I. A. Altun and N. Ölmez, Comparative investigations of microstructure and grindability of cement clinker, Ore dressing, p.6, 2001.

B. Beke, Difficultés et limites du broyage fin par voie sèche, pp.114-116, 1973.

B. Beke, Résultats de recherches concernant le broyage fin, pp.121-133, 1974.

P. Blazy and E. Jdid, Fragmentation-Technologie, Techniques de l'ingénieur, Dossier A, p.5060, 1991.

G. M. Carter, J. L. Henshall, and R. J. Wakeman, Influence of surfactants on the mechanicalproperties and comminution of wet-milled calcite, Powder technology, pp.11-14, 1991.

H. Dombrowe, B. Hoffman, and W. Scheibe, Mode of action and possibilities for use of grinding aids, pp.571-580, 1982.

H. Dombrowe and W. Scheibe, Application of grinding aids in closed circuit cement works mills, pp.81-86, 1983.

H. El-shall, Physico-chemical aspects of grinding: a review of use of additives, Powder Technology, vol.38, issue.3, pp.275-293, 1984.
DOI : 10.1016/0032-5910(84)85009-3

K. Erdogdu, M. Tokyay, and P. Türker, Comparison of intergrinding and separate grinding for the production of natural pozzolan and GBFS-incorporated blended cements, Cement and Concrete Research, vol.29, issue.5, p.5, 1999.
DOI : 10.1016/S0008-8846(99)00039-3

A. A. Griffith, The Phenomena of Rupture and Flow in Solids, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.221, issue.582-593, pp.163-198, 1921.
DOI : 10.1098/rsta.1921.0006

C. Hosten and C. Avsar, Grindability of mixtures of cement clinker and trass, Cement and Concrete Research, pp.1519-1524, 1998.

F. Ikazaki, K. Kamiya, K. Uchida, A. Kawai, S. Yoda et al., Chemically assisted dry comminution of an inorganic powder, Advanced powder technology, pp.111-120, 1996.

A. Jankovic, W. Valery, and E. Davis, Cement grinding optimisation, Minerals engineering, V17, pp.1075-1081, 2004.

K. Kendall, Complexities of Compression Failure, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.361, issue.1705, pp.245-263, 1978.
DOI : 10.1098/rspa.1978.0101

R. R. Klimpel, The selection of wet grinding chemical additives based on slurry rheology control, Powder Technology, vol.105, issue.1-3, pp.430-435, 1999.
DOI : 10.1016/S0032-5910(99)00169-2

M. J. Knoflicek and W. C. Wentzel, Experiences with clinker grinding in roller mills, IEEE Transactions on Industry Applications, vol.2, pp.413-418, 1995.

G. Marchal, Industrial experience with clinker grinding in the HOROMILL/sup R/, 1997 IEEE/PCA Cement Industry Technical Conference. XXXIX Conference Record (Cat. No.97CH36076), pp.195-211, 1997.
DOI : 10.1109/CITCON.1997.599299

S. K. Moothedath and S. C. Ahluwalia, Mechanism of action of grinding aids in comminution, Powder technology, p.3, 1992.

P. B. Nair and R. Paramasivam, Effect of grinding aids on the time-flow characteristics of the ground product from a batch ball mill, Powder technology, V101, pp.31-42, 1999.

L. Opoczky, Milling of hard materials in ball mills, pp.390-391, 1979.

L. Opoczky, Possibilities for use of wetting agents in the grinding technique, Tudomanyos Koezlemenyek, p.77, 1983.

L. Opoczky, Grinding technical questions of producing composite cement, International Journal of Mineral Processing, vol.44, issue.45, pp.44-45, 1996.
DOI : 10.1016/0301-7516(95)00046-1

L. Pliskin, La fabrication du ciment, Société des Ciments Français, pp.97-103, 1993.

R. B. Rao and E. Forssberg, Effect of polymers as dispersing agents on dry grinding of dolomite, Metals materials and processes, pp.49-56, 1997.

P. A. Rehbinder and E. D. Shchukin, Surface phenomena in solids during deformation and fracture process, Progress in Surface Science, pp.97-104, 1972.

H. Rosemann and H. G. Ellerbrock, Grinding technology for cement production ? Development, situation and outlook, p.51, 1998.

P. Rosin and E. Rammler, The Laws Governing the Fineness of Powdered Coal, Journal of the Institute of Fuel, vol.7, pp.29-36, 1933.

S. Sohoni, R. Sridhar, and G. Mandal, The effect of grinding aids on the fine grinding of limestone, quartz and Portland-cement clinker, Powder technology, pp.277-286, 1991.

I. Teoreanu and G. Guslicov, Mechanisms and effects of additives from the dihydroxycompound class on Portland cement grinding, Cement and Concrete Research, pp.9-15, 1999.

M. Tokyay, Effect of chemical composition of clinker on grinding energy requirement, Cement and Concrete Research, pp.531-535, 1999.

G. Unland, K. Meltke, O. Popov, and F. Silbermann, Assessment of the grindability of cement clinker, p.1, 2003.

M. Venuat, Les agents de mouture et les économies d'énergie, pp.285-289, 1983.

A. R. Westwood, J. S. Ahearn, and J. J. Mills, Developments in the theory and application of chemomechanical effects, Colloids and Surfaces, pp.1-35, 1981.

B. Becke and L. Opoczky, Broyage fin de clinkers de ciment avec des agents de mouture, pp.67-75, 1970.

J. S. Bhatia, The use of grinding aids in ball mill grinding, pp.413-414, 1979.

T. Furukawa, A. Anan, and K. Yamazaki, Quelques observations sur l'utilisation des adjuvants de broyage dans un système de broyage de ciment en circuit fermé, CAJ-Review of the 25th general meeting, technical session, pp.54-55, 1971.

A. Glasnovic and M. Hraste, The grinding equation in the investigation of the coarse dispersing system of cement, Cement and Concrete Research, vol.12, issue.4, pp.415-424, 1982.
DOI : 10.1016/0008-8846(82)90056-4

A. N. Grachjan and L. N. Dovyborova, Influence des substances tensio-actives sur l'intensification du broyage et sur les propriétés des ciments Portland, pp.405-407, 1971.

A. N. Grachjan and T. I. Tavlinova, Intensification du processus de broyage du clinker de ciment Portland par des alcools, Izvestja vysshykh uchebnykh zavedenij, pp.1876-1878, 1973.

A. N. Grachjan and L. N. Dovyborova, Influence des substances tensioactives sur l'intensification du broyage et sur les propriétés des ciments Portland, pp.405-407, 1971.

H. Mio, J. Kano, F. Saito, and K. Kaneko, Effects of rotational direction and rotation-torevolution speed ratio in planetary ball milling, Materials science and engineering A- Structural Materials Properties Microstructure and Processing, A332, pp.75-80, 2002.

I. Teoreanu and G. Guslicov, Mechanisms and effects of additives from the dihydroxycompound class on Portland cement grinding, Cement and Concrete Research, pp.9-15, 1999.

R. Opoczky and L. , Grinding technical questions of producing composite cement, International Journal of Mineral Processing, vol.44, issue.45, pp.44-45, 1996.
DOI : 10.1016/0301-7516(95)00046-1

H. Shen and E. Forssberg, An overview of recovery of metals from slags, Waste management, N23, pp.933-949, 2003.

S. Sohoni, R. Sridhar, and G. Mandal, The effect of grinding aids on the fine grinding of limestone, quartz and Portland-cement clinker, Powder technology, pp.277-286, 1991.

P. Somasundaran and D. W. Fuerstenau, Perferential energy consumption in tumbling mills, Transactions AIME, vol.226, pp.132-134, 1963.

M. Abdellaoui and E. Gaffet, The physics of mechanical alloying in a planetary ball mill: Mathematical treatment, Acta Metallurgica et Materialia, vol.43, issue.3, pp.1087-1098, 1995.
DOI : 10.1016/0956-7151(95)92625-7

P. Cassat, Détermination des mécanismes d'action de deux agents de mouture du ciment par désorption laser couplée à la spectrométrie de masse à transformée de Fourier, 1998.

M. P. Dallimore and P. G. Mccormick, Distinct element modelling of mechanical alloying in a planetary ball mill, Synthesis and Properties of Mechanically Alloyed and Nanocrystalline Materials, Pts 1 and 2 ? Ismanam-96, Materials Science Forum, vol.235, pp.5-13, 1997.

S. Emiroglu, N. Bârsan, U. Weimar, and V. Hoffmann, In situ diffuse reflectance infrared spectroscopy study of CO adsorption on SnO 2 , Thin Solid Films, pp.176-185, 2001.

A. Vidyadhar, K. Hanumantha-rao, I. V. Chernyshova, K. S. Pradip, and . Forssberg, Mechanisms of Amine???Quartz Interaction in the Absence and Presence of Alcohols Studied by Spectroscopic Methods, Journal of Colloid and Interface Science, vol.256, issue.1, pp.256-59, 2002.
DOI : 10.1006/jcis.2001.7895