2004.
DOI : 10.1109/TIM.2005.855094

R. Rosing, A. Lechner, A. Richardson, and A. Dorey, Fault Simulation and Modelling of Microelectromechanical Systems Special Feature ? Intelligent Sensors, IEE Computing & Control Engineering Journal, pp.175-181, 2000.

N. Dumas, F. Azaïs, L. Latorre, and P. Nouet, Electrically-induced thermal stimuli for MEMS testing, 9th IEEE European Test Symposium, pp.60-65, 2004.
DOI : 10.1109/etsym.2004.1347605

URL : https://hal.archives-ouvertes.fr/lirmm-00108904

W. C. Tang, T. H. Nguyen, M. W. Judy, and R. T. Howe, Electrostatic-comb drive of lateral polysilicon resonators, Sensors and Actuators A: Physical, vol.21, issue.1-3, pp.328-331, 1990.
DOI : 10.1016/0924-4247(90)85065-C

T. Mukherjee, MEMS Design and Verification, Proceedings of International Test Conference, pp.681-690, 2003.

K. Arabi and B. Kaminska, Parametric and catastrophic fault coverage of analog circuits in oscillation-test methodology, Proceedings. 15th IEEE VLSI Test Symposium (Cat. No.97TB100125), pp.166-171, 1997.
DOI : 10.1109/VTEST.1997.600246

G. M. Rebeiz, RF MEMS Theory, Design, and Technology, 2003.

H. S. Newman, RF MEMS switches and applications, 2002 IEEE International Reliability Physics Symposium. Proceedings. 40th Annual (Cat. No.02CH37320), pp.111-115, 2002.
DOI : 10.1109/RELPHY.2002.996618

J. Denatale, R. Mihailovich, and J. Waldrop, Techniques for reliability analysis of MEMS RF switch, 2002 IEEE International Reliability Physics Symposium. Proceedings. 40th Annual (Cat. No.02CH37320), pp.116-117, 2002.
DOI : 10.1109/RELPHY.2002.996620

S. Melle, analyse et modélisation des phénomènes de chargement de diélectriques dans les MEMS RF : Application à la fiabilité prédictive de micro-commutateurs électromécaniques micro-ondes, 2005.

I. , D. Wolf, and W. M. Van-spengen, Techniques to study the reliability of metal RF MEMS capacitive switches, Microelectronics and Reliability, issue.42, pp.1789-1794, 2002.

M. Van-spengen, R. Puers, R. Mertens, and I. Wolf, Experimental characterization of stiction due to charging in RF MEMS, Digest. International Electron Devices Meeting,, pp.901-904, 2002.
DOI : 10.1109/IEDM.2002.1175982

A. Margomenos and L. Katehi, Fabrication and accelerated hermiticity testing of an on-wafer package for RF MEMS, IEEE Transactions on Microwave Theory and Techniques, vol.52116, issue.6, pp.1626-1636, 2004.

S. D. Senturia, Microsystem Design, 2003.

U. Kac, F. Novak, S. Macek, and M. S. Zarnik, Alternative test methods using IEEE 1149, Proceeding of Design, Automation and Test in Europe Conference and Exhibition, pp.463-467, 2000.

U. Kac, Implementation of a switched capacitor filter with oscillation-based switch capability, 1999.

N. Deb and R. D. Blanton, Analysis of failure sources in surface-micromachined MEMS, Proceedings International Test Conference 2000 (IEEE Cat. No.00CH37159), pp.739-749, 2002.
DOI : 10.1109/TEST.2000.894270

M. R. Schroeder, Integrated???impulse method measuring sound decay without using impulses, The Journal of the Acoustical Society of America, vol.66, issue.2, pp.497-500, 1979.
DOI : 10.1121/1.383103

C. Dunn and M. O. Hawksford, Distortion Immunity of MLS-Derived Impulse Response Measurements, Journal of Audio Engineering Society, 1993.

D. D. Rife and J. Vanderkooy, Transfer Function Measurement with Maximum-Length Sequences, Journal of Audio Engineering Society, vol.37, 1989.

J. Borish and J. B. Angell, An efficient algorithm for measuring the impulse response using pseudorandom noise, Journal of Audio Engineering Society, 1983.

W. D. Davies, Generation and properties of maximum length sequences, Control, 1966.

G. Stan, J. Embrechts, and D. Archambeau, Comparison of Different Impulse Response Measurement Techniques, Journal of Audio Engineering Society, vol.50, pp.249-262, 2002.

M. Vorlander and M. Kob, Practical aspects of MLS measurements in building acoustics, Applied Acoustics, vol.52, issue.3-4, 1997.
DOI : 10.1016/S0003-682X(97)00029-7

C. Bleakley and R. Scaife, ???sequence correlation technique, The Journal of the Acoustical Society of America, vol.97, issue.2, 1995.
DOI : 10.1121/1.412176

D. Rife, Modulation Transfer Function Measurement with Maximum-Length Sequences, Journal of Audio Engineering Society, vol.40, issue.10, 1992.

J. Vanderkooy, Aspects of MLS Measuring Systems, Journal of Audio Engineering Society, vol.42, issue.4, 1994.

H. Alrutz and M. R. Schroeder, A fast Hadamard transform method for the evaluation of measurements using pseudorandoom test signals, Proceedings of 11 th International Congress on Acoustics, pp.235-238, 1983.

N. Ream, Nonlinear identification using Inverse-Repeat m sequences, Proceedings IEE, vol.117, pp.213-218, 1970.

P. A. Briggs and K. R. Godfrey, Pseudorandom signals for the dynamic analysis of multivariable systems, Proceedings of the Institution of Electrical Engineers, vol.113, issue.7, pp.1259-1267, 1966.
DOI : 10.1049/piee.1966.0213

N. Aoshima, Computer???generated pulse signal applied for sound measurement, The Journal of the Acoustical Society of America, vol.69, issue.5, pp.1484-1488, 1981.
DOI : 10.1121/1.385782

Y. Suzuki, F. Asano, H. Y. Kim, and T. Sone, An optimum computer???generated pulse signal suitable for the measurement of very long impulse responses, The Journal of the Acoustical Society of America, vol.97, issue.2, pp.1119-1123, 1995.
DOI : 10.1121/1.412224

A. Farina, Simultaneous measurement of impulse response and distortion with a swept-sine technique " , 108 th AES Convention, Journal of Audio Engineering Society (Abstracts), vol.48, p.350

A. Berkhout, M. Boone, and C. Kesselman, Acoustic Impulse Response Measurement: A New Technique, Journal of Audio Engineering Society, vol.32, issue.10, 1984.

S. Müller and P. Massarani, Transfer function measurement with sweeps, Journal of Audio Engineering Society, vol.49, issue.6, pp.443-471, 2001.

C. Y. Pan and K. T. Cheng, Pseudo-random testing and signature analysis for mixed-signal circuits, Proceedings of IEEE International Conference on Computer Aided Design (ICCAD), pp.102-107, 1995.
DOI : 10.1109/ICCAD.1995.479999

URL : http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.434.8124

C. Y. Pan and K. T. Cheng, Implicit functional testing for analog circuits, Proceedings IEEE VLSI Test Symposium, pp.489-494, 1996.

C. Y. Pan and K. T. Cheng, Pseudo-random testing for mixed-signal circuits, IEEE transactions On Computer aided design of integrated circuits and systems, vol.16, issue.10, pp.1173-1185, 1997.

L. Rufer, S. Mir, E. Simeu, and C. Domingues, On-Chip Pseudorandom MEMS Testing, Proceedings of 9 th International Mixed-Signal Testing Workshop (IMSTW'03), 2003.
DOI : 10.1007/s10836-005-6353-9

URL : https://hal.archives-ouvertes.fr/hal-00012850

A. Dhayni, S. Mir, and L. Rufer, Mems built-in-self-test using MLS, Proceedings. Ninth IEEE European Test Symposium, 2004. ETS 2004., pp.66-71, 2004.
DOI : 10.1109/ETSYM.2004.1347607

URL : https://hal.archives-ouvertes.fr/hal-00005858

H. R. Simpson, Statistical properties of a class of pseudorandom sequences, Proceedings of the Institution of Electrical Engineers, vol.113, issue.12, pp.2075-2080, 1966.
DOI : 10.1049/piee.1966.0361

J. Vanderkooy, Aspects of MLS measuring systems, " presented at the 93 rd Convention of Audio Engineering Society, 1992.

S. W. Golomb, Shift register sequences, 1967.
DOI : 10.1142/9361

V. Volterra, Theory of functionals, 1959.

L. Rufer, C. Domingues, and S. Mir, Behavioural modelling and simulation of a MEMS-based ultrasonic pulse-echo system, Proceedings of the Design, Test, Integration and Packaging of MEMS/MOEMS, pp.171-182, 2002.
URL : https://hal.archives-ouvertes.fr/hal-00012877

F. Corsi, C. Marzocca, and G. Matarrese, Defining a BIST-oriented signature for mixed-signal devices, Southwest Symposium on Mixed-Signal Design, 2003., pp.202-207, 2003.
DOI : 10.1109/SSMSD.2003.1190427

R. D. Nowak and B. D. Van-veen, Random and pseudorandom inputs for Volterra filter identification, IEEE Transactions on Signal Processing, vol.42, issue.8, pp.2124-2134, 1994.
DOI : 10.1109/78.301847

A. Dhayni, S. Mir, and L. Rufer, Evaluation of Impulse Response-Based BIST Techniques for MEMS in the Presence of Weak Nonlinearities, European Test Symposium (ETS'05), pp.82-87, 2005.
DOI : 10.1109/ETS.2005.21

URL : https://hal.archives-ouvertes.fr/hal-00012846

J. Vuolevi, Analysis, measurement and cancellation of the bandwidth and amplitude dependence of intermodulation distortion in RF power amplifiers, 2001.

M. J. Reed and M. O. Hawksford, Practical modeling of nonlinear audio systems using the Volterra series, " presented at the 100 th convention of the Audio Engineering Society, 1996.

M. J. Reed and M. O. Hawksford, Identification of discrete Volterra series using maximum length sequences, IEE Proceeding of Circuits, Devices and Systems, pp.241-248, 1996.
DOI : 10.1049/ip-cds:19960726

F. J. Macwilliams and N. J. Sloane, Pseudo-random sequences and arrays, Proceedings of the IEEE, vol.64, issue.12, pp.1715-1729, 1976.
DOI : 10.1109/PROC.1976.10411

Y. W. Lee and M. Schetzen, Measurement of the Wiener kernels of a nonlinear system by crosscorrelation, International Journal on Control, issue.23, pp.237-254, 1965.

Y. Shi and K. E. Hecox, Nonlinear system indentification by m-pulse sequences: Application to brainstem auditory evoked responses, IEEE Transactions on Biomedical Engineering, vol.34, pp.834-845, 1991.
DOI : 10.1109/10.83603

B. Wahlberg, System identification using Laguerre models, IEEE Transactions on Automatic Control, vol.36, issue.5, pp.551-561, 1991.
DOI : 10.1109/9.76361

J. W. Brewer, Kronecker products and matrix calculus in system theory, IEEE Transactions, pp.772-781, 1978.

G. Favier, A. Y. Kibangou, and A. Khouaja, Nonlinear system modelling by means of Volterra models. Approaches for parametric complexity reduction, Symposium Techniques Avancées et Stratégies Innovantes en Modélisation et Commandes Robustes des Processus Industriels, pp.21-22, 2004.

V. Kolarik, M. Lubaszewski, and B. Courtois, Towards Self-Checking Mixed-Signal Integrated Circuits, IEEE proceedings of European Solid-State Circuits Conference, pp.202-205, 1993.
URL : https://hal.archives-ouvertes.fr/hal-00007943

B. Vinnakota and R. Harjani, The design of analog self-checking circuits, Proceedings of 7th International Conference on VLSI Design, pp.67-70, 1994.
DOI : 10.1109/ICVD.1994.282658

S. Mir, M. Lubaszewski, V. Kolarik, and B. Courtois, Analogue On-Line/Off-Line Test Unification for Fully Differential Circuits, IEEE proceedings of International Mixed-Signal Testing Workshop, pp.56-61, 1995.
URL : https://hal.archives-ouvertes.fr/hal-01215554

S. Mir, M. Lubaszewski, and B. Courtois, Unified built-in self-test for fully differential analog circuits, Journal of Electronic Testing, vol.19, issue.6, pp.135-151, 1996.
DOI : 10.1007/BF00137570

URL : https://hal.archives-ouvertes.fr/hal-00008177

M. Lubaszewski, S. Mir, V. Kolarik, C. Nielsen, and B. Courtois, Design of self-checking fully differential circuits and boards, IEEE transactions on Very Large Scale Integration Systems, pp.113-128, 2000.
DOI : 10.1109/92.831432

URL : https://hal.archives-ouvertes.fr/hal-00013025

S. Mir, M. Lubaszewski, V. Kolarik, and B. Courtois, Fault-based testing and diagnosis of balanced filters, Analog Integrated Circuits and Signal Processing, vol.11, issue.1, pp.5-19, 1996.
DOI : 10.1007/BF00174235

URL : https://hal.archives-ouvertes.fr/hal-00008175

A. Bounceur, Plateforme CAO pour le test de circuits mixtes, 2006.
URL : https://hal.archives-ouvertes.fr/hal-00521998