]. P. Bibliographie-[-agati2001, F. Agati, M. Lerouge, and F. Rossetto, Résistance des matériaux, Mars, p.49, 2001.

]. J. Bagdahn2001, J. Bagdahn, M. Schischka, W. N. Petzold, and .. Sharpe, Fracture Toughness and Fatigue Investigations of Polycristalline Silicon, Proc. SPIE, pp.159-168, 2001.

M. Budinger, C. Pellet, S. Muratet, J. Fourniols, and .. , Modélisation analytique de micro actionneurs thermiques, pp.15-16, 2004.

]. J. Butler1997, V. M. Butler, W. D. Bright, .. Cowan, D. Castillejo et al., Courtois, Failure mechanisms and fault classes for CMOS-compatible microelectromechanical systems, IEEE Int. Test Conference, vol.54, issue.7, pp.284-293, 1997.

]. R. Chen2002, C. Chen, G. B. Kung, and .. Lee, Analysis of the optimal dimension on the electrothermal microactuator, J. Micromech. Microeng, vol.12, issue.31, pp.291-296, 2002.

]. M. Chiao2000, L. Chiao, and .. Lin, Self-buckling of micromachined beams under resistive heating, Journal of Microelectromechanical Systems, vol.9, issue.1, p.31, 2000.
DOI : 10.1109/84.825789

P. Comtois, V. M. Bright, and .. , Thermal microactuators for sufacemicromachining processes The International Society for Optical Engineering Surface micromachined polysilicon thermal actuators arrays and applications, Tech. Digest, Solid-State Sensor and Actuator Workshop, 91 [Comtois1997] J.H. Comtois, V.M. Bright, Applications for surface-micromachined polysilicon thermal actuators and arrays, Sensors and Actuators A58, pp.10-21, 1995.

]. J. Comtois1998, M. A. Comtois, C. C. Michalicek, .. A. Barron, R. S. Conant et al., Cyclic fatigue testing of surface-micromachined thermal actuators, Electrothermal actuators fabricated in four-level planarized surface micromachined polycristalline silicon, Sensors and Actuators A70 passim [Coventor2005, pp.23-31, 1998.

]. M. Delpedro, T. Del-pedro, and .. Gmür, Eléments de mécanique des structures, Presses polytechniques et universitaires romandes, p.155, 2001.

P. Richard and . Feynman, There's Plenty of Room at the Bottom (transcription d'une allocution donnée par Richard P. Feynman le 36 décembre 1959 à la réunion annuelle de l, Journal MEMS, vol.1, issue.1 2, 1992.

]. R. Hickey2002, M. Hickey, T. Kujath, and .. Hubbard, Heat transfer analysis and optimization of two-beam microelectromechanical thermal actuators, Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films, vol.20, issue.3, p.126, 2002.
DOI : 10.1116/1.1468654

]. R. Hickey2003, D. Hickey, T. Sameoto, M. Hubbard, and .. Kujath, Time and frequency response of two-arm micromachined thermal actuators, Journal of Micromechanics and Microengineering, vol.13, issue.1, pp.40-46, 2003.
DOI : 10.1088/0960-1317/13/1/306

Q. Huang and N. K. Lee, Analysis and design of polysilicon thermal flexure actuator, Journal of Micromechanics and Microengineering, vol.9, issue.1
DOI : 10.1088/0960-1317/9/1/308

]. R. Johnstone2002, M. Johnstone, .. Parameswaran, R. Kapels, J. Aigner et al., Theoretical limits on the freestanding length of cantilevers produced by surface micromachining technology, Proc. IEEE Transactions on Electron Devices, pp.855-861, 2000.
DOI : 10.1088/0960-1317/12/6/317

]. E. Kolesar1999, P. B. Kolesar, J. T. Allen, J. M. Howard, and . Wilken, Thermally actuated microbeam for large in-plane mechanical deflections, Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films, vol.17, issue.4, pp.2257-2263, 1999.
DOI : 10.1116/1.581757

Y. Lai, J. Mcdonald, M. Kujath, T. Hubbard, and .. , Force, deflection and power measurements of toggled microthermal actuators, Journal of Micromechanics and Microengineering, vol.14, issue.1, pp.49-56, 2004.
DOI : 10.1088/0960-1317/14/1/307

]. A. Liotard2005, S. Liotard, F. Muratet, J. Y. Zamkotsian, and . Fourniols, Static and dynamic micro deformable mirror characterization by phase-shifting and time-averaged interferometry, Optical Fabrication, Metrology, and Material Advancements for Telescopes
DOI : 10.1117/12.550326

]. C. Muhlstein2000, S. B. Muhlstein, R. O. Brown, and . Ritchie, High-Cycle Fatigue of Polycristalline Silicon Thin Films in Laboratory Air, MRS Symposium Proc. 657

]. S. Muratet2003, J. Y. Muratet, G. Fourniols, A. Soto-romero, A. Endemano et al., MEMS reliability modeling methodology: application to wobble micromotor failure analysis, Microlectronics Reliability, vol.43, pp.9-11, 1945.

]. S. Muratet2004, J. Y. Muratet, and . Fourniols, Microsystems and applications to space: reliability modeling methodology, Advancing Microelectronics Magazine, vol.31, p.25, 2004.

R. Koester, A. Cowen, R. Mahadevan, M. Stonefield, B. Hardy et al., PolyMUMPs Design Handbook, revision 10, ., pp.97-97, 2003.

J. R. Reid, V. M. Bright, J. T. Butler, and .. , Automated assembly of flip-up micromirrors, Sensors and Actuators A66, pp.292-298, 1998.

S. Rigo, J. Alexis, T. Masri, J. M. Desmarres, J. A. Petit et al., un outil pour la micro caractérisation des matériaux issus des technologies MEMS, 2èmes journées du RTP fiabilité, 15-16 Mars, p.31, 2004.

/. C. Rybicki, P. Pirouz, and .. , Indentation plasticity and fracture in silicon, p.93, 1988.

S. Muratet and J. , Fourniols, « Microsystems and applications to space: reliability modeling methodology », Advancing Microelectronics Magazine, 2004.

S. Muratet, J. Y. Fourniols, G. Soto-romero, A. Endemano, and A. Marty, « MEMS reliability modeling methodology: application to wobble micromotor failure analysis », Microelectronics Reliability, pp.9-111945, 2003.

G. Desmulliez, «. Overton, and . Vhdl, AMS modelling and simulation of a planar electrostatic micromotor, Journal of Micromechanics and Microengineering Revues Nationales, vol.13, pp.580-590, 2003.

S. Muratet and J. Y. Fourniols, « Les microsystèmes : conception, simulation, tests et caractérisations

S. Muratet and J. Y. , Fourniols, « Modelling for the reliability predictive analysis of electro thermal actuators, 7th International Workshop on Electronics, Control, Modelling, Measurement and Signals (ECMS'2005), pp.17-20, 2005.

A. Liotard, S. Muratet, F. Zamkotsian, and J. Y. Fourniols, Static and dynamic micro deformable mirror characterization by phase-shifting and time-averaged interferometry », Conference on Reliability, Packaging, Testing and Characterization of MEMS, MOEMS IV (MEMS-MOEMS'2005), pp.22-27, 2005.

C. Nationales-avec-actes-et-comité-de-lecture, S. Muratet, and J. Mai, Fourniols, « Modélisation pour analyse prédictive de la fiabilité des micro actionneurs électrothermiques », colloque annuel de l'école doctorale Génie Électrique, p.17, 2005.

S. Muratet and J. Y. , Fourniols, « Microsystèmes et applications à l'espace : méthodologie pour modélisation de la fiabilité, 13ème Forum de l'Interconnexion et du Packaging Microélectronique (IMAPS 2003), pp.20-22, 2003.

H. Camon, J. Y. Fourniols, S. Muratet, and B. Estibals, Microsyst??mes ?? actionnement ??lectrostatique: conception, mod??lisation et caract??risation, 12-13 Mars 2003. Rapports internes S. Muratet, J.Y. Fourniols, « MEMS SOI designs characteristics in MPW process », Rapport LAAS N°04370, Contrat Tronic's, p.37, 2004.
DOI : 10.1051/bib-j3ea:2003602