I. Chapitre, Validations et simulations numériques : Application au cas de spécimens en bétons à haute température, p.130

I. Figure, Evolution du module élastique d'un béton réfractaire (8D) et de sa matrice en fonction de la température, 2000.

1. Au-delà-de, le module élastique du béton et de sa matrice réaugmente grâce à la recristallisation des aluminates de calcium. En revanche une diminution à 1200°C est observée due à l

H. Abe-abe, T. Kawahara, . Ito, and A. Haraguchi, Influence factors of elevated temperatures on thermal properties and inelastic behaviour of concret, Concrete for Nuclear Reactors, pp.34-40, 1972.

Y. Ande-anderberg and S. Thelandersson, Stress and deformation characteristics of concrete at elevated temperatures. Part II: Experimental investigation and material behviour model, Bulletin, vol.54, 1976.

F. Armero and J. C. Simo, A new unconditionally stable fractional step method for non-linear coupled thermomechanical problems, A thermo-mechanical damage model of concrete at elevated temperatur Proc. FRAMCOS 2, pp.737-766, 1992.
DOI : 10.1002/nme.1620350408

Z. P. Bazant and B. H. Oh, Crack band theory for fracture of concrete in Materials and structures, pp.155-177, 1983.

P. Pfeiffer, Shear fracture Tests of concrete'' materials and structures, Tesearch and testing( RILEM, Paris) V, Z.P, vol.19, issue.110, pp.111-121, 1986.

B. Zdenek, P. Prat, and C. , Effect of temperature and humidity on fracture Energy of concrete, ACI Materials Journal. Technical paper Title, pp.85-117, 1988.

Z. P. Bazant and M. Kaplan, Concrete at high temperature: material behaviour and mathematical modelling. Londonlonman concerte design and conconstruction series, 1996.

D. P. Bentz, The virtual cement and concrete testing laboratory consortium annual report 2001. National institute of standards and technology, US department of commerce, 2001.

N. Zhang, C. J. Bicanic, D. V. Pearce, and . Phillips, Relationship between brittleness and moisture loss of concrete exposed to high temperatures, Cement and Concrete Research, vol.32, issue.3, pp.363-371, 2002.
DOI : 10.1016/S0008-8846(01)00684-6

D. Cambell-allen and P. M. Dessai, The influence of agregate on the behavior of concrete at elevated températures. Nuclear engineering and design, Effect of transient high temperature on high strength concerte. ACI Materials Journal, pp.65-77, 1967.

J. Cubaud and M. Murat, Évolution des pâtes de ciment portland CPAC entre 25 et 1000°C ,Ciments et bétons, pp.609-610, 1966.

D. Larrard, F. Belloc, A. Boulay, C. Kaplan, D. Renwez et al., Formulations de référence ? Propriétés mécaniques jusqu'à l'age de 90 jours, 1996.

W. P. Dias, G. A. Khoury, and P. J. Sullivane, Mechanical properties of hardened cement paste exposed to temperature up to 700°C, Diederichs U., Jumpanen U-M. and Penttala. V. Behaviour of high temperatures, pp.160-166, 1990.

G. L. England, G. R. Khan, and S. , A, Influence of high temperature on the water content, permeability and pore pressure in concret, Proc. 10th SMRT, Anaheim(California), pp.31-36, 1989.

R. Felecitti and P. G. Gambarova, On the residual proprieties of high performance siliceous concrete exposed to high temperatures. Mechanics of Quasi-Brittle materials and structures, pp.167-186, 1999.

S. Fichant, Endommagement et anisotropie induite du béton de structures : Modélisation approchée, Thèse de Doctorat de l'ENS-Cachan, 1996.

D. Fokwa, Matériaux hétérogène : Analyse expérimentale et modélisation numérique par une approche hiérarchique, Thèse de Doctorat de l'université de Paris 6, 1992.

J. M. Franssen, Etudes du comportement au feu des structure mixtes acier-béton, p.267, 1987.

E. T. Garboczi, Permeability, diffusivity, and microstructural parameters : a critical review, Cement and concrete research, pp.591-601, 1990.

G. F. Mounajed-g and . A. Ben, Digital concrete : a multi-scale approach for the concrete behavior, International Conference of Computational Methods in Sciences and Enginnering 2003, pp.12-16, 2003.

T. Hansen, C. Eriksson, and L. , Temperature change n behaviour of cement past, mortar and concrete under load, Journal of American Concrete Institute, vol.63, pp.4-489, 1966.

T. Harada, J. Takeda, S. Yamane, and F. Furumura, Strength, elasticity and thermal properties of concrete subjected to elevated temperatures. Concrete for nuclear reactors, pp.179-203, 1973.

P. Kalifa and F. Et-menneteau, Mesures de pression, température et perte en masse dans les bétons à hautes températures, 2000.

P. Kalifa and M. Tsimbrovska, Comportement des BHP à hautes températures, État de la question et résultats expérimentaux, p.3078, 1998.

G. A. Khoury, Mechanical behaviour at high temperature. Final report , Brite Euram III, HITECO programme BE-95-1158, 1999.

J. Knott, Fundamentals of fracture Mechanics, Butter-worths, p.273, 1973.

V. M. Malhotra, H. S. Wilson, and K. E. Painter, Permformance of Gravelstone Concrete Incorporating Silica Fume at Elevated Temperature, pp.1051-1076, 1989.

J. Maréchal, Variations of the modulus of elasticity and Poisson's ratio with temperature, Concrete for Nuclear Reactors, ACI SP-34, pp.495-503, 1972.

J. Mazars, Application de la mécanique de l'endommagement au comportement non linéaire et à la rupture du béton de structure, Thèse de Doctorat de l'Université Paris6, p.152, 1984.

D. Mitkova, High temperature Resistance of concrete with Scattered Reinforcement. Stavebniky Casopis. 36, pp.161-170, 1988.

G. Mounajed and . Symphonie, Code de calcul général aux éléments finis, 1991.

G. Mounajed and W. Obeid, Thermo-hygro-mechanical coupling of saturated and nonsaturated porous media, modelling by using finite element method » Workshop on modelling of deterioration in composite building components due to heat and mass transfer, pp.22-23, 1998.

G. Mounajed and W. Obeid, Un modèle thermo-hygro-mécanique pour la simulation du comportement au feu des bétons. ?première conférence internationale Albert CAQUOT, modélisation et simulation en génie civile : de la pratique à la théorie, ENPC, pp.3-5, 2001.
DOI : 10.1080/12795119.2003.9692435

G. Mounajed, Exploitation du nouveau modèle béton numérique dans SYMPHONIE. Cahiers du CSTB, n°3421 septembre, 2002.

G. Mounajed, H. Boussa, and A. Menou, Thermal mechanical damage of concrete exposed to high temperature, First International Conference on Applications of Porous Media Jerba, 2002.

G. Mounajed, H. Ung-quoc, and H. Boussa, Develpment of a new concrete damage model " MODEV " in SYMPHONIE F.E. code: Application to metallic anchor bolts. The Second Biot Conference on Poromechanics, pp.917-923, 2002.

H. Nakhlé, D. De, . Mocad-cstb, and J. Enpc, Homogénisation du comportement thermomécanique des bétons à hautes performances par le modèle Béton Numérique » de Symphonie Une approche thermo-élasto-plastique endommageable, Nechnech, W. Contribution à l'étude numérique du comportement du béton et des structures en béton armé soumises à des sollicitations thermiques et mécaniques couplées Thèse de génie civil, p.192, 2000.

N. A. Noumowé, Effet de hautes températures (20°C-600°C) sur le béton, 1995.

N. A. Noumowé, S. Aggoun, and R. Cabrillac, Influence du type de granulats sur les propriétés de bétons à matrice hautes performances soumis à une température élevée, Annales du BTP, vol.5, 2001.

L. Parrot, A study of transitionnal thermal creep in hardened cement paste. Magazine of Concrete Research, pp.99-103, 1979.

P. Petersson, Fracture energy of concrete: Method of determination, Cement and Concrete Research, vol.10, issue.1, pp.78-79, 1980.
DOI : 10.1016/0008-8846(80)90054-X

J. Piasta, Heat deformations of cement paste phases and the microstructure of cement paste, Matériaux et Constructions, N°102, pp.415-420, 1984.
DOI : 10.1007/BF02473981

P. Pimienta, Évolution des caractéristiques des BHP soumis à des températures élevées (Tranche 1), résistances en compression et modules d'élasticité, 1999.

F. S. Rostasy, C. Ehm, and K. Heinrichsmeyer, Structural altération in concrete due to thermal ans mechanical stresses, Proceeding of the first International RILEM Congress, pp.92-99, 1987.

S. P. Shah and A. Maji, Experimental observation of cracking and damage, 1988.

I. Soles, J. A. Geller, and L. B. , Experimental studies relating mineralogical and petrographic features to thermal piercing of rocks, Mines Branch Technical Bulletin, pp.15-29, 1984.

F. Simonin, J. Stabler, G. J. Baker, G. Baker, G. Heinfling et al., Comportement thermomécanique de bétons réfractaires alumineux contenant du spinelle du magnésium Thèse de Doctorat de l'INSA de Lyon On the form of free energy and specific heat in coupled thermoelasticity with isotropic damage Effect of high temperature on the fracture energy of concrete, proc. FRAMCOS III, pp.165-4691, 1998.

P. J. Sullivan and M. P. Poucher, The influence of temperature on the physical proprities of concrete and mortar in the range 20 to 400°C. Tempertaure & Concrete, pp.103-135, 1971.

R. A. Vonk, Strain softening of concrete loaded in compression, 1992.

. Dissertation, Eindhoven university of technologie, p.163, 1992.

K. Wu, B. Chen, and D. Zhang, Effect of coarse aggregate type on mechanical properties of high-performance concrete, Cement and Concrete Research, vol.31, issue.10, pp.1421-1425, 2001.
DOI : 10.1016/S0008-8846(01)00588-9