R. Pulse-base-pulse and .. T1-t0-fig, 3.2.3 ? Chronogramme des signaux pulsés pour la mesure en mode pulsé Table des figures 1.2.1 Schéma et principe d'une antenne réseaù a une dimension etàetà phase linéaire

A. Quatrì-eme, Partie passive distribuée en vue de dessus -(b) en vue en coupe -(c) Eléments localisés (Modèles circuit des bondings), p.74

S. Paramètres and . De-la-puce-nue, mesure sous pointes) du bo??tierbo??tier sans capot (Résultats de mesure et de simulationàsimulationà l'aide de la compression) 103

.. 30-ghz, Gain simulé du module double LNA jusqu, p.132

.. Deux-fils-au-dessus-d-'un-plan-de-masse, 205 3.1.1 Synoptique du banc de mesure en petit signal, p.209

B. Bibliographie and ]. I. Leroy, Analyse des performances instrumentales d'un radaràradarà antenne active -developpement d'un outil de simulation, Thèse de doctorat, 1993.

J. Grzyb, D. Cottet, and G. Tröster, Integrated passive elements on low cost MCM-D substrates, International Conference on High-Density Interconnect and Systems Packaging, pp.256-260, 2001.

S. F. Al-sarawi, D. Abbott, and P. Franzon, A review of 3-D packaging technology, IEEE Transactions on Components, Packaging, and Manufacturing Technology: Part B, vol.21, issue.1, pp.2-14, 1998.
DOI : 10.1109/96.659500

K. Phan and H. Morkner, A high performance yet easy to use low noise amplifier in SMT package for 6 to 20 GHz low cost application, 12th GAAS Symposium, pp.603-606, 2004.

A. Bessemoulin, M. Parisot, P. Quentin, C. Saboureau, M. V. Heijningen et al., A 1-Watt Ku-band power amplifier MMIC using cost-effective organic SMD package, 12th GAAS Symposium, pp.587-590, 2004.

M. V. Heijningen and J. Priday, Novel organic SMD package for high-power millimeter wave MMICs, 12th GAAS Symposium, pp.595-598, 2004.

J. Galì-ere, J. L. Valard, and E. Estebe, Millimeter-wave MMIC packaging compatible with surface-mount technology (SMT), " 12th GAAS Symposium, pp.591-594, 2004.

T. Gleditsch, H. Krisitansen, and D. Ausen, The nordic guide line packaging

C. Saboureau, AnalysesélectromagnétiquesAnalysesélectromagnétiques et méthodologies de conception associés, dédiéesdédiéesà l'optimisation de composants et modules millimétriques, Thèse de Doctorat, 2004.

A. Noll, An MCM BGA platform for commercial systems applications, Microwave Journal, pp.84-90, 1997.

F. Ali and A. Gupta, Artech house, HEMTs et HBTs : Devices, Fabrication, and Circuits

K. Puttlitz and P. A. Totta, Aera interconnexion handbook, 2001.

P. Thompson, Chip-scale packaging, IEEE Spectrum, vol.34, issue.8, pp.233-236, 1997.
DOI : 10.1109/6.609473

R. Valois, D. Baillargeat, S. Verdeyme, M. Lahti, and T. Jaakola, High performances of shielded LTCC vertical transitions from DC up to 50 GHz, 34th European Microwave Conference, pp.537-540, 2004.
DOI : 10.1109/TMTT.2005.848832

K. Ikeda, K. Yoshida, T. Shirasaki, and C. Makihara, Development of CSP for microwave/millimeterwave applications, 1999.

S. Morioka and Y. Sawa, Surface mount package for high frequency band, 1999 Asia Pacific Microwave Conference. APMC'99. Microwaves Enter the 21st Century. Conference Proceedings (Cat. No.99TH8473), pp.958-951, 1999.
DOI : 10.1109/APMC.1999.833755

D. Staiculescu, A. Pahm, J. Laskar, S. Consolazio, and S. Moghe, Analysis and performance of BGA interconnects for RF packaging, 1998 IEEE Radio Frequency Integrated Circuits (RFIC) Symposium. Digest of Papers (Cat. No.98CH36182), 1998.
DOI : 10.1109/RFIC.1998.682064

M. P. Panicker, D. Douret, M. S. Hyslop, and N. L. Greenman, Ball grid arrays : A DC to 31.5 GHz low cost packaging solution for microwave and mm- Wave MMICs, Microwave Journal, pp.158-168, 1998.

R. I. Ito, W. Jackson, and T. Hongsmatip, Modeling of interconnections and isolation within a multilayered ball grid array package, IEEE Transactions on Microwave Theory and Techniques, vol.47, issue.9, pp.1819-1825, 1999.
DOI : 10.1109/22.788517

T. Tischler, M. Rudolph, A. Kilk, and W. Heinrich, Via arrays for grounding in multilayer packaging - frequency limits and design rules, IEEE MTT-S International Microwave Symposium Digest, 2003, pp.1147-1150, 2003.
DOI : 10.1109/MWSYM.2003.1212571

A. Sutono, N. G. Cafaro, J. Laskar, and M. M. Tentzeris, Experimental modeling , repeatability investigation and optimisation of microwave bond wire interconnects, IEEE Trans. on Advanced Packaging, pp.595-603, 2001.

T. Krems, W. Haydl, H. Massler, and J. Rüdiger, Millimeter-wave performance of chip interconnexions using wire bonding and flip-chip, IEEE MTT-S International Microwave Symposium Digest, pp.247-250, 1996.

H. Lee, Wideband characterization of a typical bonding wire for microwave and millimeter-wave integrated circuits, IEEE Trans. MTT, vol.43, pp.63-68, 1995.

F. Alimenti, P. Mezzanotte, L. Roselli, and R. Sorrentino, Multi-wire microstrip interconnections : a systematic analysis for the extraction of an equivalent circuit, IEEE MTT-S International Microwave Symposium Digest, pp.1929-1932, 1998.

Z. Feng, W. Zhang, B. Su, K. C. Gupta, and Y. C. Lee, RF and mechanical characterization of flip-chip interconnects in CPW circuits with underfill, IEEE Transactions on Microwave Theory and Techniques, vol.46, issue.12, pp.2269-2275, 1998.
DOI : 10.1109/22.739210

H. M. Ghouz and E. El-sharawy, An accurate equivalent circuit model of flip chip and via interconnects, IEEE Transactions on Microwave Theory and Techniques, vol.44, issue.12, pp.2543-2554, 1996.
DOI : 10.1109/22.554598

W. Heinrich, A. Jentzsch, and G. Baumann, Millimeter-wave characteristics of flip-chip interconnects for multichip modules, IEEE Transactions on Microwave Theory and Techniques, vol.46, issue.12, pp.2264-2268, 1998.
DOI : 10.1109/22.739208

D. Staiculescu, J. , and E. M. Tentzeris, Design rule development for microwave flip-chip applications, IEEE Trans. MTT, pp.1476-1480, 2000.
DOI : 10.1109/22.868997

A. Bessemoulin, Design data for hot-via interconnects in chip-scale packaged mmics up to 110 GHz, 12th GAAS Symposium, pp.495-498, 2004.

C. Saboureau, D. Baillargeat, S. Verdeyme, A. Bessemoulin, J. Bois et al., A microstrip-to-microstrip hot-via transition up-to 80 GHZ designed for direct PCB mounting of MMICs, 34th European Microwave Conference, pp.653-656, 2004.

P. Mezzanote, M. Mongiardo, L. Roselli, R. Sorrentino, and W. Heinrich, Analysis of packaged microwave integrated circuits by FDTD, IEEE Transactions on Microwave Theory and Techniques, vol.42, issue.9, pp.1796-1801, 1994.
DOI : 10.1109/22.310590

J. Yook, N. I. Dib, and L. P. Katehi, Characterization of high frequency interconnects using finite difference time domain and finite element methods, IEEE Transactions on Microwave Theory and Techniques, vol.42, issue.9, pp.1727-1735, 1994.
DOI : 10.1109/22.310581

A. C. Polycarpou, P. A. Tirkas, and C. A. Balanis, The finite-element method for modeling circuits and interconnects for electronic packaging, IEEE Transactions on Microwave Theory and Techniques, vol.45, issue.10, pp.1868-1874, 1997.
DOI : 10.1109/22.641784

J. Kunish and I. Wolff, The Compression Approach: A New Technique for the Analysis of Distributed Circuits Containing Nonlinear Elements, 21st European Microwave Conference, 1991, pp.15-31, 1992.
DOI : 10.1109/EUMA.1991.336524

M. N. Abdulla and M. B. Steer, A partitionning approach to large scale electromagnetic problems applied to an array of electromagnetic problems applied to an array of microstrip coupled slot antennas, IEEE MTT-S International Microwave Symposium Digest, pp.1783-1785, 1998.

F. Bordereau, D. Baillargeat, S. Verdeyme, M. Aubourg, P. Guillon et al., Global electromagnetic analysis to help the conception of an active module, IEEE MTT-S International Microwave Symposium Digest, pp.1921-1924, 2000.

F. Bodereau, D. Baillargeat, S. Verdeyme, M. Aubourg, and P. Guillon, Microwave module design applying a global elecromanetic analysis, IEEE MTT-S International Microwave Symposium Digest, pp.1779-1779, 1998.

C. Chun, A. Pham, J. Laskar, and B. Hutchison, Development of microwave package models utilizing on-wafer characterization techniques, IEEE Transactions on Microwave Theory and Techniques, vol.45, issue.10, pp.1948-1954, 1997.
DOI : 10.1109/22.641800

R. Grondin, S. El-ghazaly, and S. Goodnick, A review of global modeling of charge transport in semiconductors and full-wave electromagnétics, IEEE Trans On MTT, vol.47, p.943, 1999.

P. Ciampolini, L. Roselli, G. Stopponi, and R. Sorrentino, Global modeling strategies for the analysis of high-frequency integrated circuits, IEEE Transactions on Microwave Theory and Techniques, vol.47, issue.6, pp.950-955, 1999.
DOI : 10.1109/22.769331

T. Itoh, Full wave time-domain CAD tools for distributed non-linear microwave circuits Final Report 1998-1999 for MICRO Project 98-062 -Industrial Sponsor : Raytheon Systems Company, 1999.

M. Farina and T. Rozzi, Electromagnetic modeling of linear pHEMTs for millimeter waves, 2000 IEEE MTT-S International Microwave Symposium Digest (Cat. No.00CH37017), pp.1801-1804, 2000.
DOI : 10.1109/MWSYM.2000.862329

D. K. Ferry, A. M. Kriman, M. J. Kann, and R. P. Joshi, Molecular dynamics extensions of monte-carlo simulations in semi-conductor device models, Comp. Phys, vol.67, pp.119-134, 1991.

T. Shawki, G. Salmer, and O. El-sayed, MODFET 2-D hydrodynamic energy modeling: optimization of subquarter-micron-gate structures, IEEE Transactions on Electron Devices, vol.37, issue.1, pp.21-30, 1990.
DOI : 10.1109/16.43796

A. Witzig, C. Schuster, P. Regli, and W. Fichtner, Global modeling of microwave applications by combining the FDTD method and a general semiconductor device and circuit simulator, IEEE Transactions on Microwave Theory and Techniques, vol.47, issue.6, pp.919-920, 1999.
DOI : 10.1109/22.769327

S. M. Hammadi and S. M. , Global modeling of millimeter-wave circuits : Electromagnetics simulation of amplifiers, IEEE Trans. MTT, vol.45, pp.2208-2216, 1997.

I. Lim, R. O. Grondin, and S. M. , Ensemble monte carlo and fullwave electrodynamic models implemented self-consistenly on a parallel processor using perfectly matched layer boundary conditions, VLSI Syst. Des, vol.8, pp.407-412, 1998.

R. Gillard, M. Drissi, and J. Citerne, Full wave analysis in the frequency domain Analysis and Design of Integrated Circuit Antennas Module, pp.172-221, 2000.

K. S. Yee, Numerical solution of initial boundary value problems involving maxwell's equations in isotropic media, IEEE Trans. Antennas Propagat, pp.302-307, 1966.

W. Sui, D. A. Christensen, and C. H. Durney, Extending the two-dimensional FDTD method to hybrid electromagnetic systems with active and passive lumped elements, IEEE Transactions on Microwave Theory and Techniques, vol.40, issue.4, pp.724-730, 1992.
DOI : 10.1109/22.127522

Y. Begassat, Elaboration d'un simulateur electromagnétique global basé sur la méthode des différences finies dans le domaine temporel, Thèse de doctorat, 1996.

C. H. Durney, W. Sui, D. A. Christensen, and J. Zhu, A general formulation for connecting sources and passive lumped-circuit elements across multiple 3-D FDTD cells, IEEE Microwave and Guided Wave Letters, vol.6, issue.2, pp.85-87, 1996.
DOI : 10.1109/75.481997

Y. C. Lau, M. S. Leong, and P. S. Kooi, Modeling of chip resistors for highfrequency microwave applications with the use of FDTD method, Microwave and and Optical Technology Letters, pp.259-261, 1997.

J. Perda, F. Alimenti, P. Mezzanote, L. Roselli, and R. Sorrentino, A new algorithm for the incorporation of arbitrary linear lumped networks into FDTD simulators, IEEE Transactions on Microwave Theory and Techniques, vol.47, issue.6, pp.943-949, 1999.
DOI : 10.1109/22.769330

R. Gillard, S. Dauguet, and J. Citerne, Correction procedures for the numerical parasitic elements associated with lumped elements in global electromagnetic simulators, IEEE Transactions on Microwave Theory and Techniques, vol.46, issue.9, pp.1298-1306, 1998.
DOI : 10.1109/22.709473

T. Itoh, Comprehensive electromagnetic simulation of microwave integrated circuits, 1998.

V. S. Reddy and R. Garg, An improved extended FDTD formulation for active microwave circuits, IEEE Transactions on Microwave Theory and Techniques, vol.47, issue.9, pp.1603-1607, 1999.
DOI : 10.1109/22.788599

C. Kuo, V. A. Thomas, S. T. Chew, B. Houshmand, and T. Itoh, Small signal analysis of active circuits using FDTD algorithm, IEEE microwave and Guided Letters, vol.5, pp.216-218, 1995.

C. Kuo, B. Houshmand, and T. Itoh, Full-wave analysis of packaged microwave circuits with active and nonlinear devices : An FDTD approach, IEEE Trans. On MTT, vol.45, pp.819-826, 1997.

K. Ma, M. Chen, B. Houshmand, Y. Qian, and T. Itoh, Global time-domain full-wave analysis of microwave circuits involving highly nonlinear phenomena and EMC effects, IEEE Trans. On MTT, vol.47, pp.859-865, 1999.

N. Orhanovic, R. Raghuram, and N. Matsui, The use of SPICE lumped circuits as sub-grid models for FDTD analysis, Electronic Components and Technology Conference, 2001.

V. A. Thomas, M. E. Jones, M. Picket-may, A. Taflove, and E. Harrigan, The use of SPICE lumped circuits as sub-grid models for FDTD analysis, IEEE Microwave and Guided Wave Letters, vol.4, issue.5, pp.141-143, 1994.
DOI : 10.1109/75.289516

M. Bluck, S. Walker, and R. Ordovas, Time domain finite element methods for em modelling, European Congress on Computational Methods in Applied Sciences and Engineering, 2001.

H. Tsai, Y. Wang, and T. Itoh, An unconditionally stable extended (USE) finite-element time-domain solution of active nonlinear microwave circuits using perfectly matched layers, IEEE Transactions on Microwave Theory and Techniques, vol.50, issue.10, pp.2226-2232, 2002.
DOI : 10.1109/TMTT.2002.803442

S. Chang, R. Coccioli, Y. Qian, and T. Itoh, A global finite-element time-domain analysis of active nonlinear microwave circuits, IEEE Transactions on Microwave Theory and Techniques, vol.47, issue.12, pp.2410-2415, 1999.
DOI : 10.1109/22.808988

S. Chang, R. Coccioli, Y. Qian, and T. Itoh, Gobal finite-element timedomain analysis of active nonlinear microwave circuits, IEEE MTT-S International Microwave Symposium Digest, 1999.

J. Kunisch and I. Wolff, Steady-state analysis of nonlinear forced and autonomous microwave circuits using the compression approach, International Journal of Microwave and Millimeter-Wave Computer-Aided Engineering, vol.61, issue.4, pp.241-255, 1995.
DOI : 10.1002/mmce.4570050403

J. Kunisch, M. Rittweger, S. Heinen, and I. Wolff, The Compression Approach: A New Technique for the Analysis of Distributed Circuits Containing Nonlinear Elements, 21st European Microwave Conference, 1991, pp.1296-1301, 1991.
DOI : 10.1109/EUMA.1991.336524

M. Rittweger, M. Werthen, M. Kunisch, J. Wolff, I. Chall et al., 3D FDTD analysis of a SOT353 package containing a bipolar wideband cascode transistor using the compression approach, Proceedings of 1995 IEEE MTT-S International Microwave Symposium, pp.1587-1590, 1995.
DOI : 10.1109/MWSYM.1995.406279

J. Kunisch, A. Bahr, M. Rittweger, and I. Wolff, Analysis of nonlinear microwave circuits using the compression approach, 1993 IEEE MTT-S International Microwave Symposium Digest, pp.637-640, 1993.
DOI : 10.1109/MWSYM.1993.276987

C. E. Christoffersen and M. B. Steer, Implementation of the local reference node concept for spatially distributed circuits, International Journal of RF and Microwave Computer-Aided Engineering, vol.46, issue.5, pp.376-384
DOI : 10.1002/(SICI)1099-047X(199909)9:5<376::AID-MMCE2>3.0.CO;2-M

A. I. Khalil and M. B. Steer, Circuit theory for spatially distributed microwave circuits, IEEE Transactions on Microwave Theory and Techniques, vol.46, issue.10, pp.1500-1502, 1998.
DOI : 10.1109/22.721154
URL : http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.41.5346

K. Guillouard, M. Wong, V. F. Hanna, and J. Citerne, A new global finite element analysis of microwave circuits including lumped elements, IEEE Transactions on Microwave Theory and Techniques, vol.44, issue.12, pp.2587-2594, 1996.
DOI : 10.1109/22.554608

B. Linot, ModélisationModélisationélectromagnétique de circuits planaires hyperfréquences rayonnants incluant des composants localisés, Thèse de doctorat, 1995.

M. B. Steer, J. F. Harvey, J. W. Mink, M. N. Abdulla, C. E. Christoffersen et al., Global modeling of spatially distributed microwave and millimeter-wave systems, IEEE Transactions on Microwave Theory and Techniques, vol.47, issue.6, pp.830-837, 1999.
DOI : 10.1109/22.769316

C. E. Christoffersen, M. B. Steer, and M. A. Summers, Harmonic balance analysis for systems with circuit-field iterations, 1998 IEEE MTT-S International Microwave Symposium Digest (Cat. No.98CH36192), pp.1131-1134, 1998.
DOI : 10.1109/MWSYM.1998.705193

V. Rizzoli, A. Lipparini, A. Costanzo, F. Mastri, C. Ceccheti et al., State-of-the-art harmonic-balance simulation of forced nonlinear microwave circuits by the piecewise technique, IEEE Transactions on Microwave Theory and Techniques, vol.40, issue.1, pp.12-28, 1992.
DOI : 10.1109/22.108318

E. Larique, S. Mons, D. Baillargeat, S. Verdeyme, M. Aubourg et al., Linear and nonlinear FET modeling applying an electromagnetic and electrical hybrid software, IEEE Transactions on Microwave Theory and Techniques, vol.47, issue.6, pp.915-918, 1999.
DOI : 10.1109/22.769326

A. Laloue, J. David, R. Quere, B. Mallet-guy, E. Laporte et al., Extrapolation of a measurement-based millimeter-wave nonlinear model of pHEMT to arbitrary-shaped transistors through electromagnetic simulations, IEEE Transactions on Microwave Theory and Techniques, vol.47, issue.6, pp.908-914, 1999.
DOI : 10.1109/22.769325

A. Cidronali, G. Collodi, G. Vannini, A. Santarelli, and G. Manes, A new approach to FET model scaling and MMIC design based on electromagnetic analysis, IEEE Transactions on Microwave Theory and Techniques, vol.47, issue.6, pp.900-907, 1999.
DOI : 10.1109/22.769324

A. Cidronali, G. Collodi, A. Santarelli, G. Vannini, and G. Manes, Millimeter-wave FET modeling using on-wafer measurements and EM simulation, IEEE Transactions on Microwave Theory and Techniques, vol.50, issue.2, pp.425-431, 2002.
DOI : 10.1109/22.982219

T. Liang, J. A. Pla, P. H. Aaen, and M. Mahalingam, Equivalent-circuit modeling and verification of metal-ceramic packages for RF and microwave power transistors, IEEE Transactions on Microwave Theory and Techniques, vol.47, issue.6, pp.709-713, 1999.
DOI : 10.1109/22.769340

J. M. Wu, F. Y. Han, J. K. Jau, T. S. Horng, and C. C. Tu, Package and PCB effects on linearity of a micromixer-based W-CDMA upconverter, 34th European Microwave Conference, pp.245-248, 2004.

J. Lesage, R. Loison, R. Gillard, T. Barbier, and Y. Mancuso, A simple implementation of the compression approach for global EM analysis of microwave circuits, Special Issue of the International Journal of RF and Microwave Computer-Aided Engineering : Bridging between Microwave Engineering and Information Technologies, 2004.
DOI : 10.1002/mmce.20040
URL : https://hal.archives-ouvertes.fr/hal-00783537

D. K. Sun, J. F. Lee, and Z. Cendes, ALPS-A new fast frequency-sweep procedure for microwave devices, IEEE Transactions on Microwave Theory and Techniques, vol.49, issue.2, pp.398-402, 2001.
DOI : 10.1109/22.903107

J. E. Bracken and Z. Cendes, Asymptotic waveform evaluation for S-domain solution of electromagnetic devices, IEEE Transactions on Magnetics, vol.34, issue.5, pp.3232-3235, 1998.
DOI : 10.1109/20.717758

B. Anderson, J. E. Bracken, J. B. Manges, G. Peng, and Z. Cendes, Full-Wave Analysis in SPICE via Model-Order Reduction, IEEE Transactions on Microwave Theory and Techniques, vol.52, issue.9, pp.2314-2320, 2004.
DOI : 10.1109/TMTT.2004.834569

L. Zhu and K. Wu, Unified equivalent-circuit model of planar discontinuities suitable for field theory-based CAD and optimization of M(H)MIC's, IEEE Trans On MTT, vol.47, pp.987-992, 1999.

L. Li, K. Wu, and P. Russer, Improved numerical TRL calibration technique in a deterministic mom algorithm, 34th Europeen Microwave Conference Proceedings, pp.447-450, 2004.

G. Engen and C. Hoer, Thru-Reflect-Line: An Improved Technique for Calibrating the Dual Six-Port Automatic Network Analyzer, IEEE Transactions on Microwave Theory and Techniques, vol.27, issue.12, pp.987-992, 1979.
DOI : 10.1109/TMTT.1979.1129778

H. Packard, Product note 8510-8 network analysis Applying the HP 8510B TRL Calibration for non-coaxial measurements

D. M. Pozar, Artech house

R. W. Jackson and D. M. Pozar, Full-Wave Analysis of Microstrip Open-End and Gap Discontinuities, IEEE Transactions on Microwave Theory and Techniques, vol.33, issue.10, pp.1036-1042, 1985.
DOI : 10.1109/TMTT.1985.1133167

R. Pascaud, Rapport de stage : Modélisation EM globale 3D de bo??tiersbo??tiers hyperfréquences intégrant des composants actifs, 2004.

J. Lesage, R. Loison, R. Gillard, T. Barbier, and Y. Mancuso, Global EM analysis of packaging effects on MMIC amplifier isolation using the compression approach, Microwave and Optical technology Letters, 2005.
DOI : 10.1002/mop.20990
URL : https://hal.archives-ouvertes.fr/hal-00718312

T. Barbier, D. Caban-chastas, V. Rananjason, and P. Kertesz, Wide band organic solutions for MMIC packaging, IEEE MTT-S International Microwave Symposium Digest, 2005., 2005.
DOI : 10.1109/MWSYM.2005.1517179

J. J. Burke and R. W. Jackson, A simple circuit model for resonant mode coupling in packaged MMICs, 1991 IEEE MTT-S International Microwave Symposium Digest, pp.1221-1224, 1991.
DOI : 10.1109/MWSYM.1991.147240

R. Clark, A. Agrawal, and S. Miller, Simulation of multi-chip module package resonance using commercial finite element electromagnetic software, IEEE MTT-S International Microwave Symposium Digest, pp.1211-1214, 1995.

J. Lesage, R. Loison, R. Gillard, T. Barbier, and Y. Mancuso, Size reduction of MMIC packages using compression approach simulations, 2005 European Microwave Conference, 2005.
DOI : 10.1109/EUMC.2005.1608902
URL : https://hal.archives-ouvertes.fr/hal-00721251

S. Dauguet, SimulateurélectromagnétiqueSimulateurélectromagnétique globale de structures plannaires actives, Thèse de Doctorat, Institut National des Sciences Appliquées de Rennes, 1997.

M. A. Summers, C. E. Christoffersen, A. I. Khalil, S. B. Nakazawa, T. W. Nuteson et al., An integrated electromagnetic and non linear circuit simulation environlent for spatial combinig systems, IEEE MTT-S International Microwave Symposium Digest, pp.1473-1476, 1998.

V. Rizzoli, A. Costanzo, and E. Montanari, Coupled electromagnetic/nonlinear optimization of self-oscillating microstrip antennas with far-field performance specifications, 2002 IEEE MTT-S International Microwave Symposium Digest (Cat. No.02CH37278), pp.123-126, 2002.
DOI : 10.1109/MWSYM.2002.1011574

J. Lesage, R. Loison, R. Gillard, T. Barbier, and Y. Mancuso, Dispersion analysis of packaged MMIC amplifiers using the compression approach European Microwave conference, 2004.

R. H. Caverly, Characteristic impedance of integrated circuit bond wires, IEEE Trans. MTT, pp.982-984, 1986.

A. Technology, Data sheet, 85110A Pulsed RF S-Parameter Test Set

N. Quemeneur, Rapport de stage : Etude de l'influence des hauteurs de capot sur les performances des puces mmics encapsulés, 2004.