A. Auder, -Etude des écoulements et réactions chimiques en extrudeuse bivis Approche expérimentale : Utilisation de la distribution des temps de séjours, Thèse de doctorat, 1996.
URL : https://hal.archives-ouvertes.fr/hal-00509091

E. Beran, L. Vandenberghe, and S. Boyd, -A global BMI algorithm based on the generalised bender decomposition, Proc. Of ECC, 1997.
URL : https://hal.archives-ouvertes.fr/hal-01226372

F. Berzin, -Etude expérimentale et modélisation d'une opération d'extrusion réactive, Thèse de doctorat, 1998.
URL : https://hal.archives-ouvertes.fr/hal-00674637

F. Berzin, B. Vergnes, P. Dufossé, and L. Delamare, Modeling of peroxide initiated controlled degradation of polypropylene in a twin screw extruder, Polymer Engineering & Science, vol.11, issue.2, pp.344-356, 2000.
DOI : 10.1002/pen.11168

URL : https://hal.archives-ouvertes.fr/hal-00538223

M. L. Booy, Geometry of fully wiped twin-screw equipment, Polymer Engineering and Science, vol.88, issue.12, pp.973-984, 1978.
DOI : 10.1002/pen.760181212

M. L. Booy, -Isothermal flow of viscous liquids in corotating twin screw devices-, Polym
URL : https://hal.archives-ouvertes.fr/hal-00309586

S. Boyd, L. Elghaoui, E. Feron, and V. Balakrishnan, -Linear matrix inequalities in systems and control theory, Applied Mathematics, vol.15, 1994.
DOI : 10.1137/1.9781611970777

URL : https://hal.archives-ouvertes.fr/in2p3-00025581

P. Cassagnau, C. Mijangos, and A. Michel, An ultraviolet method for the determination of the residence time distribution in a twin screw extruder, Polymer Engineering and Science, vol.25, issue.11, pp.772-778, 1991.
DOI : 10.1002/pen.760311103

P. Cassagnau, -Modification chimique des polymères en extrudeuse-, Habilitation à diriger des recherches, 1994.
URL : https://hal.archives-ouvertes.fr/hal-00807643

N. Cayot, D. Bounie, and H. Baussard, Dynamic modelling for a twin screw food extruder: Analysis of the dynamic behaviour through process variables, Journal of Food Engineering, vol.25, issue.2, pp.245-260, 1995.
DOI : 10.1016/0260-8774(94)00028-8

K. L. Chang and G. W. Halek, Analysis of Shear and Thermal History During Co-Rotating Twin-Screw Extrusion, Journal of Food Science, vol.8, issue.2, pp.518-531, 1991.
DOI : 10.1111/j.1365-2621.1991.tb05317.x

Z. Chang and J. Tan, Determination of model structure for twin-screw food extrusion, Part I: Multi-loop-, Transactions of the Institute of Chemical Engineers, pp.11-19, 1993.

Z. Chang and J. Tan, Determination of model structure for twin-screw food extrusion, Part I: Multi-variable-, Transactions of the Institute of Chemical Engineers, pp.20-26, 1993.

L. Chen and G. H. Hu, Applications of a statistical theory in residence time distributions, AIChE Journal, vol.2, issue.9, pp.1558-1562, 1993.
DOI : 10.1002/aic.690390914

L. Chen, G. H. Hu, and J. T. Lindt, -Acceleration of chemical reaction in reactive extrusion accompanied by devolatilization-, ANTEC'96, pp.295-304, 1996.
URL : https://hal.archives-ouvertes.fr/hal-00109057

Z. Chen and J. L. White, Simulation of Non-isothermal Flow in Twin Screw Extrusion, International Polymer Processing, vol.9, issue.4, pp.310-318, 1994.
DOI : 10.3139/217.940310

S. Choulak, F. Couenne, G. Thoma, P. Cassagnau, and A. Michel, -Methodology for robust control of pressure for ? ? ? ?-caprolactone polymerization in a twin-screw extruder-, Chimia, 55, n°3, pp.244-246, 2001.
URL : https://hal.archives-ouvertes.fr/hal-00357968

S. Choulak, F. Couenne, L. Gorrec, Y. Jallut, C. Cassagnau et al., Generic Dynamic Model for Simulation and Control of Reactive Extrusion, Industrial & Engineering Chemistry Research, vol.43, issue.23, 2004.
DOI : 10.1021/ie0342964

L. Chu and K. Min, Non-Newtonian and isothermal analysis of flow of poly(methyl methacrylate) in a model twin screw extruder. Part I, Polymer Engineering and Science, vol.20, issue.12, pp.986-994, 1994.
DOI : 10.1002/pen.760341207

L. Chu and K. Min, -Non-newtonian and non-isothermal analysis of flow during polymerisation of methyl methacrylate in a model twin screw extruder
URL : https://hal.archives-ouvertes.fr/insu-00857843

J. David and B. De-moor, -Designing Reduced Order Output Feedback Controllers Using a Potential Reducing Method-, American Control Conf, pp.845-849, 1994.
URL : https://hal.archives-ouvertes.fr/in2p3-00656167

R. L. Dayley, -Lectures notes for the Workshop on H ? ? ? ? and µ µ µ µ methods for robust control-, 30 th Conf. On Decision and Control, 1991.

D. Graff, R. A. Rohde, M. Janssen, and L. P. , A novel model predicting the residence-time distribution during reactive extrusion, Chemical Engineering Science, vol.52, issue.23, pp.4345-4356, 1997.
DOI : 10.1016/S0009-2509(97)00189-9

H. De-ruyck, Modelling of the residence time distribution in a twin screw extruder, Journal of Food Engineering, vol.32, issue.4, pp.375-390, 1997.
DOI : 10.1016/S0260-8774(97)00012-5

L. Delamare, -Evolutions morphologiques d'un mélange de polymères incompatibles dans une extrudeuse bivis corotative, Thèse de doctorat, 1995.
URL : https://hal.archives-ouvertes.fr/hal-00509116

D. Valle, G. Barrès, C. Plewa, J. Tayeb, J. Vergnes et al., Computer simulation of starchy products' transformation by twin-screw extrusion, Journal of Food Engineering, vol.19, issue.1, pp.1-31, 1993.
DOI : 10.1016/0260-8774(93)90059-S

J. C. Doyle, K. Glover, P. K. Khargonekar, and B. A. Francis, -State-space solutions to standard H 2 and H ? ? ? ? control problems, IEEE Trans. Autom. Control. AC, vol.34, pp.8-831, 1989.
URL : https://hal.archives-ouvertes.fr/in2p3-00459276

D. Ph, C. Jacobs, and R. Jérôme, -MacomolecularEngineering of polylactones and polylactides Mechanism and Kinetics of lactide Homopolymerisation by Aluminium Isopropoxide-, Macromolecules, pp.2266-2270, 1991.
URL : https://hal.archives-ouvertes.fr/hal-01307255

L. Elgahoui, F. Oustry, and M. Aitrami, -A cone complementary Linearization algorithm for static output feedback and related problems, IEEE Trans. Autom. Control, AC, vol.42, p.8, 1997.

J. Elzinga and T. G. Moore, -A central cutting plane algorithm for the convex programming problem-, Mathematical programming, pp.134-145, 1975.
URL : https://hal.archives-ouvertes.fr/hal-00294326

S. Font, G. Duc, and F. Carrère, -Commande fréquentielle robuste : Application aux paliers magnétiques-, Techniques de l'Ingénieur, traité informatique industrielle, p.432, 1997.
URL : https://hal.archives-ouvertes.fr/hal-00259022

P. Gahinet and A. Ignat, -Low-order H ? ? ? ? synthesis via LMIs-American Control Conf, pp.1499-1500, 1994.
DOI : 10.1109/acc.1994.752316

URL : https://hal.archives-ouvertes.fr/halshs-01244568

P. Gahinet, P. Apkarian, . Linear-matrix-inequality, H. Approach, and . Control, A linear matrix inequality approach toH??? control, International Journal of Robust and Nonlinear Control, vol.29, issue.4, pp.421-448, 1994.
DOI : 10.1002/rnc.4590040403

URL : http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.33.9746

P. Gahinet, -Explicit controller formulas for LMI-based H ? ? ? ? synthesis-, American Control Conf, pp.2396-2400, 1994.
URL : https://hal.archives-ouvertes.fr/halshs-01244568

P. Gahinet, A. Nemirovski, A. Laub, and M. Chilali, -LMI control toolbox-. The Math Works inc, 1995.
DOI : 10.1109/cdc.1994.411440

URL : https://hal.archives-ouvertes.fr/halshs-01244568

K. J. Ganzeveld, J. E. Capel, D. J. Van-der-wal, and L. P. Janssen, The modelling of counter-rotating twin screw extruders as reactors for single-component reactions, Chemical Engineering Science, vol.49, issue.10, pp.1639-1646, 1993.
DOI : 10.1016/0009-2509(93)E0023-6

J. Gao, G. C. Walsh, and D. Bigio, Residence-time distribution model for twin-screw extruders, AIChE Journal, vol.22, issue.12, pp.2541-2549, 1999.
DOI : 10.1002/aic.690451210

J. Gimenez, P. Cassagnau, R. Fulchiron, and A. Michel, -Structure and dynamics of melt poly( ? ? ? ?-caprolactone) from inverse rheological calculation-, Macromolecular Chemestery and physics, pp.479-490, 2000.
URL : https://hal.archives-ouvertes.fr/hal-00857560

J. Gimenez, -Polymérisation de l'? ? ? ?-caprolactone en extrudeuse : étude cinétiques et rhéologique en vue du contrôle du procédé, Thèse de doctorat, 1999.
URL : https://hal.archives-ouvertes.fr/hal-00857560

K. Glover and J. C. Doyle, -State-space formulae for all stabilizing controllers that satisfy an H ? ? ? ? -norm bound and relations to risk sensitivity-, Systems & Control letters, pp.167-172, 1988.
URL : https://hal.archives-ouvertes.fr/in2p3-00956389

T. A. Haley and S. J. Mulvaney, On-line system identification and control design of an extrusion cooking process: Part I. System identification, Food Control, vol.11, issue.2, pp.103-120, 2000.
DOI : 10.1016/S0956-7135(99)00068-7

T. A. Haley and S. J. Mulvaney, On-line system identification and control design of an extrusion cooking process: Part II. Model predictive and inferential control design, Food Control, vol.11, issue.2, pp.121-129, 2000.
DOI : 10.1016/S0956-7135(99)00069-9

A. Hassibi, J. How, and S. Boyd, -A path-following method for solving BMI problems in control, Proc. Of ACC, pp.1385-1389, 1999.

J. M. Hofer and J. Tan, -Extrudate temperature control disturbance prediction-, Food Control, 4, n°1, pp.17-24, 1993.
DOI : 10.1016/0956-7135(93)90123-6

URL : https://hal.archives-ouvertes.fr/inria-00555768

G. H. Hu, I. Kadri, and C. Picot, One-line measurement of the residence time distribution in screw extruders, Polymer Engineering & Science, vol.61, issue.5, pp.930-939, 1999.
DOI : 10.1002/pen.11482

T. Iwasaki and R. E. Skelton, -centring algorithm for the dual LMI problem: a new approach to fixed-order control design, International Journal of Control, vol.62, issue.6, pp.1257-1272, 1995.
DOI : 10.1016/0005-1098(93)90130-L

URL : https://hal.archives-ouvertes.fr/hal-00807794

T. Iwasaki and R. E. Skelton, All controllers for the general H??? control problem: LMI existence conditions and state space formulas, Automatica, vol.30, issue.8, pp.1307-1317, 1994.
DOI : 10.1016/0005-1098(94)90110-4

I. Kadri, -Etude de la distribution des temps de séjour dans une extrudeuse bivis corotative et modélisation de la chimie aux interfaces, Thèse de Doctorat, 1997.
URL : https://hal.archives-ouvertes.fr/hal-00458551

N. A. Karmarkar, -A new polynomial time algorithm for linear programming- Combinatorica, 4, n° 4, pp.373-395, 1984.
URL : https://hal.archives-ouvertes.fr/jpa-00255099

B. Kim and J. L. White, Simulation of thermal degradation, peroxide induced degradation, and maleation of polypropylene in a modular co-rotating twin screw extruder, Polymer Engineering & Science, vol.19, issue.3, pp.576-589, 1997.
DOI : 10.1002/pen.11701

P. J. Kim and J. L. White, Transesterification of ethylene vinyl acetate copolymer in a modular intermeshing corotating twin screw extruder with different screw configurations, Journal of Applied Polymer Science, vol.54, issue.1, pp.33-45, 1994.
DOI : 10.1002/app.1994.070540104

H. R. Kricheldorf, M. Sumbél, and I. Kreiser-saunders, Polymerization of ? ? ? ?- Caprolactone with Tributyltin derivatives: A mechanistic study-, Macromolecules, pp.1944-1949, 1991.

M. K. Kulshreshtha and C. A. Zaror, -An unsteady state model for twin screw extruders-, Trans, IchemE, vol.70, pp.21-28, 1992.
URL : https://hal.archives-ouvertes.fr/jpa-00208976

M. K. Kulshreshtha, C. A. Zaror, and D. J. Jukes, Simulating the performance of a control system for food extruders using model-based set-point adjustment, Food Control, vol.6, issue.3, pp.135-141, 1995.
DOI : 10.1016/0956-7135(94)00006-Y

M. K. Kulshreshtha, C. A. Zaror, D. J. Jukes, and D. L. Pyle, -A generalized steady state model for twin screw extruders-, Trans, IchemE, vol.69, pp.189-199, 1991.
URL : https://hal.archives-ouvertes.fr/jpa-00208976

H. Kye and J. L. White, Simulation of Continuous Polymerization in a Modular Intermeshing Co-rotating Twin Screw Extruder, International Polymer Processing, vol.11, issue.2, pp.129-138, 1996.
DOI : 10.3139/217.960129

C. Li, -Modelling extrusion cooking-, Mathematical and Computer Modelling, pp.553-563, 2001.
URL : https://hal.archives-ouvertes.fr/tel-00807841

Q. Lu, S. J. Mulvaney, F. Hsieh, and H. E. Huff, -Model and strategies for computer control of a twin-screw extruder-, Food Control, pp.25-33, 1993.
URL : https://hal.archives-ouvertes.fr/hal-00908450

J. F. Magni, -Modal Control Toolbox User's Guide-, CERT-ONERA, p.31055
URL : https://hal.archives-ouvertes.fr/halshs-00159772

F. G. Martelli, -Twin screw extrusions: a basic understanding, 1982.
URL : https://hal.archives-ouvertes.fr/in2p3-00608259

W. Michaeli and A. Grefenstein, An Analytical Model of the Conveying Behaviour of Closely Intermeshing Co-rotating Twin Screw Extruders, International Polymer Processing, vol.11, issue.2, pp.121-128, 1996.
DOI : 10.3139/217.960121

W. Michaeli, A. Grefenstein, and U. Berghaus, Twin-Screw extruders for reactive extrusion, Polymer Engineering and Science, vol.18, issue.2, pp.1485-1504, 1995.
DOI : 10.1002/pen.760351902

R. Moreira, A. Srivastava, and J. Gerrish, -Feedforward control model for twin screw food extruder-, Food Control, pp.179-184, 1990.
URL : https://hal.archives-ouvertes.fr/hal-00159666

Y. Nesterov and A. Nemirovski, -A general approach to polynomial-time algorithm design for convex programming, Centr. Econ. Math Inst. USSR Acad Sci, 1988.
URL : https://hal.archives-ouvertes.fr/in2p3-00694311

Y. Nesterov and A. Nemirovski, -Interior point polynomial methods in convex programming: theory and applications, SIAM Studies in Applied Mathematics, vol.13, 1994.
URL : https://hal.archives-ouvertes.fr/in2p3-00694311

T. Nietsch, P. Cassagnau, and A. Michel, -Melt temperature and residence times in an extruder by infrared spectroscopy -, Inter. Polym, Proc, vol.12, issue.4, pp.307-315, 1997.

R. Nikoukha, F. Delebeque, and L. Elghaoui, A package for LMI optimisation in scilab, 1995.

I. Noé, -Etude des écoulements de polymères dans une extrudeuse bivis corotative, Thèse de doctorat, 1992.
URL : https://hal.archives-ouvertes.fr/hal-00758449

J. Oberlerhner, C. Ph, and A. Michel, Local residence time distribution in a twin screw extruder, Chemical Engineering Science, vol.49, issue.23, pp.3897-3907, 1994.
DOI : 10.1016/0009-2509(94)00190-1

P. Peres, J. C. Geromel, J. Bernussou, and . H. Siguerdidjane, -Acutting plane technique applied to robust control synthesis, proceedings of the 8 th IFAC workshop, pp.105-109, 1989.
DOI : 10.1016/b978-0-08-037869-5.50022-4

URL : https://hal.archives-ouvertes.fr/hal-00109342

H. Potent, H. Lappe, and A. Fornefeld, -Verweilzeit bei Einschnecken-extrudern : wie sich messtechnische aufwand in grenzen hält-, Plasteverarbeiter, pp.31-33, 1984.

H. Potente, J. Ansahl, and R. Wittemeier, Throughput characteristics of Tightly Intermeshing Co-rotating Twin Screw Extruders, International Polymer Processing, vol.5, issue.3, p.208, 1990.
DOI : 10.3139/217.900208

A. Poulesquen and B. Vergnes, A study of residence time distribution in co-rotating twin-screw extruders. Part I: Theoretical modeling, Polymer Engineering & Science, vol.16, issue.12, pp.1841-1848, 2004.
DOI : 10.1002/pen.10156

URL : https://hal.archives-ouvertes.fr/hal-00531608

A. Poulesquen, -Contribution à la modélisation de l'extrusion réactive en machine bi-vis-, Thèse de doctorat, 2001.
URL : https://hal.archives-ouvertes.fr/hal-01108915

A. Poulesquen, B. Vergnes, C. Ph, M. A. Carneiro, and O. S. , A study of residence time distribution in co-rotating twin-screw extruders. Part II: Experimental validation, Polymer Engineering & Science, vol.17, issue.93, pp.1849-1862, 2004.
DOI : 10.1002/pen.10157

URL : https://hal.archives-ouvertes.fr/hal-00531608

L. Prat, P. Guiraud, C. Gourdon, and S. &-n-'diaye, -Transport d'un milieu complexe polyphasique matériau végétal/solvant en extruder bi-vis-, 6 ème CFGP, Récents progrès en Génie des Procédés, pp.53-77, 1997.
URL : https://hal.archives-ouvertes.fr/hal-00707990

L. Prat, P. Guiraud, L. Rigal, and C. Gourdon, -Solid-liquid reactive extraction with raw plant substance, Proceedings of the Second European Congress of Chemical Engineering?ECCE, 1999.
URL : https://hal.archives-ouvertes.fr/hal-00707990

L. Prat, S. N-'diaye, L. Rigal, and C. Gourdon, -Solid-liquid transport in a modified corotating twin-screw extruder?dynamiquc simulator and experimental validation-, Chem. Eng, Proc. 43, n° 7, pp.881-886, 2004.
URL : https://hal.archives-ouvertes.fr/hal-00707990

J. P. Puaux and A. Ainser, -Residence time distribution of a twin-screw extruder-, ANTEC'94, pp.1500-1503, 1994.
URL : https://hal.archives-ouvertes.fr/medihal-01326399

J. P. Puaux, G. Bozga, and A. Ainser, Residence time distribution in a corotating twin-screw extruder, Chemical Engineering Science, vol.55, issue.9, pp.1641-1651, 2000.
DOI : 10.1016/S0009-2509(99)00430-3

M. G. Safonov, D. J. Limebeer, and R. Y. Chiang, -Simplifying the H ? ? ? ? theory via loopshifting , Matrix-Pencil and Descriptor Concepts, Int. J. Control, pp.50-56, 1989.
URL : https://hal.archives-ouvertes.fr/in2p3-00509098

G. Scorletti and V. Fromion, -Introduction à la commande multivariable des systèmes: méthode de synthèse, 2001.
URL : https://hal.archives-ouvertes.fr/hal-00655803

G. Scorletti, -Introduction à l'optimisation LMI pour l'automatique-Polycopié, 2004.
URL : https://hal.archives-ouvertes.fr/hal-00655803

B. Singh and S. J. Mulvaney, Modeling and process control of twin-screw cooking food extruders, Journal of Food Engineering, vol.23, issue.4, pp.403-428, 1994.
DOI : 10.1016/0260-8774(94)90102-3

W. Szydlowsky and J. L. White, -A non newtonian model of flow in a kneading disc region of a modular intermeshing corotating twin-screw extruder-, J. Non Newt. Fluid mech, pp.29-46, 1988.

W. Szydlowsky and J. L. White, An improved theory of metering in an intermeshing corotating twin-screw extruder, Advances in Polymer Technology, vol.7, issue.2, pp.177-183, 1987.
DOI : 10.1002/adv.1987.060070206

W. Szydlowsky and J. L. White, -Improved model of flow in the kneading disc region of an intermeshing co-rotating twin screw extruder-, Inter, Polym Proc., 2, pp.142-150, 1988.

W. Szydlowsky, R. Brzoskowski, and J. L. White, Modelling Flow in an Intermeshing Co-rotating Twin Screw Extruder: Flow in Kneading Discs, International Polymer Processing, vol.1, issue.4, pp.207-214, 1987.
DOI : 10.3139/217.870207

J. Tan and J. M. Hoffer, Self-tuning predictive control of processing temperature for food extrusion, Proc. Cont., 5, n° 3, pp.183-189, 1995.
DOI : 10.1016/0959-1524(94)00003-U

J. Tayeb, D. Valle, G. Barrès, C. Vergnes, and B. , -Simulation of transport phenomena in twin screw extruders-, in: " Food extrusion, Science and Technology, 1992.
URL : https://hal.archives-ouvertes.fr/hal-00186552

J. Tayeb, B. Vergnes, and G. Della-valle, A Basic Model for a Twin-Screw Extruder, Journal of Food Science, vol.4, issue.1, pp.1047-1056, 1989.
DOI : 10.1111/j.1365-2621.1989.tb07941.x

J. Tayeb, B. Vergnes, and G. Della-valle, Theoretical Computation of the Isothermal Flow Through the Reverse Screw Element of a Twin Screw Extrusion Cooker, Journal of Food Science, vol.8, issue.1, pp.616-625, 1988.
DOI : 10.1111/j.1365-2621.1988.tb07769.x

D. B. Todd, Residence time distribution in twin-screw extruders, Polymer Engineering and Science, vol.34, issue.6, pp.437-443, 1975.
DOI : 10.1002/pen.760150607

D. Tood, -Heat transfert in twin-screw extruders, pp.54-58, 1988.
URL : https://hal.archives-ouvertes.fr/jpa-00242458

C. Tsai and C. Lu, Multivariable self-tuning temperature control for plastic injection molding process, IEEE Transactions on Industry Applications, vol.34, issue.2, pp.310-318, 1998.
DOI : 10.1109/28.663473

B. Vergnes and J. F. Agassant, -Modélisation des écoulements dans les filières d'extrusion -, Techniques de l'Ingénieur, traités Plastiques et Composites, pp.655-656, 1993.
URL : https://hal.archives-ouvertes.fr/hal-01108915

B. Vergnes, D. Valle, G. Delamare, and L. , A global computer software for polymer flows in corotating twin screw extruders, Polymer Engineering & Science, vol.11, issue.11, pp.1781-1792, 1998.
DOI : 10.1002/pen.10348

URL : https://hal.archives-ouvertes.fr/hal-00573794

B. Vergnes, G. Souveton, and M. L. Delacour, -Experimental and theoretical study of polymer melting in a corotating twin screw extruder-, Inter, 2001.
URL : https://hal.archives-ouvertes.fr/hal-01108915

J. Villermaux, -Génie de la réaction chimique, conception et fonctionnement des réacteurs-, Technique et Documentation Lavoisier, 1995.
URL : https://hal.archives-ouvertes.fr/insu-01308901

Y. Wang and J. Tan, -Dual-target predictive control and application in food extrusion-, Control Eng. Practice, pp.1055-1062, 2000.
URL : https://hal.archives-ouvertes.fr/jpa-00209906

Y. Wang and J. L. White, -Non-Newtonian flow modelling in the screw regions of an intermeshing corotating twin-screw extruder-, J. Non Newt. Fluid mech, pp.19-38, 1989.
URL : https://hal.archives-ouvertes.fr/jpa-00209906

Y. Wang, J. L. White, and W. Szydlowsky, Flow in a Modular Intermeshing Co-rotating Twin Screw Extruder, International Polymer Processing, vol.4, issue.4, pp.262-269, 1989.
DOI : 10.3139/217.890262

H. Werner and . Das, Betriebsverhalten des zweiwelligen knetscheiben schnecken press von type ZSK bei der verarbeitung von hochvisckosen flüssigkeiten-, Dr. Ing. Dissertation, 1976.
DOI : 10.1002/cite.330490427

W. A. Yacu, MODELING A TWIN SCREW CO-ROTATING EXTRUDER, Journal of Food Process Engineering, vol.3, issue.4, pp.1-21, 1985.
DOI : 10.1002/pen.760150807