M. Aldanondo, C. Et, and P. , Réactivité, ingénierie concourante et cycle d'industrialisation, IDMME 96, 1996.

A. , L. Et, Z. , and H. , Computer Aided Process Planning : the state-ofthe-art survey, International Journal of Production Research, vol.27, issue.4, pp.553-585, 1989.

A. Anselmetti and B. , Génération automatique de gammes de tournage et contribution à la gestion d'une cellule de production, Habilitation à diriger des recherches, 1994.

A. Appel, Some techniques for shading machine renderings of solids, Proceedings of the April 30--May 2, 1968, spring joint computer conference on, AFIPS '68 (Spring), pp.37-45, 1968.
DOI : 10.1145/1468075.1468082

M. Bala, C. Et, and T. , Automatic cutter selection and optimal cutter path generation for prismatic parts, International Journal of Production Research, vol.1, issue.11, pp.2163-2176, 1991.
DOI : 10.1016/S0007-8506(07)60957-3

M. Balasubramaniam, Generating 5-axis NC roughing paths directly from a tessellated representation, Computer-Aided Design, vol.32, issue.4, pp.261-277, 2000.
DOI : 10.1016/S0010-4485(99)00103-7

M. Balasubramaniam, S. E. Sarma, M. Et, and K. , Collision-free finishing toolpaths from visibility data, Computer-Aided Design, vol.35, issue.4, pp.359-374, 2003.
DOI : 10.1016/S0010-4485(02)00057-X

D. D. Bedworth, M. R. Henderson, W. Et, and P. M. , Computer- Integrated Design and Maufacturing, Editions McGraw-Hill, 1991.

O. Bellart, Remplissage d'un réseau de courbes par une surface avec contrôle actif de la qualité, Congrès MICAD 90, pp.616-631, 1990.

P. Belloy, Intégration de connaissances métier dans la conception : un modèle pour les pièces mécaniques. Application à l'usinage et à l'esatmpage, Thèse de doctorat, 1994.

B. , A. Bernard, and A. , Modèles et approches pour la conception et la production intégrées Outil stratégique pour la phase d'industrialisation, chapitre n°1 de l'ouvrage : Fabrication assistée par ordinateur, sous la direction de, Journal Européen des Systèmes Automatisés, vol.34, issue.2, pp.22-31, 2000.

. B. Berra-p, B. Et, and M. M. , Investigation of automated planning and optimization of metal working processes, 1968.

E. J. Bezdek, Volumetric Feature Recognition for Direct Engineering, chapitre de l'ouvrage : Direct Engineering : Toward Intelligent Manufacturing, Editions Kluwer Academic, pp.15-69, 1999.

W. Boehm and G. Farin, Differential Geometry I, chapitre n°11 de l'ouvrage : Curves and surfaces for CAGD, a pratical guide, sous la direction de, Editions LAVOISIER, pp.171-180, 1996.

W. Boehm and G. Farin, Differential Geometry II, chapitre n°22 de l'ouvrage : Curves and surfaces for CAGD, a pratical guide, sous la direction de, Editions LAVOISIER, pp.348-362, 1996.

C. Bozon, Intégration de connaissances de fabrication dans un contexte de CFAO : une approche expérimentale, 17ème congrès français de mécanique, 2005.

D. Brissaud, Conception Automatique de gammes d'usinage : point de vue Expertise, chapitre de l'ouvrage : La gamme automatique en usinage, sous la direction de : Groupe GAMA, Editions Hermès, 1990.

D. Brissaud, Système de conception automatique de gammes d'usinage pour les industries manufacturières, Thèse de doctorat, 1992.

D. Brissaud, W. Budde, V. Capponi, V. Capponi, F. Villeneuve et al., Contribution à la modélisation des processus d'usinage dans un contexte de conception intégrée de produits, Habilitation à diriger des recherches EXAPT in NC operations planning, 10th numerical control society annual meeting and technical conference Les interactions homme-machine dans la génération assistée de gammes d'usinage : application aux pièces aéronautiques de structure Handling of alternative processes for machining of aeronautical parts in a CAPP system, Thèse de doctorat Thèse de doctorat, 1973.

T. Chang, Expert process planning for manufacturing, 1990.

T. Chang, W. Et, and R. A. , An introduction to automated process planning systems, 1985.

C. , L. , C. , S. Et, W. et al., Parting directions for mould and die design, Computer-Aided Design, vol.25, pp.763-767, 1993.

A. Chep, Modèle de représentation et d'utilisation des connaissances nécessaires à la conception d'un processus de fabrication : application à la génération automatique de gammes d'usinage en tournage, Thèse de doctorat, 1992.

A. Chep, Méthodologie de génération des processus, chapitre n°4 de l'ouvrage : Fabrication Assistée par Ordinateur, sous la direction de, pp.143-204, 2002.

A. Chep, L. Tricarico, P. Bourdet, G. Et, and L. , Design of object-oriented database for the definition of machining operation sequences of 3D workpieces, Computers & Industrial Engineering, vol.34, issue.2, pp.257-259, 1998.
DOI : 10.1016/S0360-8352(97)00326-4

B. Choi, M. Barash, A. Et, and D. C. , Automatic recognition of machined surfaces from a 3D solid model, Computer-Aided Design, vol.16, issue.2, pp.81-86, 1984.
DOI : 10.1016/0010-4485(84)90164-7

C. , J. Et, C. , and D. , Method for finding holes and pockets that connect multiple faces in 2D1/2 objects, Computer-Aided Design, vol.26, issue.3, pp.215-224, 1991.

C. , M. Tenenbaum, J. M. Et, M. , and D. , Features in process based design, ASME Computers in Engineering Conference, pp.557-562, 1988.

D. , P. Et, S. , and G. , Viewpoint development for requirements definition : towards a conceptual fraemwork, 6th Australian Conference on Information Systems (ACIS'95), pp.227-228, 1995.

L. De-floriani and D. Deneux, Feature extraction from boundary models of three-dimensional objects, Thèse de doctorat, Université de Valenciennces (France), pp.785-798, 1989.
DOI : 10.1109/34.31442

. W. Derigent, . Harik-r, and R. G. Lombard-m, Development and integration of a 5 axis flank milling feature into a STEP Model, 17th IMACS World Congress, pp.11-15, 2005.
URL : https://hal.archives-ouvertes.fr/hal-00122985

D. W. , R. S. , R. G. , W. , R. et al., Method of automatic digitalisation : a new approach of the visibility calculation of an object Method of automatic digitalisation: a new approach of the visibility calculation of an object, International Journal of Manufacturing Technology and Management Inderscience ISSN, vol.6, issue.6, pp.550-566, 2003.

C. Derras, Formalisation de l'imprécision informationnelle et des incertitudes décisionnelles des connaissances expertes pour la génération de processus de fabrication, Thèse de doctorat, 1998.

D. , Y. Et, L. , and J. Y. , GARI : A problem solver that plans how to machine mechanical parts, Automating knowledge acquisition for expert systems, 1981.

E. Dupinet, Contribution à l'étude d'un système information d'aide à la conception de produits mécaniques, Thèse de doctorat, 1991.

P. Duverlie, C. Et, and J. M. , Anatour : Intégration des techniques de raisonnement à partir de cas dans un système CAO pour l'estimation du coût des pièces de révolution, Colloque PRIMECA 95, pp.19-26, 1995.

G. Elber, Z. Et, E. , W. Fuchs, H. Et et al., Cone visibility decomposition of freeform surface, Computer-Aided Design, vol.30, issue.4, pp.315-320, 1980.
DOI : 10.1016/S0010-4485(97)00077-8

J. Ferriera, H. Et, S. Gadh, R. Et, P. et al., Convex hull based feature recognition method for 2.5D components Recognition of geometric forma using the differential depth filter, Computer-Aided Design Computer-Aided Design, vol.2224, issue.16, pp.41-49583, 1990.

G. , S. Et, S. , and J. J. , Automatic recognition of interacting features based on MSCG, Computer-Aided Design, vol.30, issue.9, pp.727-739, 1998.

. Gee and R. Geelink, Flexible definition of forms features, Thèse de doctorat, 1996.

. Gee and R. Geelink, Unified feature definition for feature-based design and feature-based modeling, ASME Computers in Engineering Conference, pp.517-534, 1995.

R. Geslot, CETIM ADC coupe, l'outil qui met l'optimisation des conditions de coupe à la portée de toutes les entreprises, CETIM Informations, vol.85, 1984.

F. Giacometti, C. Et, T. Gindy, and N. N. , Object-orient design for modelling parts, assemblies and tolerances, Technology of Object-Orient Laguages ans Systems A hierarchical structure for form features, International Journal of Production Research, vol.27, issue.2, pp.243-255, 1989.

I. Graham, Migrer vers la technologie objets, 1997.

A. R. Grayer, A Computer Link Between Design And Manufacture, Thèse de doctorat, 1976.

G. Groupe, Modélisation par entités, chapitre n°14 de l'ouvrage : Conception de produits mécaniques, sous la direction de : TOLLENAERE M., Editions Hermès, pp.324-345, 1998.

A. R. Guerra, H. Et, and S. , Modelling turned components with non-axisymmetric features, Computer-Aided Design, vol.29, issue.5, pp.343-359, 1997.
DOI : 10.1016/S0010-4485(96)00052-8

S. K. Gupta, N. Et, and D. S. , Systematic approach to analysing the manufacturability of machined parts, Computer-Aided Design, vol.27, issue.5, 1995.
DOI : 10.1016/0010-4485(95)96797-P

J. H. Han, M. Pratt, R. Et, and W. , Manufacturing Feature Recognition from Solid Models: A Status Report, IEEE Trans.on Robotics and Automation, 2000.

H. M. Et, A. , D. C. Hilbert, D. Cohen-vossen, and S. , Computer recognition and extraction of form features Computational Geometry for optimal workpiece orientation, Advanced in Design Automation, pp.329-339169, 1984.

R. Jakubowski, S. Joshi, C. Et, and T. , Syntactic characterization of machine parts shapes Graph-based heuristics for recognition of machined featured features from a 3D solid model, Cybernetic Systems, An International Journal Computer-Aided Design, vol.1320, issue.12, pp.1-2458, 1982.

. Kan, J. Kang, S. Et, and S. , Machinability and set-up orientation for five-axis numerically controlled machining of free surfaces, International Journal of Advanced Manufacturing Technology, vol.13, pp.311-325, 1997.

E. Kaufmann, K. Et, and R. , Smoothing surfaces using reflection lines for families of splines, Computer-Aided Design, vol.20, issue.6, pp.312-316, 1988.
DOI : 10.1016/0010-4485(88)90112-1

. Kim, D. S. Kim, P. Y. Papalambros, W. Et, and T. C. , Tangent, normal, and visibility cones on B??zier surfaces, Tangent, normal, and visibility cones on Bézier surfaces, pp.305-320, 1995.
DOI : 10.1016/0167-8396(94)00016-L

. Kim and Y. S. Kim, Recognition of form features using convex decomposition, Computer-Aided Design, vol.24, issue.9, pp.461-476, 1992.
DOI : 10.1016/0010-4485(92)90027-8

. Kim, Y. S. Kim, J. J. Shah, M. , M. et al., Volumetric feature recognition using convex decomposition, chapitre de l'ouvrage : Advances in Feature based Manufacturing, sous la direction de, Editions Elsevier Science, pp.39-63, 1994.

R. Klass, Correction of local surface irregularities using reflection lines, Computer-Aided Design, vol.12, issue.2, pp.73-77, 1980.
DOI : 10.1016/0010-4485(80)90447-9

. Kum and G. S. Kumar, Development of AI-Based automated process planning systems, 3rd International Conference on CAD/CAM Robotics and Factories of the future, pp.202-206, 1988.

S. Kweon, M. Et, and D. J. , Part orientations for CMM inspection using dimensioned visibility maps, Computer-Aided Design, vol.30, issue.9, pp.741-749, 1998.
DOI : 10.1016/S0010-4485(98)00034-7

L. Kyprianou, Shape Classification in Computer-Aided Design, Thèse de doctorat, 1980.

L. , T. Lee, Y. C. Et, J. , and F. J. , Incremental feature modeling : methodology for integrating features and solid models Université de technologie d'Helsinki, Helsinki (Norvège) A new CSG tree reconstruction algorithm for feature representation, Thèse de doctorat Computers in Engineering Conference (CIE), pp.521-528, 1988.

E. Lefur and . Mathieu, Méthodes d'optimisation sous contraintes appliquées à la détermination des conditions de coupe, chapitre de l'ouvrage : La gamme automatique en usinage, sous la direction de : Groupe GAMA, Editions Hermès, pp.143-159, 1990.

. Leo and J. Leon, Techniques d'analyse des surfaces, chapitre n°14 de l'ouvrage : Modélisation et construction de surfaces pour la CFAO, pp.450-462, 1985.

. Lim, T. Lim, J. Corney, C. Et, and D. E. , Exact Tool Sizing for Feature Accessibility, The International Journal of Advanced Manufacturing Technology, vol.16, issue.11, pp.791-802, 2000.
DOI : 10.1007/s001700070013

C. H. Link, . Capp-cam, C. G. Little, C. J. Et, T. et al., Automated Process Planning Delta volume decomposition for multi-sided components, 13th Numerical Control Society Conference, Cincinanati, Ohio (USA), pp.695-706, 1976.

M. , M. Et, H. , and R. , De l'intégration de modèles vers l'ajustement d'un modèle unique de données en ingénierie intégrée, IDMME 2000 Integrated Design and Manufacturing in Mechanical Engineering Geometric reasoning for recognition of three-dimensional object features, IEEE Trans.on Pattern Analysis and Machine Intelligence, vol.12, issue.10, 1990.

M. Marefat, J. Et, Q. Matushima, K. Okada, N. Et et al., Extracting and indentifying form features : A Bayesian approach The integration of CAD & CAM by application of AI techniques, IEEE International conference on Robotics and Automation Annals of the CIRP, vol.31, issue.1, pp.1959-1964, 1982.

K. Mawussi, Modèle de représentation et de défintion d'outillages de forme complexe Application à la génération automatique de processus d'usinage, Thèse de doctorat, 1995.

S. Menon and K. Y. , Hanling blending features using convex decomposition, ASME Computers in Engineering Conference (CIE), vol.1, pp.79-92, 1994.

S. Menon, K. Et, and Y. S. , Cylindrical Features in form feature recognition using convex decomposition, IFIP Conference on Feature Modeling and Recognition in Advanced CAD, 1994.

. Mia and H. Miao, NC machining feature recognition and automated process planning, Thèse de doctorat, 1998.

. Mia, H. Miao, N. Sridharan, S. Et, and J. J. , CAD-CAM integration using machining features, International Journal of Computer Integrated Manufacturing, vol.26, issue.4, pp.296-318, 2002.
DOI : 10.1016/S0010-4485(97)00090-0

O. Million, De l'intégration des métiers par les données techniques vers la maîtrise de la modélisation conceptuelle : la méthode V.I.M. (Viewpoints Information Modelling, Thèse de doctorat, 1998.

P. Mognol, Contribution à la génération automatique de fammes en tournage : génération dirigée par évaluation progressive, Thèse de doctorat, 1994.

C. Mony, E. Dupinet, B. A. Et, and O. , Un modèle intégré de définition de produit mécanique pour l'usinage et l'obtention de bruts préformés Validation des caractéristiques d'usinage par des grammaires d'usinage attributées : une contribution à la prise en compte des contraintes d'usinage en cours de conception, Thèse de doctorat, 1991.

B. Muttel, Computer-Aided Group Technology Integrated System, CIRP Annals - Manufacturing Technology, vol.37, issue.1, 1988.
DOI : 10.1016/S0007-8506(07)61669-2

O. , E. Paris, and H. , Contribution à l'étude d'une méthode de reconnaissance de Feature pour les systèmes de CAO mécanique Contribution à la conception automatique des gammes d'usinage, 1995.

P. , D. Chen, Z. Et, L. , and R. , Automatic 3D machining feature extraction from 3D CSG solid input, Computer-Aided Design, vol.22, issue.5, pp.285-295, 1990.

P. , M. Poeschl, and T. , La complexité dans la modélisation du système d'information de l'entreprise. Propositions de solutions : concepts, outils et démarches., Habilitation à Diriger des Recherches Detecting surface irregularities using isophotes, Computer- Aided Geometric Design, vol.1, issue.2, pp.193-198, 1984.

R. W. Gupta, S. K. Et, N. , and D. S. , Toward multiprocessor feature recognition, Computer-Aided Design, vol.29, issue.1, pp.37-51, 1997.

R. W. Et, N. , and D. , Building a general approach to feature recognition of material removal shape element volumes (MRSEVs, 2nd ACM Solid Modeling, 1993.

R. W. Gupta, S. Et, N. , and D. , Extracting alternative machining features : an algorithmic approach, 1995.

S. Remy, B. Et, and A. , Génération automatique de processus d'acquisition de formes, 2000.

S. Remy, A. Bernard, R. Et, and G. , Automatic digitalization based on the concept of visibility, IDMME 2002 Integrated Design and Manufacturing in Mechanical Engineering, 2002.

R. , P. Hascoet, J. Y. Et, B. , and F. , Workpiece setup and machine-tool choice in milling, International Conference on Industrial Engineering and Poduction Management, 1997.

L. Sabourin, L'expertise en conception de gammes d'usinage : approches par entités et propagation de contraintes, 1995.

S. , H. Sakurai, H. Et, C. Shah, J. J. Mäntylä et al., Volume decomposition and feature recognition : part 1 - Polyhedral Objects Definition and recognition of volume features for process planning, chapitre de l'ouvrage : Advances in feature based manufacturing, sous la direction de, Computer-Aided Design, vol.28, issue.6, pp.833-84365, 1994.

S. , H. Et, D. , and P. , Volume decomposition and feature recognition : Part 2 -Curved objects, Computer-Aided Design, vol.28, issue.6, pp.517-537, 1996.

S. , O. W. Van-houten, F. J. Et, K. , and H. J. , Review of research in feature-Based Design, Journal of Manufacturing systems, vol.12, issue.2, pp.113-132, 1993.

G. Shafer, A mathematical theory of evidence, 1976.

J. J. Shah, Assessment of features technology, Computer-Aided Design, vol.23, issue.5, pp.282-296, 1991.
DOI : 10.1016/0010-4485(91)90027-T

J. J. Shah, A. , D. C. , and K. Y. , A Discourse on Geometric Feature Recognition From CAD Models, Journal of Computing and Information Science in Engineering, vol.1, issue.1, pp.41-51, 2001.
DOI : 10.1115/1.1345522

J. J. Shah, The ASU Features Testbed : An overview, ASME Computers in Engineering Conference, pp.233-241, 1990.

J. J. Shah, M. Et, and M. , Parametric and feature-based CAD, 1995.

J. J. Shah, M. Et, D. W. Shen, Y. Et, S. et al., Experimental investigation of the step form-feature information model, 20th ASME Design Automation Conference, pp.282-296575, 1991.
DOI : 10.1016/0010-4485(91)90068-8

S. , G. Sonithi, R. Kunjur, G. Et, G. et al., Concurrent Engineering Shape feature determination using the curvature region representation, Annals of the CIRP, vol.41, issue.2, pp.285-296, 1992.

S. , S. N. Spyridi, A. J. Et, R. , and A. , Accessibility analysis for planning of dimensional inspection with coordinate measuring machines, IEEE International conference on Robotics and Automation, vol.15, issue.4, pp.714-727, 1999.

S. , A. J. Spyridi, A. J. Et, R. , and A. , Automatic generation of high level inspection plans for coordinate measuring machines Accessibility for the automatic inspection of mechanical parts by coordinate measuring machines, Thèse de doctorat, Université de Caroline du Sud (USA), pp.1284-1289, 1990.

N. Sridharan, Classification, parametrization, and recognition of NC machining features with sculptured surfaces, Diplôme d'Etudes Approfondies en Génie Mécanique, 2000.

S. , S. M. Henderson, M. R. Et, A. , D. C. Stanger et al., Using syntactic pattern recognition to extract feature information from a solid geometric database Environnments for viewpoint representations, 5th European Conference Information Systems (ECIS'97 Cork (Irlande), pp.61-66, 1983.

S. Suh, K. , J. Sun, G. Sequin, C. H. Et et al., Process planning for multi-axis NC machining of free surfaces Operation decomposition for freeform surface features in process planning, International Journal of Production Research Computer-Aided Design, vol.3333, issue.10, pp.2723-2738621, 1995.

G. Sun, Operation decomposation for freeform surface features in process planning Volumetric feature recognition for machining components with freeform surfaces, ASME Design Engineering Technical Conferences, pp.11-25, 1999.

Y. Tabourier, De l'autre côté de Merise Systèmes d'information et modèles d'entreprise, Editions d'Organisation, 1986. [TIC 91] TICHKIEWITCH S., PRIMECA, a French project for the creation of engineer's formations in mechanical integrated computer design, 4th International IFIP TC5 Conference on Computer Application in Production and Engineering : Integrated Aspectss CAPE'91, pp.259-266, 1991.

A. Meeran, S. Et, C. , and M. , Recognizing cavity volumes using a Cell Evaluated and Directed Adjacency Graph (CEDAG), Revue Internationale de CFAO et d'informatique graphique, pp.607-622, 1995.

S. Et, K. , and R. , Geometric reasoning for extraction of manufacturing features in iso-oriented polyhedrons, IEEE Trans.on Pattern Analysis and Machine Intelligence, vol.16, issue.11, pp.1087-1100, 1993.

J. P. Tsang, Planification par combinaison de plan Application à la génaration automatique de gammes d'usinage, Thèse de doctorat, 1987.

Y. Tseng, J. Et, and S. , Determining feasible tool-approach directions for machining B??zier curves and surfaces, Computer-Aided Design, vol.23, issue.5, pp.367-369, 1991.
DOI : 10.1016/0010-4485(91)90030-Z

Y. Tseng, J. Et, and S. , Recognizing multiple interpretations in 2??D machining of pockets, International Journal of Production Research, vol.12, issue.5, pp.1063-1086, 1994.
DOI : 10.1016/0010-4485(90)90093-R

J. Tulkoff, Lockheed's GENPLAN, 18th Num, Control Society Annual Meeting and Techical Conference, 1981.

G. Turner, A. Et, and D. C. , An object oriented approach to interactive, feature based design for quick turnaround manufacturing, ASME Computers in Engineering Conference (CIE), 1988.

F. J. Van-houten, J. Vanderbrande, R. Et, A. Vanderbrande, and J. , PART : A computer aided process planning system, Thèse de doctorat Spatial reasoning for the automatic recognition of machinable feature in solid models Geometric computation for the recognition of spatially interacting machining features, chapitre n°5 de l'ouvrage : Advances in Feature Based Manufacturing, sous la direction de, IEEE Trans.on Pattern Analysis and Machine Intelligence, vol.15, issue.12, pp.1269-128583, 1991.

D. Veeramani, G. Et, and Y. , Selection of an optimal set of cutting-tool sizes for 2D pocket machining, 5D pocket machining, pp.869-877, 1997.
DOI : 10.1016/S0010-4485(97)00042-0

F. Villeneuve, Génération automatique des processus de fabrication, chapitre n°7 de l'ouvrage : Fabrication Assistée par Ordinateur, sous la direction de, pp.295-350, 2003.

S. Waco and K. Y. , Geometric reasoning for machining features using convex decomposition, Computer-Aided Design, vol.26, issue.6, pp.477-489, 1994.
DOI : 10.1016/0010-4485(94)90069-8

. Wei, M. Weinstein, M. Et, and S. , Geometric influence of a molded part on the draw direction range and parting line direction, Journal of Mechanical Design, vol.118, pp.29-39, 1996.

. Wei, M. Weinstein, M. Et, and S. , Optimum parting line design of molded and cast parts for manufacturability, Conference on CAD/CAM Technology in Mechanical Engineering Visibility map and spherical algorithms, pp.1-1176, 1982.

A. J. Wright, EXCAP and ICAPP : Integrated knowledge based systems for process planning components, 19th CIRP International Seminar on Manufacturing Systems, 1987.

X. Xu, H. Et, and S. , Recognition of rough machining features in 2D components, Computer-Aided Design, vol.30, issue.7, pp.503-516, 1998.
DOI : 10.1016/S0010-4485(97)00090-0

Y. , W. Y. Ding, H. , X. , and Y. L. , Manufaturability analysis for sculptured surface using visibility cone computation, 2000.

. Yao, Z. Yao, S. K. Gupta, and D. S. , A Geometric Algorithm for Finding the Largest Milling Cutter, Journal of Manufacturing Processes, vol.3, issue.1, pp.1-16, 2003.
DOI : 10.1016/S1526-6125(01)70029-1

. Yao, Z. Yao, S. K. Gupta, N. Et, D. S. Yin et al., Algorithms for selecting cutters in multi-part milling problems Visibility theory and algorithms with application to manufacturing processes, Computer-Aided Design International Journal of Production Research, vol.3538, issue.13, pp.825-839, 2000.

Y. , G. A. Et, C. , and T. , A five-step object-oriented architecture for process planning, International Journal of Production Research, vol.32, issue.3, pp.545-562, 1994.