G. Sainfort, P. Mouturat, P. Pépin, J. Petit, G. Cabane et al., Propriétés mécaniques à chaud des alliages fer-aluminium à forte teneur en aluminium, Mém. Sci. Rev. Métall., LX, issue.2, pp.125-134, 1963.

P. Moine, J. Cottu, J. Caisso, and R. Et-jacquesson, Limite élastique du FeAl 40%, C. R. Acad. Sci. Paris, T, vol.261, pp.3121-3124, 1965.

J. Cottu, P. Moine, P. Grosbras, J. Caisso, and R. Et-jacquesson, Quelques aspects de la fragilité à chaud de l'alliage Fer-Aluminium à 40% at d'aluminium, Mém. Sci. Rev. Métall., LXIII, issue.9, pp.793-799, 1966.

H. J. Leamy, E. D. Gibson, and F. X. Et-kayser, The elastic stiffness coefficients of iron-aluminum alloys???I experimental results and thermodynamic analysis, Acta Metallurgica, vol.15, issue.12, pp.1827-1838, 1967.
DOI : 10.1016/0001-6160(67)90047-8

J. Rieu and C. Et-goux, Etude du durcissement par trempe des alliages ordonnés Fe-Al de type L2o, Mém. Sci. Rev. Métall., LXVI, issue.12, pp.869-880, 1969.

M. A. Crimp and K. Vedula, Effect of boron on the tensile properties of B2 FeAl, Materials Science and Engineering, vol.78, issue.2, pp.193-200, 1986.
DOI : 10.1016/0025-5416(86)90323-X

F. Moret, R. Baccino, P. Martel, and L. Et-guetaz, Propiétés et applications des alliages intermétalliques B2-FeAl, J. de Physique, vol.6, issue.C2, pp.281-289, 1996.
DOI : 10.1051/jp4:1996240
URL : https://hal.archives-ouvertes.fr/jpa-00254218/document

D. B. Miracle, R. J. Et-darolia, and R. L. Et-fleischer, NiAl and its alloys, in Intermetallic Compounds, pp.53-72, 1994.

C. H. Kong and P. R. Et-munroe, The effect of cooling rate and heat treatment on hardness across the FeAl-NiAl pseudobinary, Scripta Metallurgica et Materialia, vol.28, issue.10, pp.1241-1244, 1993.
DOI : 10.1016/0956-716X(93)90461-Z

C. H. Kong and P. R. Et-munroe, The effect of ternary additions on the vacancy hardening of FeAl, Scripta Metallurgica et Materialia, vol.30, issue.8, pp.1079-1083, 1994.
DOI : 10.1016/0956-716X(94)90559-2

P. R. Munroe, The effect of nickel on vacancy hardening in iron-rich FeAl, Intermetallics, vol.4, issue.1, pp.5-11, 1996.
DOI : 10.1016/0966-9795(95)00011-M

J. H. Schneibel, P. R. Munroe, and L. M. Et-pike, Strength, thermal defects and solid solution hardening in nickel-containing B2 iron aluminides in "High-Temperature Ordered Intermetallic Alloys VII, Boston. M.R.S, vol.460, pp.379-384, 1996.

I. Baker and P. R. Et-munroe, Mechanical properties of FeAl, International Materials Reviews, vol.59, issue.5, pp.181-205, 1997.
DOI : 10.1016/0921-5093(92)90271-2

C. T. Liu and K. S. Et-kumar, Ordered intermetallic alloys, part I: Nickel and iron aluminides, JOM, vol.153, issue.3, pp.38-44, 1993.
DOI : 10.1007/BF03223218

C. T. Liu, J. Stringer, J. N. Mundy, L. L. Horton, and P. Et-angelini, Ordered intermetallic alloys: an assessment, Intermetallics, vol.5, issue.8, pp.579-596, 1997.
DOI : 10.1016/S0966-9795(97)00045-9

C. T. Liu, E. P. George, P. J. Maziasz, and J. H. Schneibel, Recent advances in B2 iron aluminide alloys: deformation, fracture and alloy design, Materials Science and Engineering: A, vol.258, issue.1-2, pp.84-98, 1998.
DOI : 10.1016/S0921-5093(98)00921-6

N. S. Stoloff, Iron aluminides: present status and future prospects, Materials Science and Engineering: A, vol.258, issue.1-2, pp.1-14, 1998.
DOI : 10.1016/S0921-5093(98)00909-5

S. C. Deevi and V. K. Et-sikka, Nickel and iron aluminides: an overview on properties, processing, and applications, Intermetallics, vol.4, issue.5, pp.357-375, 1996.
DOI : 10.1016/0966-9795(95)00056-9

T. Kruml, E. Conforto, B. L. Piccolo, D. Caillard, and J. L. Et-martin, From dislocation cores to strength and work-hardening: a study of binary Ni3Al, Acta Materialia, vol.50, issue.20, pp.5091-5101, 2002.
DOI : 10.1016/S1359-6454(02)00364-6

J. R. Stephens, The B2 Aluminides As Alternative Materials, MRS Proceedings, vol.73, pp.381-395, 1984.
DOI : 10.1016/0025-5416(83)90029-0

J. Doychak, J. H. Westbrook, and R. L. Et-fleischer, Oxidation behavior of high-temperature intermetallics, Intermetallic Compounds, pp.977-1016, 1994.

D. J. Duquette, J. H. Westbrook, and R. L. Et-fleischer, Corrosion of intermetallic compounds, Intermetallic Compounds, pp.965-975, 1994.

R. Baccino, D. S. Filippo, F. Moret, A. Lefort, and G. Webb, Properties and applications of a high specific stiffness mechanically alloyed iron aluminide grade, PM94, Powder Metallurgy World Congress, pp.1239-1242, 1994.

S. Jiao, N. Bird, P. B. Hirsch, and G. Taylor, Yield stress anomalies in single crystals of Ti-54.5 at.% Al: I. Overview and (011) superdislocation slip, Philosophical Magazine A, vol.16, issue.3, pp.777-802, 1998.
DOI : 10.1016/0921-5093(94)03248-3

N. S. Stoloff and R. G. Et-davies, The plastic deformation of ordered FeCo and Fe3 Al alloys, Acta Metallurgica, vol.12, issue.5, pp.473-485, 1964.
DOI : 10.1016/0001-6160(64)90019-7

D. G. Morris, The yield stress anomaly in Fe[sbnd]A1 alloys: The local climb lock model, Philosophical Magazine A, vol.84, issue.6, pp.1281-1294, 1995.
DOI : 10.1080/01418618908229790

P. Kratochvíl, J. Kopecek, and J. Et-pesicka, Order of Fe3Al alloys and their yield stress, Materials Science and Engineering: A, vol.234, issue.236, pp.234-236, 2001.
DOI : 10.1016/S0921-5093(97)00206-2

R. Carleton, E. P. George, and R. H. Et-zee, Effects of deviations from stoichiometry on the strength anomaly and fracture behavior of B-doped FeAl, Intermetallics, vol.3, issue.6, pp.433-441, 1995.
DOI : 10.1016/0966-9795(94)00041-I

D. G. Morris and M. A. Morris, Dislocation processes leading to the stress anomaly in B2-type Fe-40%Al single crystals, Intermetallics, vol.5, issue.4, pp.245-263, 1997.
DOI : 10.1016/S0966-9795(96)00095-7

E. P. George and I. Baker, A model for the yield strength anomaly of Fe???Al, Philosophical Magazine A, vol.35, issue.3, pp.737-750, 1998.
DOI : 10.1080/01418618908229790

D. Li, D. Lin, and Y. Et-liu, Effect of temperature on the tensile properties and dislocation structures of FeAl alloys, Materials Science and Engineering: A, vol.249, issue.1-2, pp.206-216, 1998.
DOI : 10.1016/S0921-5093(98)00507-3

Y. Yang, I. Baker, . T. Iii-g, and C. Cady, The yield stress anomaly in stoichiometric FeAl at high strain rate, Scripta Materialia, vol.40, issue.4, pp.403-408, 1999.
DOI : 10.1016/S1359-6462(98)00448-5

O. Calonne, A. Fraczkiewicz, and F. Louchet, Yield strength anomaly in b2-ordered FeAl alloys: role of boron, Scripta Materialia, vol.43, issue.1, pp.69-75, 2000.
DOI : 10.1016/S1359-6462(00)00367-5

C. L. Briant, J. H. Westbrook, and R. L. Et-fleischer, Intergranular and cleavage fracture, Intermetallic Compounds, pp.895-910, 1994.

D. G. Morris, J. Chao, C. G. Oca, and M. A. Et-muñoz-morris, Obtaining good ductility in an FeAl intermetallic, Materials Science and Engineering: A, vol.339, issue.1-2, pp.232-240, 2003.
DOI : 10.1016/S0921-5093(02)00108-9

A. Fraczkiewicz, A. Gay, and M. Et-biscondi, On the boron effect in FeAl (B2) intermetallic alloys, Materials Science and Engineering: A, vol.258, issue.1-2, pp.108-114, 1998.
DOI : 10.1016/S0921-5093(98)00923-X

C. L. White, R. A. Padgett, and C. T. Liu, Surface and grain boundary segregation in relation to intergranular fracture: Boron and sulfur in Ni3Al, Scripta Metallurgica, vol.18, issue.12, pp.1417-1420, 1984.
DOI : 10.1016/0036-9748(84)90377-6

E. P. George, C. L. White, and J. A. Et-horton, Grain boundary cohesion and fracture in ordered intermetallics, Scripta Metallurgica et Materialia, vol.25, issue.6, pp.1259-1264, 1991.
DOI : 10.1016/0956-716X(91)90397-J

I. Baker, Improving the ductility of intermetallic compounds by particle-induced slip homogenization, Scripta Materialia, vol.41, issue.4, pp.409-414, 1999.
DOI : 10.1016/S1359-6462(99)00100-1

D. G. Morris, S. Gunther, and C. Et-briguet, Thermomechanical processing of mechanically-alloyed Fe-40Al and the influence on mechanical properties, Scripta Materialia, vol.37, issue.1, pp.71-77, 1997.
DOI : 10.1016/S1359-6462(97)00061-4

E. Godlewska, S. Szczepanik, R. Mania, J. Krawiarz, and S. Et-koziñski, FeAl materials from intermetallic powders, Intermetallics, vol.11, issue.4, pp.207-312, 2003.
DOI : 10.1016/S0966-9795(02)00247-9

T. Grosdidier, E. Suzon, and F. Et-wagner, Primary recrystallization in an ODS FeAl alloy: an effective way to modify texture and microstructure, Intermetallics, vol.12, issue.6, pp.645-654, 2004.
DOI : 10.1016/j.intermet.2004.03.014

D. G. Morris, C. G. Oca, J. Chao, and M. A. Et-muñoz-morris, Influence of machining conditions on tensile stress and ductility of a mechanically alloyed Fe???40Al intermetallic, Scripta Materialia, vol.46, issue.12, pp.843-850, 2002.
DOI : 10.1016/S1359-6462(02)00063-5

M. A. Muñoz-morris, C. G. Oca, and D. G. Morris, Microstructure and room temperature strength of Fe-40Al containing nanocrystalline oxide particles, Acta Materialia, vol.51, issue.17, pp.5187-5197, 2003.
DOI : 10.1016/S1359-6454(03)00382-3

K. Schlimbach and E. Et-lugscheider, Brazing technology for joining intermetallics in "Brazing Conference Loet'01, Aachen, 2001.

R. D. Noebe, R. R. Bowman, and M. V. Et-nathal, Physical and mechanical properties of the B2 compound NiAl, International Materials Reviews, vol.62, issue.149, pp.193-232, 1993.
DOI : 10.5006/0010-9312-32.12.476

O. Ikeda, I. Ohnuma, R. Kainuma, and K. Et-ishida, Phase equilibria and stability of ordered BCC phases in the Fe-rich portion of the Fe???Al system, Intermetallics, vol.9, issue.9, pp.755-761, 2001.
DOI : 10.1016/S0966-9795(01)00058-9

M. G. Mendiratta and C. C. Et-law, Dislocation energies and mobilities in B2-ordered Fe-Al alloys, Journal of Materials Science, vol.6, issue.2, pp.607-611, 1987.
DOI : 10.1007/BF01160776

Y. A. Chang, L. M. Pike, C. T. Liu, A. R. Bilbrey, and D. S. Et-stone, Correlation of the hardness and vacancy concentration in FeAl, Intermetallics, vol.1, issue.2, pp.107-115, 1993.
DOI : 10.1016/0966-9795(93)90028-T

M. Kogachi and T. Et-haraguchi, Quenched-in vacancies in B2-structured intermetallic compound FeAl, Materials Science and Engineering: A, vol.230, issue.1-2, pp.124-131, 1997.
DOI : 10.1016/S0921-5093(97)00016-6

W. B. Pearson, A hanbook of lattice spacings and structures of metals and alloys, in International series of monographs on metal physics and physical metallurgy, pp.343-345, 1958.

T. Haraguchi and M. Et-kogachi, Point defect behavior in B2-type intermetallic compounds, Materials Science and Engineering: A, vol.329, issue.331, pp.329-331, 2002.
DOI : 10.1016/S0921-5093(01)01613-6

J. L. Jordan and S. C. Et-deevi, Vacancy formation and effects in FeAl, Intermetallics, vol.11, issue.6, pp.507-528, 2003.
DOI : 10.1016/S0966-9795(03)00027-X

J. P. Neumann, On the occurrence of substitutional and triple defects in intermetallic phases with the B2 structure, Acta Metallurgica, vol.28, issue.8, pp.1165-1170, 1980.
DOI : 10.1016/0001-6160(80)90099-1

R. Besson, Simulation à l'échelle atomique de quelques propriétés volumiques et interfaciales d'alliages ordonnés fer-aluminium, Thèse de doctorat, 1997.

R. Besson and J. Et-morillo, Development of a semiempirical n-body noncentral potential for Fe-Al alloys, Physical Review B, vol.55, issue.1, pp.193-204, 1997.
DOI : 10.1103/PhysRevB.55.193

C. L. Fu, Y. Ye, and M. H. Et-yoo, Bulk and defect properties of ordered intermetallics : a first-principles total-energy investigation in "High Temperature Ordered Intermetallics Alloys V, Boston. M.R.S. Materials Research Society Symposium Proceedings, pp.288-309, 1992.

K. Ho and R. A. Et-dodd, Point defects in FeAl, Scripta Metallurgica, vol.12, issue.11, pp.1055-1058, 1978.
DOI : 10.1016/0036-9748(78)90024-8

J. Mayer and M. Et-fähnle, AB-initio calculation of effective formation volumes for atomic defects in B2-FeAl, Scripta Materialia, vol.37, issue.2, pp.131-134, 1997.
DOI : 10.1016/S1359-6462(97)00087-0

T. Haraguchi, F. Hori, R. Oshima, and M. Et-kogachi, A study of vacancy-type defects in the B2-phase region of the Fe???Al system by positron annihilation method, Intermetallics, vol.9, issue.9, pp.763-770, 2001.
DOI : 10.1016/S0966-9795(01)00061-9

G. Bester, B. Meyer, M. Fähnle, and C. L. Et-fu, Dominant thermal defects in B2???FeAl, Materials Science and Engineering: A, vol.323, issue.1-2, pp.487-90, 2002.
DOI : 10.1016/S0921-5093(01)01523-4

R. Besson, A. Legris, and J. Et-morillo, Comprehensive ab initio thermodynamic treatment of impurities in ordered alloys : application to boron in B2 FeAl, Phys. Rev. Letters, pp.89-225502, 2002.

J. Wolff, M. Franz, A. Broska, R. Kerl, M. Weinhagen et al., Point defects and their properties in FeAl and FeSi alloys, Intermetallics, vol.7, issue.3-4, pp.289-300, 1999.
DOI : 10.1016/S0966-9795(98)00105-8

M. Kogachi, T. Haraguchi, and S. M. Et-kim, Point defect behavior in high temperature region in the B2-type intermetallic compound FeAl, Intermetallics, vol.6, issue.6, pp.499-510, 1998.
DOI : 10.1016/S0966-9795(97)00097-6

D. Paris and P. Et-lesbats, Vacancies in Fe-Al alloys, J. Nuclear Materials, vol.69, issue.70, pp.628-632, 1978.
URL : https://hal.archives-ouvertes.fr/hal-00308065

D. Paris, P. Lesbats, and J. Et-levy, An investigation of the distribution of vacancies in an ordered Fe???Al alloy by field ion microscopy, Scripta Metallurgica, vol.9, issue.12, pp.1373-1378, 1975.
DOI : 10.1016/0036-9748(75)90457-3

J. Rivière and J. Et-grilhé, Influence de la concentration en aluminium sur l'??nergie de migration des lacunes de trempe dans les alliages ordonn??s Fe???Al, Physica Status Solidi (a), vol.27, issue.2, pp.429-436, 1974.
DOI : 10.1002/pssa.2210250208

J. Rivière, H. Zonon, and J. Et-grilhé, Annealing kinetic of quenched-in vacancies in a Fe???40 at% Al ordered alloy, Physica Status Solidi (a), vol.129, issue.2, pp.545-551, 1973.
DOI : 10.1002/pssa.2210160224

A. Fourdeux and P. Et-lesbats, Annealing out of quenched-in vacancies in an ordered B2 type Fe-Al single crystal, Philosophical Magazine A, vol.38, issue.1, pp.81-93, 1982.
DOI : 10.1080/01418618208243904
URL : https://hal.archives-ouvertes.fr/hal-00306971

A. Gay-brun, Etude de l'effet du bore sur les alliages FeAl ordonnés de structure B2, Thèse de doctorat, 1998.

M. A. Morris, O. George, and D. G. Et-morris, Vacancies, vacancy aggregates and hardening in FeAl, Materials Science and Engineering: A, vol.258, issue.1-2, pp.99-107, 1998.
DOI : 10.1016/S0921-5093(98)00922-8

D. G. Morris and M. A. Morris, Quenching and Ageing Effects on Defects and Their Structures in FeAl Alloys, and the Influence on Hardening and Softening, Scripta Materialia, vol.38, issue.3, pp.509-516, 1998.
DOI : 10.1016/S1359-6462(97)00468-5

R. L. Fleischer, Solution hardening, Acta Metallurgica, vol.9, issue.11, pp.996-1000, 1961.
DOI : 10.1016/0001-6160(61)90242-5

Y. Yang and I. Et-baker, The influence of vacancy concentration on the mechanical behavior of Fe-40Al, Intermetallics, vol.6, issue.3, pp.167-175, 1998.
DOI : 10.1016/S0966-9795(97)00062-9

R. G. Campany, M. H. Loretto, and R. E. Et-smallman, The determination of the 1/2<lll> {110} antiphase boundary energy of NiAl, Journal of Microscopy, vol.4, issue.2, pp.174-179, 1973.
DOI : 10.1111/j.1365-2818.1973.tb03820.x

T. Hong and A. J. Et-freeman, Effect of stoichiometry on the structural properties and the electronic structure of intermetallics: Anti-phase boundary energies in FeAl and NiAl, Journal of Materials Research, vol.7, issue.1, pp.68-79, 1992.
DOI : 10.1557/JMR.1992.0068

D. G. Morris and M. A. Morris, Strengthening at intermediate temperatures in iron aluminides, Materials Science and Engineering: A, vol.239, issue.240, pp.239-240, 1997.
DOI : 10.1016/S0921-5093(97)00557-1

C. L. Fu and M. H. Et-yoo, Deformation behavior of B2 type aluminides: FeAl and NiAl, Acta Metallurgica et Materialia, vol.40, issue.4, pp.703-711, 1992.
DOI : 10.1016/0956-7151(92)90012-4

K. Yoshimi and S. Et-hanada, Positive temperature dependance of yield stress in B2 FeAl in "Structural Intermetallics". The Minerals, Metals & Materials Society, pp.475-482, 1993.

J. Brown, R. Srinivasan, J. M. Et-daw, and M. S. , The mechanics of slip transition at intermediate temperatures in <001>-oriented NiAl single crystals II. A metastable state for ??<111>{110} dislocations in NiAl and its role in their decomposition, Philosophical Magazine A, vol.31, issue.12, pp.80-2855, 2000.
DOI : 10.1080/01418610008223898

R. Srinivasan, J. Brown, M. S. Daw, R. D. Noebe, and M. J. Et-mills, The mechanics of slip transition at intermediate temperatures in <001>-oriented NiAl single crystals I. Experimental observations of the decomposition of ??<111> dislocations in Ni???44 at.% Al, Philosophical Magazine A, vol.364, issue.12, pp.80-2841, 2000.
DOI : 10.1080/01418619208201475

D. B. Miracle, Overview No. 104 The physical and mechanical properties of NiAl, Acta Metallurgica et Materialia, vol.41, issue.3, p.649, 1993.
DOI : 10.1016/0956-7151(93)90001-9

S. Takeuchi, Glide of interacting partial dislocations in the Peierls mechanism, Philosophical Magazine A, vol.34, issue.6, pp.1255-1263, 1995.
DOI : 10.1143/JJAP.33.1114

I. Baker, P. Nagpal, F. Liu, and P. R. Et-munroe, The effect of grain size on the yield strength of FeAl and NiAl, Acta Metallurgica et Materialia, vol.39, issue.7, pp.1637-1644, 1991.
DOI : 10.1016/0956-7151(91)90251-U

N. Junqua, Etude des défauts obtenus par condensation des lacunes et des interstitiels créés par trempe ou irradiation dans un alliage cubique centré ordonné : le Fe-Al40, Thèse de doctorat, 1981.

N. Junqua, J. C. Desoyer, and P. Et-moine, Electron microscopy observation of quenching defects in an ordered alloy of B2 type: Fe???40 at% Al, Physica Status Solidi (a), vol.16, issue.1, pp.387-395, 1973.
DOI : 10.1002/pssa.2210180139

R. C. Crawford, Deformation of an ordered Fe-35??5 at. % Al alloy, Philosophical Magazine, vol.245, issue.3, pp.529-555, 1976.
DOI : 10.1098/rspa.1927.0120

Y. Umakoshi and M. Et-yamaguchi, Deformation of FeAl single crystals at high temperatures, Philosophical Magazine A, vol.39, issue.4, pp.573-588, 1980.
DOI : 10.1080/01418618008239334

Y. Umakoshi and M. Et-yamaguchi, The effect of compositional deviations from stoichiometry on the transition in slip directions from (111) to (001) in FeA1 at high temperatures, Philosophical Magazine A, vol.39, issue.3, p.711, 1981.
DOI : 10.1080/01418618108236173

K. Yoshimi, S. Hanada, and M. H. Et-yoo, Yielding and plastic flow behavior of B2-type Fe-39.5 mol.% A1 single crystals in compression, Acta Metallurgica et Materialia, vol.43, issue.11, pp.4141-4151, 1995.
DOI : 10.1016/0956-7151(95)00098-G

K. Yoshimi, S. Hanada, and M. H. Et-yoo, Tensile properties of B2-type Fe-39mol%Al single crystals at elevated temperatures, Intermetallics, vol.4, issue.2, pp.159-168, 1996.
DOI : 10.1016/0966-9795(95)00032-1

K. Yoshimi, S. Hanada, and M. H. Et-yoo, On lattice defects and strength anomaly of B2-type FeAl, Intermetallics, vol.4, pp.4-5, 1996.
DOI : 10.1016/0966-9795(96)80194-4

K. Yoshimi and S. Et-hanada, The strength properties of iron aluminides, JOM, vol.71, issue.193, pp.46-49, 1997.
DOI : 10.1007/BF02914403

K. Yoshimi, M. H. Yoo, and S. Et-hanada, Slip band propagation and slip vector transition in B2 FeAl single crystals, Acta Materialia, vol.46, issue.16, pp.5769-5776, 1998.
DOI : 10.1016/S1359-6454(98)00228-6

O. Calonne, Anomalie plastique de l'alliage Fe-40Al ordonné B2, Thèse de doctorat, 2002.

P. R. Munroe and I. Baker, Observation of ???001??? dislocations and a mechanism for transgranular fracture on {001} in FeAl, Acta Metallurgica et Materialia, vol.39, issue.5, pp.1011-1017, 1991.
DOI : 10.1016/0956-7151(91)90302-H

D. G. Morris, C. T. Liu, and E. P. Et-george, Pinning of dislocations and the origin of the stress anomaly in FeAl alloys, Intermetallics, vol.7, issue.9, pp.1059-1068, 1999.
DOI : 10.1016/S0966-9795(99)00015-1

I. Baker and D. J. Gaydosh, Flow and fracture of Fe???Al, Materials Science and Engineering, vol.96, pp.147-158, 1987.
DOI : 10.1016/0025-5416(87)90549-0

Z. Song, M. Hida, A. Sakakibara, and Y. Et-takemoto, Antiphase domain boundary tubes in plastically deformed Fe-Al alloys with B2 ordered structure, Scripta Materialia, vol.37, issue.11, pp.1617-1622, 1997.
DOI : 10.1016/S1359-6462(97)00328-X

B. K. Kad and J. A. Et-horton, Discrepancies between microscopic (TEM) and macroscopic (texture) observations in high temperature deformation of FeAl and Fe3Al-based alloys, Materials Science and Engineering: A, vol.239, issue.240, pp.239-240, 1997.
DOI : 10.1016/S0921-5093(97)00569-8

C. T. Liu and E. P. Et-george, Intergranular fracture and microalloying effects in ordered intermetallics, in Structure and property relationships for interfaces, pp.281-308, 1990.

N. S. Stoloff, C. T. Liu, and S. C. Et-deevi, Emerging applications of intermetallics, Intermetallics, vol.8, issue.9-11, pp.1313-1320, 2000.
DOI : 10.1016/S0966-9795(00)00077-7

C. T. Liu, E. H. Lee, and C. G. Et-mckamey, An environmental effect as the major cause for room-temperature embrittlement in FeAl, Scripta Metallurgica, vol.23, issue.6, pp.875-880, 1989.
DOI : 10.1016/0036-9748(89)90263-9

I. Baker, D. Wu, S. O. Kruijver, and E. P. Et-george, The effects of environment on the room-temperature mechanical behavior of single-slip oriented FeAl single crystals, Materials Science and Engineering: A, vol.329, issue.331, pp.329-331, 2002.
DOI : 10.1016/S0921-5093(01)01518-0

S. Launois and A. Et-fraczkiewicz, Effet de l'environnement sur le comportement mécanique d'un alliage FeAl (40 at.% Al) renforcé {Effect of environment on mechanical behavior of a reinforced FeAl alloy (40 at.% Al)}, J. de Physique, vol.6, issue.C2, pp.223-228, 1996.

L. M. Pike and C. T. Liu, Environmental and Strain Rate Effects on the Ductility and Yield Strength of Fe-40Al, Scripta Materialia, vol.38, issue.10, pp.1475-1480, 1998.
DOI : 10.1016/S1359-6462(98)00087-6

J. Bystrzycki and R. A. Et-varin, Environmental sensitivity and mechanical behavior of boron-doped Fe???45at.%Al intermetallic in the temperature range from 77 to 1000 K, Materials Science and Engineering: A, vol.270, issue.2, pp.151-161, 1999.
DOI : 10.1016/S0921-5093(99)00165-3

L. Pang and K. S. Et-kumar, On the impact toughness of Fe-40Al-based B2 aluminides, Intermetallics, vol.8, issue.2, pp.157-163, 2000.
DOI : 10.1016/S0966-9795(99)00083-7

L. Pang and K. S. Et-kumar, Tensile ductility of an Fe???40Al???0.6C alloy, Intermetallics, vol.8, issue.5-6, pp.693-698, 2000.
DOI : 10.1016/S0966-9795(99)00145-4

D. Wu and I. Et-baker, The effect of environment and strain rate on the room temperature tensile properties of FeAl single crystals, Intermetallics, vol.9, issue.1, pp.57-65, 2001.
DOI : 10.1016/S0966-9795(00)00097-2

J. W. Cohron, Y. Lin, R. H. Zee, and E. P. Et-george, Room-temperature mechanical behavior of FeAl: effects of stoichiometry, environment, and boron addition, Acta Materialia, vol.46, issue.17, pp.6245-6256, 1998.
DOI : 10.1016/S1359-6454(98)00254-7

M. Wittmann, D. Wu, I. Baker, E. P. George, and L. Et-heatherly, The role of edge and screw dislocations on hydrogen embrittlement of Fe???40Al, Materials Science and Engineering: A, vol.319, issue.321, pp.319-321, 2001.
DOI : 10.1016/S0921-5093(01)01060-7

I. Baker, H. Xiao, O. Klein, C. Nelson, and J. D. Et-whittenberger, The effect of temperature and Fe: Al ratio on the flow and fracture of FeAl, Acta Metallurgica et Materialia, vol.43, issue.4, pp.1723-1730, 1995.
DOI : 10.1016/0956-7151(94)00369-S

L. M. Pike and C. T. Liu, The effect of vacancies on the environmental yield strength dependence of boron-free and boron-doped Fe-40Al, Intermetallics, vol.8, issue.12, pp.1413-1416, 2000.
DOI : 10.1016/S0966-9795(00)00095-9

C. T. Liu and E. P. Et-george, Effect of aluminum concentration and boron dopant on environemental embrittlement in FeAl aluminides in "High Temperature Ordered Intermetallic Alloys IV, Boston. M.R.S. Materials Research Society Symposium Proceedings, p.213, 1990.

F. Louchet, Flow stress anomalies, mobile dislocation exhaustion and strain rate sensitivity, Philosophical Magazine A, vol.133, issue.4, pp.905-912, 1995.
DOI : 10.1080/01418619508244375

L. Pang and K. S. Et-kumar, Complex faults in a B2 iron aluminide alloy, Acta Materialia, vol.49, issue.12, pp.2215-2226, 2001.
DOI : 10.1016/S1359-6454(01)00140-9

S. C. Deevi, V. K. Sikka, B. J. Inkson, and R. W. Et-cahn, Effect of boron on the vacancy hardening of FeAl, Scripta Materialia, vol.36, issue.8, pp.899-904, 1997.
DOI : 10.1016/S1359-6462(96)00497-6

A. Choudhury, C. L. White, and C. R. Brooks, The effect of thermal history on intergranular boron segregation and fracture morphology of substoichiometric Ni 3Al, Scripta Metallurgica, vol.20, issue.7, pp.1061-1066, 1986.
DOI : 10.1016/0036-9748(86)90437-0

P. Lejcek and A. Et-fraczkiewicz, Boron segregation in intermetallics: on the possible origins of a low-level intergranular segregation, Intermetallics, vol.11, issue.10, pp.1053-1063, 2003.
DOI : 10.1016/S0966-9795(03)00135-3

L. Pang, S. M. Han, and K. S. Et-kumar, Tensile response of an Fe???40Al???0.7C???0.5B alloy, Acta Materialia, vol.50, issue.14, pp.3623-3639, 2002.
DOI : 10.1016/S1359-6454(02)00171-4

G. Webb, P. Juliet, and A. Et-lefort, Optimization of the boron content in FeAl (40 at.% Al) alloys, Scripta Metallurgica et Materialia, vol.28, issue.7, pp.769-772, 1993.
DOI : 10.1016/0956-716X(93)90350-2

I. Baker, X. Li, H. Xiao, R. Carleton, and E. P. Et-george, The room temperature strengthening effect of boron as a function of aluminum concentration in FeAl, Intermetallics, vol.6, issue.3, pp.177-183, 1998.
DOI : 10.1016/S0966-9795(97)00063-0

E. Cadel, D. Lemarchand, A. Gay, A. Fraczkiewicz, and D. Et-blavette, Atomic scale investigation of boron nanosegregation in Fe Al intermetallics, Scripta Materialia, vol.41, issue.4, pp.421-426, 1999.
DOI : 10.1016/S1359-6462(99)00106-2

E. Cadel, S. Launois, A. Fraczkiewicz, and D. Et-blavette, Investigation of boron-enriched Cottrell atmospheres in FeAl on an atomic-scale by a three-dimensionnal AP FIM, pp.80-725, 2000.

D. G. Morris, Possibilities for high-temperature strengthening in iron aluminides, Intermetallics, vol.6, issue.7-8, pp.753-758, 1998.
DOI : 10.1016/S0966-9795(98)00028-4

M. J. Mehl, B. M. Klein, D. A. Et-papaconstantopoulos, J. H. Westbrook, and R. L. Et-fleischer, First-principles calculation of elastic properties, Intermetallic Compounds, pp.195-210, 1994.

J. H. Schneibel and M. G. Et-jenkins, Slow crack growth at room temperature in FeAl, Scripta Metallurgica et Materialia, vol.28, issue.3, pp.389-393, 1993.
DOI : 10.1016/0956-716X(93)90447-Z

J. H. Schneibel, E. D. Specht, and W. A. Et-simpson, Solid solution strengthening in ternary B2 iron aluminides containing 3d transition elements, Intermetallics, vol.4, issue.7, pp.581-583, 1996.
DOI : 10.1016/0966-9795(96)00041-6

M. R. Harmouche and A. Et-wolfenden, Temperature and composition dependence of young's modulus for ordered B2 polycrystalline CoAl and FeAl, Materials Science and Engineering, vol.84, issue.12, pp.35-42, 1986.
DOI : 10.1016/0025-5416(86)90220-X

M. Kupka, Temperature dependence of the yield stress of an FeAl base alloy, Materials Science and Engineering: A, vol.336, issue.1-2, pp.320-322, 2002.
DOI : 10.1016/S0921-5093(01)01973-6

U. Reimann and G. Et-sauthoff, Effects of deviations from stoichiometry on the deformation behaviour of FeAl at intermediate temperatures, Intermetallics, vol.7, issue.3-4, pp.437-445, 1999.
DOI : 10.1016/S0966-9795(98)00104-6

X. Li and I. Et-baker, On the effect of strain rate on the yield stress anomaly in Fe40Al, Scripta Materialia, vol.36, issue.12, pp.1387-1390, 1997.
DOI : 10.1016/S1359-6462(97)00036-5

F. Louchet and . India, Modelling strength anomalies in crystalline materials in "Research Signpost, 1999.

P. Veyssière, Yield stress anomalies in ordered alloys: a review of microstructural findings and related hypotheses, Materials Science and Engineering: A, vol.309, issue.310, pp.309-310, 2001.
DOI : 10.1016/S0921-5093(00)01662-2

D. Caillard, Yield-stress anomalies and high-temperature mechanical properties of intermetallics and disordered alloys, Materials Science and Engineering: A, vol.319, issue.321, pp.319-321, 2001.
DOI : 10.1016/S0921-5093(00)02017-7

F. Louchet, Intermetallics : anomalous yielding, in Encyclopedia of materials : science and technology, pp.4158-4165, 2001.

P. A. Flinn, Theory of deformation in superlattices, Tans. Met. Soc. AIME, vol.218, pp.145-154, 1960.

E. P. George and I. Baker, Thermal vacancies and the yield anomaly of FeAl, Intermetallics, vol.6, issue.7-8, pp.759-763, 1998.
DOI : 10.1016/S0966-9795(98)00063-6

F. Louchet, A Classification of flow-Stress Anomalies, and the Specific Role of Strain Rate Sensitivity, Le Journal de Physique IV, vol.06, issue.C2, pp.189-198, 1996.
DOI : 10.1051/jp4:1996227
URL : https://hal.archives-ouvertes.fr/jpa-00254205

F. Louchet and M. Et-lebyodkin, A general approach for stress anomalies and plastic instabilities in intermetallics, Materials Science and Engineering: A, vol.239, issue.240, pp.239-240, 1997.
DOI : 10.1016/S0921-5093(97)00669-2

N. I. Medvedeva, Y. N. Gornostyrevb, D. L. Novikov, O. N. Mryasov, and A. J. Freeman, Ternary site preference energies, size misfits and solid solution hardening in NiAl and FeAl, Acta Materialia, vol.46, issue.10, pp.3433-3442, 1998.
DOI : 10.1016/S1359-6454(98)00042-1

J. H. Schneibel, E. P. George, and I. M. Et-anderson, Tensile ductility, slow crack growth, and fracture mode of ternary B2 iron aluminides at room temperature, Intermetallics, vol.5, issue.3, pp.185-193, 1997.
DOI : 10.1016/S0966-9795(96)00087-8

L. M. Pike, I. M. Anderson, C. T. Liu, and Y. A. Chang, Site occupancies, point defect concentrations, and solid solution hardening in B2 (Ni,Fe)Al, Acta Materialia, vol.50, issue.15, pp.3859-3879, 2002.
DOI : 10.1016/S1359-6454(02)00192-1

I. M. Anderson, ALCHEMI study of site distributions of 3d-transition metals in B2-ordered iron aluminides, Acta Materialia, vol.45, issue.9, pp.3897-3909, 1997.
DOI : 10.1016/S1359-6454(97)00042-6

G. H. Bozzolo, R. N. Noebe, and C. Et-amador, Site occupancy of ternary additions to B2 alloys, Intermetallics, vol.10, issue.2, pp.149-159, 2002.
DOI : 10.1016/S0966-9795(01)00124-8

R. Banerjee, S. Amancherlaa, S. Banerjee, and H. L. Et-fraser, Modeling of site occupancies in B2 FeAl and NiAl alloys with ternary additions, Acta Materialia, vol.50, issue.3, pp.633-641, 2002.
DOI : 10.1016/S1359-6454(01)00371-8

C. R. Kao, L. M. Pike, S. Chen, and Y. A. Chang, Site preference of substitutional additions to triple-defect B2 intermetallic compounds, Intermetallics, vol.2, issue.4, pp.235-247, 1994.
DOI : 10.1016/0966-9795(94)90010-8

C. L. Fu and J. Zou, Site preference of ternary alloying additions in FeAl and NiAl by first-principles calculations, Acta Materialia, vol.44, issue.4, pp.1471-1478, 1996.
DOI : 10.1016/1359-6454(95)00297-9

G. H. Bozzolo, J. Khalil, and R. N. Et-noebe, Modeling of the site preference in ternary B2-ordered Ni???Al???Fe alloys, Computational Materials Science, vol.24, issue.4, pp.457-480, 2002.
DOI : 10.1016/S0927-0256(02)00153-2

J. H. Schneibel, Strengthening of iron aluminides by vacancies and/or nickel, Materials Science and Engineering: A, vol.258, issue.1-2, pp.181-186, 1998.
DOI : 10.1016/S0921-5093(98)00932-0

J. H. Schneibel, E. D. Specht, and P. R. Et-munroe, On the strength of nickel-containing B2 iron aluminides, Materials Science and Engineering: A, vol.239, issue.240, pp.245-250, 1997.
DOI : 10.1016/S0921-5093(97)00588-1

L. M. Pike, C. T. Liu, and Y. A. Chang, Effect of Ni on vacancy concentrations and hardness in FeAl alloys Phase Diagrams, in Aluminum and Aluminum Alloys, Metall. Mat. Transactions A, vol.157, pp.29-1911, 1993.

P. R. Brenner, R. Srinivasan, R. D. Noebe, T. Lograsso, and M. J. Et-mills, Dislocation Processes an deformation behavior in <001>-oriented Fe x -Ni 60-x -Al 40 single crystals in "High-Temperature Ordered Intermetallic Alloys IX, Boston. M.R.S. Materials Research Society Symposium Proceedings, 2000.

P. R. Munroe and C. H. Kong, The effect of ternary additions on vacancy hardening in near stoichiometric FeAl, Intermetallics, vol.4, issue.5, pp.403-415, 1996.
DOI : 10.1016/0966-9795(95)00057-7

M. F. Savage, R. Srinivasan, M. S. Daw, T. Lograsso, and M. J. Et-mills, Dislocation processes and deformation behavior in (Fe,Ni)-Al single crystals, Materials Science and Engineering: A, vol.258, issue.1-2, pp.20-25, 1998.
DOI : 10.1016/S0921-5093(98)00911-3

L. M. Pike, Y. A. Chang, and C. T. Liu, Solid-solution hardening and softening by Fe additions to NiAl, Intermetallics, vol.5, issue.8, pp.601-608, 1997.
DOI : 10.1016/S0966-9795(97)00040-X

M. Salazar, A. Albiter, G. Rosas, and R. Et-pérez, Structural and mechanical properties of the AlFe intermetallic alloy with Li, Ce and Ni additions, Materials Science and Engineering: A, vol.351, issue.1-2, pp.154-159, 2003.
DOI : 10.1016/S0921-5093(02)00825-0

D. K. Patrick, K. Chang, D. B. Miracle, and H. A. Et-lipsitt, Burgers vector transition in Fe-Al-Ni alloys in "High Temperature Ordered Intermetallic Alloys IV, Boston. MRS, vol.213, pp.267-272, 1990.

F. R. Nabarro, Solution hardening in "Dislocations and properties of real materials, London. Institute of Metals, vol.323, pp.152-169, 1984.

H. Suzuki, Solid solution hardening in bc.c. alloys, in Dislocations in solids, pp.193-217, 1979.

T. Suzuki, S. Takeuchi, and H. Et-yoshinaga, Dislocation dynamics and plasticity, Series in Materials Science, 1991.
DOI : 10.1007/978-3-642-75774-7

J. Friedel and . Dislocations, International Series of Monographs on Solid State Physics, Smoluchowski R. et Kurti N, vol.3, 1964.

R. L. Fleischer, Substitutional solution hardening, Acta Metallurgica, vol.11, issue.3, pp.203-209, 1963.
DOI : 10.1016/0001-6160(63)90213-X

R. Labusch, A Statistical Theory of Solid Solution Hardening, physica status solidi (b), vol.61, issue.2, pp.659-669, 1970.
DOI : 10.1002/pssb.19700410221

G. Simmons and H. Et-wang, Single crystals elastic constants and calculated aggregate properties : a handbook, 1971.

D. G. Morris and S. Gunther, Strength and ductility of Fe???40Al alloy prepared by mechanical alloying, Materials Science and Engineering: A, vol.208, issue.1, pp.7-19, 1996.
DOI : 10.1016/0921-5093(95)10041-5

M. A. Muñoz-morris, C. G. Oca, and D. G. Morris, An analysis of strengthening mechanisms in a mechanically alloyed, oxide dispersion strengthened iron aluminide intermetallic, Acta Materialia, vol.50, issue.11, pp.2825-2836, 2002.
DOI : 10.1016/S1359-6454(02)00101-5

F. Louchet and M. Et-lebyodkin, Serrated flow associated with strength anomalies: a new type of plastic instability?, Intermetallics, vol.6, issue.7-8, pp.593-596, 1998.
DOI : 10.1016/S0966-9795(98)00043-0

C. T. Liu and E. P. Et-george, Environmental embrittlement in boron-free and boron-doped FeAl (40 at. % Al) alloys, Scripta Metallurgica et Materialia, vol.24, issue.7, pp.1285-1290, 1990.
DOI : 10.1016/0956-716X(90)90343-F

E. Cadel, A. Fraczkiewicz, and D. Et-blavette, Quelques liens structure-chimie locale des d??fauts plans ??lucid??s par tomographie atomique, Journal de Physique IV (Proceedings), vol.106, pp.23-32, 2003.
DOI : 10.1051/jp4:20030212

I. L. Ray, R. C. Crawford, and D. J. Et-cockayne, The weak beam technique applied to superlattice dislocations in an Iron-Aluminum alloy, Phil. Mag, vol.21, p.1022, 1970.

M. A. Crimp and K. Vedula, Room temperature deformation of single crystals B2 FeAl alloys : the effect of stoichiometry and cooling rate, p.559, 1991.

J. R. Low and A. M. Et-turkalo, Slip band structure and dislocation multiplication in silicon-iron crystals, Acta Metallurgica, vol.10, issue.3, pp.215-227, 1962.
DOI : 10.1016/0001-6160(62)90119-0

A. Lawley and H. L. Et-gaigher, Deformation structures in zone-melted molybdenum, Philosophical Magazine, vol.197, issue.103, pp.15-33, 1964.
DOI : 10.1016/0001-6160(63)90058-0

A. S. Keh, W. A. Spitzig, and Y. Et-nakada, Dislocation structures in deformed iron single crystals, Philosophical Magazine, vol.9, issue.184, pp.829-846, 1971.
DOI : 10.1007/BF02643448

H. Saka, K. Noda, and T. Et-imura, Tensile test of foil specimens of iron single crystals at room temperature and low temperatures under observation in high voltage electron microscope, Crystal Lattice Defects, vol.4, pp.45-56, 1973.

P. Veyssiére and R. Et-noebe, Weak-beam study of <111> superlattice dislocations in nial, Philosophical Magazine A, vol.239, issue.1, p.1, 1992.
DOI : 10.1080/01418618508237583

R. Würschum, C. Grupp, and H. Et-schaefer, 2-Type Fe Aluminides, Physical Review Letters, vol.75, issue.1, pp.97-100, 1995.
DOI : 10.1103/PhysRevLett.75.97

P. Haasen, Solution hardening in f.c.c. metals, in Dislocations in solids, pp.157-189, 1979.

N. F. Mott and F. R. Et-nabarro, An attempt to estimate the degree of precipitation hardening, with a simple model, Proc. Phys. Soc. Lond, pp.86-89, 1940.
DOI : 10.1088/0959-5309/52/1/312

N. F. Mott and F. R. Et-nabarro, Dislocation theory and transient creep in "Strength of metals, Bristol, pp.1-19, 1947.

P. Guyot, Interactions des dislocations avec des impuretés fixes in "Dislocations et déformation plastique, Yravals. Les Editions de Physique, 1979.

R. L. Fleischer, Solid-solution hardening, in The strengthening of metals, pp.93-140, 1964.

N. Masahashi, T. Takasugi, and O. Et-izumi, Mechanical properties of Ni3Al containing C, B and Be, Acta Metallurgica, vol.36, issue.7, pp.1823-1836, 1988.
DOI : 10.1016/0001-6160(88)90251-9

F. Louchet, B. Doisneau-cottignies, O. Calonne, A. Fraczkiewicz, M. Janecek et al., Is plastic flow always controlled by dislocation mobility? An answer from in situ transmission electron microscopy straining tests, Journal of Microscopy, vol.203, issue.1, pp.84-89, 2001.
DOI : 10.1046/j.1365-2818.2001.00915.x