J. Abadie, Etude et réalisation de micro-actionneurs intégrésintégrés`intégrésà base l'alliagè a mémoire de forme, Thèse de doctorat, 2000.

J. Agnus, ContributionàContribution`Contributionà la micromanipulation : ´ etude, réalisation, caractérisation et commande d'une micropince piézoélectrique, Thèse de doctorat, 2003.

J. Agnus, P. De-lit, C. Clévy, and N. Chaillet, Description and performances of a four-degrees-of-freedom piezoelectric microgripper, International Symposium on Assembly and Task Planning, pp.66-71, 2003.

J. Agnus, C. Clévy, Y. Urushima, R. Perez, A. Hubert et al., A micromanipulation station based on a new integrated microprehensile microrobot on chip (mmoc), 35th International symposium on robotics, 2004.

J. Agnus, P. Nectoux, and N. Chaillet, Overview of Microgrippers and Design of a Micromanipulation Station Based on a MMOC Microgripper, 2005 International Symposium on Computational Intelligence in Robotics and Automation, 2005.
DOI : 10.1109/CIRA.2005.1554264
URL : https://hal.archives-ouvertes.fr/hal-00661471

F. Arai, D. Ando, T. Fukuda, Y. Nonoda, and T. Oota, Micro manipulation based on micro physics-strategy based on attractive force reduction and stress measurement, Proceedings 1995 IEEE/RSJ International Conference on Intelligent Robots and Systems. Human Robot Interaction and Cooperative Robots, pp.236-241, 1995.
DOI : 10.1109/IROS.1995.526166

F. Arai and T. Fukuda, A new pick up and release method by heating for micromanipulation, Proceedings IEEE The Tenth Annual International Workshop on Micro Electro Mechanical Systems. An Investigation of Micro Structures, Sensors, Actuators, Machines and Robots, pp.383-388, 1997.
DOI : 10.1109/MEMSYS.1997.581864

F. Arai, D. Andon, Y. Nonoda, T. Fukuda, H. Iwata et al., Integrated microendeffector for micromanipulation, IEEE/ASME Transactions on Mechatronics, vol.3, issue.1, pp.17-23, 1998.
DOI : 10.1109/3516.662864

G. Asch, Les capteurs en instrumentation industrielle. Dunod, 1999.

K. Autumn, W. P. Chang, R. Fearing, T. Hsieh, T. Kenny et al., Adhesive force of a single gecko foot-hair, Nature, vol.405, pp.681-685, 2000.

K. Autumn, Evidence for van der Waals adhesion in gecko setae, Proceedings of the National Academy of Sciences, vol.88, issue.12, pp.11993-12502, 2002.
DOI : 10.1007/s00114-001-0274-y

E. Beckert, M. Mohaupt, G. Harnisch, and R. Eberhardt, Handling of microoptical components for microassembly, SPIE, vol.4755, pp.531-542, 2002.

Y. Bellouard, T. Lehnert, J. E. Bidaux, T. Sidler, R. Clavel et al., Local annealing of complex mechanical devices: a new approach for developing monolithic micro-devices, Materials Science and Engineering: A, vol.273, issue.275, pp.273-275795, 1999.
DOI : 10.1016/S0921-5093(99)00418-9

H. Benzaoui, Modélisation thermomécanique et commande d'actionneurs en alliagesàliages`liagesà mémoire de forme pour la microrobotique, Thèse de doctorat, 1998.

A. Bergander, Control, wear testing & integration of stick-slip micropositionning, 2003.

K. F. Bohringer, R. S. Fearing, and K. Y. Goldberg, Handbook of industrial robotics, Chapter Microassembly, 1998.

J. M. Breguet, Actionneurs " stick and slip " pour micro-manipulateurs, Thèse de doctorat, 1998.

J. M. Breguet and A. Bergander, Toward the personal factory? SPIE, pp.293-303, 2001.

H. Van-brussel, J. Peirs, D. Reynaerts, A. Delchambre, G. Reinhart et al., Assembly of Microsystems, CIRP Annals - Manufacturing Technology, vol.49, issue.2, pp.451-472, 2000.
DOI : 10.1016/S0007-8506(07)63450-7

M. C. Carroza, A. Eisinberg, A. Menciassi, D. Campolo, S. Micera et al., Towards a force-controlled microgripper for assembling biomedical microdevices, International Conference on Intelligent Robots and SystemsCho99b] S. Koelemeijer Chollet and J. Jacot. Cost efficient assembly of microsystems. mst news, pp.271-276, 1999.
DOI : 10.1088/0960-1317/10/2/328

K. B. Choi, S. H. Kim, B. W. Choi, S. Koelemeijer-chollet, F. Bourgeois et al., Moving-magnet type precision miniature platform for fine positioning and compliant motion, International Symposium on Assembly and Task Planning, pp.921-937, 2001.
DOI : 10.1016/S0957-4158(00)00055-6
URL : http://www.sciencedirect.com/science?_ob=ShoppingCartURL&_method=add&_eid=1-s2.0-S0957415800000556&originContentFamily=serial&_origin=article&_ts=1480278990&md5=a555396cfd9a24a364dfc6f54f95ce92

C. Clévy, Etude et réalisation d'un micromanipulateur piézoélectrique monolithique permettant les changements d'outils, 2002.

C. Clévy, J. Agnus, and N. Chaillet, Micro-robot On Chip (MOC) : vers la microusine flexible, 2002.

C. Clévy, A. Hubert, J. Agnus, and N. Chaillet, A micromanipulation cell including a microtools changer, International Workshop on Microfactories, pp.166-169, 2004.

]. C. Clé04c, A. Clévy, N. Hubert, and . Chaillet, Changeur d'outils pour station de micromanipulation . RTP microrobotique, 2004.

C. Clévy, A. Hubert, and N. Chaillet, A new micro-tools exchange principle for micromanipulation, 2004 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS) (IEEE Cat. No.04CH37566), 2004.
DOI : 10.1109/IROS.2004.1389357

C. Clévy, A. Hubert, J. Agnus, and N. Chaillet, A micromanipulation cell including a tool changer, Journal of Micromechanics and Microengineering, vol.15, issue.10, pp.292-301, 2005.
DOI : 10.1088/0960-1317/15/10/S07

P. Cognard, Collage des matériaux -mécanismes. classification des colles, 2002.

P. Cognard, Colles et adhésifs pour emballages -généralités, 2004.

M. B. Cohn, K. F. Bohringer, J. M. Noworolski, A. Singh, C. G. Keller et al., Microassembly technologies for mems, Proceeding of SPIE Micromachining and MicrofabricationCug02a] O. Cugat. Micro-actionneursélectroactifsactionneurs´actionneursélectroactifs. Hermès, 1998.

M. Dafflon, T. Wimbock, J. P. Bacher, and R. Clavel, Analyse et caracteristique du système de vision d'une plateforme de micromanipulation, RTP microrobotique, 2004.

J. S. Dai and D. R. Kerr, A six-component contact force measurement device based on the Stewart platform, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, vol.4, issue.15, pp.687-697, 2000.
DOI : 10.1243/0954406001523696

K. A. Daltorio, A. D. Horchler, S. Gorb, R. E. Ritzmann, and R. D. Quinn, A small wall-walking robot with compliant, adhesive feet, 2005 IEEE/RSJ International Conference on Intelligent Robots and Systems, pp.4018-4041, 2005.
DOI : 10.1109/IROS.2005.1545596

B. Dasgupta and T. S. Mruthyunjaya, The Stewart platform manipulator: a review. Mechanism and Machine Theory, pp.15-40, 2000.

N. Dechev, W. L. Cleghorn, and J. K. Mills, Construction of a 3D MEMS Microcoil Using Sequential Robotic Microassembly Operations, Microelectromechanical Systems, 2003.
DOI : 10.1115/IMECE2003-42798

N. Dechev, W. L. Cleghorn, and J. K. Mills, Microassembly of 3D MEMS structures utilizing a MEMS microgripper with a robotic manipulator, 2003 IEEE International Conference on Robotics and Automation (Cat. No.03CH37422), pp.3193-3199, 2003.
DOI : 10.1109/ROBOT.2003.1242082

N. Dechev, W. L. Cleghorn, and J. K. Mills, Microassembly of 3-D Microstructures Using a Compliant, Passive Microgripper, Journal of Microelectromechanical Systems, vol.13, issue.2, pp.176-189, 2004.
DOI : 10.1109/JMEMS.2004.825311

N. Dechev, W. L. Clerghorn, and J. K. Mills, Tether and joint design for microcomponents used in microassembly of 3D microstructures, MEMS/MOEMS Components and Their Applications, 2004.
DOI : 10.1117/12.524685

F. Dionnet, Télé-micro-manipulation par adhésion, Thèse de doctorat, 2005.

M. Driesen, T. Varidel, S. Regnier, and J. M. Breguet, Micro manipulation by adhesion with two collaborating mobile micro robots, Journal of Micromechanics and Microengineering, vol.15, issue.10, pp.259-267, 2005.
DOI : 10.1088/0960-1317/15/10/S02

W. Driesen, Micron: Small autonomous robot for cell manipulation application, International Conference on Robotics and Automation, pp.856-861, 2005.

R. Eberhardt, T. Scheller, G. Tittelbach, and V. Guyenot, Automated assembly of micro-optical components, SPIE, vol.3202, pp.117-127, 1998.

W. Ehrfeld, M. Begemann, U. Berg, A. Lohf, F. Michel et al., Highly parallel mass fabrication and assembly of microdevices, pp.145-150, 2001.

B. Eyglument, Manuel de thermique : théorie et pratique. Hermès,2ì eme edition, 1997.

S. Fatikow, J. Seyfried, S. Fahlbusch, A. Buerkle, and F. Schmoeckel, A flexible microrobot-based microassembly station, 1999 7th IEEE International Conference on Emerging Technologies and Factory Automation. Proceedings ETFA '99 (Cat. No.99TH8467), pp.135-169, 2000.
DOI : 10.1109/ETFA.1999.815384

S. Fatikow, A. Kortschack, H. Hudsen, T. Sievers, and T. Wich, Towards fully automated microhandling, International Workshop on Microfactories, pp.34-39, 2004.

R. S. Fearing, Survey of sticking effects for micro parts handling, Proceedings 1995 IEEE/RSJ International Conference on Intelligent Robots and Systems. Human Robot Interaction and Cooperative Robots, 1995.
DOI : 10.1109/IROS.1995.526162

J. T. Feddema and R. W. Simon, Visual servoing and cad-drivent microassembly, IEEE Robotics and Automation Magazine, pp.18-24, 1998.
DOI : 10.1109/100.740460

A. Ferreira, Strategies of human-robot interaction for automatic microassembly, 2003 IEEE International Conference on Robotics and Automation (Cat. No.03CH37422), pp.3076-3081, 2003.
DOI : 10.1109/ROBOT.2003.1242063

R. Fischer, J. Zuhlke, and . Hankes, Gripping technology for automated microassembly, SPIE, vol.3202, pp.12-19, 1998.
DOI : 10.1117/12.298037

J. M. Flaus, La régulation industrielle. Régulateurs PID, prédictifs et flous. Hermès, 1994.

C. K. Fung, I. Elhajj, W. J. Li, and N. Xi, A 2-D PVDF force sensing system for micro-manipulation and micro-assembly, Proceedings 2002 IEEE International Conference on Robotics and Automation (Cat. No.02CH37292), pp.1489-94, 2002.
DOI : 10.1109/ROBOT.2002.1014754

K. Furuta, The Experimental Microfactory System for Processing and Assembling, The fifth International Micromachine Symposium, pp.173-177, 1999.
DOI : 10.1541/ieejsmas.122.326

A. Gaillet and C. Reboulet, An isostatic six component force and torque sensor, 13 th International Symposium on Industrial Robotics, 1983.

C. Gartner, V. Blumel, A. Kraplin, and T. Possner, Micro-assembly processes for beam transformation systems of high-power laser diode bars, pp.23-24, 2000.

]. A. Gau03, F. Gautier, C. Lamarque, I. Prelle, L. Garidi et al., Machine d'alignement de plaques perforées, RTP microrobotique, 2003.

T. Gaugel, M. Bengel, D. Malthan, J. Schliesser, J. Kegeler et al., Miniaturized reconfigurable micro-assembly system, International Precision Assembly Seminar, 2004.

M. Gauthier, B. Lopez-walle, and C. Clévy, Comparison between micro-objects manipulations in dry and liquid mediums, 2005 International Symposium on Computational Intelligence in Robotics and Automation, 2005.
DOI : 10.1109/CIRA.2005.1554360

A. K. Geim, S. V. Dubonos, I. V. Grigorieva, K. S. Novoselov, A. A. Zhukov et al., Microfabricated adhesive mimicking gecko foot-hair, Nature Materials, vol.2, issue.7, pp.461-463, 2003.
DOI : 10.1038/nmat917

A. Georgiev, P. K. Allen, and W. Edstrom, Visually-guided protein crystal manipulation using micromachined silicon tools, 2004 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS) (IEEE Cat. No.04CH37566), pp.236-241, 2004.
DOI : 10.1109/IROS.2004.1389358

Y. Haddab, Conception et réalisation d'un système de micromanipulation contrôlé en effort et en position pour la manipulation d'objets de taille micrométrique, Thèse de doctorat, 2000.

Y. Hatamura and H. Morishita, Direct coupling system between nanometer world and human world, IEEE Proceedings on Micro Electro Mechanical Systems, An Investigation of Micro Structures, Sensors, Actuators, Machines and Robots., pp.203-208, 1990.
DOI : 10.1109/MEMSYS.1990.110277

Y. Hatamura, M. Nakao, and T. Sato, Construction of an Integrated Manufacturing System for 3D Microstructure ??? Concept, Design and Realization, CIRP Annals - Manufacturing Technology, vol.46, issue.1, pp.313-318, 1997.
DOI : 10.1016/S0007-8506(07)60833-6

D. Heriban, Etude d'une stratégie de lâcher pour la micromanipulation : utilisation de la diélectrophorèse, Mémoire de Master Recherche, Ecole Nationale Supérieure de Mécanique et des Microtechniques, 2005.

M. Hohn and C. , Qualification of standard industrial robots for micro-assembly, Proceedings 1999 IEEE International Conference on Robotics and Automation (Cat. No.99CH36288C), pp.3085-90, 1999.
DOI : 10.1109/ROBOT.1999.774067

E. E. Hui, R. T. Howe, and M. S. Rodgers, Single-step assembly of complex 3-D microstructures, Proceedings IEEE Thirteenth Annual International Conference on Micro Electro Mechanical Systems (Cat. No.00CH36308), pp.602-607, 2000.
DOI : 10.1109/MEMSYS.2000.838586

T. Kasaya, H. Miyazaki, S. Saito, and T. Sato, Micro object handling under SEM by vision-based automatic control, Proceedings 1999 IEEE International Conference on Robotics and Automation (Cat. No.99CH36288C), pp.2189-2196, 1999.
DOI : 10.1109/ROBOT.1999.770431

D. H. Kim, B. Kim, S. M. Kim, and H. Kang, Development of a piezoelectric polymer-based sensorized microgripper for microassembly and micromanipulation, International Conference on Intelligent Robots and Systems, pp.1864-1869, 2003.
DOI : 10.1007/s00542-003-0330-y

]. P. Kor05, Q. Korhonen, J. Zhou, S. Laitinen, and . Sjovall, Automatic dextrous handling of micro components using a 6 dof microgripper, CIRA, 2005.

K. Koyano and T. Sato, Micro object handling system with concentrated visual fields and new handling skills, Proceedings of IEEE International Conference on Robotics and Automation, pp.2541-2548, 1996.
DOI : 10.1109/ROBOT.1996.506545

B. E. Kratochvil, K. B. Yesin, V. Hess, and B. J. Nelson, Design of a visually guided 6 dof micromanipulator system for 3d assembly of hybrid mems, International Workshop on Microfactories, pp.128-133, 2004.

P. Lambert, P. Letier, and A. Delchambre, Capillary and surface tension forces in the manipulation of small parts, Proceedings of the IEEE International Symposium onAssembly and Task Planning, 2003., 2003.
DOI : 10.1109/ISATP.2003.1217187

P. Lambert, V. Vandaele, and A. Delchambre, Non-contact handling in microassembly: state of the art, IPAS, pp.67-76, 2004.

P. Lambert and A. Delchambre, Design rules for a capillary gripper in microassembly, (ISATP 2005). The 6th IEEE International Symposium on Assembly and Task Planning: From Nano to Macro Assembly and Manufacturing, 2005., 2005.
DOI : 10.1109/ISATP.2005.1511452

L. Ioan-doré, Identification et commande des systèmes. Traité des nouvelles technologies, série Automatique. Hermès, 1993.

W. H. Lee, B. Kang, Y. S. Oh, H. Stephanou, A. C. Sanderson et al., Micropeg manipulation with compliant microgripper A four-degree-off-freedom microprehensile microrobot on chip, International Conference on Robotics and Automation, pp.3213-321833, 2003.

J. Liu, Y. X. Zhou, and T. H. Yu, Freeze tweezer to manipulate mini/micro objects, Journal of Micromechanics and Microengineering, vol.14, issue.2, pp.269-276, 2004.
DOI : 10.1088/0960-1317/14/2/015

L. Ljung, System identification, theory for user, 1999.

S. Mazerolle, R. Rabe, S. Fahlbusch, J. Michler, and J. M. Breguet, High precision robotics system for scanning electron microscopes, International Workshop on Microfactories, 2004.

A. Menciassi, M. C. Carroza, C. Ristori, G. Tiezzi, and P. Dario, A workstation for micromanipulation of micro objects, ICAR, pp.253-258, 1997.

A. Menciassi, A. Eisenberg, I. Izzo, and P. Dario, From ???Macro??? to ???Micro??? Manipulation: Models and Experiments, IEEE/ASME Transactions on Mechatronics, vol.9, issue.2, pp.311-319, 2004.
DOI : 10.1109/TMECH.2004.828657

J. P. Merlet, Les robotsparalì eles. Collection robotique. Hermès, 2 i` eme edition, 1997.

G. Milton, Y. Gharbia, and J. Katupitiya, Vision based ultra-prcision centering of optical fibers for microlens fabrication, International Conference on Intelligent Robots and Systems, pp.3045-3094, 2004.

M. Mitsuishi, K. Kobayashi, T. Nagao, Y. Hatamura, T. Sato et al., Development of tele-operated micro-handling/machining system based on information transformation, Proceedings of 1993 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS '93), pp.1473-78, 1993.
DOI : 10.1109/IROS.1993.583834

H. Miyazaki and T. Sato, Mechanical assembly of three-dimensional microstructures from fine particles, Advanced Robotics, vol.11, issue.2, pp.139-185, 1997.
DOI : 10.1163/156855397X00308

H. Miyazaki, Y. Tomizawa, K. Koyano, T. Sato, and N. Shinya, Adhesion force measurement system for micro-objects in a scanning electron microscope, Review of Scientific Instruments, vol.71, issue.8, pp.713123-3131, 2000.
DOI : 10.1063/1.1305812

H. Miyazaki, Y. Tomizawa, S. Saito, T. Sato, and N. Shinya, Adhesion of micrometer-sized polymer particles under a scanning electron microscope, Journal of Applied Physics, vol.88, issue.6, pp.3330-3340, 2000.
DOI : 10.1063/1.1288006

P. M. Morse and H. Feshbach, Methods of Theoretical Physics, American Journal of Physics, vol.22, issue.6, 1953.
DOI : 10.1119/1.1933765

H. Morishita and Y. Hatamura, Development of ultra precise micro manipulator system under stereo sem observation, International Conference on Intelligent Robots and Systems, pp.1717-1738, 1993.

C. C. Nguyen, S. S. Antrazi, and Z. L. Zhou, Analysis and implementation of a 6 DOF Steward platform-based force sensor for passive compliant robotic assembly, IEEE Proceedings of the SOUTHEASTCON '91, pp.880-884, 1991.
DOI : 10.1109/SECON.1991.147886

C. C. Nguyen, Z. L. Zhou, S. S. Antrazi, and C. E. Campbell, Efficient computation of forward kinematics and Jacobian matrix of a Stewart platform-based manipulator, IEEE Proceedings of the SOUTHEASTCON '91, 1991.
DOI : 10.1109/SECON.1991.147884

M. Nienhaus, W. Ehrfeld, F. Michel, V. Greaff, and A. Wolf, Automatic microassembly of radar sensors for automative applications, SPIE Conference on Micromachining and Microfabrication Process Technology IV, pp.135-142, 1998.

M. Nienhaus, W. Ehrfeld, Y. Ansel, U. Berg, F. Schmitz et al., Strategies and new developments for automated microassembly, MICRONORA 2000, pp.59-62, 2000.

M. Nienhaus, W. Ehrfeld, U. Berg, F. Schmitz, and H. Soultan, Tools and methods for automated assembly of miniaturized gear systems, Microrobotics and Microassembly II, pp.33-43, 2000.
DOI : 10.1117/12.403701

K. Ohara, K. Ohba, T. Tanikawa, M. Hiraki, S. Wakatsuki et al., Hands free micro operation for protein crystal analysis, 2004 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS) (IEEE Cat. No.04CH37566), pp.1728-1761, 2004.
DOI : 10.1109/IROS.2004.1389645

M. N. Ozisik, Finite difference methods in heat transfert, 1994.

J. Peirs and K. U. Dept, Design of micromechatronic systems: scalelaws, technologies, and medical applications, Mech. Eng, 2001.

R. Perez, J. Agnus, C. Clévy, A. Hubert, and N. Chaillet, 2 dof piezoactuator for micromanipulation tasks, ACTUATOR, pp.767-770, 2004.

R. Perez, J. Agnus, C. Clévy, A. Hubert, and N. Chaillet, Modelling, fabrication and validation of a high performance 2 dof microgripper, ASME/IEEE Transaction on Mechatronics, vol.10, issue.2, 2005.

D. Popa, G. Hun-kang, J. Sin, and J. Zou, Reconfigurable micro-assembly system for photonics applications, Proceedings 2002 IEEE International Conference on Robotics and Automation (Cat. No.02CH37292), pp.1495-1500, 2002.
DOI : 10.1109/ROBOT.2002.1014755

D. O. Popa and H. E. Stephanou, Micro and meso scale robotic assembly, 2002.

M. Rakotondrabe, Y. Haddab, F. J. Lutzral00-]-s, B. Ralis, B. J. Vikramaditya et al., Modular and re-organisable micromanipulation station Micropositioning of a weakly calibrated microassembly system using coarse-to-fine visual servoing strategies, RTP Microrobotique, pp.123-131, 2000.

G. Reinhart and M. Hohn, Growth into Miniaturization ??? Flexible Microassembly Automation, CIRP Annals - Manufacturing Technology, vol.46, issue.1, pp.7-10, 1997.
DOI : 10.1016/S0007-8506(07)60764-1

A. Rosenthal and J. Voldman, Dielectrophoretic Traps for Single-Particle Patterning, Biophysical Journal, vol.88, issue.3, 2005.
DOI : 10.1529/biophysj.104.049684

P. Rougeot, S. Régnier, and N. Chaillet, Forces analysis for micro-manipulation, 2005 International Symposium on Computational Intelligence in Robotics and Automation, 2005.
DOI : 10.1109/CIRA.2005.1554262

S. Saito, H. Miyazaki, and T. Sato, Pick and place operation of a micro-object with high reliability and precision based on micro-physics under SEM, Proceedings 1999 IEEE International Conference on Robotics and Automation (Cat. No.99CH36288C), pp.2736-2743, 1999.
DOI : 10.1109/ROBOT.1999.774011

S. Saito, H. T. Miyazaki, and T. Sato, Micro-object pick and place operation under sem based on micro-physics, Journal of Robotics and Mechatronics, vol.14, issue.3, pp.227-237, 2002.

T. Sato, K. Koyano, M. Nakao, and Y. Hatamura, Novel manipulator for micro object handling as interface between micro and human worlds, Proceedings of 1993 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS '93), pp.1674-81, 1993.
DOI : 10.1109/IROS.1993.583862

M. Savia, Q. Zhou, and H. N. Koivo, Simulating adhesion forces between arbitrarily shaped objects in micro/nano-handling operations, 2004 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS) (IEEE Cat. No.04CH37566), pp.1722-1727, 2004.
DOI : 10.1109/IROS.2004.1389644

F. Schmoeckel and H. Worn, Remotely controllable mobile microrobots acting as nano positioners and intelligent tweezers in scanning electron microscopes (SEMs), Proceedings 2001 ICRA. IEEE International Conference on Robotics and Automation (Cat. No.01CH37164)
DOI : 10.1109/ROBOT.2001.933226

Y. Shen, N. Xi, U. C. Wejinya, and W. J. Li, High sensitive 2-d force sensor for assembly of surface mems devices, International Conference on Intelligent Robots and Systems, pp.3363-3368, 2004.

]. E. Shi00, J. A. Shimada, J. Thompson, R. Yan, R. S. Wood et al., Prototyping millirobots using dextrous microassembly and folding Nanomolding based fabrication of synthetic gecko foothairs Synthetic gecko foot-hair micro/nano-structures for future wall-climbing robots, ASME IMECE/DSCD 2nd Conference on Nanotechnology International Conference on Robotics and Automation, pp.1-8, 2000.

G. D. Skidmore, M. Ellis, E. Parker, N. Sarkar, and R. Merkle, Micro-assembly for top-down nanotechnology, MHS2000. Proceedings of 2000 International Symposium on Micromechatronics and Human Science (Cat. No.00TH8530), pp.3-9, 2000.
DOI : 10.1109/MHS.2000.903276

J. Smits and S. I. Dalke, The constituant equations of piézoelctric bimorphs, International Ultrasonic Symposium, pp.781-784, 1989.

D. Stewart, A platform with six degrees of freedom, Proc. of Institute of Mechanical Engineers, vol.180, pp.15-1371, 1965.

L. Sun, H. Xie, and L. Chen, Task-reconfigurable system for mems assembly, International Conference on Robotics and Automation, pp.844-848, 2005.

A. Tafazzoli, C. Pawashe, and M. Sitti, Atomic force microscope based twodimensional assembly of micro/nanoparticles, International Symposium on Assembly and Task Planning, 2005.

T. Tanikawa and T. Arai, Development of a micro-manipulation system having a two-fingered micro-hand, IEEE Transactions on Robotics and Automation, vol.15, issue.1, pp.152-162, 1999.
DOI : 10.1109/70.744610

T. Tanikawa, T. Arai, and N. Koyachi, Development of small-sized 3 DOF finger module in micro hand for micro manipulation, Proceedings 1999 IEEE/RSJ International Conference on Intelligent Robots and Systems. Human and Environment Friendly Robots with High Intelligence and Emotional Quotients (Cat. No.99CH36289), pp.876-881, 1999.
DOI : 10.1109/IROS.1999.812790

M. Tanaka, Development of desktop machining microfactory. RIKEN Review : Focused on Advances on Micro-mechanical Fabrication Techniques, pp.46-49, 2001.

T. Tanikawa, M. Kawai, N. Koyachi, T. Arai, T. Ide et al., Force control system for autonomous micro-manipulation, Proceedings 2001 ICRA. IEEE International Conference on Robotics and Automation (Cat. No.01CH37164), pp.610-615, 1999.
DOI : 10.1109/ROBOT.2001.932617

J. Thompson and R. S. Fearing, Automating microassembly with ortho-tweezers and force sensing, Proceedings 2001 IEEE/RSJ International Conference on Intelligent Robots and Systems. Expanding the Societal Role of Robotics in the the Next Millennium (Cat. No.01CH37180), 2001.
DOI : 10.1109/IROS.2001.977166
URL : http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.128.1156

M. Tichem, D. Lang, and B. Karpuschewski, A classification scheme for quantitative analysis of micro-grip principles. Assembly Automation, pp.88-93, 2004.

K. Tsui, A. A. Geisberger, M. Ellis, and G. Skidmore, Micromachined end-effector and techniques for directed MEMS assembly, Journal of Micromechanics and Microengineering, vol.14, issue.4, pp.542-549, 2004.
DOI : 10.1088/0960-1317/14/4/015

T. Udeshi and K. Tsui, Assembly sequence planning for automated micro assembly, (ISATP 2005). The 6th IEEE International Symposium on Assembly and Task Planning: From Nano to Macro Assembly and Manufacturing, 2005., 2005.
DOI : 10.1109/ISATP.2005.1511457

T. Watanabe, N. Fujino, and Z. Jiang, Micromanipulation using squeeze effet, International Conference on Intelligent Robots and Systems, pp.3357-62, 2004.
DOI : 10.1109/iros.2004.1389935

M. Weck and C. Peschke, Assembling hybrid microsystems. IAP Workshop- Advanced Mechatronic Systems, 2003.

M. Weck and C. Peschke, Equipment technology for flexible and automated microassembly . Microsystem Technologies, pp.241-246, 2004.
DOI : 10.1007/s00542-003-0360-5

G. M. Whitesides and B. Grzybowski, Self-Assembly at All Scales, Science, vol.295, issue.5564, pp.2418-2439, 2002.
DOI : 10.1126/science.1070821

B. Winzek, S. Schmitz, and T. Sterzl, Microgrippers with shape memory thin film actuators, IPAS, pp.77-84, 2004.

Y. Yamamoto, T. Hashimoto, T. Okubo, and T. Itoh, Task analysis of ultra-precision assembly processes for automation of human skills, Proceedings 2001 IEEE/RSJ International Conference on Intelligent Robots and Systems. Expanding the Societal Role of Robotics in the the Next Millennium (Cat. No.01CH37180), pp.2093-2098, 2001.
DOI : 10.1109/IROS.2001.976380

Y. Yamamoto, R. Konishi, Y. Negishi, and T. Kawakami, Prototyping ubiquitous micro-manipulation system, Proceedings 2003 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM 2003), pp.709-714, 2003.
DOI : 10.1109/AIM.2003.1225430

G. Yang, J. A. Gaines, and B. J. Nelson, A flexible experimental workcell for efficient and reliable wafer-level 3d microassembly, International Conference on Robotics and Automation, pp.133-138, 2001.

G. Yang, J. A. Gaines, and B. J. Nelson, A supervisory wafer-level 3d microassembly system for hybrid mems fabrication, Journal of Intelligent and Robotic Systems, vol.37, issue.1, pp.43-68, 2003.
DOI : 10.1023/A:1023982907874

H. Zang, Y. Bellouard, E. Burbet, R. Clavel, A. N. Poo et al., Shape memory alloy microgripper for robotic microassembly of tissue engineering scaffolds, International Conference on Robotics and Automation, pp.4918-4924, 2004.

W. Zesch, M. Brunner, and A. Weber, Vacuum tool for handling microobjects with a NanoRobot, Proceedings of International Conference on Robotics and Automation, pp.1761-66, 1997.
DOI : 10.1109/ROBOT.1997.614405

Y. Zhou, B. J. Nelson, and B. Vikramaditya, Fusing force and vision feedback for micromanipulation, Proceedings. 1998 IEEE International Conference on Robotics and Automation (Cat. No.98CH36146), pp.1220-1225, 1998.
DOI : 10.1109/ROBOT.1998.677265

Y. Zhou and B. J. Nelson, Force controlled microgripping, SPIE Conference on Microrobotics and Microassembly, pp.211-221, 1999.

Y. Zhou and B. J. Nelson, The effect of material properties and gripping force on micrograsping, Proceedings 2000 ICRA. Millennium Conference. IEEE International Conference on Robotics and Automation. Symposia Proceedings (Cat. No.00CH37065), pp.1115-1120, 2000.
DOI : 10.1109/ROBOT.2000.844748

Q. Zhou, A. Aurelian, B. Chang, C. D. Corral, and H. N. Koivo, Microassembly system with controlled environment, Journal of Micromechatronics, vol.2, issue.3, pp.3-4227, 2004.
DOI : 10.1163/156856304773954304