E. Hug, Etude des dégradations des propriétés magnétiques d'alliages Fe-3%Si avec les déformations plastiques. Application à la mise en oeuvre des tôles utilisées dans la conception des moteurs électriques, Thèse de doctorat, 1993.

O. Hubert, Influence des contraintes internes et de la structure des dislocations sur les couplages magnétomécaniques dans les alliages Fe-3%Si à grains non-orientés, Thèse de doctorat, 1998.

E. Hug, O. Hubert, and M. Clavel, Some aspects of the magnetomechanical coupling in the strengthening of nonoriented and grain-oriented 3% SiFe alloys, IEEE Transactions on Magnetics, vol.33, issue.1, p.763, 1997.
DOI : 10.1109/20.560110

E. Hug, O. Hubert, and I. Guillot, Effect of strengthening on the magnetic behaviour of ordered intermetallic 2% V???CoFe alloys, Journal of Magnetism and Magnetic Materials, vol.215, issue.216, pp.215-216, 2000.
DOI : 10.1016/S0304-8853(00)00115-3

E. Hug, Evolution of the magnetic domain structure of oriented 3% SiFe sheets with plastic strains, Journal of Materials Science, vol.4, issue.2, p.4417, 1995.
DOI : 10.1007/BF00361526

O. Hubert, M. Clavel, I. Guillot, and E. Hug, Magnetism and internal stresses : Concept of magneto-plastic anisotropy, Le Journal de Physique IV, vol.09, issue.PR9, p.207, 1999.
DOI : 10.1051/jp4:1999921

E. Hug, O. Hubert, and J. J. Van-houtte, Effect of internal stresses on the magnetic properties of non-oriented Fe???3wt.% Si and (Fe,Co)???2wt.% V alloys, Materials Science and Engineering: A, vol.332, issue.1-2, p.193, 2002.
DOI : 10.1016/S0921-5093(01)01722-1

P. W. Neurath, Effect of plastic and elastic stresses on the losses and the domain configurations of grain-oriented 3 pct Si-Fe, Journal of Metals, p.1319, 1956.

A. Ferro and G. Fratucello, On the effect of strain on the coercive force of some Fe-Ni alloys under tensile stress, IEEE Transactions on Magnetics, vol.7, issue.2, p.230, 1971.
DOI : 10.1109/TMAG.1971.1067037

S. I. Tiitto, Influence of elastic and plastic strain on the magnetization process in Fe - 3.5 % Si, IEEE Transactions on Magnetics, vol.12, issue.6, pp.12-855, 1976.
DOI : 10.1109/TMAG.1976.1059121

C. G. Gardner, G. A. Matzkanin, and J. Lankford, Influence of stress and plastic deformation on the Barkhausen effect in silicon-iron, International Advances in Nondestructive Testing, p.201, 1977.

A. Vannes, E. Cousinou, and C. Flambard, Le bruit ferromagnétique : méthode non-destructive d'analyse des courbes de traction du nickel, p.61, 1984.

J. M. Makar and B. K. Tanner, The effect of stresses approaching and exceeding the yield point on the magnetic properties of high strength pearlitic steels, NDT & E International, vol.31, issue.2, p.117, 1998.
DOI : 10.1016/S0963-8695(97)00008-X

J. M. Makar and B. K. Tanner, The in situ measurement of the effect of plastic deformation on the magnetic properties of steel, Journal of Magnetism and Magnetic Materials, vol.184, issue.2, p.193, 1998.
DOI : 10.1016/S0304-8853(97)01129-3

J. M. Makar and B. K. Tanner, The in situ measurement of the effect of plastic deformation on the magnetic properties of steel, Journal of Magnetism and Magnetic Materials, vol.187, issue.3, p.353, 1998.
DOI : 10.1016/S0304-8853(98)00141-3

J. M. Makar and B. K. Tanner, The effect of plastic deformation and residual stress on the permeability and magnetostriction of steels, Journal of Magnetism and Magnetic Materials, vol.222, issue.3, p.291, 2000.
DOI : 10.1016/S0304-8853(00)00558-8

G. Couderchon, Alliages magnétiques doux, p.350

K. Matsumura and B. Fukuda, Recent developments of non-oriented electrical steel sheets, IEEE Transactions on Magnetics, vol.20, issue.5, p.1533, 1984.
DOI : 10.1109/TMAG.1984.1063223

J. Degauque, Les pertes d'énergie dans les ferromagnétiques métalliques doux : origine physique, Mémoires et Etudes Scientifiques Revue de Métallurgie, p.5, 1985.

P. Brissonneau, Non-oriented Si-Fe Sheets, Journal of Magnetism and Magnetic Materials, vol.19, issue.1-3, p.52, 1980.
DOI : 10.1016/0304-8853(80)90552-1

P. Brissonneau, Magnétisme et matériaux magnétiques pour l'électrotechniques, 1997.

T. Kumano, T. Kubota, and N. Takahashi, Texture of primary recrystallization on nonoriented electrical steel sheet with phase transformation, Journal of Materials Engineering and Performance, vol.1, issue.4, p.401, 1995.
DOI : 10.1007/BF02649299

A. Cottrell, An introduction to metallurgy, The Institute of Materials, 1995.

B. Jaoul and C. Crussard, Etude de la plasticité et application aux métaux, 1965.

G. T. Hahn, A model for yielding with special reference to the yield point phenomena of iron and related bcc metals, Acta metallurgica, p.727, 1962.

P. Violan, J. Simon, B. Bouchet, and J. De-fouquet, Contribution à l'étude de la relation de Hall et Petch dans le fer polycristallin, Mémoires et Etudes Scientifiques Revue de Métallurgie, p.37, 1967.

W. E. Carrington and D. Mclean, Slip nuclei in Silicon-Iron, Acta metallurgica, p.493, 1965.

J. A. Venables and C. J. Harland, Electron back-scattering patterns???A new technique for obtaining crystallographic information in the scanning electron microscope, Philosophical Magazine, vol.27, issue.5, p.1193, 1973.
DOI : 10.1088/0022-3735/2/3/305

S. I. Wright, A review of automated orientation imaging microscopy (OIM), Journal of Computer-Assisted Microscopy, vol.5, p.207, 1993.

B. L. Adams, S. I. Wright, and K. Kunze, Orientation imaging: The emergence of a new microscopy, Metallurgical Transactions A, vol.23, issue.4, p.819, 1993.
DOI : 10.1016/0956-7151(92)90413-9

M. Hatherley, An introduction to textures in metals, Institution of Metallurgists, 1979.

X. Feaugas, Contribution à la compréhension des mécanismes de déformation plastique et d'endommagement des matériaux : un point de vue expérimental, Mémoire d'habilitation à diriger des recherches, 1999.

G. Maeder and J. Lebrun, Contraintes résiduelles et mise en forme, Ecole d'été d'Oléron, Matériaux, mise en forme, pièces formées, 1987.

G. Maeder, J. Lebrun, and J. Sprauel, Détermination par diffraction des rayons X des contraintes internes. Aspects macro et microscopiques, Ecole d'été d'Oléron, Physique et mécanique de la mise en forme des matériaux, 1990.

R. Lopes, L. C. Charlier, and J. , Effect of grain size and intergranular stresses on the cyclic behaviour of a ferritic steel, Materials Science and Engineering, pp.169-67, 1993.

X. Feaugas, On the origin of the tensile flow stress in the stainless steel AISI 316L at 300 K: back stress and effective stress, Acta Materialia, vol.47, issue.13, p.3617, 1999.
DOI : 10.1016/S1359-6454(99)00222-0

H. Haddou, C. Gaudin, and X. Feaugas, Stacking fault energy (s.f.e.) and grain size effects (d) on the tensile behaviour of f.c.c. polycristalline alloys at 300K :Back stress and effective stress evolutions, Journal de Physique IV France, vol.11, pp.4-283, 2001.

H. Mughrabi, Dislocation wall and cell structures and long-range internal stresses in deformed metal crystals, Acta Metallurgica, vol.31, issue.9, p.1367, 1983.
DOI : 10.1016/0001-6160(83)90007-X

F. R. Nabarro, Work hardening and dynamical recovery of F.C.C. metals in multiple glide, Acta Metallurgica, vol.37, issue.6, p.1521, 1989.
DOI : 10.1016/0001-6160(89)90122-3

Y. Estrin, L. S. Toth, A. Molinari, and Y. Bréchet, A dislocation-based model for all hardening stages in large strain deformation, Acta Materialia, vol.46, issue.15, p.5509, 1998.
DOI : 10.1016/S1359-6454(98)00196-7

A. Cottrell, Dislocations and Plastic Flow in Crystals, American Journal of Physics, vol.22, issue.4, 1953.
DOI : 10.1119/1.1933704

D. Kuhlmann-wilsdorf and C. Laird, Dislocation behaviour in fatigue, Materials Science and Engineering, part. II et IV, vol.37, issue.39, pp.111-231, 1979.

I. Dickson, L. Handfield, and G. L-'esperance, Cyclic softening and thermally activated deformation of titanium and zirconium, Material Science and Engineering, p.3, 1983.
DOI : 10.1016/0025-5416(83)90190-8

I. Dickson, J. Boutin, and L. Handfield, A comparison of two simple methods for measuring cyclic internal and effective stresses, Materials Science and Engineering, vol.64, issue.1, p.7, 1984.
DOI : 10.1016/0025-5416(84)90083-1

L. Handfield, I. Dickson, and G. L-'esperance, A Comparison of the Cyclic Deformation Behaviour of Two Purities of Zirconium, 1985.
DOI : 10.1016/B978-0-08-031642-0.50066-0

G. Arnold, O. Hubert, and P. Billardon, Identification inverse du comportement élasto-plastique des toles minces à l'aide d'une machine d'essais de flexion pure, p.283, 2001.

G. Arnold, O. Hubert, and P. Billardon, Identification of kinematic and isotropic hardening using a pure bending test machine, Matériaux magnétiques: Méthodes de mesure des caractéristiques magnétiques des tôles et feuillards magnétiques à l'aide de l'essai sur tôle unique, International Electrotechnical Commission, 1992.

T. Belgrand, Measurement of grain oriented electrical steel properties using IEC 404-3 standard, Le Journal de Physique IV, vol.08, issue.PR2, p.737, 1998.
DOI : 10.1051/jp4:19982172

R. S. Girgis, The single sheet tester. Its acceptance, reproducibility, and application issues on grain-oriented steel, Le Journal de Physique IV, vol.08, issue.PR2, p.729, 1998.
DOI : 10.1051/jp4:19982170

K. Matsubara, T. Nakata, N. Takahashi, K. Fujiwara, and M. Nakano, Effects of the overhang of a specimen on the accuracy of a single sheet tester, Physica Scripta, vol.40, issue.4, pp.529-531, 1989.
DOI : 10.1088/0031-8949/40/4/019

T. Nakata, Y. Ishihara, N. Takahashi, and Y. Kawase, Analysis of magnetic fields in a single sheet tester using an H coil, Journal of Magnetism and Magnetic Materials, vol.26, issue.1-3, p.179, 1982.
DOI : 10.1016/0304-8853(82)90146-9

T. Nakata, N. Takahashi, Y. Kawase, M. Nakano, M. Miura et al., Numerical analysis and experimental study of the error of magnetic field strength measurement with SST, IEEE Transactions on Magnetics, pp.22-400, 1986.

T. Nakata, Y. Kawase, and M. Nakano, Accuracy of magnetic Field Strength Measurement by Single Sheet Testers, Electrical Engineering in Japan, vol.107, p.565, 1987.

T. Nakata, Y. Kawase, and M. Nakano, Improvement of measuring accuracy of magnetic field strength in single sheet testers by using two H coils, IEEE Transactions on Magnetics, vol.23, issue.5, pp.23-2596, 1987.
DOI : 10.1109/TMAG.1987.1065607

T. Nakata, N. Takahashi, K. Fujiwara, M. Nakano, and T. Kayada, Effects of eddy currents in the specimen in a single sheet tester on measurement errors, IEEE Transactions on Magnetics, vol.26, issue.5, p.1641, 1990.
DOI : 10.1109/20.104474

T. Nakata, K. Fujiwara, and M. Nakano, Influence of Yoke Construction on Magnetic Characteristics of Single Sheet Testers, IEEE Translation Journal on Magnetics in Japan, vol.5, issue.7, p.618, 1990.
DOI : 10.1109/TJMJ.1990.4564151

T. Nakata, Y. Ishihara, M. Nakaji, and T. Todaka, Comparison between the H-coil method and the magnetizing current method for the single sheet tester, Journal of Magnetism and Magnetic Materials, vol.215, issue.216, pp.215-216, 2000.
DOI : 10.1016/S0304-8853(00)00239-0

M. Mikulec, Accuracy of single sheet testers, Journal of Magnetism and Magnetic Materials, vol.112, issue.1-3, p.112, 1992.
DOI : 10.1016/0304-8853(92)91127-F

H. Pfutzner and P. Schonhuber, On the problem of the field detection for single sheet testers, IEEE Transactions on Magnetics, vol.27, issue.2, p.778, 1991.
DOI : 10.1109/20.133291

A. J. Moses, Recent Advances in Experimental Methods for the Investigation of Silicon Iron, Physica Scripta, vol.24, p.49, 1988.
DOI : 10.1088/0031-8949/1988/T24/007

J. D. Sievert, Determination of AC magnetic power loss of electrical steel sheet: Present status and trends, IEEE Transactions on Magnetics, vol.20, issue.5, p.1702, 1984.
DOI : 10.1109/TMAG.1984.1063278

J. D. Sievert, The measurement of magnetic properties of electrical sheet steel ??? survey on methods and situation of standards, Journal of Magnetism and Magnetic Materials, vol.215, issue.216, pp.215-216, 2000.
DOI : 10.1016/S0304-8853(00)00251-1

E. Hug and V. Iordache, Evolution des propri??t??s magn??tiques d???alliages ferromagn??tiques doux en cours de plasticit??, Revue internationale de g??nie ??lectrique, vol.5, issue.2, p.371, 2002.
DOI : 10.3166/rige.5.371-381

V. Iordache, F. Ossart, and E. Hug, Magnetic characterisation of elastically and plastically tensile strained non-oriented Fe???3.2%Si steel, Journal of Magnetism and Magnetic Materials, vol.254, issue.255, pp.254-255, 2003.
DOI : 10.1016/S0304-8853(02)00748-5

V. Iordache, E. Hug, and N. Buiron, Magnetic behaviour versus tensile deformation mechanisms in a non-oriented Fe-(3wt.%)Si steel

M. J. Sablik and B. Augustyniak, The effect of mechanical stress on a Barkhausen noise signal integrated across a cycle of ramped magnetic field, Journal of Applied Physics, vol.79, issue.2, p.963, 1996.
DOI : 10.1063/1.360880

M. Delage, Contribution à l'étude du comportement magnétomécanique des tôles Fe-Si à grains non orientés, Thèse de doctorat, 1997.

K. W. Th, L. Clapham, and D. L. Atherton, Characterization of the magnetic easy axis in pipeline steel using magnetic Barkhausen noise, Journal of Applied Physics, vol.75, p.7983, 1994.

A. Cameron, Basic Lubrication Theory, 1971.

L. Cachan, Etude GIRTOM n°1, Caractérisation du comportement magnétomécanique couplé des tôles magnétiques, Rapport final, 1999.

G. Bertotti, F. Fiorillo, P. Mazzeti, and G. P. Soardo, Statistical models of losses in soft magnetic materials, Journal of Magnetism and Magnetic Materials, vol.46, issue.1-2, p.68, 1984.
DOI : 10.1016/0304-8853(84)90341-X

J. Degauque, Soft magnetic materials: microstructure and properties, Solid State Phenomena, pp.35-36, 1994.

M. Dabrowski and T. Zgodzinski, Some effects of unidirectional stress in Si-Fe sheets, Physica Scripta, vol.40, issue.4, p.514, 1989.
DOI : 10.1088/0031-8949/40/4/015

K. Kashiwaya, Magnetic methods », dans Handbook of measurement of residual stresses, 1996.

K. W. Th, L. Clapham, A. Pattantyus, and D. L. Atherton, Investigation of the stresdependent magnetic easy axix in steel using magnetic Barkhausen noise, Journal of Applied Physics, vol.79, p.4242, 1996.

B. D. Cullity, Introduction to magnetic materials, 1972.
DOI : 10.1002/9780470386323

A. J. Moses and D. Davies, Influence of compressive stress on magnetic properties of commercial (110)[001] oriented silicon-iron, IEEE Transactions on Magnetics, pp.16-454, 1980.

G. H. Shirkoohi and A. J. Moses, Effects of stress on iron loss and apparent power in low silicon non-oriented electrical steel, Anales de fisica-B, vol.86, p.265, 1990.

K. Kashiwaya, Fundamentals of Nondestructive Measurement of Biaxial Stress in Steel Utilizing Magnetoelastic Effect under Low Magnetic Field, Japanese Journal of Applied Physics, vol.30, issue.Part 1, No. 11A, p.2932, 1991.
DOI : 10.1143/JJAP.30.2932

K. Kashiwaya, Magnetoelastic Effect of 3.25%Si-Fe Single Crystal under Low Magnetic Field, Japanese Journal of Applied Physics, vol.31, issue.Part 1, No. 2A, p.237, 1992.
DOI : 10.1143/JJAP.31.237

M. Delage, R. Cl, and J. F. Rialland, Analysis of the magnetomechanical behaviour of non-oriented ferromagnetic sheets, Journal de Physique IV France, vol.8, p.583, 1998.

C. Gourdin, Identification et modélisation du comportement électro-magnéto-élastique de structures ferromagnétiques, Thèse de doctorat, 1998.

M. Lobue, V. Basso, F. Fiorillo, and G. Bertotti, Effect of tensile and compressive stress on dynamic loop shapes and power losses of Fe???Si electrical steels, Journal of Magnetism and Magnetic Materials, vol.196, issue.197, pp.196-197, 1999.
DOI : 10.1016/S0304-8853(98)00754-9

M. Lobue, C. Sasso, V. Basso, F. Fiorillo, and G. Bertotti, Power losses and magnetization process in Fe???Si non-oriented steels under tensile and compressive stress, Journal of Magnetism and Magnetic Materials, vol.215, issue.216, pp.215-216, 2000.
DOI : 10.1016/S0304-8853(00)00092-5

J. W. Shilling and . G. Houze-jr, Magnetic properties and domain structure in grain-oriented 3% Si-Fe, IEEE Transactions on Magnetics, vol.10, issue.2, p.195, 1974.
DOI : 10.1109/TMAG.1974.1058317

P. Allia, A. Ferro, G. P. Soardo, and F. Vinai, Magnetostriction behavior in isotropic and cube-on-face 3% SiFe laminations, Journal of Applied Physics, vol.50, issue.B11, p.7716, 1979.
DOI : 10.1063/1.326797

D. Jiles, Introduction to magnetism and magnetic materials, 1991.
DOI : 10.1007/978-1-4615-3868-4

D. W. Shin, J. Degauque, and B. Astie, Magnetomechanical behavior of pure Fe, Ni and, Journal of Magnetism and Magnetic Materials, pp.49-49, 2000.

N. Buiron, Modélisation multiéchelle du comportement magnéto-élastique couplé des matériaux ferromagnétiques doux, Thèse de doctorat, 2000.

R. L. Pasley, Barkhausen effect ? an indication of stress, Materials Evaluation, issue.28, p.157, 1970.

M. Kléman, Barkhausen jumps in soft magnetic materials at low fields, Journal de Physique, vol.42, issue.9, p.1263, 1981.
DOI : 10.1051/jphys:019810042090126300

K. W. Th, L. Clapham, and D. L. Atherton, Characterization of the magnetic easy axis in pipeline steel using magnetic Barkhausen noise, Journal of Applied Physics, vol.75, p.7983, 1994.

W. A. Theiner, Micromagnetic techniques, in Structural and residual stress analysis by non destructive methods, p.564, 1997.

C. ?tef?ni?, D. L. Atherton, and L. Clapham, Plastic versus elastic deformation effects on magnetic Barkhausen noise in steel, Acta Materialia, vol.48, issue.13, p.3545, 2000.
DOI : 10.1016/S1359-6454(00)00134-8

A. Seeger, H. Kronmüler, H. Rieger, and H. Träuble, Effect of Lattice Defects on the Magnetization Curve of Ferromagnets, Journal of Applied Physics, vol.35, issue.3, p.740, 1964.
DOI : 10.1063/1.1713460

H. Kronmüler, Statistical theory of Rayleigh's law, Zeitschrift fur Angewandte Physik, p.9, 1970.

R. Labusch, Calculation of the critical field gradient in type II superconductors, p.1, 1969.

B. Astie, J. Degauque, J. Porteseil, and R. Vergne, Influence of the dislocation structures on the magnetic and magnetomechanical properties of high-purity iron, IEEE Transactions on Magnetics, vol.17, issue.6, p.2929, 1981.
DOI : 10.1109/TMAG.1981.1061496

F. Vicena, On the influence of dislocations on the coercive force of ferromagnetics, Czech, J. Phys, vol.5, p.480, 1955.

J. Miltat and M. Kléman, Interaction of moving {110} 90?? walls in Fe-Si single crystals with lattice imperfections, Journal of Applied Physics, vol.50, issue.B11, p.7695, 1979.
DOI : 10.1063/1.326843

S. M. Thompson and B. K. Tanner, The magnetic properties of specially prepared pearlitic steels of varying carbon content as a function of plastic deformation, Journal of Magnetism and Magnetic Materials, vol.132, issue.1-3, p.71, 1994.
DOI : 10.1016/0304-8853(94)90302-6

J. W. Pang, T. M. Holden, and T. E. Mason, The development of intergranular strains in a high-strength steel, The Journal of Strain Analysis for Engineering Design, vol.3, issue.5, p.373, 1998.
DOI : 10.1243/0309324981513075

X. Feaugas and C. Gaudin, Different levels of plastic strain incompatibility during cyclic loading: in terms of dislocation density and distribution, Materials Science and Engineering: A, vol.309, issue.310, pp.310-382, 2001.
DOI : 10.1016/S0921-5093(00)01730-5

C. Gatelier-rothea, J. Chicois, R. Fougeres, and P. Fleischmann, Characterization of pure iron and (130p.p.m.) carbon???iron binary alloy by Barkhausen noise measurements: study of the influence of stress and microstructure, Acta Materialia, vol.46, issue.14, p.4873, 1998.
DOI : 10.1016/S1359-6454(98)00205-5

J. Catty, Etude des relations entre la microstructure, l'état de contrainte d'une part, les propriétés magnétiques et magnétostrictives d'autre part, 1995.

E. Du-trémolet-de-lacheisserie, La magn??tostriction du nickel, Journal de Physique, vol.27, issue.9-10, p.555, 1966.
DOI : 10.1051/jphys:01966002709-10055500

H. Haddou, Influence de la taille de grain et de l'énergie de défaut d'empilement sur l'état de contraintes internes développé au cours de la déformation plastique en traction simple et en fatigue oligocyclique (alliages CFC, Thèse de doctorat, 2003.

E. Hug, V. Iordache, and N. Buiron, New perspectives for magnetomechanical coupling in high-purity nickel, IEEE Transactions on Magnetics, vol.38, issue.5, p.2820, 2002.
DOI : 10.1109/TMAG.2002.803569

C. ?tef?ni?, L. Clapham, and D. L. Atherton, Subtle changes in magnetic Barkhausen noise before the macroscopic elastic limit, Journal of Materials Science, vol.35, issue.11, p.2675, 2000.
DOI : 10.1023/A:1004741606713

S. Vaidyanathan, V. Moorthy, P. Kalyanasundaram, and T. Jayakumar, Effect of different stages of tensile deformation on micromagnetic parameters in high-strength, low-alloy steel, Metallurgical and Materials Transactions A, vol.35, issue.5, p.2067, 1999.
DOI : 10.1007/s11661-999-0017-9

V. Moothy, S. Vaidyanathan, T. Jayakumar, . Baldev-raj, and B. P. Kashyap, Effect of tensile deformation on micromagnetic parameters in 0.2% carbon steel and 2.25Cr???1Mo steel, 2% carbon steel and 2.25Cr-1Mo steel, p.1869, 1999.
DOI : 10.1016/S1359-6454(99)00048-8

R. Langman, Measurement of the mechanical stress in mild steel by means of rotation of magnetic field strength, NDT International, vol.14, issue.5, p.255, 1981.
DOI : 10.1016/0308-9126(81)90078-X

R. Langman, Measurement of the mechanical stress in mild steel by means of rotation of magnetic field strength -part2: biaxial stress, NDT International, p.91, 1982.

R. Langman, Measurements of the mechanical stress in mild steel by means of rotation of magnetic field strength ???part 3: practical applications, NDT International, vol.16, issue.2, p.59, 1983.
DOI : 10.1016/0308-9126(83)90110-4

V. Iordache, E. Hug, E. Buiron, and . Metz, Caractérisation des contraintes mécaniques appliquées et résiduelles par des méthodes électromagnétiques. Bruit Barkhausen et hystérésis magnétique, Magnetostriction. Theory and applications of magnetoelasticity, 1993.

T. Barradi and I. B. Puchalska, Micromagnetism of domain walls in 3% Si-Fe sheets, Anales de fisica, serie B, vol.86, p.217, 1990.

J. Degauque, Magn??tisme et mat??riaux magn??tiques : introduction, Le Journal de Physique IV, vol.02, issue.C3, p.1, 1992.
DOI : 10.1051/jp4:1992301

J. Degauque and A. Et-lebouc, Matériaux magnétiques doux, dans Matériaux à propriétés spécifiques. Les matériaux magnétiques

G. Couderchon, Alliages fer-nickel et fer-cobalt, Techniques de l'Ingénieur, traité Génie électrique, p.130

D. W. Clegg and R. A. Buckley, The Disorder ??? Order Transformation in Iron???Cobalt-Based Alloys, Metal Science Journal, vol.3, issue.1, p.48, 1973.
DOI : 10.1016/0001-6160(59)90076-8

E. Hug, . Annexes-annexe-a, . Ferromagnetisme, . L. Notions-generales-annexe-b, and . Feco, Etude expérimentale des couplages magnétomécaniques dans les matériaux ferromagnétiques doux, Mémoire d'Habilitation à Diriger des Recherches, p.2, 2003.

A. C. Complements, . De, . Experimentale-annexe, . Ferromagnetisme, and . Notions, 1. Eléments de magnétostatique A.2. Bilan énergétique A.2.1

A. , C. De, and . Experimentale-c, Mesures magnétiques lors d'un essai de traction uniaxiale, B.1. Généralités sur les alliages FeCo B.2. Présentation du matériau B.3. Comportement mécanique B.4