R. P. Wool and P. Gardner, Structure and Strength

J. F. Gouyet, Physique et structures fractales, 1992.

A. A. Roche, Traitements chimiques et électrochimiques du titane et de ses alliages : caractérisation des surfaces créées Adhésivité interfaciale dans des composites métal/résine. Villeurbanne, thèse de l, 1983.

S. Bentadjine, Mécanismes de formation et propriétés physico-chimiques et mécaniques des interphases epoxy-diamine / métal. Villeurbanne, thèse de l, 2000.

J. Bouchet, Influence des propriétés d'interphase sur le comportement aux chocs d'éléments structuraux multi-matériaux époxy-aluminium. Villeurbanne, thèse de l, 2000.

F. Gaillard, H. Hocquaux, M. Romand, and D. Verchère, Study by FTIR spectroscopy of the interfacial zone between zinc-coated steels and epoxy adhesives, Euradh'92, pp.122-127, 1992.

D. Verchere, H. Hocquaux, T. Marquais, and F. Gaillard, Collage entre acier galvanisé et résine époxydique, Euradh'92, pp.488-495, 1992.

S. Bentadjine, R. Petiaud, A. A. Roche, and V. Massardier, Organometallic complex characterization formed when liquid epoxy-diamine mixtures are applied onto metallic substrates, Polymer, issue.14, pp.42-6271, 2001.
DOI : 10.1016/s0032-3861(01)00034-9

S. Bentadjine, A. A. Roche, and J. Bouchet, Epoxy/diamine adhesive on metals : the interphase formation and characterization, in Adhesion aspects of thin films, 2001.

J. Bouchet and A. A. Roche, The Formation of Epoxy/Metal Interphases: Mechanisms and Their Role in Practical Adhesion, The Journal of Adhesion, vol.20, issue.9, pp.78-799, 2002.
DOI : 10.5006/1.3593851

J. Bouchet and A. A. Roche, The role of the interphase and its residual stresses in the determination of fracture toughness, in The application of fracture mechanics to polymers, adhesives and composites, pp.163-169, 2004.

J. Bouchet and A. A. Roche, The influence of epoxy-metal interphase properties on fracture toughness, in The application of fracture mechanics to polymers, adhesives and composites, pp.249-255, 2004.

J. Bouchet, A. A. Roche, and P. Hamelin, Internal stresses, Young???s modulus and practical adhesion of organic coatings applied onto 5754 aluminium alloy, Thin Solid Films, vol.355, issue.356, pp.355-356, 1999.
DOI : 10.1016/S0040-6090(99)00449-6

J. Bouchet, A. A. Roche, and E. Jacquelin, The role of the polymer/metal interphase and its residual stresses in the critical strain energy release rate (Gc) determined using a three-point flexure test, Journal of Adhesion Science and Technology, vol.1, issue.3, pp.15-345, 2001.
DOI : 10.1163/156856194X00366

J. Bouchet, A. A. Roche, and E. Jacquelin, How do residual stresses and interphase mechanical properties affect practical adhesion of epoxy diamine/metallic substrate systems?, Journal of Adhesion Science and Technology, vol.37, issue.12, pp.16-1603, 2002.
DOI : 10.1163/156856101753213312

J. Bouchet, A. A. Roche, E. Jacquelin, and G. W. Scherer, Practical adhesion of organic coatings to metal: the role of the interphase and its residual stresses, in Adhesion aspects of thin films, pp.217-237, 2001.

C. Fauquet, E. , C. Fauquet, P. Dubot, L. Minel et al., Paris, thèse de l'Université Paris 6, 1992, 130 p. 19 Adsorption of monoethanolamine on clean, oxidized and hydroxylated aluminium surfaces: a model for amine-cured epoxy/aluminium interfaces, Applied Surface Science, issue.4, pp.81-435, 1994.

F. Debontridder, Influence de l'acidité de surface sur les mécanismes précurseurs de formation d'une interphase dans les assemblages epoxy-aluminium

M. Duprat and F. Dabosi, Corrosion Inhibition of a Carbon Steel in 3% NaCl Solutions by Aliphatic Amino-Alcohol and Diamine Type Compounds, CORROSION, vol.37, issue.2, pp.89-92, 1981.
DOI : 10.5006/1.3593851

M. G. Barthès-labrousse, Adhesion Mechanisms at Amine-Cured Epoxy/Aluminium Interfaces, The Journal of Adhesion, vol.75, issue.1-4, pp.65-75, 1996.
DOI : 10.1016/0169-4332(94)90048-5

G. S. Randall, B. , and J. P. , Epoxy adhesion to metal Advances in Polymer Science, pp.75-108, 1986.

P. M. Montois, J. Evieux, V. Nassiet, Y. Baziard, and J. A. Petit, Durabilité de joints collés structuraux époxyde/alliage de titane Application à l'étude d'une interphase modèle, Sciences et génie des Matériaux, 2002.

P. Montois, V. Nassiet, Y. Baziard, and J. A. Petit, Comportement mécanique et thermomécanique d'une réseau modèle époxy-diamine. Etude du vieillissement humidotherme et application à l'étude d'une interphase particulière, JADH, 29 septembre-3 octobre 2003, pp.72-75

P. Montois, V. Nassiet, J. Evieux, Y. Baziard, and J. A. Petit, Comparative and thermomecanical study between a bulk and a joint epoxy-amine system. Application to the adhesive joint ageing, Euradh, pp.161-164, 2002.

P. Montois, V. Nassiet, J. A. Petit, Y. W. Baziard, C. Possart et al., Viscosity effect on epoxy???diamine/metal interphases, 26th annual meeting of the adhesion society, pp.23-26, 2003.
DOI : 10.1016/j.ijadhadh.2005.06.003

W. Possart, C. Bockenheimer, and B. Valeske, The influence of mechanical pretreatment on the polymer structure of adhesive bonds, 2000.

W. Possart and J. K. Krüger, Adhesion and network formation in the interphase between curing adhesives and metals, Euradh, 2002.

W. Possart and J. K. Krüger, Adhesion, network formation and properties of curing adhesives in the interphase to metals, Annual Meeting of the adhesion society, pp.104-106, 2002.

J. Kanzow, P. S. Horn, M. Kirschmann, V. Zaporojtchenko, K. Dolgner et al., Formation of a metal/epoxy resin interface, Applied Surface Science, vol.239, issue.2, pp.239-227, 2005.
DOI : 10.1016/j.apsusc.2004.05.239

W. Possart, J. K. Kruger, C. Wehlack, U. Muller, C. Petersen et al., Formation and structure of epoxy network interphases at the contact to native metal surfaces, Press, Corrected Proof. 35. A. A. ROCHE, Les théories de l'adhésion et mesure de l'adhérence. Le vide, les couches minces, pp.257-197, 1991.
DOI : 10.1016/j.crci.2005.04.009

A. Gerschel and L. Intermoléculaires, CNRS Editions & InterEditions: Paris. 274 p. 37 Review : the science of adhesion. Part I: surface and interfacial aspects, A. J. KINLOCH J. Mater. Sci, pp.15-2141, 1980.

L. H. Lee, Adhesive bonding, pp.1-26, 1991.
DOI : 10.1007/978-1-4757-9006-1

S. R. Hartshorn, Structural adhesives: Chemistry and technology, 1986.
DOI : 10.1007/978-1-4684-7781-8

J. W. Macbain, D. G. Hopkins, B. V. Hms, Y. P. Deryagin, and . Toprov, Research committee: London. 42 Role of the molecular and electrostatic forces in the adhesion of polymers, in Physico-chemical aspects of polymer surface, pp.605-626, 1926.

J. M. Cuntz, Contribution à la compréhension des mécanismes de dégradation des assemblages collés métal-métal (alliages légers) Mémoire d'ingénieur CNAM, D. J. ARROWSMITH, Transactions of the Institution of Metal Finishing, issue.88, pp.110-154, 1970.

C. Boiziau and G. Lécayon, Modelling the elementary mechanisms involved in grafting polymers onto metals ??? relationship between structure and properties of the resulting product, International Journal of Adhesion and Adhesives, vol.6, issue.4, pp.207-214, 1986.
DOI : 10.1016/0143-7496(86)90007-2

C. Bureau, M. Defranceschi, J. Delhalle, G. Deniau, J. Tanguy et al., Theoretical monomer/cluster model of a polymer/metal interface: poly(methacrylonitrile) on a nickel surface, Surface Science, vol.311, issue.3, pp.311-349, 1994.
DOI : 10.1016/0039-6028(94)91425-7

C. Boiziau and G. Lecayon, Adhesion of polymers to metals: A review of the results obtained studying a model system, Surface and Interface Analysis, vol.3, issue.9, pp.475-485, 1988.
DOI : 10.1002/sia.740120902

S. Leroy, C. Boiziau, G. Lécayon, C. L. Gressus, C. Makram et al., Elaboration of a thin adherent film of pyrolytic carbon on oxidizable metals, Materials Letters, vol.3, issue.5-6, pp.5-6, 1985.
DOI : 10.1016/0167-577X(85)90064-3

J. Perreau, C. Reynaud, C. Boiziau, G. Lecayon, M. Makram et al., Electric field influence on the bonding of CH2CHCN onto a nickel surface, Surface science, vol.162, pp.1-3, 1985.

W. J. Van-oij, Interfacial interaction between polymer and other materials, in Physicochemical aspects of polymer surfaces, pp.1035-1052, 1968.

S. S. Voyutskii, Autoadhesion and adhesion of high polymers, 1963.

J. J. Bikerman, The science of adhesives joints Acad. Press: New York. 273 p. 55. F. M. FOWKES, Acid-base interactions in polymer adhesion, in Physico-chemical aspects of polymer surfaces, pp.583-600, 1983.

S. Buchan and W. D. Rae, Chemical nature of the rubber to glass bond, Trans. Inst. Rubb. Ind, pp.205-216, 1920.

J. Marsh, L. Minel, M. G. Barthes-labrousse, and D. Gorse, The nature of the surface acidity of anodised titanium: an XPS study using 1,2-diaminoethane, Applied Surface Science, vol.99, issue.4, pp.99-335, 1996.
DOI : 10.1016/0169-4332(96)00601-0

A. J. Kinloch, J. S. Roche, W. L. Solomon, and . Baun, Durability of structural adhesives Phosphate-fluoride etching effects on titanium alloy surfaces, Appl. Sci. Publishers Applications of Surface Science, vol.7, issue.12, pp.83-96, 1981.

K. L. Mittal, Adhesive joints: formation, characteristics and testing, 1984.
DOI : 10.1007/978-1-4613-2749-3

J. S. Solomon and D. E. Hanlin, AES and SEM characterization of anodized aluminum alloy adherends for adhesive bonding application, Applications of Surface Science, vol.4, issue.3-4, pp.4-7, 1980.
DOI : 10.1016/0378-5963(80)90081-1

W. L. Baun, Applications of surface analysis techniques to studies of adhesion, Applications of Surface Science, vol.4, issue.3-4, pp.4-7, 1980.
DOI : 10.1016/0378-5963(80)90080-X

W. B. Jensen, The Lewis acid-base definitions: a status report, Chemical Reviews, vol.78, issue.1, pp.1-30, 1978.
DOI : 10.1021/cr60311a002

G. A. Parks, The Isoelectric Points of Solid Oxides, Solid Hydroxides, and Aqueous Hydroxo Complex Systems, Chemical Reviews, vol.65, issue.2, pp.177-198, 1965.
DOI : 10.1021/cr60234a002

P. Grecias and R. Didier, Chimie générale : Cours et exercices résolus

J. N. Brønsted, Some Remarks on the Concept of Acids and Bases, Recueil des Travaux Chimiques des Pays-Bas, pp.718-728, 1923.
DOI : 10.4159/harvard.9780674366701.c69

R. S. Drago, L. B. Parr, and C. S. Chamberlain, Solvents effects and their relationship to the E and C equation, Journal of the American Chemical Society, issue.10, pp.99-3203, 1977.

E. Darque-ceretti, E. Felder, and A. , CRS Editions: Paris. 388 p. 69. V. GUTMANN, The donor-acceptor approach to molecular interactions, 1978.

J. C. Bolger, Acid-base interaction between oxide surfaces and polar organic compounds, in Adhesion aspect of organic coatings, pp.3-18, 1983.

R. A. Wagenen and J. D. Andrade, Flat plate streaming potential investigations: Hydrodynamics and electrokinetic equivalency, Journal of Colloid and Interface Science, vol.76, issue.2, pp.76-305, 1980.
DOI : 10.1016/0021-9797(80)90374-4

S. Lopez, J. P. Petit, H. M. Dunlop, J. R. Butruille, and G. Tourillon, Acid-Base Properties of Passive Films on Aluminum. I. A Photoelectrochemical Study, Journal of the Electrochemical Society, issue.3, pp.145-823, 1998.

V. Vujinic and B. Lovrecek, Properties of the boehmitized aluminium surface, Surface Technology, vol.17, issue.1, p.29, 1982.
DOI : 10.1016/0376-4583(82)90058-9

W. M. Mullins and B. L. Averbach, Bias-reference X-Ray photoelectron spectroscopy of sapphire and yttrium aluminum garnet crystals, Surface Science, vol.206, issue.1-2, pp.29-40, 1988.
DOI : 10.1016/0039-6028(88)90012-X

M. C. Jodin, De la prise en compte des hétérogénéités morphologiques et structurales vers l'interprétation de la réactivité globale d'un hydroxyde d'aluminium. Chimie et physico-chimie moléculaires, 2004.

T. Hiemstra, P. Venema, and W. H. Vanriemsdijk, Intrinsic Proton Affinity of Reactive Surface Groups of Metal (Hydr)oxides: The Bond Valence Principle, Journal of Colloid and Interface Science, vol.184, issue.2, pp.184-680, 1996.
DOI : 10.1006/jcis.1996.0666

T. Hiemstra, W. H. Vanriemsdijk, and G. H. Bolt, Multisite proton adsoption modelling at solid/solution interface of (hydr)oxides: a new approach. 1. Model description and evaluation of intrinsic reaction constants, Journal of colloid and interface science, issue.1, pp.133-91, 1989.

B. , P. De-la, and D. , Les complexes en chimie analytique, comment choisir rationnellement les meilleures méthodes d'analyse complexométrique, Beilstein Institut zur Foerderung der Chemischen Wissenschaften. 2003. 79. BEILSTEIN, pKa de la DAE Beilstein Institut zur Foerderung der Chemischen Wissenschaften, p.45, 1955.

X. Y. Lin, F. Creuzet, and H. Arribart, Atomic force microscopy for local characterization of surface acid-base properties, The Journal of Physical Chemistry, vol.97, issue.28, pp.97-7272, 1993.
DOI : 10.1021/j100130a025

Y. K. Agrawal, J. D. Talati, M. D. Shah, M. N. Desai, and N. K. Shah, Schiff bases of ethylenediamine as corrosion inhibitors of zinc in sulphuric acid, Corrosion Science, vol.46, issue.3, pp.46-633, 2004.
DOI : 10.1016/S0010-938X(03)00174-4

S. Aksu and F. M. Doyle, Electrochemistry of Copper in Aqueous Ethylenediamine Solutions, Journal of The Electrochemical Society, vol.149, issue.7, pp.340-347, 2002.
DOI : 10.1149/1.1481067

M. Pourbaix, Atlas d'équilibres électrochimiques. 1963, gauthier-villars & cie: Paris

K. Horie, H. Hiura, M. Sawada, I. Mita, and H. Kambe, Calorimetric investigation of polymerisation reactions. III. Curing reaction of epoxides with amines, Journal of Polymer Science, issue.8, pp.1357-1372, 1970.

C. C. Riccardi, H. E. Adabbo, and R. J. Williams, Curing reaction of epoxy resins with diamines, Journal of Applied Polymer Science, vol.29, issue.8, pp.29-2481, 1984.
DOI : 10.1002/app.1984.070290805

J. Galy, A. Sabra, and J. P. Pascault, Characterisation of epoxy thermosetting systems by differential scanning calorimetry, Polym. Eng. Sci, pp.26-1514, 1986.

B. Rives, Adhérence de primaires aéronautiques sur oxydes d'aluminium, Sciences des Matériaux, vol.168, 1999.

J. Cognard, S. Et-technologie-du-collage, S. Audisio, M. Caillet, A. Galerie et al., Revêtements et traitements de surface: fonctionnalités, durabilité, procédés Presses polytechniques et universitaires romandes: Lausanne Analyse et technologie des surfaces: couches minces et tribologie, Presses polytechniques et universitaires romandes: Lausanne. 495 p. 97. S. WERNICK and R. PINNER, Les traitements de surface et la finition de l'aluminium et de ses alliages, 1959.

J. W. Diggle, T. C. Downie, and C. W. Goulding, Anodic oxide films on aluminium, Chem. Rev, pp.69-365, 1969.

O. Sindt, J. Perez, and J. F. Gerard, Molecular architecture-mechanical behaviour relationships in epoxy networks, Polymer, vol.37, issue.14, pp.37-2989, 1996.
DOI : 10.1016/0032-3861(96)89396-7

Y. Won, Influence de la structure de réseaux époxydes modèles sur les propriétés volumétriques, mécaniques et viscoélastiques. Villeurbanne, thèse de l'INSA de Lyon, 1989.

R. J. Young, Chap 3 -Spectroscopic analysis of polymers, in Introduction to polymers, pp.137-143, 1981.

D. L. Allara and J. D. Swalen, An infrared reflection spectroscopy study of oriented cadmium arachidate monolayer films on evaporated silver, The Journal of Physical Chemistry, vol.86, issue.14, pp.86-2700, 1982.
DOI : 10.1021/j100211a029

M. Meiller, A. A. Roche, and H. Sautereau, Tapered double cantilever beam test used as a practical adhesion test for metal/adhesive/metal systems, Journal of Adhesion Science and Technology, vol.28, issue.7, pp.773-788, 1999.
DOI : 10.1163/156856199X01009

A. A. Roche, P. Dole, and M. Bouzziri, Measurement of the practical adhesion of paint coatings to metallic sheets by the pull-off and three-point flexure tests, Journal of Adhesion Science and Technology, vol.7, issue.6, pp.587-609, 1994.
DOI : 10.1163/156856194X00366

A. Roche, J. C. Laout, and M. Romand, Adhérence de peintures industrielles sur acier: utilisation des tests d'arrachement par traction et de flexion trois points

A. A. Roche, J. Behme, A. K. , and J. S. Solomon, A three-point flexure test configuration for improved sensitivity to metal/ adhesive interfacial phenomena, International Journal of Adhesion and Adhesives, vol.2, issue.4, pp.249-254, 1982.
DOI : 10.1016/0143-7496(82)90032-X

F. J. Von and . Preissig, Applicability of the classical curvature-stress relation for thin films on plate substrates, Journal of Applied Physics, vol.66, issue.9, pp.4262-4268, 1989.

A. A. Roche and J. Guillemenet, Mechanical and chemical properties of organic coatings applied to metallic sheet substrates. Thin solid films, pp.52-60, 1999.

M. Benabdi, Etude des propriétés mécaniques de l'interphase polymère/métal. Villeurbanne, thèse de l, 1998.

M. Benabdi and A. A. Roche, Mechanical properties of thin and thick coatings applied to various substrates. Part I. An elastic analysis of residual stresses within coating materials, Journal of Adhesion Science and Technology, vol.250, issue.2, pp.281-299, 1997.
DOI : 10.1163/156856197X00363

M. Benabdi and A. A. Roche, Mechanical properties of thin and thick coatings applied to various substrates. Part II. Young's modulus determination of coating materials*, Journal of Adhesion Science and Technology, vol.92, issue.3, pp.11-373, 1997.
DOI : 10.1163/156856197X00769

A. A. Roche, J. Dumas, J. F. Quinson, and M. Romand, Determination of Young's modulus of materials by a three point flexure test. Applications to metallic and organic sheets, thin film coatings, and low density aerogels, in Mechanics and mechanisms of damage in composites and multi-materials, ESIS publication, pp.269-282, 1991.

M. L. Mehan and L. S. Schadler, Micromechanical behavior of short-fiber polymer composites, Composites Science and Technology, vol.60, issue.7, pp.1013-1026, 2000.
DOI : 10.1016/S0266-3538(99)00194-3

M. G. Bader and W. H. Bowyer, The mechanical properties of thermoplastics strengthened by short discontinuous fibres, Journal of Physics D: Applied Physics, vol.5, issue.12, pp.2215-2226, 1972.
DOI : 10.1088/0022-3727/5/12/311

M. Miwa and N. Horiba, Effects of fibre length on tensile strength of carbon/glass fibre hybrid composites, Journal of Materials Science, vol.23, issue.4, pp.973-977, 1994.
DOI : 10.1007/BF00351419

V. Saintgobain, Déclaration environnementale de produit: E- PELTEX-STD, 2004.

N. Poisson, Nouvelles formulations epoxy renforcées pour préimprégnation hotmelt . Réactivité, rhéologie, mise en oeuvre et propriétés mécaniques, Matériaux macromoléculaires et composites, 1996.

Y. G. Lin, H. Sautereau, and J. P. Pascault, BDMA-catalyzed DDA-epoxy resin system: Temperature and composition effects on curing mechanism, Journal of Polymer Science Part A: Polymer Chemistry, vol.24, issue.9, pp.24-2171, 1986.
DOI : 10.1002/pola.1986.080240911

C. H. Scientific, Optical spectroscopy: sampling techniques manual, 1987.

D. Chen and J. P. Pascault, ISurface properties of epoxy systems. 1: Influence of the chemical structure on surface energy of monomers, comonomers and additives, Die Makromolekulare Chemie, vol.192, issue.4, pp.867-882, 1991.
DOI : 10.1002/macp.1991.021920412

W. Possart, J. K. Krüger, C. Wehlack, U. Müller, C. Petersen et al., Formation and structure of epoxy network interphases at the contact to native metal surfaces, Comptes Rendus Chimie, vol.9, issue.1, pp.60-79, 2006.
DOI : 10.1016/j.crci.2005.04.009

O. Isnard and J. Vicat, Diffusion, diffraction des neutrons : Comparaison avec les rayons X, 2000.

B. Normand, N. Pebere, C. Richard, and M. Wery, Prévention et lutte contre la corrosion : Une approche scientifique et technique. Sciences appliquées de l'INSA de Lyon, 2004.

B. Diers and F. Maze-coradin, Le remplacement du mélange sulfochromique. l'actualité chimique, pp.275-308, 2004.

V. Tableau, Influence des caractéristiques des amines sur l'adhérence des systèmes époxydeamine sur l'aluminium, 146 FOLIO ADMINISTRATIF THESE SOUTENUE DEVANT L'INSTITUT NATIONAL DES SCIENCES APPLIQUEES DE LYON NOM : AUFRAY DATE de SOUTENANCE, p.28, 2005.

T. Prénoms:-maëlenn, Caractérisation physico-chimique des interphases époxyde-amine / oxyde ou hydroxyde métallique, et de leurs constituants Physico-chemical characterization of epoxy-amine / metal interphases, characterization of their constituents NATURE : Doctorat Numéro d'ordre : 05

B. I. Cote and . Lyon, et bis CLASSE : RESUME : Les caractéristiques des systèmes collés ou peints époxyde-amine/métal dépendent des caractéristiques de chacun des constituants mais aussi de leur "combinaison". En particulier, l'interphase possède des propriétés spécifiques. La chimisorption de l'amine sur le métal et la dissolution de la couche d'hydroxyde initialement présente à sa surface sont simultanées. Le complexe organométallique créé réagit avec le monomère époxyde pour former un réseau aux propriétés physico-chimiques spécifiques. Lorsque la configuration des complexes permet leur cristallisation, et que leur produit de solubilité est dépassé, les complexes précipitent pour donner naissance à des cristaux de facteur de forme très important, Quand un polymère est réalisé avec ces complexes, les cristaux jouent le rôle de charges