R. P. Feynman and ]. E. Peterson, There's plenty of room at the bottom (Transcription d'une allocution donnée par R. P. Feynman), décembre 1959 Le génial professeur Feynman Silicon as a mechanical material, Proc. IEEE, pp.420-457, 1982.

J. W. Gardner and R. T. Howe, Celebration of the tenth transducers Conference: the past, present and future of transducer research and development Surface micromachining for microsensors and microactuators Kovacs and al. Bulk micromachining of silicon, Proc. IEEE Microelectromechanical systems (MEMS): fabrication, design and applications . Smart Materials and Structures, pp.2-23, 1988.

S. T. Walsh, R. Payne, and M. Mcnie, Choosing between integrated and hybrid microsystems, Micromachine Devices, 2001.

. Nexus, Market analysis for microsystems, 2002.

J. D. Turner and L. Austin, Sensors for automotive telematics, Measurement Science and Technology, vol.11, issue.2, pp.58-79, 2000.
DOI : 10.1088/0957-0233/11/2/202

A. Carullo and M. Parvis, An ultrasonic sensor for distance measurement in automotive applications, IEEE Sensors Journal, vol.1, issue.2, pp.143-147, 2001.
DOI : 10.1109/JSEN.2001.936931

F. Pressecq, Electronique spatiale: des composant dédiés aux composants commerciaux, enjeux d une mutation . Colloque de CAO de circuits intégrés et systèmes, pp.64-67, 1999.

J. B. Huang, C. M. Ho, S. Tung, C. Liu, and Y. C. Tai, Micro thermal shear stress sensor with and without cavity underneath, Proceedings of the IEEE Instrumentation/ Measurement Technologies Conference (IMTC/95), pp.171-174, 1995.

F. J. Martin and C. Groove, Microfabricated drug delivery systems : concept to improve clinical Benefit, Biomedical Microdevices, pp.97-108, 2001.

N. J. Nielsen, History of thinkjet printhead development, Hewlett-Packard Journal, vol.36, issue.5, 1985.

A. Mason, N. Yazdi, A. V. Chavan, K. Najafi, and K. D. Wise, A generic multielement microsystem for portable wireless applications, Proceedings of the IEEE, vol.86, issue.8, pp.1733-1747, 1998.
DOI : 10.1109/5.704279

S. Mir, Conception des microsystèmes sur silicium . Encyclopédie technique, Traité EGEM, p.224, 2002.

L. E. Kinsler, A. R. Frey, A. B. Coppens, and J. V. Sanders, Fundamentals of acoustics, 1982.

J. Perdijon, Le contrôle non destructif par ultrasons, Hermès, 1993.

V. Magori, Ultrasonic sensors in air, Proceedings of IEEE Ultrasonics Symposium ULTSYM-94, pp.471-481, 1994.
DOI : 10.1109/ULTSYM.1994.401632

A. Carullo and M. Parvis, An ultrasonic sensor for distance measurement in automotive applications, IEEE Sensors Journal, vol.1, issue.2, 2001.
DOI : 10.1109/JSEN.2001.936931

D. Bank, A novel ultrasonic sensing system for autonomous mobile systems, IEEE Sensors Journal, vol.2, issue.6, 2002.

G. E. Sergent, Applications of acoustics and ultrasonics to marine geologie, Sensors and Actuators A, vol.6, issue.1, pp.23-28, 1968.

P. Rey, P. Charvet, M. T. Delaye, and S. Hassan, A high density capacitive pressure sensor array for fingerprint sensor application, Proceedings of International Solid State Sensors and Actuators Conference (Transducers '97), 1997.
DOI : 10.1109/SENSOR.1997.635738

A. Briggs, Acoustic microscopy, 1992.
URL : https://hal.archives-ouvertes.fr/jpa-00223404

E. Cianci, A. Minotti, V. Foglietti, G. Caliano, and M. Pappalardo, One-dimensional capacitive micromachined ultrasonic transducers arrays for echographic probes, Microelectronic Engineering, vol.73, pp.502-507, 2004.

J. P. Sferruzza, Développement des transducteurs ultrasonores élémentaires en vue de réduire la dimension des générateurs d'ondes de choc, Thése INSERM, 2001.

J. O. Kim, S. Choi, and J. H. Kim, Vibroacoustic characteristics of ultrasonic cleaners, Applied Acoustics, vol.58, issue.2, pp.211-228, 1999.
DOI : 10.1016/S0003-682X(98)00039-5

R. Demirli and J. Saniee, Model-based of ultrasonic echoes, IEEE Tansaction on Ultrasonics Ferroelectrics and Frequency Control, vol.48, issue.3, 2001.

D. Marioli, C. Narduzi, C. Offeli, D. Petri, E. Sardini et al., Digital time-of-flight measurement for ultrasonic sensors, IEEE Trans. on Instru. and Meas, vol.41, issue.1, 1992.

A. Carullo, F. Ferraris, S. Grazziani, U. Grimaldi, and M. Parvis, Ultrasonic distance sensor improvment using a two-level neural network, IEEE Trans. on Instr. and Meas, vol.45, issue.2, 1996.

P. D. Harris, M. K. Andrews, and G. C. Turner, Ultrasonic transmission and reception from bulk-micromachined transducers, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control, vol.48, issue.1, pp.224-231, 2001.
DOI : 10.1109/58.896135

B. T. Khuri-yakub, C. Cheng, F. Degertekin, S. Ergun, S. Hansen et al., Silicon Micromachined Ultrasonic Transducers, Japanese Journal of Applied Physics, vol.39, issue.Part 1, No. 5B, pp.2883-2887, 2000.
DOI : 10.1143/JJAP.39.2883

URL : http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.584.4890

H. Baltes, O. Brand, J. G. Korvink, R. Lenggenhager, and O. Paul, IMEMS-integrated micro electro mechanical systems by VLSI standard and micromachining, 24th European Solid State Device Research Conference, pp.273-280, 1994.

R. A. Noble, A. D. Jones, T. J. Robertson, and D. A. Hutchins, Novel, wide bandwidth, micromachined ultrasonic transducers, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control, vol.48, issue.6, 2001.
DOI : 10.1109/58.971699

A. S. Ergun, B. Temelkuran, E. Ozbay, and A. Atalar, A new detection method for capacitive micromachined ultrasonics transducers, IEEE Trans. Ultrasonics, Ferroelectrics and Frequency Controls, vol.48, pp.1-6, 1996.

O. Oralkan, A. S. Ergun, J. A. Johnson, M. Kuraman, U. Demirci et al., Capacitive micromachined ultrasonic transducers: Next generation arrays for capacitive imaging, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control, vol.49, issue.11, 2002.

X. Jin, I. Ladabaum, and B. T. Khuri-yakub, The microfabrication of capacitive ultrasonic transducers, Proceedings of International Solid State Sensors and Actuators Conference (Transducers '97), 1998.
DOI : 10.1109/SENSOR.1997.613679

P. C. Eccardt and K. Niederer, Micromachined ultrasound transducers whith improved coupling factors from a CMOS compatible process, Ultrasonics, vol.38, 2000.

B. Belgacem, D. Alquier, P. Muralt, J. Baborowski, S. Lucas et al., Optimization of the fabrication of sealed capacitive transducers using surface micromachining, Journal of Micromechanics and Microengineering, vol.14, issue.2, pp.299-304, 2004.
DOI : 10.1088/0960-1317/14/2/019

A. Boyzkurt and I. Labadaum, Theory and analysis of electrode size optimization for capacitive microfabricated ultrasonic transducers, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control, vol.46, issue.6, pp.1364-1374, 1999.
DOI : 10.1109/58.808859

W. H. Hsieh, A high performance MEMS thin-film teflon electret microphone . Transducers 99, 1999.

B. Bayram, E. Haeggstrom, G. G. Yaralioglu, and B. T. Khuri-yakub, A new regime for operating capacitive micromachined ultrasonic transducers, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control, vol.50, issue.9, pp.1184-1190, 2003.
DOI : 10.1109/TUFFC.2003.1235329

J. Baborowski, Micromachining of piezoelectric MEMS . Transducers 01, pp.596-599, 2001.

J. Baborowski, P. Muralt, N. Lederman, and M. Cantoni, Piezoelectric micromachined ultrasonic transducers study of PZT coated membrane structures, Acoustical Imaging, vol.22, 1996.

E. Dieulesaint and D. Royer, Ondes élastiques dans les solides, 1974.

M. A. Dubois and P. Muralt, Stress and piezoelectric properties of aluminum nitride thin films deposited onto metal electrodes by pulsed direct current reactive sputtering, Journal of Applied Physics, vol.89, issue.11, pp.6389-6385, 2001.
DOI : 10.1063/1.1359162

D. De-bruyker, A. Cozma, and R. Puers, A combined piezoresistive/ capacitive pressure sensor whith self-test function based on thermal actuation, Sensors and Actuators A, vol.66, 2000.

O. Brand, Micromachined resonators for ultrasound based proximity sensing, Thèse ETHZ, 1994.

M. Hornung, Micromachined ultrasound based proximity sensors, Thèse ETHZ, 1998.
DOI : 10.1007/978-1-4615-4997-0

C. Kuratli, Realization of silicon based ultrasound micro-systems, Thèse ETHZ, 1999.

J. Lee, Introduction to MEMS . UTD

C. S. Smith, Piezoresistance Effect in Germanium and Silicon, Physical Review, vol.94, issue.1, pp.42-49, 1954.
DOI : 10.1103/PhysRev.94.42

P. J. French and A. G. Evans, Piezoresistance in polysilicon and its applications to strain gauges, Solid-State Electronics, vol.32, issue.1, pp.1-10, 1989.
DOI : 10.1016/0038-1101(89)90041-5

M. Royer, J. O. Holmen, M. A. Wurm, O. S. Aadland, and M. Glenn, ZnO on Si integrated acoustic sensor, Sensors and Actuators, vol.4, pp.357-362, 1983.
DOI : 10.1016/0250-6874(83)85044-6

A. Sprenkels, R. Groothengel, A. Verloop, and P. Bergveld, Development of an electret microphone in silicon, Sensors and Actuators, vol.17, issue.3-4, pp.509-512, 1989.
DOI : 10.1016/0250-6874(89)80038-1

R. Ried, E. Kim, D. Hong, and R. Muller, Piezoelectric microphone with on-chip CMOS circuits, Journal of Microelectromechanical Systems, vol.2, issue.3, pp.111-120, 1993.
DOI : 10.1109/84.260255

A. Kovacs and A. Stoffel, Integrated condenser microphone with polysilicon electrodes, Micromechanics Europe, pp.132-135, 1995.

R. Schellin, M. Pedersen, W. Olthuis, P. Bergveld, and G. Hess, A monolithically integrated silicon microphone with piezoelectric polymers layers , Micromechanics Europe, pp.217-220, 1995.

O. Brand, M. Hornung, H. Batles, and C. Hafner, Ultrasound barrier microsystem for object detection based on micromachined transducer elements, Journal of Microelectromechanical Systems, vol.6, issue.2, 1997.
DOI : 10.1109/84.585793

C. Domingues, S. Mir, and L. Rufer, Design of a MEMS-based ultrasonic pulse-echo system . DCIS, Ciudad Real, pp.623-628, 2003.
URL : https://hal.archives-ouvertes.fr/hal-01376263

S. Mir, Conception des microsystèmes sur silicium . Encyclopédie technique, Hermès Sciences Publications, p.224, 2002.

A. Mason, N. Yazdi, and A. V. Chavan, A generic multielement microsystem for portable wireless applications, Proc. IEEE, pp.1733-1745, 1998.
DOI : 10.1109/5.704279

N. Yazdi, A. Mason, and U. Baldenweg, A generic interface chip for capacitive sensors in low-power multi-parameter microsystems, Sensors and Actuators A: Physical, vol.84, issue.3, pp.351-361, 1999.
DOI : 10.1016/S0924-4247(00)00307-1

G. Amendola and C. N. Lo, Signal processing electronics for a capacitive micro-sensor, DTIP 2000 Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS, pp.162-170, 2000.

B. Stefanelli, J. P. Bardyn, A. Kaiser, and D. Billet, A very low-noise CMOS preamplifier for capacitive sensors, IEEE Journal of Solid-State Circuits, vol.28, issue.9, 1993.
DOI : 10.1109/4.236177

Y. Hu, J. L. Solère, D. Lachartre, and R. Turchetta, Design and performance of a low-noise, low-power consumption CMOS charge amplifier for capacitive detectors, IEEE Transactions on Nuclear Science, vol.45, issue.1, pp.119-123, 1998.
DOI : 10.1109/23.659562

K. E. Bean, Anisotropic etching of silicon, IEEE Transactions on Electron Devices, vol.25, issue.10, pp.1185-1192, 1978.
DOI : 10.1109/T-ED.1978.19250

J. M. Paret, Etude et mise au point de la méthodologie de conception et de fabrication collective de MEMS sur silicium, 1997.

H. Seidel, L. Csepregi, A. Heureberg, and H. Baumgartel, Anisotropic Etching of Crystalline Silicon in Alkaline Solutions, Journal of The Electrochemical Society, vol.137, issue.11, pp.3612-3626, 1990.
DOI : 10.1149/1.2086277

K. Sato, Characterization of orientation-dependent etching properties of single-crystal silicon: effects of KOH concentration, Sensors and Actuators A: Physical, vol.64, issue.1, pp.87-93, 1988.
DOI : 10.1016/S0924-4247(97)01658-0

K. R. Williams, Etch rates for micromachining processing-part II, Journal of Microelectromechanical Systems, vol.12, issue.6, pp.761-778, 2003.
DOI : 10.1109/JMEMS.2003.820936

C. Malhaire, Caractérisation et modélisation de micro-transducteur de pression à haute performances intégrées sur silicium, Thèse INSA Lyon, 1998.

A. A. Ayon, R. L. Bayt, and K. S. Breuer, Deep reactive ion etching: a promising technology for micro- and nanosatellites, Smart Materials and Structures, vol.10, issue.6, pp.1135-1144, 2001.
DOI : 10.1088/0964-1726/10/6/302

I. , L. P. French, M. Nagao, and M. Esachi, Electromechanical etch-stop in TMAH without externally applied bias, Sensors and Actuators A, vol.56, pp.279-280, 1996.

C. Kuratli and Q. Huang, A CMOS Ultrasound Range-Finder Microsystem, IEEE Journal of Solid-State Circuits, vol.35, issue.12, 2000.

S. P. Timoshenko and S. Woinowsky-krieger, Theory of plates and shells, p.580, 1959.

R. Schellin, M. Strecker, U. Nothelfer, and G. Shuster, Low pressure acoustic sensors for airbone sound with piezoresistive monocrystalline silicon and electrochemically etched diaphragms, Sensors and Actuators A, pp.46-47, 1995.

X. Chauffleur, G. Blasquez, and P. Pons, Influence of the bonding conditions on the response of capacitive pressure sensors, Sensors and Actuators A: Physical, vol.46, issue.1-3, pp.46-47, 1995.
DOI : 10.1016/0924-4247(94)00873-G

R. D. Blevins, Formulas for Natural Frequency and Mode Shape, Journal of Applied Mechanics, vol.47, issue.2, 1979.
DOI : 10.1115/1.3153712

B. Kloeck and N. F. De-rooij, Semiconducteur sensors, 1994.

E. Bonnotte, P. Delobelle, L. Bornier, B. Trolard, and G. Tribillon, Mise en oeuvre de deux methodes interferometriques pour la carctérisation mécanique des films minces par l essai de gonflement, application au cas du silicium monocristallin, J. Phys. III, issue.5, pp.953-983, 1995.

O. Tabata, Mechanical property measurment of thin films using load-deflection of composite rectangular membranes . Sensors an actuators A, pp.135-141, 1989.

O. Brand, H. Baltes, and U. Baldenweg, Ultrasound-tranducer using membrane resonators realized with bipolar IC technology, IEEE MEMS, vol.99, pp.38-43, 1999.

F. Parrain, B. Charlot, S. Mir, and B. Courtois, Capteur infrarouge CMOS à thermopiles comportant des fonctions de self-test, Nano et micro technologies, vol.1, pp.387-412, 2001.
URL : https://hal.archives-ouvertes.fr/hal-01455450

S. C. Gong, Effects of pressure sensor dimensions on process window of membrane thickness, Sensors and Actuators A: Physical, vol.112, issue.2-3, pp.286-290, 2004.
DOI : 10.1016/j.sna.2004.02.001

T. Gabrielson, Mechanical-thermal noise in micromachined acoustic and vibration sensors, IEEE Transactions on Electron Devices, vol.40, issue.5, pp.903-909, 1993.
DOI : 10.1109/16.210197

J. A. Harley and T. W. Kenny, 1/F noise considerations for the design and process optimization of piezoresistive cantilevers, Journal of Microelectromechanicals Systems, vol.9, issue.2, 2000.

M. Papila and R. T. Haftka, Piezoresistive microphone design Pareto optimization : tradeoff between sensitivity and noise floor, AHS structures, structural dynamics, and materials conference, 2003.
DOI : 10.2514/6.2003-1632

B. Bae, B. R. Flachsbart, K. Park, and M. A. Shannon, Design optimization of a piezoresistive pressure sensor considering the output signal-to-noise ratio, Journal of Micromechanics and Microengineering, vol.14, issue.12, pp.1597-1607, 2004.
DOI : 10.1088/0960-1317/14/12/001

B. T. Khuri-yakub, Silicon Micromachined Ultrasonic Transducers, Japanese Journal of Applied Physics, vol.39, issue.Part 1, No. 5B, pp.2883-2887, 2000.
DOI : 10.1143/JJAP.39.2883

URL : http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.584.4890

Y. Huang, Fabricating capacitive micromachined ultrasonic transducers with wafer-bonding technology, Journal of Microelectromechanical Systems, vol.12, issue.2, pp.128-137, 2003.
DOI : 10.1109/JMEMS.2003.809968

W. J. Wang, R. M. Lin, Q. B. Zou, and X. X. Li, Modeling and characterization of a silicon condenser microphone, Journal of Micromechanics and Microengineering, vol.14, issue.3, pp.403-409, 2004.
DOI : 10.1088/0960-1317/14/3/013

I. Labadaum, X. Jin, H. T. Soh, A. Atalar, and B. T. Khuri-yakub, Surface micromachined capacitive ultrasonic transducers, IEEE Transactions on Ultrasonics, Ferroelectrics, And Frequency Control, vol.45, issue.3, 1998.

M. H. Badi, Capacitive micromachined ultrasonic lamb waves transducers, 2004.

W. P. Mason, Electromechanical Transducers and Wave Filters, D. Van. Nostrand Company, 1942.

A. Harrie and C. Tilman, Equivalent circuit representation of electromechanical transducers: I. Lumped-parameter systems micromechannical, Journal of Micromechanics and Microengeneering, vol.6, pp.157-176, 1995.

A. Caronti, G. Caliano, A. Iula, and M. Pappalardo, An accurate model for capacitive micromachined ultrasonic transducers, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control, vol.49, issue.2, pp.159-168, 2002.
DOI : 10.1109/58.985700

G. G. Yaralioglu and A. S. Ergun, Calculation and measurement of electromechanical coupling coefficient of capacitive micromachined ultrasonic transducers, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control, vol.50, issue.4, pp.449-456, 2003.
DOI : 10.1109/TUFFC.2003.1197968

A. Caronti, R. Carotenuto, and M. Pappalardo, Electromechanical coupling factor of capacitive micromachined ultrasonic transducers, The Journal of the Acoustical Society of America, vol.113, issue.1, pp.279-280, 2003.
DOI : 10.1121/1.1527958

M. Brauer, A. Dehé, M. Fuldner, and A. , Improved signal-to-noise ratio of silicon microphones by a high-impedance resistor, Journal of Micromechanics and Microengineering, vol.14, issue.9, pp.86-89, 2004.
DOI : 10.1088/0960-1317/14/9/015

L. Rufer, C. Domingues, and S. Mir, Behavioural simulation and modeling of a pulse-echo ultrasonic system, DTIP 2002 Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS, 2002.

G. Amendola, G. Lu, and L. Babdjian, Signal-processings electronics for a capacitive micro- Sensor, Analog Integrated Circuits and Signal Processing, vol.29, issue.1/2, pp.105-113, 2001.
DOI : 10.1023/A:1011238515922

N. Yazdi, A. Mason, K. Najafi, and K. D. Wise, A generic interface chip for capacitive sensors in low-power multi-parameter microsystems, Sensors and Actuators A: Physical, vol.84, issue.3, pp.351-361, 2000.
DOI : 10.1016/S0924-4247(00)00307-1

A. Gola, E. Chiesa, E. Lasalandra, F. Pasolini, and M. Tronconi, Interface for MEMS-based rotational accelerometer for HDD applications with 2.5 rad/s/sup 2/ resolution and digital output, IEEE Sensors Journal, vol.3, issue.4, 2003.
DOI : 10.1109/JSEN.2003.815785

K. L. Kraver, M. R. Guthaus, T. D. Strong, P. L. Bird, G. S. Cha et al., A mixed-signal sensor interface microinstrument, Sensors and Actuators A: Physical, vol.91, issue.3, pp.266-277, 2001.
DOI : 10.1016/S0924-4247(01)00596-9

P. Bruschi, D. Navarini, G. Barillaro, and A. Gola, A Precise Capacitance-to-Pulse Width Converter for Integrated Sensors, Analog Integrated Circuits and Signal Processing, vol.41, issue.1, pp.93-97, 2004.
DOI : 10.1023/B:ALOG.0000038288.41566.0f

M. Sawan, R. Chebli, and A. Kassem, Integrated front-end receiver for a portable ultrasonic system, Analog Integrated Circuits and Signal Processing, vol.41, pp.93-97, 2004.

C. C. Guo, P. Schmidt, G. Deptuch, and Y. Hu, A fully integrated, low noise and low power BiCMOS front-end readout system for capacitive detectors . Analog integrated circuits and signal processing, pp.211-213, 2001.
URL : https://hal.archives-ouvertes.fr/in2p3-00012210

A. Mason, N. Yazdi, J. Zhang, and Z. Sainudeen, A modular sensor microsystem utilizing a universal interface circuit, Proceedings of the 2003 International Symposium on Circuits and Systems, 2003. ISCAS '03., 2003.
DOI : 10.1109/ISCAS.2003.1205172

F. L. Van-der-goes and G. C. Meijer, A universal transducer interface for capacitive and resistive sensor elements . Analog integrated circuits and signal processing, pp.249-260, 1997.

R. Gregorian and G. C. Temes, Analog MOS integrated circuits for signal processing, 1986.

S. Mir, L. Rufer, B. Z. Thouraud, and M. Simo, CMOS front-end for capacitive micromachined ultrasonic transducers, 2001.
URL : https://hal.archives-ouvertes.fr/hal-01391603

S. B. Baker and C. Toumazou, Using high frequency operational amplifiers for low noise design, Analog Integrated Circuits and Signal Processing, vol.19, issue.1, pp.47-58, 1999.
DOI : 10.1023/A:1008378332029

B. Stefanelli, J. P. Bardyn, A. Kaiser, and D. Billet, A very low-noise CMOS preamplifier for capacitive sensors, IEEE Journal of Solid-State Circuits, vol.28, issue.9, pp.971-978, 1993.
DOI : 10.1109/4.236177

Y. Hu, J. L. Solère, D. Larchatre, and R. Turchetta, Design and performance of a low-noise, low-power consumption CMOS charge amplifier for capacitive detectors, IEEE Transactions on Nuclear Science, vol.45, issue.1, pp.119-123, 1998.
DOI : 10.1109/23.659562

S. M. Sze, Semiconductor sensors, 1994.

S. Mir, B. Charlot, L. Rufer, F. Parrain, and S. Martinez, Conception des microsystèmes sur silicium . Traité EGEM (électronique, Génie électrique, microsystèmes), p.224, 2002.

M. Hornung, R. Frey, O. Brand, H. Batles, and C. Hafner, Ultrasound barrier based on packaged micromachined membrane resonators, Proceedings IEEE Micro Electro Mechanical Systems. 1995, pp.334-339, 1995.
DOI : 10.1109/MEMSYS.1995.472599

R. Yahaiaoui, S. Petigrand, A. Bosseboeuf, and K. Danaie, Vibrométrie interférométrique continue stroboscopique, application à la caractérisation des modes de vibrations de dispositifs micromécaniques, Nano et Micro Technologies, 2001.

E. Bonnotte, P. Delobelle, L. Bornier, B. Trolard, and G. Tribillon, Mise en oeuvre de deux methodes interferometriques pour la carctérisation mécanique des films minces par l essai de Chapitre V : Transducteur ultrasonore monolithique Cristiano Costa Domingues Conception de transducteurs acoustiques micro-usinés -133 gonflement , application au cas du silicium monocristallin, J. Phys. III, issue.5, pp.953-983, 1995.
DOI : 10.1051/jp3:1995169

R. G. De-anna, S. Roy, C. A. Zorman, and M. Mehregany, Modelling of Sic resonant devices over a broad temperature range, pp.644-647, 1999.

H. Jianqiang, Z. Changchun, L. Junhua, and H. Yongning, Dependence of the resonance frequency of thermally excited microcantilever resonators on temperature, Sensors and Actuators A: Physical, vol.101, issue.1-2, pp.37-41, 2002.
DOI : 10.1016/S0924-4247(02)00146-2

A. Boubakache, P. Pons, G. Blasquez, and Z. Dibi, Characterisation and modelling of the mismatch of TCRs and their effects on the drift of the offset voltage of piezoresistive pressure sensors, Sensors and Actuators A: Physical, vol.84, issue.3, pp.292-296, 2000.
DOI : 10.1016/S0924-4247(00)00406-4

Y. Sun, X. Sun, B. Sun, and Q. Meng, Electric drift of the bridge offset for pressure sensors and its utilization, Sensors and Actuators A: Physical, vol.58, issue.3, pp.249-256, 1997.
DOI : 10.1016/S0924-4247(97)01399-X

J. Gakkestad, P. Ohlckers, and L. Halbo, Effects of process variations in a CMOS circuit for temperature compensation of piezoresistive pressure sensors, Sensors and Actuators A: Physical, vol.48, issue.1, 1995.
DOI : 10.1016/0924-4247(95)00845-4

Y. Takashima, T. Adachi, T. Yoshino, and T. Yamada, A temperature compensation method for piezoresistive sensors, JSAE Review, vol.18, issue.3, 1997.
DOI : 10.1016/S0389-4304(97)00023-4

D. Chen, D. Cui, Z. Cui, and S. Xia, A new temperature compensation scheme for a silicon nitride beam resonnant pressure sensor, 2004.

V. Stankevic and C. Simkevicius, Application of aluminum films as temperature sensors for the compensation of output thermal shift of silicon piezoresistive pressure sensors, Sensors and Actuators A: Physical, vol.71, issue.3, pp.161-166, 1998.
DOI : 10.1016/S0924-4247(98)00178-2

C. Kuratli and Q. Huang, A CMOS ultrasound range-finder microsystem, IEEE Journal of Solid- State Circuits, vol.35, issue.12, 2000.

H. Jerominek, M. Renaud, N. R. Swart, F. Picard, T. Pope et al., Micromachined VO2-based uncooled IR bolometer detector arrays with integrated CMOS readout electronics, SPIE, vol.2280, pp.111-121, 1996.

S. M. Sze, Semiconductors sensors, 1995.

D. Veychard, Conception et realisation d un convertisseur electrothermique à grande constante de temps en technologie microsystème pour un disjoncteur thermique, Thèse INPG, TIMA, 1999.

A. W. Herwaarden, D. C. Duyn, V. Oudheusden, and E. P. Sarro, Integrated thermopile sensors, Sensors and Actuators A: Physical, vol.22, issue.1-3, pp.21-23, 1989.
DOI : 10.1016/0924-4247(89)80046-9

J. B. Lee, I. S. Kim, Y. C. Sim, and T. Y. Kim, Optimization and fabrication of a dual thermopile sensor based on the BEM, Sensors and Actuators A: Physical, vol.64, issue.2, pp.179-184, 1998.
DOI : 10.1016/S0924-4247(98)80012-5

A. V. Hewardeen and P. Sarro, Thermal sensors based on the seebeck effect, Sensors and Actuators, vol.10, issue.3-4, pp.321-346, 1986.
DOI : 10.1016/0250-6874(86)80053-1

C. Vi, C. Et, and . Futurs, Dans cette thèse nous avons étudié deux types de transducteurs acoustiques ultrasonores micro-usinés ainsi que leur interface électronique. La réalisation d un transducteur ultrasonore micro-usiné fonctionnant en mode pulse-écho et la conception d une interface générique de traitement des signaux issus de deux types de transducteurs ultrasonores

L. Rufer, S. Mir, E. Simeu, and C. Domingues, On-Chip Pseudorandom MEMS Testing, Journal of Electronic Testing, vol.46, issue.47, 2004.
DOI : 10.1007/s10836-005-6353-9

URL : https://hal.archives-ouvertes.fr/hal-00012850

C. Domingues, S. Mir, and L. Rufer, Design of a MEMS-based ultrasonic pulse-echo system, 18th Conference on Design of Circuits and Integrated Systems, Ciudad Real, pp.623-628, 2003.
URL : https://hal.archives-ouvertes.fr/hal-01376263

L. Rufer, S. Mir, C. Domingues, and E. Simeu, MLS-based technique for MEMS characterization, pp.157-164, 2003.
URL : https://hal.archives-ouvertes.fr/hal-01214583

L. Rufer, S. Mir, E. Simeu, and C. Domingues, On-chip pseudorandom MEMS testing. 9th International Mixed-Signal Testing Workshop, pp.93-98, 2003.
DOI : 10.1007/s10836-005-6353-9

URL : https://hal.archives-ouvertes.fr/hal-00012850

L. Rufer, S. Mir, E. Simeu, and C. Domingues, On-chip testing of MEMS using pseudo-random test sequences, Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS 2003., pp.50-55, 2003.
DOI : 10.1109/DTIP.2003.1287007

URL : https://hal.archives-ouvertes.fr/hal-00012853

S. Mir, L. Rolíndez, C. Domingues, and L. Rufer, An implementation of memory-based on-chip analogue test signal generation, Asia South Pacific Design Automation Conference, Invited Talk, pp.663-668, 2003.
URL : https://hal.archives-ouvertes.fr/hal-00012867

S. Mir, L. Rufer, and C. Domingues, Behavioural modelling and simulation of a MUT-based pulseécho system, pp.18-24, 2002.

S. Mir, C. Diedrich, C. Roman, and C. Domingues, On-chip test signal generation for acoustic and ultrasound microelectronic interfaces, 8th IEEE International Mixed-Signal Testing Workshop, pp.137-144, 2002.
URL : https://hal.archives-ouvertes.fr/hal-01214595

L. Rufer, C. Domingues, and S. Mir, Behavioural modelling and simulation of a MEMS-based ultrasonic pulse-echo system, SPIE Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS, pp.171-182, 2002.
URL : https://hal.archives-ouvertes.fr/hal-00012877

C. Domingues, L. Rufer, and S. Mir, Modélisation et simulation d'un microsystème ultrasonore pour une application pulse-écho, 5ème Journées Nationales du Réseau Doctoral de Microélectronique, pp.87-88, 2002.

S. Mir and C. Domingues, On-chip test signal generation for analogue and mixed-signal cores. 1st MEDEA+ Open Workshop TechnoDat, 2002.