M. R. Ashory and D. J. Ewins, Generation of the whole frf matrix from measurements on one column, IMAC XVI, pp.800-814, 1998.

P. Avitabile, J. O-'callahan, and C. M. Chou, Expansion of rotational degrees of freedom for structural dynamic modification, IMAC V, vol.2, pp.950-955, 1987.

P. Avitabile, J. O. Callahan, and J. Milani, Comparison of complex and proportional mode structural modification techniques, IMAC VI, pp.555-565, 1988.

P. Avitabile, J. O. Callahan, and F. Peshinsky, Understanding structural modification truncation, IMAC VIII, pp.43-54, 1990.

E. Balmès, Modèles analytiques réduits et modèles expérimentaux complets en dynamique des structures

E. Balmès, Frequency domain identification of structural dynamics using the pole/residue parametrization, IMAC, pp.540-546, 1996.

E. Balmès, Optimal ritz vectors for component mode synthesis using singular value decomposition, AIAA Journal, vol.34, issue.6, pp.1256-1260, 1996.

E. Balmès, NEW RESULTS ON THE IDENTIFICATION OF NORMAL MODES FROM EXPERIMENTAL COMPLEX MODES, Mechanical Systems and Signal Processing, vol.11, issue.2, pp.229-243, 1997.
DOI : 10.1006/mssp.1996.0058

E. Balmès, Sensors, degrees of freedom, and generalized modeshape expansion methods, IMAC XVII, 1999.

E. Balmès, Méthodes de modification structurale. application à la tkj de chooz b2, 2000.

E. Balmès, Review and evaluation of shape expansion methods, IMAC XVIII, 2000.

E. Balmès and L. Billet, Using expansion and interface reduction to enhance structural modification methods, IMAC XIX, pp.615-621, 2001.

E. Balmès, C. Chapelier, P. Lubrina, and P. Fargette, An evaluation of modal testing results based on the force appropriation method, IMAC, pp.47-53, 1995.

E. Balmès and J. M. Leclère, Structural Dynamics Toolbox 5.0 (for use with MATLAB). SDTools, 2002.

J. L. Batoz and G. Dhatt, Modélisation des structures par éléments finis -Tomes 1, 2 & 3. Hermès, 1990.

J. K. Bennighof and R. B. Lehoucq, An Automated Multilevel Substructuring Method for Eigenspace Computation in Linear Elastodynamics, SIAM Journal on Scientific Computing, vol.25, issue.6, 2001.
DOI : 10.1137/S1064827502400650

F. Bourquin, Component mode synthesis and eigenvalues of second order operators : discretization and algorithm, ESAIM: Mathematical Modelling and Numerical Analysis, vol.26, issue.3, pp.385-423, 1992.
DOI : 10.1051/m2an/1992260303851

F. Bourquin and F. , Numerical study of an intrinsic component mode synthesis method, Computer Methods in Applied Mechanics and Engineering, vol.97, issue.1, 1992.
DOI : 10.1016/0045-7825(92)90107-U
URL : https://hal.archives-ouvertes.fr/inria-00075231

M. Corus, E. Balmès, and L. Billet, Amélioration de méthodes de modification structurale par utilisation de techniques d'expansion et de réduction d'interface. Proceedings of the " Congrès d'Analyse Modale Expérimentale, 2001.

M. Corus, E. Balmès, and L. Billet, Am??lioration de m??thodes de modification structurale par utilisation de techniques d'expansion et de r??duction d'interface??: applications, Journal de Physique IV (Proceedings), vol.12, issue.11, 2001.
DOI : 10.1051/jp4:20020487

R. R. Craig, A review of time-domain and frequency-domain component mode synthesis methods, Journal of Modal Analysis, pp.59-72, 1987.

R. R. Craig and M. C. Bampton, Coupling of substructures for dynamic analyses, AIAA Journal, vol.6, issue.7, pp.1313-1319, 1968.

R. R. Craig and C. J. Chang, Substructure coupling for dynamic analysis and testing. NASA CR-2781, 1977.

J. M. Cros, Parallel modal synthesis methods in structural dynamics, Contemporary Mathematics, vol.218, pp.492-499, 1998.
DOI : 10.1090/conm/218/03048

W. D. Ambrogio and A. Sestieri, Models for accounting /eliminating rotational dofs in distributed structural modification, IMAC XVII, pp.220-226, 1999.

W. D. Ambrogio and A. Sestieri, Using distributed modifications to change the dynamic behaviour of structures, IMAC XVII, pp.763-768, 1999.

W. D. Ambrogio and A. Sestieri, COUPLING THEORETICAL DATA AND TRANSLATIONAL FRFS TO PERFORM DISTRIBUTED STRUCTURAL MODIFICATION, Mechanical Systems and Signal Processing, vol.15, issue.1, pp.157-172, 2001.
DOI : 10.1006/mssp.2000.1368

J. C. Deel and Y. W. Luk, Modal testing considerations for structural modification applications, IMAC III, pp.46-52, 1985.

G. Dhatt and G. Touzot, Une présentation de la méthode des éléments finis. Maloine, second edition, 1984.

B. Dierckx, W. Leurs, N. Boucart, and W. Moll, Using rigid connections in experimental modal synthesis : implementation and validation, IMAC XVII, pp.1440-1444, 1999.

S. W. Doebling, Measurement of structural flexibility matrices for experiments with incomplete reciprocity, 1995.

S. W. Doebling and L. D. Peterson, COMPUTING STATICALLY COMPLETE FLEXIBILITY FROM DYNAMICALLY MEASURED FLEXIBILITY, Journal of Sound and Vibration, vol.205, issue.5, pp.631-645, 1997.
DOI : 10.1006/jsvi.1997.1050

S. W. Doebling, L. D. Peterson, and K. F. Alvin, Measurement of static flexibility matrices for experiments with imcomplete reciprocity, 36th AIAA/ ASME/ ASCE/ AHS/ ASC Structures, Structural Dynamics and Materials Conference, 1995.

S. W. Doebling, L. D. Peterson, and K. F. Alvin, Estimation of reciprocal residual flexibility from experimental modal data, AIAA Journal, vol.34, issue.8, pp.1678-1685, 1996.
DOI : 10.2514/3.13289

S. W. Doebling, L. D. Peterson, and K. F. Alvin, Experimental Determination of Local Structural Stiffness by Disassembly of Measured Flexibility Matrices, Journal of Vibration and Acoustics, vol.120, issue.4, pp.949-957, 1998.
DOI : 10.1115/1.2893925

K. B. Elliot and L. D. Mitchell, The effect of modal truncation on modal modification, IMAC V, pp.72-78, 1987.

K. B. Elliot and L. D. Mitchell, Structural modification using beam elements, IMAC V, vol.2, pp.956-965, 1987.

D. J. Ewins, Modal testing : theory, practice and application, 2000.
DOI : 10.1115/1.3269294

C. Farhat and M. Géradin, A hybrid formulation of a component mode synthesis method, 33rd Structures, Structural Dynamics and Materials Conference, pp.1783-1796, 1992.
DOI : 10.2514/6.1992-2383

C. Farhat and F. X. Roux, Implicit parallel processing in structural mechanics, Computational Mechanics Advances, 1994.

R. Fox and M. Kapoor, Rates of change of eigenvalues and eigenvectors., AIAA Journal, vol.6, issue.12, pp.2426-2429, 1968.
DOI : 10.2514/3.5008

M. Geradin and D. Rixen, Théorie des vibrations -Application à la dynamique des structures, 1996.

P. Guillaume, R. Pintelon, and J. Schoukens, Parametric identification of multivariable systems in the frequency domain : a survey, ISMA, pp.1069-1080, 1996.

P. Guillaume, P. Verboven, and S. Vanlanduit, Frequency domain maximum likelyhood estimation of modal parameters with confidence intervals, ISMA, 1998.

B. Dhia, H. , and E. Balmès, Mesure de compatibilité et application aux problèmes de sousstructuration, Colloque National en Calcul des Structures, 2003.

G. T. Herman, Image Reconstruction from Projections, 1980.
DOI : 10.1006/rtim.1995.1002

L. Hermans and M. Brughmans, Enabling vibro-acoustic optimization in a superelement environment : a case study, IMAC XVII, pp.1146-1152, 1999.

L. Hermans, P. Mas, W. Leurs, and N. Boucart, Estimation and use of residual modes in modal coupling calculations : a case study, IMAC XVII, pp.930-936, 1999.

W. Heylen, S. Lammens, and P. Sas, Modal Analysis Theory and Testing, 1997.

W. C. Hurty, Dynamic analysis of structural systems using component modes, AIAA Journal, vol.3, issue.4, pp.678-685, 1965.
DOI : 10.2514/3.2947

D. Kammer, Test-analysis model development using an exact model reduction Journal of analytical and experimental modal analysis, pp.174-179, 1987.

G. Kergoulay, E. Balmès, and D. Clouteau, Model reduction for efficient fem/bem coupling, 2000.

R. R. Lin, A. B. Palazzolo, R. M. Alexander, and C. H. Gerhold, Beam modifications of structural systems utilizing the receptance approach with static flexibility, IMAC V, vol.2, pp.1557-1564, 1987.

J. Lipkens and J. Leuridan, The use of standart modification package based on real modes. ISMA, 1985.

W. Liu, Structural dynamic analysis and testing of coupled structures, 2000.

N. Maia and J. Silva, Theoretical and experimental modal analysis, 1997.

N. M. Maia, J. M. Silva, and A. M. Ribeiro, Some applications of coupling/uncoupling techniques in structural dynamics. part 2 : Generation of the whole frf matrix from measurements on a single column -the mass uncoupling method, IMAC XV, pp.1440-1452, 1997.

N. M. Maia, J. M. Silva, and A. M. Ribeiro, Some applications of coupling/uncoupling techniques in structural dynamics. part 3 : Estimation of rotational frequency response functions using mum (mass uncoupling method), IMAC XV, pp.1453-1462, 1997.

F. Mastrodi, Identification and damage detection using frf experimental data with applications to a wing structure, ISMA, 2000.

S. Meyer, M. Weyland, and M. Link, Modelling and updating of local stiffness and damping non-linearities using frequency response and mode indicator residuals, ISMA, 2000.

M. Mitchell-dignan and G. C. Pardoen, The estimation of rotational degrees of freedom using shape functions, IMAC VI, pp.566-571, 1988.

J. C. O-'callahan, P. Avitabile, and R. Riemer, System equivalent reduction expansion process (serep) IMAC VII, pp.29-37, 1989.

J. C. O-'callahan, I. W. Lieu, and C. M. Chou, Determination of rotational degrees of freedom for moment transfers in structural modifications, IMAC III, pp.465-470, 1985.

N. Okubo and T. Matsuzaki, Determination of residual flexibility and its effective use in structural modification, IMAC VII, pp.578-583, 1989.

Y. H. Park and Y. S. Park, STRUCTURE OPTIMIZATION TO ENHANCE ITS NATURAL FREQUENCIES BASED ON MEASURED FREQUENCY RESPONSE FUNCTIONS, Journal of Sound and Vibration, vol.229, issue.5, pp.1235-1255, 2000.
DOI : 10.1006/jsvi.1999.2591

L. Paulhiac, Parallon tm 75 : Study of generator cover design modifications, 2000.

F. Piergentili, P. Avitabile, and J. O. Callahan, Dynamic expansion of frequency response functions, IMAC XVII, 1999.

Z. Q. Qu and R. P. Selvam, HYBRID EXPANSION METHOD FOR FREQUENCY RESPONSES AND THEIR SENSITIVITIES, PART II: VISCOUSLY DAMPED SYSTEMS, Journal of Sound and Vibration, vol.238, issue.3, pp.369-388, 2000.
DOI : 10.1006/jsvi.2000.3085

I. E. Rivin and W. D. Ambrogio, Enhancement of dynamic quality of a machine tool using frequency response optimization method, Mechanical Systems and Signal Processing, pp.495-514, 1990.

T. Roscher, R. J. Allemenag, and A. W. Phillips, A new detection method for structural nonlinearities, 2000.

S. Rubin, Improved Component-Mode Representation for Structural Dynamic Analysis, AIAA Journal, vol.13, issue.8, pp.995-1006, 1975.
DOI : 10.2514/3.60497

P. Salvini and A. Sestieri, Predicting the new frequency response function of a structure when adding constraints, The International Journal of Analytical and Experimental Modal Analysis, vol.8, pp.55-62, 1993.

B. J. Schwarz and M. H. Richardson, Structural modifications using higher order elements, IMAC XV, pp.313-318, 1997.

A. Sestieri and W. D. Ambrogio, A modification method for vibration control of structures, Mechanical Systems and Signal Processing, vol.3, issue.3, pp.229-253, 1989.
DOI : 10.1016/0888-3270(89)90051-4

G. W. Skingle, Structural dynamic modification using experimental data, 1989.

R. C. Sohaney and D. Bonnecasse, Residual mobolities and structural dynamic modifications. IMAC VII, pp.568-574, 1989.

M. Tomizuka, A. Abbari, and R. Horowitz, Modeling and identification for mechanical systems with non linearities, IFAC, vol.1, pp.845-850, 1985.

S. C. Ulm, Investigation into the effective use of structural modification, IMAC IV, pp.1279-1286, 1986.

J. Wang, W. Heylen, and P. Sas, Accuracy of structural modification techniques, IMAC V, vol.1, pp.65-71, 1987.

K. C. Yap and D. C. Zimmerman, A comparison of structural dynamic modification and sensitivity method approximation, IMAC, pp.1409-1415, 1998.

Q. Zhang and W. Wang, Prediction of mass modification for desired natural frequencies, IMAC, pp.1026-1032, 1988.