C. Du-bois-par-mesure-du-module-de and Y. , 178 V.2.b. Méthode et protocole expérimental, Mesure du module de Young par vibrations transversales ................... 179

É. Protocole, 181 V.2.b.v. Correction d'humidité, 184 V.2.c.i. Suivi du module de Young en fonction des paramètres de traitement, p.184

M. Du, 187 V.2.d. Conclusion, p.188

V. 3. Caracterisation-de-l-'angle, . Des, and .. Par-drx-et-rigidite, 188 V.3.a. Introduction, Protocole et échantillons

N. F. Barber and B. A. Meylan, The Anisotropic Shrinkage of Wood. A Theoretical Model, Holzforschung, vol.18, issue.5, pp.146-156, 1964.
DOI : 10.1515/hfsg.1964.18.5.146

N. F. Barber, A Theoretical Model of Shrinking Wood, Holzforschung, vol.22, issue.4, pp.97-103, 1968.
DOI : 10.1515/hfsg.1968.22.4.97

J. R. Barnett and V. A. Bonham, Cellulose microfibril angle in the cell wall of wood fibres, Biological Reviews, vol.44, issue.7, pp.461-472, 2004.
DOI : 10.1105/tpc.005801

E. Baysal, S. K. Ozaki, and M. K. Yalinkilic, Dimensional stabilization of wood treated with furfuryl alcohol catalysed by borates, Wood Science and Technology, vol.38, pp.405-415, 2004.
DOI : 10.1007/s00226-004-0248-2

P. Bekhta and P. Niemz, Effect of High Temperature on the Change in Color, Dimensional Stability and Mechanical Properties of Spruce Wood, Holzforschung, vol.57, issue.5, pp.539-546, 2003.
DOI : 10.1515/HF.2003.080

T. R. Bhuiyan, N. Hirai, and N. Sobue, Effect of intermittent heat treatment on crystallinity in wood cellulose, Journal of Wood Science, vol.16, issue.5, pp.336-341, 2001.
DOI : 10.1007/BF00766782

J. L. Bianco, La forêt : une chance pour la France, 1998.

J. Bodig and B. Jayne, A. 1982 Mechanics of wood and wood composites. Editions Van Nostrand Reinhold Company

P. Bordet, Analyse des diagrammes de diffraction de poudres par les méthodes de profil total Rapport de formation permanente sur la diffraction des matériaux polycristallins de l, 2004.

J. Bourgois, G. Janin, and R. Guyonnet, La Mesure de Couleur: Une M??thode d???Etude et d???Optimisation des Transformations Chimiques du Bois Thermolys??, Holzforschung, vol.45, issue.5, pp.377-382, 1991.
DOI : 10.1515/hfsg.1991.45.5.377

P. A. Bourque, Planète Terre Page Internet de l'université de Laval (Canada), 2005.

P. Boustingorry, Elaboration d'un matériau composite à matrice gypse et renfort bois fragmenté ? amélioration de la résistance au vissage de produits préfabriqués en gypse, Thèse de l'Ecole Nationale Supérieure des Mines de Saint-Étienneet de l'Institut National Polytechnique de Grenoble, 2002.

J. Boutelje, The Relationship of Structure to Transverse Anisotropy in Wood with Reference to Shrinkage and Elasticity, Holzforschung, vol.16, issue.2, pp.33-46, 1962.
DOI : 10.1515/hfsg.1962.16.2.33

J. Boutelje, On shrinkage and change in microscopic void volume during drying as calculated from measurements on microtome cross sections of Swedish Pine (pinus sylvetris L.). Swensk papperstidning, pp.209-215, 1962.

J. D. Boyd, Interpretation of X-ray diffractograms of wood for assesments of microfibril angles in fibre cell walls, Wood Science and Technology, vol.11, pp.93-114, 1977.

L. Brancheriau, Expertise mécanique des sciages par analyse des vibrations dans le domaine accoustique, Thèse de l, 2002.

L. Brancheriau and H. Baillères, Natural vibration analysis of clear wooden beams: a theoretical review, Wood Science and Technology, vol.36, issue.4, pp.347-365, 2002.
DOI : 10.1007/s00226-002-0143-7

Y. Bréchet, La sélection des matériaux et des procédés : méthodes rationnelles d'aide au choix, Lettre des Sciences Chimiques, vol.65, issue.3, pp.30-33, 1998.

A. Bruyas and J. Fourastier, Les marchés des bois d'industrie et du bois énergie en France et à l'export. Le bois inter-national, pp.16-17, 2005.

A. Bruyas and J. Fourastier, la forêt et les productions forestières. Le bois inter-national, pp.23-24, 2003.

I. D. Cave, Theory of X-ray measurement of microfibril angle in wood, Forest Product Journal, vol.6, issue.10, pp.37-43, 1966.

I. D. Cave, The anisotropic elasticity of the plant cell wall, Wood Science and Technology, vol.19, issue.4, pp.268-278, 1968.
DOI : 10.1007/BF00350273

I. D. Cave, Swelling of a fibre reinforced composite in which the matrix is water reactive, Wood Science and Technology, vol.1, issue.2, pp.157-161, 1972.
DOI : 10.1007/BF00350828

I. D. Cave, A theory of the shrinkage of wood, Wood Science and Technology, vol.1, issue.4, pp.284-292
DOI : 10.1007/BF00357050

O. Faix, I. Fortmann, J. Bremer, and D. Meyer, Thermal degradation product of wood-Gas chromatographic separation and mass spectrometric characterization of polysaccharides derived products. Holz als Roh-und Werkstoff, pp.213-219, 1991.

J. Färber, H. C. Lichtenegger, A. Reiterer, S. Stanzl-tschegg, and P. Fratz, Cellulose microfibril angle in a spruce branch and mechanical implications, Journal of Materials Science, vol.36, issue.21, pp.5087-5092, 2001.
DOI : 10.1023/A:1012465005607

M. Fujita and H. Harada, Ultrastructure and formation of wood cell wall. Wood and Cellulosic Chemistry p.3-57, Editions Marcel Dekker INC, 1991.

A. Govin, Aspects physico-chimiques de l'interaction bois ?ciment : Modification de l'hydratation du ciment par le bois, Thèse de l'Ecole Nationale Supérieure des Mines de Saint Etienne et de l, 2004.
URL : https://hal.archives-ouvertes.fr/tel-00012091

I. F. Green and T. L. Highley, Mechanism of brown-rot decay: Paradigm or paradox, International Biodeterioration & Biodegradation, vol.39, issue.2-3, pp.113-124, 1997.
DOI : 10.1016/S0964-8305(96)00063-7

D. Grenier, H. Baillères, J. Méot, P. Langbour, and J. Lanvin, A study of water loss and oil absorption during oleothermic treatment of wood, Actes du 1 st European Conference on Wood Modification, pp.23-32, 2003.

J. Gril, Une modélisation du comportement hygro-rhéologique du bois à partir de sa microstructure, Thèse de l, 1988.

B. Guilhot, Décomposition des solides Cours de DEA en génie des procédés de l'Ecole Nationale, 2001.

R. F. Hearmon, The influence of shear and rotatory inertia on the free flexural vibration of wooden beams, British Journal of Applied Physics, vol.9, issue.10, pp.381-388, 1958.
DOI : 10.1088/0508-3443/9/10/301

W. E. Hillis, High temperature and chemical effects on wood stability-Part 1: General considerations. Wood Science and technology, pp.281-293, 1984.

R. Hori, M. Müller, U. Watanabe, H. C. Lichtenegger, P. Fratzl et al., The importance of seasonal differences in the cellulose microfibril angle in softwood in determining accoustic properties, Journal of Materials Science, vol.37, issue.20, pp.4279-4284, 2002.
DOI : 10.1023/A:1020688132345

R. J. Hoyle, Backgroung to stress grading machine, Forest Product Journal, vol.18, issue.4, pp.87-97, 1968.

C. L. Huang, H. Lindström, R. Nakada, and J. Ralston, Cell wall structure and wood properties determined by acoustics ? a selective review. Holz als Roh-und Werkstoff, pp.321-335, 2003.

H. F. Jang, Measurement of fibril angle in wood fibres with polarization confocal microscopy, Journal of Pulp and Paper Science, vol.24, issue.7, pp.224-230, 1998.

J. P. Joseleau, Acquisition de connaissances fondamentales sur les mécanismes de transformation des parois cellulaires du bois lors du traitements thermique de rétification, 2000.

H. Kabeya, Effect of grinding on bound water in cellulosic materials, Mokuzai Gakkaishi, vol.39, issue.11, pp.1291-1297, 1993.

. Kojimay and H. Yamamoto, Properties of the cell wall constituents in relation to the longitudinal elasticity of wood, Wood Science and Technology, vol.37, issue.5, pp.427-434, 2004.
DOI : 10.1007/s00226-003-0177-5

F. F. Kollman and W. A. Côté, Principle of wood science and technology ? volume: 1 solid wood, 1984.

S. Koponen, T. Toratti, and P. Kanerva, 1989 Modelling longitudinal elastic and shrinkage properties of wood. Wood Science and Technology, pp.55-63

Y. Kubojima, T. Okano, and M. Ohta, Vibrational properties of Sitka spruce heat-treated in nitrogen gas, Journal of Wood Science, vol.42, issue.1, pp.73-77, 1998.
DOI : 10.1007/BF00521878

Y. Kubojima, T. Okano, and M. Ohta, Vibrational properties of heat-treated green wood, Journal of Wood Science, vol.11, issue.1, pp.63-67
DOI : 10.1007/BF00779555

N. Labbé, D. Jéso, B. Lartigue, J. C. Daudé, G. Pétraud et al., Moisture content and extractive materials in maritime pine wood by low field H 1 MNR, Holzforschung, vol.56, pp.25-31, 2002.

L. Nizerhy, D. Chevalier, Y. Vinh, and T. , Vibration de flexion des poutres anisotropes en matériau composite ? application à la détermination des modules de Young, Sciences et Techniques de l'Armement, pp.291-324, 1981.

J. M. Long, A. B. Conn, W. J. Batchelor, and R. Evans, Comparison of methods to measure fibril angle in wood fiber, Appita Journal, vol.53, issue.3, pp.206-209, 2000.

C. Maloney and H. Paulapuro, Hydration and swelling of pulp fibers measured with differential scanning calorimetry. Nordic Pulp and Paper Research Journal, pp.31-36, 1998.

G. G. Marra, R. F. Pellerin, and W. L. Galligan, Nondestructive determination of wood strength and elasticity by vibration. Holz als Roh-und Werstoff, pp.460-466, 1966.

H. Militz and C. Hill, Wood Modification: Processes, properties and commercialisation, Proceedings of the Second European Conference on Wood Modification, 2005.

B. Montiès, Les lignines. Les polymères végétaux p.122-155, Editions B. Montiès BORDAS, 1980.

K. Nakamura, T. Hatakeyama, and H. Hatakeyama, Studies on Bound Water of Cellulose by differential scanning calorometry, Textile Research Journal, vol.72, issue.9, pp.607-613, 1981.

T. Nakao, T. Okano, and H. Nishimura, Effect of heat treatment on cellulose cristallites of wood, Journal of polymer science, vol.23, pp.647-649, 1985.

R. A. Nelson, The determination of moisture transitions in cellulosic materials using differential scanning calorimetry, Journal of Applied Polymer Science, vol.21, issue.3, pp.645-654
DOI : 10.1002/app.1977.070210306

E. Obataya, F. Tanaka, M. Norimoto, and B. Tomita, Hygroscopicity of Heat-treated Wood I -Effects of after treatments on the hygroscopicity of heat-treated wood, Mokuzai Gakkaishi, vol.46, issue.2, pp.77-87, 2000.

E. Obataya, T. Ono, and M. Norimoto, Vibrationnal properties of wood along the grain, Journal of Materials Science, vol.35, issue.12, pp.2993-3001, 2000.
DOI : 10.1023/A:1004782827844

E. Obataya, M. Sugiyama, and B. Tomita, Dimensional stability of wood acetylated with acetic anhydride solution of glucose pentaacetate, Journal of Wood Science, vol.47, issue.4, pp.315-319, 2002.
DOI : 10.1007/BF00831353

E. Obataya and B. Tomita, Hygroscopicity of Heat-treated Wood II -Reversible reductions in the hygroscopicity of wood due to heating, Mokuzai Gakkaishi, vol.48, issue.4, pp.288-295, 2002.

E. Obataya, T. Higashihara, and B. Tomita, Hygroscopicity of heat treated wood III ? Effect of steaming on the hygroscopicity of Wood En anglais sur http, Different effect of dry heating and steaming, pp.348-355, 2002.

K. Ohmae, K. Minato, and N. Norimoto, The Analysis of Dimensional Changes Due to Chemical Treatments and Water Soaking for Hinoki (Chamaecyparis obtusa) Wood, Holzforschung, vol.56, issue.1, pp.98-102, 2002.
DOI : 10.1515/HF.2002.016

T. Paakari and R. Serimaa, 1984 A study of the structure of wood cells by X-ray diffraction. Wood Science and Technology, pp.79-85

S. Pang, Predicting anisotropic shrinkage of softwood Part 1 : theories. Wood Science and Technology, pp.75-91, 2002.

R. F. Pellerin, 1964 A vibrational approach to non-destructive testing of structural lumber, Forest Product Journal, vol.15, issue.9, pp.93-101

G. Pluvinage, 1992 La rupture du bois et de ses composites, Editions Cepadues-Editions

A. D. Pouwels, A. Tom, G. B. Eijkel, and J. J. Boon, Characterisation of beech wood and its holocellulose and xylan fractions by pyrolysis-gas chromatography-mass spectrometry, Journal of Analytical and Applied Pyrolysis, vol.11, pp.417-436, 1987.
DOI : 10.1016/0165-2370(87)85045-3

A. Reiterer, H. F. Jakob, S. E. Stantzl-tschegg, and P. Fratzl, Spiral angle of elementary cellulose fibrils in cell walls of Picea Abies determined by small angle X-ray scattering. Wood Science and Technology, pp.335-345, 1998.

A. Reiterer, H. Lichtenegger, S. Tschegg, and P. Fratz, Experimental evidence for a mechanical function of the cellulose microfibril angle in wood cell walls, Philosophical Magazine A, vol.4, issue.9, pp.2173-2184, 1999.
DOI : 10.1007/BF00702790

V. Repellin, Le contrôle du traitement de rétification du bois ? Equivalence des paramètres temps et température, 2002.

V. Repellin and R. Guyonnet, Evaluation of heat treated beech by non destructive testing, 2003.
URL : https://hal.archives-ouvertes.fr/hal-00123723

V. Repellin and R. Guyonnet, Evaluation of heat-treated wood swelling by differential scanning calorimetry in relation to chemical composition, Holzforschung, vol.59, issue.1, pp.28-34, 2005.
DOI : 10.1515/HF.2005.005

M. Roquebert, Introduction à la biologie des moisissures, Biodéterioration des Matériaux Editions EDP Sciences, pp.59-67, 1998.

A. M. Scallan, The Structure of the Cell Wall of Wood ; a consequence of anisotropic inter microfibrillar bonding, Journal of Wood Science, vol.6, issue.3, pp.266-271, 1974.

Y. Sekigushi and F. Shafizadeh, The effect of inorganic additives on the formation, composition, and combustion of cellulosic char, Journal of Applied Polymer Science, vol.29, issue.4, pp.1267-1286, 1984.
DOI : 10.1002/app.1984.070290421

R. Serimaa, M. Blomberg, S. Perkkiö, V. Etelaniemi, and T. Paakari, The cell wall structure of Jupiner and some foliage trees by X-ray diffraction, 1986.

F. Shafizadeh, Industrial pyrolysis of cellulosic materials Applied Polymer Symposium, pp.153-174, 1975.

F. Shafizadeh, The chemistry of pyrolysis and combustion. The chemistry of solid wood, pp.489-507, 1984.

K. Shimizu, F. Teratani, and K. Miyazaki, Effect of thermal treatment on wood hemicelluloses IV : mechanism in early stage of xylan pyrolysis, Journal of Japanese Wood Research Society, vol.17, issue.4, pp.154-159, 1971.

K. Shimizu, F. Teratani, and K. Miyazaki, Effect of thermal treatment on wood hemicelluloses V : pyrolysis gas chromatography and chemical changes of xylan, Journal of Japanese Wood Research Society, vol.17, issue.10, pp.456-463, 1971.

L. A. Simpson and A. F. Barton, Determination of the fibre saturation point in whole wood using DSC. Wood Science and technology, pp.301-308, 1991.

V. L. Singleton and J. A. Rossi, Colorimetry of total phenolics with phosphomolybdicphosphotungstic acid reagent, American Journal of Enology and Viticulture, vol.16, pp.144-158, 1965.

N. Sobue, N. Hirai, and I. Asano, Studies on structure of wood by X-ray II. Estimation of the orientations of micells in cell wall, Journal of Japanese Wood Research Society, vol.17, issue.2, pp.44-55, 1971.

B. Sundqvist and T. Morén, The influence of wood polymer and extractives on wood colour induced by hydrothermal treatment. Holz als Roh-und Werkstoff, pp.375-376, 2002.

M. C. Timar, K. Maher, M. Irle, and M. D. Mihai, Thermal forming of chemically modified wood to make high-performance plastic-like wood composites, Holzforschung, vol.58, issue.5, pp.519-528, 2004.
DOI : 10.1515/HF.2004.079

B. F. Tjeerdsma, M. Boonstra, A. Pizzi, P. Tekely, and H. Militz, Characterization of thermally modified wood: molecular reasons for wood performance improvement. Holz als Roh-und Werkstoff, pp.149-153, 1998.

Y. Trennard, Comparaison et Interpretation de Courbes Obtenues par Porosim??trie au Mercure sur Diverses Essences de Bois, Holzforschung, vol.34, issue.4, pp.139-146, 1980.
DOI : 10.1515/hfsg.1980.34.4.139

J. Van-acker, M. Steven, J. Carey, R. Sierra-alvarez, H. Militz et al., Biological durability of wood in relation to end-use. Part 1: Toward a European standard for laboratory testing of the biological durability of wood, pp.35-45, 2003.

J. V. Vincent, From cellulose to cell, Journal of Experimental Biology, vol.202, issue.23, pp.3263-3268, 1999.

H. H. Wang, J. G. Drummond, S. M. Reath, K. Hunt, and P. A. Watson, An improved fibril angle measurement method for wood fibers. Wood Science and Technology, pp.493-503, 2001.

J. Weiland, Etude physico-chimique du traitement thermique du bois Optimisation de paramètres du procédé de rétification®, Thèse de l'Ecole Nationale Supérieure des Mines de Saint Etienne et de l, 2000.

J. J. Weiland and R. Guyonnet, Study of chemical modifications and fungi degradation of thermally modified wood using DRIFT spectroscopy. Holz als Roh-und Werkstoff, pp.216-220, 2003.
URL : https://hal.archives-ouvertes.fr/emse-00449295

J. E. Winandy and J. J. Morrell, Relationship between incipient decay, strength, and chemical composition of Douglas-fir heartwood, Wood and Fiber Science, vol.25, pp.278-288, 1993.

P. Xu and H. Liu, 2004 Models of microfibril elastic modulus parallel to the cell axis. Wood Science and Technology, pp.363-374

H. Yamamoto, A model of the anisotropic swelling and shrinking process of wood. Part 1. Generalization of Barber's wood fiber model, Wood Science and Technology, vol.33, issue.4, pp.311-325
DOI : 10.1007/s002260050118

H. Yamamoto, F. Sassus, M. Ninomiya, and J. Gril, A model of anisotropic swelling and shrinking process of wood, Wood Science and Technology, vol.35, issue.1-2, pp.167-181
DOI : 10.1007/s002260000074

H. Yamamoto and Y. Kojima, Properties of cell wall constituents in relation to longitudinal elasticity of wood, Wood Science and Technology, vol.36, issue.1, pp.55-74, 2002.
DOI : 10.1007/s00226-001-0128-y

L. Yan and Q. Zhu, 1999 Direct observation of the main cell wall components of straw by AFM. Nordic Pulp and Paper Research Journal, pp.129-139

Y. L. Evans and R. , Prediction of MOE of eucalypt wood from microfibril angle and density. Holz als Roh-und Werkstoff, pp.49-52, 2003.

R. A. Zabel and J. J. Morrell, Wood microbiology ? Decay and its prevention. Editions Academic press, 1992.

M. Zanetti, A. Pizzi, and C. Simon, De nouvelles colles à bois d'origine végétale. Techniques de l'ingénieur, pp.1-6, 2003.