F. D. Forest and J. L. , Development and application of high matrix strength aluminiumboron, Materials Engineering Congress, 1969.

S. Gorsse, De nouvelles approches sur les matériaux composites à matrice de titane, 1999.

Y. L. Petitcorps, Caractérisations physico-chimique et mécanique de filaments CVD de carbure de silicium ou de bore: application aux matériaux composites 1D SiC/Ti- 6Al-4V, Thèse de l'université Bordeaux I (n°22). 1985. 4. GRD2-2000-30405, P.E.G., High Performance and Competitive New Titanium Reinforced Alloys For Aeronautic applications (NEWTIRAL), 2001.

Z. Y. Ma, J. B. , Y. X. Lu, M. Luo, and Y. X. Gao, Quench strengthening mechanism of AL???SiC composites, Scripta Metallurgica et Materialia, vol.29, issue.2, pp.225-229, 1993.
DOI : 10.1016/0956-716X(93)90313-H

J. Stohr and T. K. , Problèmes métallurgiques posés par la mise au point et le dévellopement de composites de solidification destinés à la réalisation d'aubes de turbines, Introduction aux matériaux composites, pp.263-313, 1979.

J. M. Quenisset, UNe nouvelle méthode de contrôle de la fusion en zone flottante. Application à la cristallogenèse et à l'élaboration de composite in situ, Thèse de l'université Bordeaux I (N°651), 1980.

B. P. Bewlay, H. A. , M. R. Jackson, W. J. Reeder, and J. A. Sutliff, Solidification processing of high temperature intermetallic eutectic-based alloys, Materials Science and Engineering: A, vol.192, issue.193, pp.192-193, 1995.
DOI : 10.1016/0921-5093(95)03299-1

O. M. Suarez, L. L. Lakshmi, and M. Gupta, Precipitation hardening of a novel aluminium matrix composite 49: p. 187-191. 10, situ preparation of TiB 2 reinforced Al based composites. Journam of Materials Processing Technology, pp.160-166, 1998.

Y. Chen and D. D. , In situ Al-TiB composite obtained by stir casting, Journal of Materials Science, vol.29, issue.2, pp.311-315, 1996.
DOI : 10.1007/BF01139145

A. K. Kuruvilla, K. S. , V. V. Bhanuprasad, and Y. R. Mahajan, Microstructure-property correlation in (XD) composites, Scripta Metallurgica et Materialia, vol.24, issue.5, pp.873-878, 1990.
DOI : 10.1016/0956-716X(90)90128-4

T. Fan, D. Z. , G. Yang, T. Shibayanagi, and M. Naka, Fabrication of in situ Al2O3/Al composite via remelting, Journal of Materials Processing Technology, vol.142, issue.2, pp.556-561, 2003.
DOI : 10.1016/S0924-0136(03)00659-9

B. Yang, F. W. , and J. S. Zhang, Microstructural characterization of in situ TiC/Al and TiC/Al???20Si???5Fe???3Cu???1Mg composites prepared by spray deposition, Acta Materialia, vol.51, issue.17, pp.4977-4989, 2003.
DOI : 10.1016/S1359-6454(03)00292-1

Y. , L. Petitcorps, L. A. , G. Salviat, S. Matar et al., The concept and the fabrication of a novel composite alloy. non publié. 16, Mater. Trans. A, vol.28, 1931.

H. Y. Wang, Q. C. , X. L. Li, J. G. Wang, Q. F. Guan et al., In situ synthesis of TiC from nanopowders in a molten magnesium alloy, -Situ formation of copper matrix composites by laser sintering. Mater. Sci. Eng, pp.1387-1392, 2002.
DOI : 10.1016/S0025-5408(03)00153-3

P. Y. Chevalier, Etude thermodynamique de l'obtention du monoborure de titane TiB a partir d'un solvant liquide, p.18, 1998.

J. T. Guo and Z. P. , Investigation of NiAl???TiB2 in situcomposites, Journal of Materials Research, vol.27, issue.04, pp.1083-1090, 1997.
DOI : 10.1007/BF00544181

T. Cheng and H. M. , High temperature x-ray diffraction investigation of nickel-rich NiAl and NiAl---TiB 2, Scripta Mater, vol.42, issue.4, pp.1399-1405, 1994.

S. Milenkovic and R. C. , Growth morphology of the NiAl-V in situ composites Interface shear properties and toughness of NiAl/Mo laminates, J. Mater. Proc. Tech. Acta Metall, issue.10, pp.45-4333, 1997.

S. M. Joslin, X. F. , B. F. Olivier, R. D. Noche, and J. , Fracture behaviour of directionally solidified NiAl-Mo and NiAl-V eutectics Vapodéposition chimique du bore. Application à l'étude des interactions fibre-matrice dans les matériaux composites à base titane et de fibre de bore, Mater. Sci. Eng. A, 1977.

R. Pailler, Les matériaux composites fibres de bore-titane. Essai de corrélation entre interactions chimiques fibres-matrice et caractéristiques mécaniques, Thèse de l'université Bordeaux I (n°616), 1979.

F. W. Crossman and A. S. , Unidirectionally solidified Ti-TiB and Ti-Ti5Si3 eutectic composites, Metall. Trans, issue.2, pp.1545-1555, 1971.

C. F. Yolton and J. H. , Evaluation of a discontinuously reinforced Ti-6Al-4V composite. in Titanium'95 : science and technology. 1995. Saint Petersbourg, Russie. 29, Microstructure development and fracture of in situ reinforced Ti-8.5Al-1B-1Si. Scripta Mater, pp.35-239, 1996.

Z. Fan and A. P. , Microstructural evolution in rapidly solidified Ti-7.5 Mn-0.5 B alloy, Acta Materialia, vol.44, issue.1, pp.93-110, 1996.
DOI : 10.1016/1359-6454(95)00148-0

X. Ma, C. L. , Z. Du, and W. Zhang, Thermodynamic assessment of the Ti???B system, Journal of Alloys and Compounds, vol.370, issue.1-2, pp.149-158, 2004.
DOI : 10.1016/j.jallcom.2003.09.017

Z. Fan, A. P. , L. Chandrasekaran, C. M. Ward, and . Close, Microstructural investigation of a rapidly solidified Ti-6Al-4V-1B-0.5Y alloy, Journal of Materials Science, vol.20, issue.7, pp.1653-1660, 1995.
DOI : 10.1007/BF00351593

S. Gorsse and D. B. , Mechanical properties of Ti-6Al-4V/TiB composites with randomly oriented and aligned TiB reinforcements Microstructure and tensile properties of mechanically alloyed Ti-6Al-4V with boron additions, Acta Mater. Mater. Sci. Eng. A, vol.51, issue.282, pp.2427-2442, 2000.

M. Kobayashi, K. F. , S. Susuki, and C. Ouchi, Manufacturing process and mechanical properties of fine TiB dispersed Ti???6Al???4V alloy composites obtained by reaction sintering, Materials Science and Engineering: A, vol.243, issue.1-2, pp.279-284, 1998.
DOI : 10.1016/S0921-5093(97)00814-9

Z. Fan, H. J. , A. P. Miodownik, T. Saito, and B. Cantor, Effect of Cl on microstructure and mechanical properties of in situ Ti/TiB MMCs produced by a blended elemental powder metallurgy method, Journal of Microscopy, vol.185, issue.2, pp.127-131, 1997.
DOI : 10.1046/j.1365-2818.1997.d01-622.x

T. Saito, H. T. , and T. Furuta, Hot Workability and mechanical properties of a TiB particle reinforced PM beta titanium matrix composite. in Titanium 95 : science and technology, 1995.

T. Saito, H. T. , and T. Furuta, Thermomechanical properties of P/M ?? titanium metal matrix composite, Materials Science and Engineering: A, vol.243, issue.1-2, pp.273-278, 1998.
DOI : 10.1016/S0921-5093(97)00813-7

T. Saito, T. F. , and H. Takamiya, Sintering behaviour and thermal stability of a TiB particle reinforced PM beta titanium matrix composite. in Titanium'95 : Science and Technology, 1995.

W. J. Lu, D. Z. , X. N. Zhang, R. J. Wu, T. Sakata et al., Microstructure and tensile properties of in situ (TiB+TiC)/Ti6242 (TiB:TiC=1:1) composites prepared by common casting technique, Materials Science and Engineering: A, vol.311, issue.1-2, pp.142-150, 2001.
DOI : 10.1016/S0921-5093(01)00910-8

T. S. Srivatsan, W. O. , and R. J. Lederich, Tensile deformation and fracture behaviour of a titanium-alloy metal-matrix composite, Composites Part A: Applied Science and Manufacturing, vol.28, issue.4, pp.365-376, 1997.
DOI : 10.1016/S1359-835X(96)00136-4

W. O. Soboyejo, R. J. , and S. M. Sastry, Mechanical behaviour of damage tolerant TiB whisker-reinforced in situ titanium matrix composites, Acta Metall. Mater, issue.8, pp.42-2579, 1994.

W. J. Lu, D. Z. , R. J. Wu, and H. Mori, Solidification paths and reinforcement morphologies in melt-processed (TiB + TiC)/Ti In Situ Composites, Metallurgical and Materials Transactions A, vol.16, issue.131, pp.3055-3063, 2002.
DOI : 10.1007/s11661-002-0290-3

J. Zhu, A. K. , T. Yamada, W. Shi, and K. Naganuma, Influence of boron addition on microstructure and mechanical properties of dental cast titanium alloys, Materials Science and Engineering: A, vol.339, issue.1-2, pp.53-62, 2003.
DOI : 10.1016/S0921-5093(02)00102-8

K. Geng, W. L. , D. Zhang, T. Sakata, and H. Mori, Tensile properties of in situ synthetized titanium matrix composites reinforced by TiB and Nd 2 O 3 at elevated temperature, p.24, 2003.

K. Geng, W. L. , Z. Yang, and D. Zhang, In situ preparation of titanium matrix composites reinforced by TiB and Nd2O3, Materials Letters, vol.57, issue.24-25, pp.4054-4057, 2003.
DOI : 10.1016/S0167-577X(03)00264-7

K. Geng, W. L. , and D. Zhang, Microstructure and tensile properties of in situ synthetized (TiB+Y2O3)/Ti composites at elevated temperature Self propagating high temperature combustion synthesis of TiB/Ti composites, Mater. Sci. Eng. A Mater. Sci. Eng. A, vol.348, issue.51, pp.1-7, 2003.

M. Cirakoglu, B. B. , and S. B. Bhaduri, Combustion synthesis processing of functionally graded materials in the Ti???B binary system, Journal of Alloys and Compounds, vol.347, issue.1-2, pp.259-265, 2002.
DOI : 10.1016/S0925-8388(02)00499-1

M. Cirakoglu, G. L. , and S. B. Bhaduri, Controlled combustion synthesis in the Ti???B system with ZrO2 addition, Materials Science and Engineering: A, vol.282, issue.1-2, pp.223-231, 2000.
DOI : 10.1016/S0921-5093(99)00721-2

J. Subrahmanyam and M. V. , Self-propagating high-temperature synthesis, Journal of Materials Science, vol.8, issue.1, pp.6249-6273, 1992.
DOI : 10.1007/BF00576271

A. G. Merzhanov, Y. L. Munir, R. J. Lederich, and W. O. Soboyejo, Combustion and Plasma Synthesis of High Temperature Materials, ed Engineering of damage tolerant in situ titanium matrix composites, 1990.

W. O. Soboyejo, R. J. , T. S. Srivatsan, and K. Reece, Mechanical properties of damage tolerant TiB whisker reinforced in situ titanium matrix composites, in Intrinsec and extrinsec fracture mechanism in inorganic composite systems, The minerals, pp.167-182, 1995.

T. Saito, A cost effective P/M Titanium matrix composite for automotile use, Adv. Perf. Mater, issue.2, pp.121-144, 1995.

W. O. Soboyejo, W. S. , T. S. Srivatsan, S. Dubey, Y. L. et al., An investigation of fatigue crack nucleation and growth in a Ti-6Al-4V/TiB in situ composite Fatigue crack growth in an in situ titanium matrix composite, Mechanics Mater. Mater. Sci. Eng. A, vol.36, issue.266, pp.141-159, 1999.

Y. T. Zhu, G. Z. , A. Manthiram, and Z. Eliezer, Strength analysis of random short fibre reinforced metal matrix composite materials Composite weakening and strengthenning of Ti/TiB(W) composites during steady-state creep at high temperature in the b-matrix region, J. Mater. Sci. Scripta Mater, vol.29, issue.50, pp.6281-6286, 1994.

K. Kawabata, E. S. , and K. Kuribayashi, High temperature deformation with diffusionnal and plastic accomodation in Ti/TiB whisker reinforce in situ composite, Acta Mater, issue.51, pp.1909-1922, 2003.

D. Alman and J. A. , The abrasive wear of sintered titanium matrix???ceramic particle reinforced composites, Wear, vol.225, issue.229, pp.225-229, 1999.
DOI : 10.1016/S0043-1648(99)00065-4

R. L. Herzog, E. A. Whisker-technology, H. Lewitt, and R. J. Conrad, The science, Technology and application of Titanium Effects of three interstitial solutes (N, O and C) on the mechanical properties of high purity alpha titanium, J.a. Promise. J. of Metals, vol.65, issue.188, pp.277-285, 1950.

H. T. Tsang, C. G. , and C. Y. Ma, Effects of volume fraction of reinforcement on tensile and creep properties of in-situ MMC, Scripta Materialia, vol.37, issue.9, pp.1359-1365, 1997.
DOI : 10.1016/S1359-6462(97)00251-0

E. Zhang, S. Z. , and B. Wang, Preparation and microstructure of in situ particle reinforced titanium matrix alloy, Journal of Materials Processing Technology, vol.125, issue.126, pp.125-126, 2002.
DOI : 10.1016/S0924-0136(02)00329-1

X. Zhang, W. L. , D. Zhang, and R. Wu, In situ technique for synthesizing (TiB+TiC)/Ti composites, Scripta Materialia, vol.41, issue.1, pp.39-46, 1999.
DOI : 10.1016/S1359-6462(99)00087-1

E. Streiff, Contribution à l'étude métallurgique du moulage de précision de petites pièces en titane et en Ti-6Al-4V, pp.97-106, 1997.

R. L. Saha, T. K. , R. D. Misra, and K. T. Jacob, On the evaluation of stability of rare earth oxides as face coats for investment casting of titanium, Metallurgical Transactions B, vol.12, issue.3, pp.559-568, 1990.
DOI : 10.1007/BF02667869

W. Wilhelmsen and A. P. , The influence of hydrofluoric acid and fluoride ion on the corrosion and passive behaviour of titanium, Electrochimica Acta, vol.32, issue.10, pp.32-1469, 1987.
DOI : 10.1016/0013-4686(87)85088-0

J. J. Kelly, The influence of fluoride ions on the passive dissolution of titanium, Electrochimica Acta, vol.24, issue.12, pp.1273-1282, 1979.
DOI : 10.1016/0013-4686(79)87084-X

E. M. Sutter, G. J. , and G. , The behaviour of titanium in nitric-hydrofluoric acid solutions, Corrosion Science, vol.30, issue.4-5, pp.4-5, 1990.
DOI : 10.1016/0010-938X(90)90051-6

S. Gorsse, Y. L. , S. Matar, and F. Rebillat, Investigation of the Young's modulus of TiB needles in situ produced in titanium matrix composite, Materials Science and Engineering: A, vol.340, issue.1-2, pp.80-87, 2003.
DOI : 10.1016/S0921-5093(02)00188-0

V. V. Stolyarov, Y. T. , I. V. Alexandrov, T. C. Lowe, and R. Z. Valiev, Influence of ECAP routes on the microstructure and properties of pure Ti, Materials Science and Engineering: A, vol.299, issue.1-2, pp.59-67, 2001.
DOI : 10.1016/S0921-5093(00)01411-8

V. V. Stolyarov, Y. T. , T. C. Lowe, and R. Z. Valiev, Microstructure and properties of pure Ti processed by ECAP and cold extrusion, Materials Science and Engineering: A, vol.303, issue.1-2, pp.82-89, 2001.
DOI : 10.1016/S0921-5093(00)01884-0

V. C. Nardonne and K. W. , On the strength of discontinuous silicon carbide reinforced aluminum composites, Scripta Metallurgica, vol.20, issue.1, pp.43-48, 1986.
DOI : 10.1016/0036-9748(86)90210-3

I. Aitchison, B. C. , C. Patiès, H. R. Wu, T. Sakata et al., Etude expérimentale du comportement en fluage et corrosion sous contrainte d'un titane non allié de grade 4 Application a un cas d'endommagement en service Microstructural characterization of TiB in in situ synthetized titanium matrix composites prepared by common casting technique, Ecole Nationale Supérieure des Mines de Saint Etienne, pp.83-87, 1972.

A. W. Bowen, The influence of crystallographic orientation on the fracture toughness of strongly textured Ti-6Al-4V, Acta Metallurgica, vol.26, issue.9, pp.1423-1433, 1978.
DOI : 10.1016/0001-6160(78)90157-8

A. W. Bowen, The preference for <11-20> slip in alpha based titanium alloys. in Sixth world conference on titanium Anisotropy of fracture toughness in textured titanium Ti- 6Al-4V alloy, Metall. Trans. A, issue.9, pp.1113-1124, 1978.

H. P. Penel and J. B. Rao, Characterization and mechanical properties of in situ synthetized Ti 5 Si 3 /TiAl composites, Science et vie Mater. Sci. Eng. A, issue.356, pp.208-218, 1997.

D. Hu, Effect of composition on grain refinement in TiAl-based alloys, Intermetallics, vol.9, issue.12, pp.1037-1043, 2001.
DOI : 10.1016/S0966-9795(01)00079-6