L. B. Chiang-m and L. M. , Effect of gradient a-SiC x interlayer on adhesion of DLC films, Materials Chemistry and Physics, vol.72, pp.163-166, 2001.

S. E. Bak-g, Relation between physical structure and electrical properties of diamond-like carbon thin films, Diamond and Related Materials, vol.14, pp.23-34, 2005.

V. A. Trakhtenberg-i, R. A. , P. S. Bakunin-o, . G. Korshunov-l, and . V. Kuzmina-e, The effect of substrate and DLC morphology on the tribological properties of coating, Diamond and Related Materials, vol.9, pp.838-842, 2000.

L. E. Ding-y, L. L. Blanpain-b, and C. J. , Influence of humidity on the friction of diamond and diamond-like carbon materials, Tribology International, vol.40, pp.216-219, 2007.

S. J. Cai-w, Mechanical properties and anti-corrosion behavior of the diamond-like carbon films

K. J. , R. J. Nouveau-c, . Savan-a, and . Beer-p, Resistance to electrochemical corrosion of Cr x N y -and DLC-coated steel tools in the environment of wet wood, Surface and Coatings Technology, vol.200, pp.83-86, 2005.

S. C. Strunz-w, The evaluation of experimental dielectric data of barrier coatings by means of different models, Electrochimica Acta, vol.46, pp.3619-3625, 2001.

K. Pyun-s.-i and K. , An investigation of the capacitance dispersion on the fractal carbon electrode with edge and basal orientations, Electrochimica Acta, vol.48, pp.3455-3463, 2003.

B. G. Van-den, E. A. Sluyters-rehbach, and S. J. , The analysis of electrode impedances complicated by the presence of a constant phase element, Journal of Electroanalytical Chemistry, vol.176, pp.275-295, 1984.

H. C. Mansfeld-f, Concerning the Conversion of the Constant Phase Element Parameter Y 0 into a Capacitance, Corrosion, vol.57, pp.747-748, 2001.

I. Rubinstein, Physical electrochemistry : principles, methods, and applications

. Atomique, Thèse Physique. Reims : Université de Reims Champagne-Ardenne, 2000.

F. G. Fuchs-h, Classification of scanning probe microscopies, Pure and Applied Chemistry, vol.71, pp.1337-1357, 1999.

W. R. and W. C. Jones-r, In situ observations of the early stages of localized corrosion in Type 304 SS using the electrochemical atomic force microscope, Materials Science and Engineering, vol.288, pp.54-60, 2000.

K. Mudali and U. Katada-y, Electrochemical atomic force microscopic studies on passive films of nitrogen-bearing austenitic stainless steels, Electrochimica Acta, vol.46, pp.3735-3742, 2001.

C. M. Palumbo-f and . D-'agostino-r, Diagnostics and insights on PECVD for gas-barrier coatings, Pure Applied Chemistry, vol.74, pp.407-411, 2002.

C. M. Palumbo-f, . D-'agostino-r, and . Fayet-p, RF plasma deposition of SiO 2 -like films : plasma phase diagnostics and gas barrier film properties optimisation, Surface and Coatings Technology, pp.142-144, 2001.

R. C. Tristant-p and D. J. , Remote microwave plasma-enhanced chemical vapour deposition of insulating coating (SiO 2 ) on metallic substrates : film properties, Surface and Coatings Technology, vol.80, pp.18-22, 1996.

B. M. Goldenstein-h, Solidification of high speed steels, International Materials Review, vol.46, pp.92-107, 2001.

A. E. D-'agostino-r, G. S. Fracassi-f, and . Rosalbino-f, Surface analysis of PECVD organosilicon films for corrosion protection of steel substrates, Surface and Interface Analysis, vol.34, pp.155-159, 2002.

A. E. , G. S. , R. F. Fracassi-f, and . D-'agostino-r, Electrochemical impedance spectroscopy evaluation of the corrosion behaviour of Mg alloy coated with PECVD organosilicon thin film, Progress in Organic Coatings, vol.46, pp.107-111, 2003.

G. E. , H. J. Stoch-a, and S. J. , XPS study of ?-quartz surface, Journal of Solid State Chemistry, vol.33, pp.121-124, 1980.

M. W. Van and W. J. , Binding energy shifts in the x-ray photoelectron spectra of a series of related Group IVa compounds, Journal of Physical Chemistry, vol.77, pp.964-969, 1973.

D. B. , G. D. Sergushin-n, . I. Nefedov-v, and . V. Salyn-y, Simple and coordination compounds. An X-ray photoelectron spectroscopic study of certain oxides, Russian Journal of Inorganic Chemistry, vol.20, pp.2307-2314, 1975.

C. B. Brion-d, E. J. , and D. J. , X-Ray Photoelectron study of some siliconoxygen compounds, Journal of Electron Spectroscopy and Related Phenomena, vol.10, pp.85-91, 1977.

Z. J. and W. D. Fisher-e, Mechanisms of SiO 2 film deposition from tetramethylcyclotetrasiloxane, dimethyldimethoxysilane, and trimethylsilane plasmas, Journal of Vacuum Science and Technology A, vol.22, pp.201-213, 2004.

V. C. , A. E. , M. D. , G. S. , and A. E. Rosalbino-f, RF power and SiO x C y H z deposition efficiency in TEOS/O 2 discharges for the corrosion protection of magnesium alloys, Surface and Coatings Technology, vol.200, pp.6618-6622, 2006.

N. B. , T. H. Keddam-m, . Liao-h, and C. C. Monteil-g, Electrochemical impedance spectroscopy and dielectric properties of polymer : application to PEEK thermally sprayed coating

P. A. Heft-a and L. K. Weidl-r, Characterization of SiO 2 thin films prepared by plasmaactivated chemical vapour deposition, Surface and Coatings Technology, vol.201, pp.189-196, 2006.

B. G. He-l, L. J. Ellingson-l, and T. D. , Studies of a new accelerated evaluation method for coating corrosion resistance ? thermal cycling testing, Progress in Organic Coatings, vol.39, pp.67-78, 2000.

A. E. , G. S. , R. F. Fracassi-f, and . D-'agostino-r, Corrosion behaviour of a mild steel coated with PECVD organosilicon thin films, Congress Proceedings EUROCORR, p.30, 2001.

H. D. Driessche-p, Stability and electrochemical impedance of mechanisms with a single adsorbed species, Journal of Electroanalytical Chemistry, vol.501, pp.222-234, 2001.

F. J. , J. J. Maier-j, and L. J. , Inductive loops in Impedance Spectroscopy Caused by Electrical Shielding, Journal of the Electrochemical Society, vol.143, pp.3636-3641, 1996.

Z. A. Liu-e, T. F. Annergren-i, . Zhang-s, and G. J. Hing-p, EIS capacitance diagnosis of nanoporosity effect on the protection of DLC films, Diamond and Related Materials, vol.11, pp.160-168, 2002.

T. H. Normand, R. C. Pebere-n, and . Wery-m, Evaluation de la protection contre la corrosion assurée par des revêtements organiques, Prévention et lutte contre la corrosion. Une approche scientifique et technique. Lausanne : Presses Polytechniques et Universitaires Romandes, pp.123-144, 2004.

L. Q. Thu and T. H. Touzain-s, EIS characterization of thick flawed organic coatings aged under cathodic protection in seawater, Electrochimica Acta, vol.51, issue.12, pp.2491-2501, 2006.
DOI : 10.1016/j.electacta.2005.07.049

L. V. Moors-m and . Wettinck-e, An EIS study of the influence of imperfections on the corrosion behaviour of an organic coated steel system, Journal of Applied Electrochemistry, vol.32, pp.853-857, 2002.

K. A. Tabellout-m, C. S. Herlin-n, and E. J. , Conduction and dielectric behaviour of SiC nano-sized materials, Solid State Communications, vol.115, pp.389-393, 2000.

D. F. Beranger-g and . Baroux-b, Corrosion localisée. Les Ulis Cedex : Les Editions de la Physique, pp.697-2868832407, 1994.

F. Hsu-c.-h, L. , and S. , Effect of PVD sputtered coatings on the corrosion resistance of AISI 304 stainless steel, Materials Science and Engineering A, vol.347, pp.123-129, 2003.

V. D. , C. J. Mantel-m, and . L. Vasconcelos-w, Corrosion resistance of stainless steel coated with sol-gel silica, Journal of Non-Crystalline Solids, vol.273, pp.135-139, 2000.

R. F. Buscail-h, C. E. , C. R. Issartel-c, and . Perrier-s, Yttrium sol-gel coating effects on the cyclic oxidation behaviour of 304 stainless steel, Corrosion Science, vol.45, pp.2867-2880, 2003.

W. C. Jiang-f and W. F. , The characterization and corrosion resistance of cerium chemical conversion coatings for 304 stainless steel, Corrosion Science, vol.46, pp.75-89, 2004.

F. S. De and C. N. , Analysis of the galvanostatic polarization method for determining reliable pitting potentials on stainless steels in crevice-free conditions, Corrosion Science, vol.45, pp.2769-2786, 2003.

R. C. Tristant-p and D. J. , Remote microwave plasma-enhanced chemical vapour deposition of insulating coatings (SiO 2 ) on metallic substrates: film properties, Surface and Coatings Technology, vol.80, pp.18-22, 1996.

H. Xu-j, Properties of amorphous SiO 2 films prepared by reactive RF magnetron sputtering method, Vacuum, vol.68, pp.197-202, 2002.

L. N. and S. J. Newman-r, The initiation of crevice corrosion in stainless steels

P. J. Cano-e and B. J. , An impedance study on the influence of molybdenum in stainless steel pitting corrosion, Journal of Electroanalytical Chemistry, vol.537, pp.183-187, 2002.

A. M. and F. A. Heakel-f, Electrochemical behaviour of passive films on molybdenum-containing austenitic stainless steels in aqueous solutions, Electrochimica Acta, vol.50, pp.43-49, 2003.

L. R. , L. X. , G. J. Boeglin-h, and . Shalvoyr, Low pressure chemical vapour deposition of silicon nitride using the environmentally friendly tris(dimethylamino)silane precursor, Journal of Materials Research, vol.11, pp.1483-1488, 1996.

B. M. Wrobel-a and K. M. Vayrynen-i, Silicon Carbonitride Films Produced by Remote Hydrogen Microwave Plasma CVD Using a (Dimethylamino)dimethysilane Precursor, Chemical Vapor Deposition, vol.11, pp.44-52, 2005.

I. N. Oh-ishi, Preparation of Amino Group-Containing Polymers by Plasma Polymerization, Journal of Polymer Science A, vol.23, pp.1445-1454, 1985.

S. W. Fantini-f, . I. Alayo-m, and . Pereyra-i, Structural investigation of Si-rich amorphous silicon oxynitride films, Thin Solid Films, vol.425, pp.275-281, 2003.

C. D. Alayo-m and F. M. Pereyra-i, Structural analysis of silicon oxynitride films deposited by PECVD, Materials Science and Engineering B, vol.112, pp.123-127, 2004.

W. C. Riggs-w, D. L. , and M. J. , Handbook of X-ray photoelectron spectroscopy, 1979.

H. F. , A. A. Brechling-a, G. A. Heinzmann-u, . Szekeres-a, and . Simeonov-s, Plasma-assisted deposition of thin silicon oxide films in a remote PECVD reactor and characterization of films produced under different conditions, Vacuum, vol.75, pp.307-312, 2004.

Z. L. Verdonck-p, Deposition of silicon oxynitride at room temperature by Inductively Coupled Plasma-CVD, Thin Solid Films, vol.515, pp.596-598, 2006.

A. E. , G. S. , R. F. Fracassi-f, and . D-'agostino-r, Electrochemical impedance spetroscopy evaluation of the corrosion behaviour of Mg alloy coated with PECVD organosilicon thin film, Progress in Organic Coatings, vol.46, pp.107-111, 2003.

F. F. D-'agostino-r, A. E. Palumbo-f, and G. S. Rosalbino-f, Application of plasma deposited organosilicon thin films for the corrosion protection of metals, Surface and Coatings Technology, pp.174-175, 2003.

W. R. and W. C. Jones-r, In situ observations of the early stages of localized corrosion in Type 304 SS using the electrochemical atomic force microscope, Materials Science and Engineering, vol.288, pp.54-60, 2000.

L. B. Chiang-m and L. M. , Effect of gradient a-SiC x interlayer on adhesion of DLC films

B. T. Dresler-b and K. S. Hoffmann-m, Wear-resistant amorphous SiC coatings produced by plasma-enhanced CVD, Surface and Coatings Technology, pp.116-119, 1999.

P. P. Zhao-j, . Lemoine-p, . T. Mcadams-e, and . A. Mclaughlin-j, The effects of Si incorporation on the electrochemical and nanomechanical properties of DLC thin films

D. A. Angelis-b, C. S. Rizzo-c, and . P. Howlett-s, XPS study on the dispersion of carbone additives in silicon carbide powders, Applied Surface Science, vol.51, pp.177-183, 1991.

G. A. and U. J. Marquez-n, Reactive and nonreactive ion mixing of Ti films on carbon substrates, Journal of Vacuum Science Technology A, vol.6, pp.110-122, 1988.

D. M. Baer-d and . G. Stoebe-t, Nitrogen 1s charge referencing for Si 3 N 4 and related compounds, Surface and Interface Analysis, vol.11, pp.335-340, 1988.

W. C. , P. D. Six-h, H. H. , T. J. Kinisky-t, and . T. Jansen-w, Auger and photoelectron line energy relationships in aluminium-oxygen and silicon oxygen compounds, Journal of Vacuum Science Technology, vol.21, pp.933-944, 1982.

C. D. Leary-h and S. S. Slattery-j, ESCA surface analysis of plasma exposed silicon nitride and photoresist polymer films. VT 05452, IBM General Technology Division, pp.328-329

S. K. Black-k, Characterization of the treated surfaces of silicon alloyed pyrolytic carbon and SiC, Journal of Vacuum Science Technology A, vol.2, pp.744-747, 1984.

T. A. Bertoti-i and R. M. Mohai-m, Chemical state determination by combined x-ray excited auger and photoelectron spectroscopies, Acta Chimica Hungarica, vol.130, pp.837-855, 1993.

C. C. Huang-c, L. Y. , C. L. , and C. K. , The affinity of Si?N and Si?C bonding in amorphous silicon carbon nitride (a-SiCN) thin film, Diamond and Related Materials, vol.14, pp.1126-1130, 2005.

B. F. , R. I. Manolova-n, . Benoit-r, and D. S. Erre-r, Fullerene core starlike polymers ? 1. Preparation from fullerenes and monoazidopolyehers, European Polymer Journal, vol.34, pp.905-915, 1998.

R. K. Bard-a and . Stratmann-m, Fundamentals of Semiconductor Electrochemistry and Photoelectrochemistry Semiconductor Electrodes and Photoelectrochemistry, Encyclopedia of Electrochemistry, vol.6, pp.1-51, 2002.

P. S. Sunseri-c and D. F. Quarto, Investigation of amorphous oxide film-electrolyte junctions by AC techniques, AlChE Journal, vol.38, pp.219-226, 2004.

D. Quarto, F. , L. F. Mantia, and . Santamaria-m, Physicochemical characterization of passive films on niobium by admittance and electrochemical impedance spectroscopy studies, Electrochimica Acta, vol.50, issue.25-26, pp.5090-5102, 2005.
DOI : 10.1016/j.electacta.2005.03.065

S. H. Kottwitz-a, The contact metal-amorphous semiconductor considered as Schottky diode, Wissenschaftliche Zeitschrift, vol.23, pp.365-373, 1974.

H. L. and K. A. Benbrahim-n, Characterisation of passive films formed on low carbon steel in borate buffer solution (pH 9.2) by electrochemical impedance spectroscopy, Applied Surface Science, vol.252, pp.1510-1519, 2005.

S. M. and D. H. Kaplan-r, Current-voltage analysis of a-Si:H Schottky diodes, Applied Surface Science, 2005.

C. F. Gomes-w, On the determination of the flat-band potential of a semiconductor in contact with a metal or an electrolyte from the Mott-Schottky plot, Journal of Physics D ? Applied Physics, vol.11, pp.63-67, 1978.

C. F. Gomes-w, Electron energy levels in semiconductor electrochemistry, Progress in Surface Science, vol.12, issue.2, pp.155-215, 1982.
DOI : 10.1016/0079-6816(82)90002-8

H. E. Romero-a, Current density-voltage and capacitance-voltage characteristics of local p-n junction structures in CuInSe 2 single crystals, Crystal Research and Technology, vol.35, pp.315-319, 2000.

G. W. Vanmaekelbergh-d, Impedance spectroscopy at semiconductor electrodes: review and recent developments, Electrochimica Acta, vol.41, pp.967-973, 1996.

V. D. Cardon-f, Recombination in semiconductor electrodes: investigation by the electrical impedance model, Electrochimica Acta, vol.37, pp.837-846, 1992.

K. S. Liebert-b, Characterization of some ternary III-V semiconductor/electrolyte interfaces utilizing electrochemical impedance spectroscopy, Electrochimica Acta, vol.38, issue.14, pp.1993-1997, 1993.

M. L. Georgoulas-n and . Thanailakis-a, The influence of metal work function on electrical properties of metal/ a-SiC:H Schottky diodes, Microelectronics Journal, vol.28, pp.107-114, 1997.

R. S. Leygraf-c, P. J. Kulu-p, . Talimets-e, and . Mikli-v, Duplex TiN coatings deposited by arc plating for increased corrosion resistance of stainless steel substrates, Surface and Coatings Technology, vol.114, pp.129-136, 1999.

D. K. and K. S. Slepski-p, Selection of measurement frequency in Mott-Schottky analysis of passive layer on nickel, Electrochimica Acta, vol.51, pp.2204-2208, 2006.

N. I. Saito-n, Y. S. Inui-y, and . Nakamura-s, Enhancement of photoconductivity in r.f. glow-discharge-deposited a-SiC:H films doped wth nitrogen, Philosophical Magazine B, vol.68, issue.1, pp.55-65, 1993.

M. C. Steyer-p and M. , Formation of a semiconductive surface film on nanomultilayered TiN/CrN coatings and its correlation with corrosion protection of steel, Surface and Coatings Technology, vol.200, pp.109-112, 2005.

M. Université and J. Fourier-de-grenoble, Propriétés électriques des conducteurs et des semi-conducteurs [ en ligne ] Disponible sur : <http://www.ujf-grenoble.fr/PHY/enseignement/plates-formes, 2006.

T. J. Pietrzyk-b, . Kazimierski-p, and . Gubiec-k, Amorphous semiconductor and amorphous insulator ? two kinds of hydrogenated carbon-silicon films fabricated in the three-electrode reactor, Surface and Coatings Technology, pp.142-144, 2001.

L. J. and G. R. Scaglione-s, Evaluation of the sp 2 /sp 3 ratio in amorphous carbon structure by XPS and XAES, Applied Surface Science, vol.47, pp.17-21, 1991.

W. C. Geib-k, . Nakamura-s, . Miyasato-t, and . Mizokawa-y, Comparison of the C(KLL) first-derivative Auger spectra from XPS and AES using diamond, graphite, SiC and diamond-like carbon films, Surface Science, vol.182, pp.431-438, 1987.

S. E. Bak-g, Relation between physical structure and electrical properties of diamond-like carbon thin film, Diamond and Related Materials, vol.14, pp.23-34, 2005.

P. N. and R. C. Wery-m, Prévention et lutte contre la corrosion, pp.229-255, 2004.

L. D. and M. S. Stemp-m, Electrochemical methods in tribocorrosion : a critical appraisal, Electrochimica Acta, vol.46, pp.3913-3929, 2001.

Y. Z. Zhou-p and . Shi-j, Some factors influencing corrosion-erosion performance of materials

J. X. , L. S. Tao-d, and Y. J. , Accelerative effect of wear on corrosion of high-alloy stainless steel Corrosion, pp.836-841, 1993.

N. R. Ball-a, On the synergistic effects of abrasion and corrosion during wear, Wear, vol.87, pp.351-361, 1983.

B. K. Ball-a, Synergistic abrasive corrosive wear of chromium-containing steels, British Corrosion Journal, vol.24, pp.222-228, 1989.

B. A. Stachowiak-g, Predicting synergism between corrosion and abrasive wear

K. D. Pitt-c and W. M. , Simultaneous corrosion and abrasion measurements under grinding conditions, Corrosion, vol.44, pp.221-228, 1988.

K. K. Bhattacharyya-s and A. V. , An electrochemical polarization technique for evaluation of wear-corrosion in moving components under stress, Wear of materials, pp.772-778, 1981.

W. S. Friedersdorf-f, . W. Madsen-b, and . D. Cramer-s, Methods of measuring wearcorrosion synergism, Wear, pp.181-183, 1995.

O. Y. Kirinuki-m, Y. M. Suzuki-t, and Y. K. , Effect of ion beam implantation on density of DLC prepared by plasma-based ion implantation and deposition. Nuclear Instruments and Methods in, Physics Research Section B, vol.242, pp.335-337, 2006.

Z. Z. , L. K. Bello-i, L. C. , and L. S. , Study of tribological performance of ECR-CVD diamond-like carbon coatings on steel substrates: Part 2. The analysis of wear mechanism, Wear, vol.258, pp.1589-1599, 2005.

L. E. Ding-y, L. L. Blanpain-b, and C. , Influence of humidity on the friction of diamond and diamond-like carbon materials, Tribology International, vol.40, pp.216-219, 2007.

D. E. Wit, D. D. Wu-p, and C. J. , Lubricating reaction products on TiN coatings during sliding wear in phosphoric acid, Surface and Coatings Technology, vol.135, issue.1, pp.8-13, 2000.
DOI : 10.1016/S0257-8972(00)00718-0

L. Gachon-y, . J. Sánchez-lópez, . C. Rojas-t, and . Heau-c, Dependence of the friction behaviour of hydrogenated Si-C-N coatings with the bonding structure, Proceedings of the Tenth International Conference on Plasma Surface Engineering, Garmish-Partenkirchen (Allemagne), p.615, 2006.