H. Beitzel, Efficiency of Concrete Mixers ? Report on Assessment and Classification of Performance of Mixers, 1998.

Y. Charonnat and H. Beitzel, Report: Efficiency of concrete mixers towards qualification of mixers, Materials and Structures, vol.30, issue.S1, pp.28-32, 1997.
DOI : 10.1007/BF02539273

D. Chopin, Malaxage des bétons à hautes performances et des bétons auto-plaçants : Optimisation du temps de fabrication Collection Études et Recherches des LPC -série Ouvrages d'art -n° 41, 1161.

F. De-larrard, B. Cazacliu, D. Chopin, and E. Chateau, Production of SCC, 3rd International Symposium on Self Compacting Concrete, pp.17-20, 2003.

E. P. Koehler and D. W. Fowler, Summary of Concrete Workability, Test Methods ICAR Report International Center for Aggregates Research, vol.1051, 2003.

R. J. Flatt, Towards a Prediction of Superplasticized Concrete Rheology, Materials and Structures / Materiaux et Constructions, pp.289-300, 2004.

C. Ferraris and L. Brower, Comparison of Concrete Rheometers: International Tests at LCPC, 2000.
DOI : 10.6028/NIST.IR.7154

C. Ferraris and L. Brower, Comparison of Concrete Rheometers: International Tests at MB, National Institute of Standards and Technology NISTIR, vol.7154, 2003.
DOI : 10.6028/NIST.IR.7154

L. E. Brower and C. F. Ferraris, Comparison of Concrete Rheometers, Concrete International, vol.25, issue.8, pp.41-47, 2003.

C. F. Ferraris and F. De-larrard, Testing and Modeling of Fresh Concrete Rheology, National Institute of Standards and Technology, vol.6094, 1998.

C. F. Ferraris and F. De-larrard, Modified Slump Test to Measure Rheological Parameters of Fresh Concrete, Cement, Concrete and Aggregates, vol.20, pp.241-247, 1998.

J. A. Daczko, A Proposal for Measuring Rheology of Production Concrete, Concrete International, vol.22, issue.5, pp.47-49, 2000.

S. Amziane, C. F. Ferraris, and E. P. Koehler, Measurement of Rheological Properties of Fresh Concrete Using a Mixing Truck, 2005.

E. P. Koehler, Development of a Portable Rheometer for Portland Cement Concrete, 2004.

E. P. Koehler, D. W. Fowler, C. F. Ferraris, and S. Amziane, A New Portable Rheometer for Fresh Self-Consolidatinng Concrete, Proc. of session ACI 2005

R. Helmuth, L. Hills, D. Whitting, and S. Bhattacharja, Abnormal Concrete Performance in the Presence of Admixtures Portland Cement Association #, 1995.

H. A. Barnes and Q. D. Nguyen, Rotating vane rheometry ??? a review, Journal of Non-Newtonian Fluid Mechanics, vol.98, issue.1, pp.1-14, 2001.
DOI : 10.1016/S0377-0257(01)00095-7

A. W. Saak, H. M. Jennings, and S. P. Shah, The influence of wall slip on yield stress and viscoelastic measurements of cement paste, Cement and Concrete Research, vol.31, issue.2, pp.205-212
DOI : 10.1016/S0008-8846(00)00440-3

S. Amziane and C. F. Ferraris, Monitoring of Setting Evolution of Cementitious Materials by Measurements of Rheological Properties and Hydraulic Pressure Variations, 2004.

W. R. Schowalter and G. Christensen, Toward a rationalization of the slump test for fresh concrete: Comparisons of calculations and experiments, Journal of Rheology, vol.42, issue.4, pp.865-870, 1998.
DOI : 10.1122/1.550905

D. Vié, M. Durot, and D. Poineau, Poussée du béton fluidifié, Annales du Bâtiment et des Travaux Publics, pp.19-30, 1998.

J. Assaad and K. H. Khayat, Variations of Lateral and Pore Water Pressure of Self- Consolidating Concrete at Early Age, ACI Materials Journal, vol.101, issue.4, pp.310-317, 2004.

J. Assaad, K. H. Khayat, and H. Mesbah, Variation of Formwork Pressure with Thixotropy of Self-Consolidating Concrete, ACI Materials Journal, V, vol.100, issue.1, 2003.
URL : https://hal.archives-ouvertes.fr/hal-00999786

Y. Vanhove, Contribution à l'étude du frottement d'un béton auto-plaçant contre une surfece métallique ? Application aux poussées contre les coffrages, 2001.

G. Ovarlez and N. Roussel, A physical model for the prediction of lateral stress exerted by self-compacting concrete on a formwork

J. Nasvik, Formwork for Self-Consolidating Concrete, Concrete Construction, 2004.

D. Fedroff and R. J. Frosch, Formwork for Self-Consolidating Concrete, Concrete International, vol.26, issue.10, pp.32-37, 2004.

P. Billberg, Form pressure generated by self-compacting concrete, rd International Symposium on Self-Compacting Concrete, pp.271-280, 2003.

A. Leemann and C. Hoffmann, Pressure of self compacting concrete on the formwork, rd International Symposium on Self-Compacting Concrete, pp.288-295, 2003.

C. A. Clear and T. A. Harison, Concrete pressure on formwork, CIRIA-report, vol.108, 1985.

N. J. Gardner, Pressure of concrete on formwork ? a review', American concrete institute, Title N°. 82-69, pp.744-753, 1985.

L. Nachbaur, L. , and R. L. Roy, Influence of formwork removal and concrete workability on cladding hue, pp.27-42, 2002.

P. N. Okoh, L. Ouldhammou, . Ph, and . Baudeau, The evolution of fresh concrete pressure on formwork walls, International Conference on Rheology of Fresh Cement and Concrete, pp.26-29, 1990.

S. Amziane, . Ph, and . Baudeau, Effects of aggregate concentration and size in fresh concrete pressure on formwork walls, Materials and Structures, vol.214, issue.117, pp.50-58, 2000.
DOI : 10.1007/BF02481696

N. Andriamanantsilavo, Comportement des Matériaux Cimentaires dans un Coffrage : expérimentation, modélisation et simulation de la pousée et du processus de maturation, 2003.

. Ph and . Baudeau, Contribution à l'étude du comportement rhéologique du béton contenu dans des parois coffrantes de grande hauteur avant prise du ciment, Thèse de doctorat, p.189, 1983.

J. C. Tchamba, Contribution à l'étude de la rhéologie des matériaux cimentaires, Thèse en cours de l

M. Barrioulet and C. Legrand, L'effet de masse des granulats dans l'??coulement du b??ton frais vibr??, Material and Structures, pp.117-196, 1987.
DOI : 10.1007/BF02472736

M. Barrioulet and C. Legrand, Mise en ??vidence exp??rimentale des interactions entre p??te interstitielle et granulats dans l?????coulement du b??ton frais vibr??, Materials and Structures, vol.272, issue.4, pp.112-273, 1986.
DOI : 10.1007/BF02472110

C. Hu, Rhéologie des bétons fluides Etude et recherches des laboratoires des Ponts et Chaussées, Série ouvrages d'art OA16, septembre, pp.6-202, 1995.

D. W. Hobbs, Influence of aggregate volume concentration upon the workability of concrete and some predictions from the viscosity-elasticity analogy, Magazine of Concrete Research, pp.191-202, 1976.

R. L. Hermite, Expérience et théorie sur la technologie du béton', Revue Béton 189, p.juillet ? août, 1979.

N. Andriamanantsilavo and S. Amziane, Maturation of fresh cement paste within 1- to 10-m-large formworks, Cement and Concrete Research, vol.34, issue.11, pp.2141-2152, 2004.
DOI : 10.1016/j.cemconres.2004.03.027

P. Lura, O. M. Jensen, and K. Van-breugel, Autogenous shrinkage in high-performance cement paste: An evaluation of basic mechanisms, Cement and Concrete Research, vol.33, issue.2, pp.223-232, 2003.
DOI : 10.1016/S0008-8846(02)00890-6

L. Josserand, Ressuage des bétons hydrauliques, Thèse de l'Ecole Nationale des Ponts et Chaussées, Octobre, 2002.

P. Mounanga, Etude expérimentale du comportement de pâtes de ciment au très jeune âge : hydratation, retraits, propriétés thermophysiques, 2003.

J. Assaad, K. H. Khayat, and H. Mesbah, Assessment of Thixotropy of Flowable and Self-Consolidating Concrete, ACI Materials Journal, vol.100, issue.2, 2003.
URL : https://hal.archives-ouvertes.fr/hal-00999783

J. Assaad, K. H. Khayat, and H. Mesbah, Variation of Formwork Pressure with Thixotropy of Self-Consolidating Concrete, ACI Materials Journal, vol.100, issue.1, 2003.
URL : https://hal.archives-ouvertes.fr/hal-00999786

F. Mckenna, Hardness of Plasters and Cements, and a Simple Chronographic Apparatus for Recording Set., Journal of Industrial & Engineering Chemistry, vol.4, issue.2, pp.110-114, 1912.
DOI : 10.1021/ie50038a009

P. Nf, Méthode d'essai des ciments ? Détermination du temps de prise et de la stabilité, 2003.

J. Carlsona, M. Nilssonb, E. Fern, !. Andezb, J. et al., An ultrasonic pulse-echo technique for monitoring the setting of CaSO4-based bone cement, Biomaterials, vol.24, issue.1, pp.24-71, 2003.
DOI : 10.1016/S0142-9612(02)00253-3

A. Boumiz, C. Vernet, and F. C. Tenoudji, Mechanical properties of cement pastes and mortars at early ages, Advanced Cement Based Materials, pp.94-106, 1996.
DOI : 10.1016/S1065-7355(96)90042-5

W. J. Mccarter and P. N. Curran, The Electrical Response Characteristics of Setting Cement Paste, Magazine of Concrete Research, p.42, 1984.

S. G. Boivin, Retrait au jeune âge du béton : Développement d'une méthod expérimentale et contribution à l'analyse physique du retrait endogène, Thèse de doctorat à l'Ecole Nationale des Ponts et Chaussées, p.251, 1999.

Z. Toutou, N. Roussel, and C. Lanos, The squeezing test: a tool to identify firm cement-based material's rheological behaviour and evaluate their extrusion ability, Cement and Concrete Research, vol.35, issue.10, pp.1891-1899, 2005.
DOI : 10.1016/j.cemconres.2004.09.007

N. Roussel, C. Lanos, and Y. Mélinge, Induced heterogeneity in saturated flowing granular media, Powder Technology, vol.138, issue.1, pp.68-72, 2003.
DOI : 10.1016/j.powtec.2003.08.047

W. R. Gardner, Calculation of capillary conductivity from pressure plate outflow data, pp.317-320, 1956.

M. Rey, Nouvelle méthode de mesure de l'hydratation des liants hydrauliques, 1950.

E. Fourdrin, C. Guigou, and J. Chappuis, Early age shrinkage of mortars : conception of a new device and detailed analysis of a typical experimental curve, 2000.

N. Amziane and . Andriamanantsilavo, Prediction of cement paste pore water pressure variations during setting period Advances in Cement Research, 2004.

G. Cailletaud and P. Pilvin, Inverse Problems in Engineering Mechanics, pp.79-86, 1994.

A. M. Neville, Propriétés des bétons, p.805, 1992.

O. J. Uzomaka, Some fundamental Engineering Properties of Plastic Concrete, 1969.

S. Amziane and C. F. Ferraris, Monitoring of Setting Evolution of Cementitious Materials by Measurements of Rheological Properties and Hydraulic Pressure Variations, 2005.

V. A. Hackley and C. F. Ferraris, The Use of Nomenclature in Dispersion Science and Technology" NIST Recommended Practice Guide, pp.960-963, 2001.

G. Schramm, A practical approach to rheology and rheometry, 1994.

D. Lootens, P. Hebraud, E. Lecolier, and H. Van-damne, Gelation, Shear-Thinning and Shear-Thickening in Cement Slurries, Oil and Gaz, pp.31-40, 2004.
DOI : 10.2516/ogst:2004004

C. Ancey and C. R. Coussot, Transition from frictional to viscous regime for granular suspensions, C.R. Acad. Sci. Paris, t, vol.327, pp.515-522, 1999.

H. A. Janssen, Tests in grain pressure silos, Z. Vereins Deutsch Ing, vol.29, pp.1045-1895

G. Ovarlez, C. Fond, and E. Clément, Overshoot effect in the Janssen granular column: A crucial test for granular mechanics, Physical Review E, vol.67, issue.6, p.60302
DOI : 10.1103/PhysRevE.67.060302
URL : https://hal.archives-ouvertes.fr/hal-00195229

G. Ovarlez and E. Clément, Elastic medium confined in a column versus the Janssen experiment, The European Physical Journal E, vol.89, issue.4
DOI : 10.1140/epje/i2004-10098-8
URL : https://hal.archives-ouvertes.fr/hal-00138271

G. Ovarlez and N. Roussel, A physical model for the prediction of the lateral stress exerted by SCC on a formwork, 2005.

S. Mansoutre, Des suspensions concentrées aux milieux granulaires lubrifiés, études des pâtes de silicate tricalcique, Thèse de Doctorat à l'Université d'Orléans, 2000.

F. Rosquoët, A. Alexis, A. Khelidj, and A. Phelipot, Experimental study of cement grout, Cement and Concrete Research, vol.33, issue.5, pp.729-732, 2003.
DOI : 10.1016/S0008-8846(02)01036-0

G. Constantinides and F. Ulm, The effect of two types of C-S-H on the elasticity of cement-based materials: Results from nanoindentation and micromechanical modeling, Cement and Concrete Research, pp.67-80, 2004.

S. Jarny, N. Roussel, S. Rodts, F. Bertrand, R. L. Roy et al., Rheological behavior of cement pastes from MRI velocimetry, Cement and Concrete Research, 2005.