.. Vers-un-modèle-biaxial, 123 3.6.1 Revue des critères de la littérature, p.129

S. Bibliographie and . Andrieux, Construction d'un champ de contraintes résiduelles enéquilibrèenéquilibrè a partir d'un champ aapproché donné sous forme analytique, 1994.

E. Astudillo, S. Calloch, F. Hild, G. Bernier, and B. Raka, Etude du comportement biaxial d'un microbéton armé de fibres par intercorrélation d'images, pp.49-54, 2001.

A. Atkins, On cropping and related processes, International Journal of Mechanical Sciences, vol.22, issue.4, pp.215-231, 1980.
DOI : 10.1016/0020-7403(80)90037-5

R. Batisse, H. D. Fant-jaeckels, F. Curie, and J. Virely, BIAXIAL HIGH CYCLE FATIGUE TESTS ON A GAS TRANSMISSION PIPELINE STEEL, Fatigue & Fracture of Engineering Materials and Structures, vol.853, issue.10, pp.1231-1238, 1996.
DOI : 10.1111/j.1460-2695.1996.tb00946.x

R. Billardon, J. Duffailly, and J. Lemaitre, A procedure based on vickers' microhardness tests to measure damage fields, Transactions of the 9th international conference on Structural Mechanic in Reactor Technology, pp.367-373, 1987.

R. Billardon, L. Hirsinger, and F. Ossart, Magneto-elastic coupled finite element analyses. Revue Européenne des Eléments Finis, pp.5-6525, 1999.

P. Brissonneau, Magnétisme et matériaux magnétiques pour l'´ electrotechnique, HERMES, 1997.

D. Brokken, Numerical modelling of ductile fracture in blanking, 1999.

D. Brokken, W. Brekelmans, and F. Baaijens, Predicting the shape of blanked products: a finite element approach, Journal of Materials Processing Technology, vol.103, issue.1, pp.51-56, 2000.
DOI : 10.1016/S0924-0136(00)00418-0

H. Bui, Introduction auxprobì emes inverses en mécanique des matériaux, Eyrolles-Coll. DEREF, vol.83, 1993.

N. Buiron, Modélisation multiéchelle du comportement magnéto-´ elastique couplé des matériaux ferromagétiques doux, 2000.

Y. Cao, N. Hu, J. Lu, H. Fukunaga, and Z. Yao, An inverse approach for constructing the residual stress field induced by welding, The Journal of Strain Analysis for Engineering Design, vol.30, issue.4, pp.345-360, 2002.
DOI : 10.1243/030932402760074562

M. Cervenka, B. Bouchet, and C. Gasc, Influence du mode de découpe sur le comportement en fatigue de tôles minces d'aciers dual-phase, Mémoires et Etudes Scientifiques Revue de Métallurgie, vol.mars, pp.184-194, 1990.

A. Chabenat and R. Martin, Découpage-Poinçonnage, volume BT3-Mécanique et Chaleur, 1978.

Z. Chen, C. Tang, T. Lee, and L. Chan, Numerical simulation of fine-blanking process using a mixed finite element method, International Journal of Mechanical Sciences, vol.44, issue.7, pp.1309-1333, 2002.
DOI : 10.1016/S0020-7403(02)00052-8

L. Chevalier, S. Calloch, F. Hild, and Y. Marco, Digital image correlation used to analyze the multiaxial behavior of rubber-like materials, European Journal of Mechanics - A/Solids, vol.20, issue.2, pp.169-187, 2001.
DOI : 10.1016/S0997-7538(00)01135-9
URL : https://hal.archives-ouvertes.fr/hal-00014019

J. Cognard, V. Feuardent, and J. Virely, Optimisation d'une structure pour essais mécaniques biaxiaux, Actes IDMME'96, 1996.

L. Daniel, O. Hubert, F. Ossart, and R. Billardon, Experimental analysis and multiscale modelling of the anisotropic mechanical and magnetostrictive behaviours of electrical steels, 6th European Mechanics of Materials Conference Lì ege, 2002.
DOI : 10.1051/jp4:20030194

J. Degauque, Les pertes d'´ energie dans les ferromagnétiques métalliques doux : origines physiques, Mémoires etÉtudeset´etÉtudes Scientifiques de Métallurgie, pp.5-23, 1985.

S. Demmerle and J. Boehler, Optimal design of biaxial tensile cruciform specimens, Journal of the Mechanics and Physics of Solids, vol.41, issue.1
DOI : 10.1016/0022-5096(93)90067-P

E. Trémolet-de-lacheisserie, Magnétisme, volume I-Fondements, 1999.

G. Geymonat, F. Hild, and S. Pagano, Identification of elastic parameters by displacement field measurement, Comptes Rendus M??canique, vol.330, issue.6, pp.403-408, 2002.
DOI : 10.1016/S1631-0721(02)01476-6
URL : https://hal.archives-ouvertes.fr/hal-00002934

A. Goijaerts, Prediction of Ductile Fracture in Metal Blanking, Journal of Manufacturing Science and Engineering, vol.122, issue.3, 1999.
DOI : 10.1115/1.1285909

A. Goijaerts, L. Govaert, and F. Baaijens, Evaluation of ductile fracture models for different metals in blanking, Journal of Materials Processing Technology, vol.110, issue.3, pp.312-323, 2001.
DOI : 10.1016/S0924-0136(00)00892-X

S. Golovaschenko, Numerical and experimental analyses of the trimmming process. NUMISHEET'99 -13-17 september, 1999.

C. Gourdin, Identification et modélisation du comportementélectromagnétiquecomportementélectromagnétique de structures ferromagnétiques, 1998.

B. Gouveia, J. Rordigues, and P. Martins, Ductile fracture in metalworking: experimental and theoretical research, Journal of Materials Processing Technology, vol.101, issue.1-3, pp.52-63, 2000.
DOI : 10.1016/S0924-0136(99)00449-5

R. Hambli, Blanking tool wear modeling using the finite element method, International Journal of Machine Tools and Manufacture, vol.41, issue.12, pp.1815-1829, 2001.
DOI : 10.1016/S0890-6955(01)00024-4

R. F. Hambli, J. Hild, M. Perié, and . Coret, Comparison between Lemaitre and Gurson damage models in crack growth simulation during blanking process, Hirsinger. ´ Etudes des déformations magnéto-´ elastiques dans les matériaux ferromagnétiques doux. ApplicationàApplication`Applicationà l'´ etude des déformations d'une structure de machiné electrique, pp.2769-2790, 1950.
DOI : 10.1016/S0020-7403(01)00070-4

O. Hubert, Influence des contraintes internes et de la structure des dislocations sur les couplages magnétomécaniques dans les alliages Fe-3%Si non orientés, 1998.

O. Hubert, L. Daniel, and R. Billardon, Experimental analysis of the magnetoelastic anisotropy of a non-oriented silicon iron alloy, Journal of Magnetism and Magnetic Materials, vol.254, issue.255, 2002.
DOI : 10.1016/S0304-8853(02)00850-8

O. Hubert and E. Hug, Influence of plastic strain on magnetic behaviour of non-oriented Fe???3Si and application to manufacturing test by punching, Materials Science and Technology, vol.3, issue.5, pp.482-487, 1995.
DOI : 10.1007/BF00540328
URL : https://hal.archives-ouvertes.fr/hal-01003013

E. Hug, O. Hubert, and M. Clavel, Some aspects of the magnetomechanical coupling in the strengthening of nonoriented and grain-oriented 3% SiFe alloys, IEEE Transactions on Magnetics, vol.33, issue.1, pp.763-771, 1997.
DOI : 10.1109/20.560110

K. Kashiwaya, Fundamentals of Nondestructive Measurement of Biaxial Stress in Steel Utilizing Magnetoelastic Effect under Low Magnetic Field, Japanese Journal of Applied Physics, vol.30, issue.Part 1, No. 11A, pp.2932-2942, 1991.
DOI : 10.1143/JJAP.30.2932

F. Klocke and H. Raedt, Friction in Modeling of Metal Forming Processes, International Journal of Forming Processes, vol.4, issue.1-2, pp.43-55, 2001.
DOI : 10.3166/ijfp.4.43-55

D. Ko, B. Kim, and J. Choi, Finite-element simulation of the shear process using the element-kill method, Journal of Materials Processing Technology, vol.72, issue.1, pp.129-140, 1997.
DOI : 10.1016/S0924-0136(97)00144-1

. Langman, Measurement of the mechanical stress in mild steel by means of rotation of magnetic field strength, NDT International, vol.14, issue.5, pp.255-262, 1981.
DOI : 10.1016/0308-9126(81)90078-X

R. Langman, Magnetic properties of mild steel under conditions of biaxial stress, IEEE Transactions on Magnetics, vol.26, issue.4, pp.1246-1251, 1990.
DOI : 10.1109/20.54015

P. Lemiale, S. Picart, and . Meunier, Experimental and Numerical Analysis of Blanking for Thin Sheet Metal Parts, International Journal of Forming Processes, vol.4, issue.3-4, pp.3-4319, 2001.
DOI : 10.3166/ijfp.4.319-333

. Lu, Handbook of Measurement of Residual Stresses, Society of Experimental Mechanics, vol.22, 1996.

G. Maeder, J. Lebrun, and J. Sprauel, Détermination par diffraction des rayons X des contraintes internes. Aspects macro et microscopiques, volume Ecole d'´ eté d'Oléron, Physique et mécanique de la mise en forme des matériaux, 1990.

A. Maillard, Etude expérimentale et numérique du découpage, 1991.

J. Makar and B. Tanner, The effect of plastic deformation and residual stresses on the permeability and magnetostriction of steels, Journal of Magnetism and Magnetic Materials, vol.222, 2000.

V. Maurel, R. Billardon, N. Buiron, O. Hubert, and F. Ossart, Méthode simplifiée de modélisation des contraintes résiduelles induites par la découpe d'une tôle, XVème congrés français de mécanique, 2001.

V. Maurel, F. Ossart, and R. Billardon, Residual stresses in punched laminations: Phenomenological analysis and influence on the magnetic behavior of electrical steels, accepté pour publication in Journ. of Appl. Physics, MMM'02, 2002.
DOI : 10.1063/1.1557279

V. Maurel, F. Ossart, and R. Billardon, A simplified model of residual stresses induced by punching, Int. J. of Form. Proc, vol.5, issue.2-3, pp.391-400, 2002.

V. Maurel, F. Ossart, Y. Marco, and R. Billardon, A new set-up to test biaxial stress effect on magneto-mechanic coupling. accepté pour publication in Journ. of Appl, Physics, p.2, 2002.

F. Mikhalenko and Y. Antonov, Workpiece stress in stamping process, Russian Engineering journal, LIII(No, issue.4, pp.61-64, 1973.

A. Moses, N. Derebasi, G. Loisos, and A. Schoppa, Aspects of the cut-edge effect stress on the power loss and flux density distribution in electrical steel sheets, Journal of Magnetism and Magnetic Materials, vol.215, issue.216, pp.215-216690, 2000.
DOI : 10.1016/S0304-8853(00)00260-2

F. Ossart, Validation d'un modèle simplifié permettant de rendre compte de l'effet de la découpe et expérimentation suréprouvettessuréprouvettes et dispositif proche d'une maquette moteur avec des tôles fully-process, 1999.

F. Ossart, D????gradation du comportement magn????tique des t????les lors de leur mise en ????uvre industrielle : mise en ????vidence exp????rimentale et mod????lisation, M????canique & Industries, vol.1, issue.2, pp.165-176, 2000.
DOI : 10.1016/S1296-2139(00)00106-8

F. Ossart, L. Hirsinger, and R. Billardon, Modelling of hysteresis losses in an electric machine stator subjected to assembling elastic stresses, 1999.

F. Ossart, E. Hug, O. Hubert, C. Buvat, and R. Billardon, Effect of punching on electrical steels: Experimental and numerical coupled analysis, IEEE Transactions on Magnetics, vol.36, issue.5, pp.3137-3140, 2000.
DOI : 10.1109/20.908712

R. Pallett and R. Lark, The use of tailored blanks in the manufacture of construction components, Journal of Materials Processing Technology, vol.117, issue.1-2, pp.249-254, 2001.
DOI : 10.1016/S0924-0136(01)01124-4

J. Pearsons, P. Squire, M. Maylin, and J. Gore, Biaxial stress effects on the magnetic properties of pure iron, IEEE Transactions on Magnetics, vol.36, issue.5, pp.3251-3253, 2000.
DOI : 10.1109/20.908758

G. Pérec, Experimental demonstration of the tomatotopic organization in the Sopranica (Cantatrix Sopranica D.). La librairie du XXe siecle, Seuil, 1991.

P. Popat, A. Ghosh, and N. Kishore, Finite-element analysis of the blanking process, Journal of Mechanical Working Technology, vol.18, issue.3, pp.269-282, 1989.
DOI : 10.1016/0378-3804(89)90086-7

B. Raka-blanche, C. N. Volume-mémoire-ingénieur, . R. Lmt-cachan, A. Rygal, N. Moses et al., Influence of cutting stress on magnetic field and flux density distribution in non-oriented electrical steels, Saanouni, J. Mariage, and A. Cherouat. Sheet metal cuting simulation by continuum damage mechanics. 5 th Esaform Conference on Material Forming, pp.215-216687, 2000.

M. Sablik, G. Burkhardt, and H. Kwun, Application of hysteresis modeling to magnetic techniques for monitoring biaxial stress, Proc. 11th DOE Basic Engineering Sciences Symposium, p.213, 1993.
DOI : 10.2172/335186

M. Sablik and D. Jiles, Coupled magnetoelastic theory of magnetic and magnetostrictive hysteresis, IEEE Transactions on Magnetics, vol.29, issue.4, pp.2113-2123, 1993.
DOI : 10.1109/20.221036

M. Sablik, L. Riley, G. Burkhardt, H. Kwun, P. Cannell et al., Micromagnetic model for biaxial stress effects on magnetic properties, Journal of Magnetism and Magnetic Materials, vol.132, issue.1-3, 1994.
DOI : 10.1016/0304-8853(94)90307-7

M. Samuel, FEM simulations and experimental analysis of parameters of influence in the blanking process, Journal of Materials Processing Technology, vol.84, issue.1-3, pp.97-106, 1998.
DOI : 10.1016/S0924-0136(98)00083-1

C. Schneider and J. Richardson, Biaxial magnetoelasticity in steels, Journal of Applied Physics, vol.53, issue.11, pp.8136-8138, 1982.
DOI : 10.1063/1.330341

Y. Stegeman, A. Goijaerts, D. Brokken, W. Brekelmans, L. Govaert et al., An experimental and numerical study of a planar blanking process, Journal of Materials Processing Technology, vol.87, issue.1-3
DOI : 10.1016/S0924-0136(98)00362-8

. Sussen, Identification et recalage des champs de contraintes résiduelles dans les structures, 1998.

. Szczepi´nskiszczepi´nski, Introduction to the mechanics of plastic forming of metals, Sijthoff & Noordhoff Int. Pub., Reissued, 1967.

E. Taupin, J. Breitling, W. Wu, and T. Altan, Material fracture and burr formation in blanking results of FEM simulations and comparison with experiments, Journal of Materials Processing Technology, vol.59, issue.1-2
DOI : 10.1016/0924-0136(96)02288-1

Y. Thesing, Mesure par corrélation des déplacements et des rotationsàrotations`rotationsà partir de figures granulaires, 1996.

J. Thompson and G. Hunt, A general theory of elastic stability, 1973.

S. Tiito, Magnetic methods In Handbook of Measurement of Residual Stresses, 1996.

S. Timoshenko and J. Goodier, Theory of elasticity, 1987.

G. Tomka, N. Murray, J. Gore, J. Earl, P. Squire et al., Effects of biaxial stress on martensitic steels, Journal of Magnetism and Magnetic Materials, vol.226, issue.230, pp.226-230980, 2001.
DOI : 10.1016/S0304-8853(00)01166-5