T. Kodas and M. , Hampden-Smith: « The chemistry of metal CVD, 1994.

M. Kuznietz, Z. Livne, C. Cotler, and G. Erez, Effect of liquid uranium on tungsten foils up to 1350??C, Journal of Nuclear Materials, vol.160, issue.1, pp.69-74, 1988.
DOI : 10.1016/0022-3115(88)90009-8

. S. Boiteau-auvray, « Quels sont les enjeux d'une barrière de diffusion de carbure de titane entre le tungstène et le carbure de silicium, sur l'élaboration par dépôt chimique en phase vapeur, et sur les propriétés mécaniques du renfort filamentaire de SiC?, Thèse : ICMCB - CNRS, p.1832, 1997.

-. J. Fromentin-cnrs, U. Bordeaux-i, and . No, « Réalisation et comportement d'interphases à gradient de composition et de propriétés: Application au matériau composite SiC, Thèse : ICMCB, p.1675, 1997.

V. H. Holleck and . Schier, Multilayer PVD coatings for wear protection, Surface and Coatings Technology, vol.76, issue.77, pp.76-77, 1995.
DOI : 10.1016/0257-8972(95)02555-3

. H. Holleck, Material selection for hard coatings, Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films, vol.4, issue.6, pp.2661-2669, 1986.
DOI : 10.1116/1.573700

P. Villards, A. Prince, and H. , Okamoto: « Handbook of ternary alloy phase diagrams, 1995.

. T. Hanabusa, X-RAY MEASUREMENT OF STRESSES IN DEPOSITED THIN FILM WITH FIBER TEXTURE, Journal of the Society of Materials Science, Japan, vol.48, issue.6Appendix, pp.63-73, 1999.
DOI : 10.2472/jsms.48.6Appendix_63

T. S. Ejiri, Y. Sasaki, and . Hirose, X-ray stress measurement for TiN films evaporated by PVD, Thin Solid Films, vol.307, issue.1-2, pp.178-182, 1997.
DOI : 10.1016/S0040-6090(97)00321-0

H. T. Murotani, T. Hirose, K. Sasaki, and . Okazaki, Study on stress measurement of PVD-coating layer, Thin Solid Films, vol.377, issue.378, pp.377-378, 2000.
DOI : 10.1016/S0040-6090(00)01280-3

J. S. Ejiri, T. He, and Y. Sasaki, Hirose: X-ray stress measurement for <110>-oriented TiC films, Mater. Sci. Res. Intern, vol.6, pp.237-242, 2000.

B. S. Eroglu and . Gallois, Residual stresses in chemically vapour deposited coatings in the Ti-C-N system, J. de Physique IV C3, pp.155-162, 1993.

H. Okamoto, « Desk handbook Phase Diagrams for binary alloys, 2000.

A. K. Dua and R. P. Agarwala, Coatings for Reducing Plasma Contamination and Power Loss in Fusion Reactor, Materials Science Forum, vol.246, pp.225-238, 1997.
DOI : 10.4028/www.scientific.net/MSF.246.225

K. Vandierendonck and M. Van-stappen, Study of the performance of PVD and PCVD coated cermets for different cutting applications, Surface and Coatings Technology, vol.97, issue.1-3, pp.218-223, 1997.
DOI : 10.1016/S0257-8972(97)00552-5

S. Chatterjee and S. Chandrashekhar, Deposition Methods, Properties and Metal Cutting Applications of Ceramic Films, Key Engineering Materials, vol.114, pp.67-104, 1996.
DOI : 10.4028/www.scientific.net/KEM.114.67

R. Porat and Y. Cassuto, A comparison between CVD and PVD coated cemented carbide cutting tools, J. de Physique IV C5, pp.803-810, 1989.
URL : https://hal.archives-ouvertes.fr/jpa-00229581

I. Yoshizawa, M. Fukutomi, and K. Kamada, Residual stress in coated low-Z films of TiC and TiN: III. PVD coated films, Journal of Nuclear Materials, vol.123, issue.1-3, pp.122-123, 1984.
DOI : 10.1016/0022-3115(84)90262-9

Y. T. Abe, K. Murakami, S. Obara, K. Hiroki, T. Nakamura et al., Development of TiC coated wall materials for JT-60, Journal of Nuclear Materials, vol.133, issue.134, pp.754-759, 1985.
DOI : 10.1016/0022-3115(85)90251-X

H. Holleck, H. Leiste, E. Nold, H. Schulz, and A. Skokan, Multiphase ceramic materials and coatings for fusion reactor applications, Journal of Nuclear Materials, vol.155, issue.157, pp.155-157, 1988.
DOI : 10.1016/0022-3115(88)90243-7

. R. Ahlroth, Effect of TiC and TiN diffusion barriers on tensile and fatigue properties of W fibre-reinforced Ni composites, High Temperature Technology, vol.2, issue.1, pp.43-47, 1984.
DOI : 10.1080/02619180.1984.11753240

W. S. Zhang and . Zhu, TiN coating of tool steels: a review, Journal of Materials Processing Technology, vol.39, issue.1-2, pp.165-177, 1993.
DOI : 10.1016/0924-0136(93)90016-Y

H. J. Kohlscheen, P. Stock, and . Mayr, Substoichiometric titanium nitride coatings as machinable surfaces in ultraprecision cutting, Surface and Coatings Technology, vol.120, issue.121, pp.120-121, 1999.
DOI : 10.1016/S0257-8972(99)00368-0

B. A. Movchan and S. V. Demchishin, Investigation of the structure and properties of thick vacuum-deposited films of nickel, tungsten, alumina and zirconium dioxide, Fiz. Met. Metalloved, vol.28, pp.653-660, 1969.

. J. Thornton, High Rate Thick Film Growth, Annual Review of Materials Science, vol.7, issue.1, pp.239-260, 1977.
DOI : 10.1146/annurev.ms.07.080177.001323

K. G. Sheppard and S. Nakahara, The microstructure and morphology of thin films, Process. Advanced Mater, vol.1, pp.27-39, 1991.

W. D. Cheng, M. H. Sun, and . Hon, The morphology and structure of chemically vapour-deposited Ti(C,N) coatings, Thin Solid Films, vol.146, issue.1, pp.45-53, 1987.
DOI : 10.1016/0040-6090(87)90338-5

K. Nakamura, Y. Fukube, and K. Inagawa, The Application of TiC and TiN Thick Films by PVD Processes, Proc. of the 3rd Intern. Conf. on Titanium, pp.2245-2253, 1982.
DOI : 10.1007/978-1-4757-1758-7_80

F. J. Peyre, J. J. Rohart, and . Tessier, Mechanical Properties of TiN and TiC coatings using PVD and CVD, Intern. Semin. on Plasma Heat Treatment, pp.265-273, 1987.

G. P. Leclair, J. S. Berera, and . Moodera, Titanium nitride thin films obtained by a modified physical vapor deposition process, Thin Solid Films, vol.376, issue.1-2, pp.9-15, 2000.
DOI : 10.1016/S0040-6090(00)01192-5

J. D. Wolfe and . Singh, Titanium carbide coatings deposited by reactive ion beam-assisted, electron beam???physical vapor deposition, Surface and Coatings Technology, vol.124, issue.2-3, pp.142-153, 2000.
DOI : 10.1016/S0257-8972(99)00644-1

J. M. Lopez, F. J. Gordillo-vazquez, M. Fernandez, J. M. Albella, D. Caceres et al., Investigation of TiC thin films synthesised by low energy IBAD from electron evaporation of TiC powder, Applied Surface Science, vol.172, issue.1-2, pp.110-116, 2001.
DOI : 10.1016/S0169-4332(00)00835-7

J. T. Zehnder and . Patscheider, Nanocomposite TiC/a???C:H hard coatings deposited by reactive PVD, Surface and Coatings Technology, vol.133, issue.134, pp.133-134, 2000.
DOI : 10.1016/S0257-8972(00)00888-4

A. A. Voevodin, M. A. Capano, S. J. Laube, M. S. Donley, and J. S. Zabinski, Design of a Ti/TiC/DLC functionally gradient coating based on studies of structural transitions in Ti???C thin films, Thin Solid Films, vol.298, issue.1-2, pp.107-115, 1997.
DOI : 10.1016/S0040-6090(96)09145-6

L. Karlsson, L. Hultman, M. P. Johansson, J. Sundgren, and H. Ljungcrantz, Growth, microstructure, and mechanical properties of arc evaporated TiCxN1???x (0???x???1) films, Surface and Coatings Technology, vol.126, issue.1, pp.1-14, 2000.
DOI : 10.1016/S0257-8972(00)00518-1

M. Kawamura, Y. Abe, H. Yanagisawa, and K. Sasaki, Characterization of TiN films prepared by a conventional magnetron sputtering system: influence of nitrogen flow percentage and electrical properties, Thin Solid Films, vol.287, issue.1-2, pp.115-119, 1996.
DOI : 10.1016/S0040-6090(96)08749-4

Y. J. Huang, G. Tsai, and . Yu, Effect of processing parameters on the microstructure and mechanical properties of TiN film on stainless steel by HCD ion plating, Thin Solid Films, vol.355, issue.356, pp.355-356, 1999.
DOI : 10.1016/S0040-6090(99)00670-7

H. Suda, K. Kawasaki, S. Doi, and . Hiraishi, Formation and properties of TiC thin films by pulsed Nd/YAG laser deposition, Thin Solid Films, vol.374, issue.2, pp.282-286, 2000.
DOI : 10.1016/S0040-6090(00)01166-4

S. Inoue, Y. Wada, and K. Koterazawa, Deposition of TiC films by dual source dc magnetron sputtering, Vacuum, vol.59, issue.2-3, pp.735-741, 2000.
DOI : 10.1016/S0042-207X(00)00341-9

L. Kuo and P. Shen, On the condensation and preferred orientation of TiC nanocrystals ??? effects of electric field, substrate temperature and second phase, Materials Science and Engineering: A, vol.276, issue.1-2, pp.99-107, 2000.
DOI : 10.1016/S0921-5093(99)00504-3

T. S. Inoue, H. Ohba, K. Takata, and . Koterazawa, Effect of partial pressure on the internal stress and the crystallographic structure of r.f. reactive sputtered Ti-N films, Thin Solid Films, vol.343, issue.344, pp.343-344, 1999.
DOI : 10.1016/S0040-6090(98)01632-0

M. Van-stappen, K. D. Bruyn, C. Quaeyhaegens, L. Stals, and V. Poulek, Deposition and properties of thick corrosion and wear-resistant Ti 2 N coatings, Surf. Coat. Technol, pp.74-75, 1995.

J. Sundgren, B. Johansson, H. T. Hentzell, and S. Karlsson, Mechanisms of reactive sputtering of titanium nitride and titanium carbide III: Influence of substrate bias on composition and structure, Thin Solid Films, vol.105, issue.4, pp.385-393, 1983.
DOI : 10.1016/0040-6090(83)90320-6

A. R. Bahl, M. Kumar, D. Vedawyas, and . Patel, Synthesis and characterization of TiC and TiCN coatings, Applied Physics A: Materials Science & Processing, vol.69, issue.7, pp.643-646, 1999.
DOI : 10.1007/s003390051495

A. R. Phani, J. E. Krzanowski, and J. J. , Structural and mechanical properties of TiC and Ti???Si???C films deposited by pulsed laser deposition, Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films, vol.19, issue.5, pp.2252-2258, 2001.
DOI : 10.1116/1.1382876

D. S. Yang, I. Lewis, J. Wadsworth, J. S. Cawley, W. Brooks et al., Investigation of substoichiometric titanium nitride grown by unbalanced magnetron sputtering, Surface and Coatings Technology, vol.131, issue.1-3, pp.228-233, 2000.
DOI : 10.1016/S0257-8972(00)00828-8

E. B. Matthes, J. Broszeit, H. Aromaa, S. P. Ronkainen, A. Hannula et al., Corrosion performance of some titanium-based hard coatings, Surface and Coatings Technology, vol.49, issue.1-3, pp.489-495, 1991.
DOI : 10.1016/0257-8972(91)90105-6

T. Hayashi, A. Matsumuro, M. Muramatsu, Y. Takahashi, and K. Yamaguchi, Synthesis of Ti-N thin films prepared by dynamic ion mixing technique and their mechanical properties, Thin Solid Films, vol.349, issue.1-2, pp.199-204, 1999.
DOI : 10.1016/S0040-6090(99)00241-2

H. T. Ikeda and . Satoh, Phase formation and characterization of hard coatings in the Ti???Al???N system prepared by the cathodic arc ion plating method, Thin Solid Films, vol.195, issue.1-2, pp.99-110, 1991.
DOI : 10.1016/0040-6090(91)90262-V

V. Poulek, J. Musil, V. Valvoda, and L. Dobiasova, Ti???N films created in close vicinity of transition from ??-Ti(N) to ??-TiNx phase, Materials Science and Engineering: A, vol.140, pp.660-665, 1991.
DOI : 10.1016/0921-5093(91)90492-6

L. J. Pelleg, S. Zevin, and . Lungo, Reactive-sputter-deposited TiN films on glass substrates, Thin Solid Films, vol.197, issue.1-2, pp.117-128, 1991.
DOI : 10.1016/0040-6090(91)90225-M

J. U. Oh and . Je, Effects of strain energy on the preferred orientation of TiN thin films, Journal of Applied Physics, vol.74, issue.3, pp.1692-1696, 1993.
DOI : 10.1063/1.355297

J. L. Hultman, J. E. Sundgren, D. B. Greene, I. Bergstrom, and . Petrov, ion irradiation during TiN deposition by reactive magnetron sputtering: Effects on microstructure and preferred orientation, Journal of Applied Physics, vol.78, issue.9, pp.5395-5403, 1995.
DOI : 10.1063/1.359720

K. B. Wendler and . Jakubowski, Vacuum annealing studies of thin TiC layers on steels, Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films, vol.6, issue.1, pp.93-98, 1988.
DOI : 10.1116/1.574975

Y. S. Fortuna, A. J. Sharkeev, J. N. Perry, I. A. Matossian, and . Shulepov, Microstructural features of wear-resistant titanium nitride coatings deposited by different methods, Thin Solid Films, vol.377, issue.378, pp.377-378, 2000.
DOI : 10.1016/S0040-6090(00)01438-3

R. F. Bunshah, A. H. Shabaik, R. Nimmagadda, and J. Covy, Machining studies on coated high speed steel tools, Machining studies on coated high speed steel tools, pp.453-462, 1977.
DOI : 10.1016/0040-6090(77)90232-2

Z. I. Yoshizawa, K. Kabeya, and . Kamada, Residual stress in coated low-z films of TiC and TiN: II. correlation of residual stress with microstructure, Journal of Nuclear Materials, vol.123, issue.1-3, pp.122-123, 1984.
DOI : 10.1016/0022-3115(84)90261-7

B. W. Sloof, R. Kooi, T. H. Delhez, E. J. De-keijser, and . Mittemeijer, Diffraction analysis of nonuniform stresses in surface layers: Application to cracked TiN coatings chemically vapor deposited on Mo, Journal of Materials Research, vol.16, issue.55, pp.1440-1457, 1996.
DOI : 10.1016/0040-6090(85)90321-9

Z. J. Echigoya, A. Liu, S. Imamura, and . Takatsu, Transmission electron microscopy studies of growth and interface structure of chemically vapour deposited TiC and TiN films on WC???Co alloy subsrates, Thin Solid Films, vol.198, issue.1-2, pp.293-300, 1991.
DOI : 10.1016/0040-6090(91)90347-Z

M. H. Leiste, V. Stüber, H. Schier, and . Holleck, Microstructural Characterisation of TiC-TiN Gradient Coatings Deposited by Non-Reactive Magnetron Sputtering, Materials Science Forum, vol.308, issue.311, pp.308-311, 1999.
DOI : 10.4028/www.scientific.net/MSF.308-311.467

L. F. Shieu, Y. C. Cheng, J. H. Sung, G. P. Huang, and . Yu, Characterization of the ion-plated TiN on AISI 304 stainless steel by energy filtering transmission electron microscopy, Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films, vol.15, issue.4, pp.2318-2322, 1997.
DOI : 10.1116/1.580741

W. Q. Luo, L. A. Rainforth, I. Donohue, W. Wadsworth, and . Münz, Tribological investigation of TiAlCrN and TiAlN/CrN coatings grown by combined steered-arc/unbalanced magnetron deposition, Vacuum, vol.53, issue.1-2, pp.123-126, 1999.
DOI : 10.1016/S0042-207X(98)00406-0

L. Vandenbulcke, Thermodynamic approach to the chemical vapour deposition of nonstoichiometric titanium carbide at 1300-1500 K; comparison with experimental results, Proc.8th Internat. Conf. on CVD, pp.32-43, 1981.

H. Jonsson and H. E. Hintermann, Supply of carbon to a CVD TiC-layer on cemented carbides, Proc. of the 3rd Europ. Conf. on CVD, xi+263, pp.200-207, 1980.

H. K. Stjernberg, H. E. Gass, and . Hintermann, The rate of chemical vapor deposition of TiC, Thin Solid Films, vol.40, pp.81-88, 1977.
DOI : 10.1016/0040-6090(77)90105-5

K. T. Takahashi, K. Sugiyama, and . Tomita, The Chemical Vapor Deposition of Titanium Carbide Coatings on Iron, Journal of The Electrochemical Society, vol.114, issue.12, pp.1230-1235, 1967.
DOI : 10.1149/1.2426456

J. Subrahmanyam, A. K. Lahiri, and K. P. Abraham, Kinetics of Chemical Vapor Deposition, Journal of The Electrochemical Society, vol.127, issue.6, pp.1394-1399, 1980.
DOI : 10.1149/1.2129905

D. G. Kim, J. S. Yoo, and J. S. Chun, Effect of deposition variables on the chemical vapor deposition of TiC using propane, Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films, vol.4, issue.2, pp.219-221, 1986.
DOI : 10.1116/1.573474

C. N. Popovska, V. K. Drothler, H. Wunder, G. Gerhard, and . Emig, Investigations on TiN, TiC and Ti(CN) obtained by chemical vapour deposition, J. de Physique IV, vol.9, pp.437-444, 1999.

J. N. Lindström and S. , Amberg: 3rd Int The American Nuclear Society, Conf. on Chem. Vap. Dep, pp.115-132, 1973.

B. S. Eroglu and . Gallois, Growth and structure of TiC coatings chemically vapour deposited on graphite substrates, Journal of Materials Science, vol.22, issue.C3, pp.1754-1759, 1995.
DOI : 10.1007/BF00351606

M. Lee and M. H. Richman, Chemical Vapor Deposition of a TiC Coating on a Cemented-Carbide Cutting Tool, Journal of The Electrochemical Society, vol.120, issue.7, pp.993-996, 1973.
DOI : 10.1149/1.2403614

L. E. Haupfear and . Schmidt, Kinetics and Multiple Steady States in the Chemical Vapor Deposition of Titanium Carbide, Journal of The Electrochemical Society, vol.140, issue.6, pp.1793-1801, 1993.
DOI : 10.1149/1.2221644

B. S. Eroglu and . Gallois, Texture analyses of chemically vapour deposited coatings in the Ti-C-N system by wide film Debye-Scherrer X-ray diffraction technique, J. de Physique IV C3, pp.177-182, 1993.

I. Y. Konyashin, The influence of Fe-group metals on the CVD of titanium carbide, Chemical Vapor Deposition, vol.43, issue.5, pp.199-208, 1996.
DOI : 10.1002/cvde.19960020509

B. S. Eroglu and . Gallois, Growth and structure of TiCxNy coatings chemically vapour deposited on graphite substrates, Journal of Materials Science, vol.32, issue.1, pp.207-213, 1997.
DOI : 10.1023/A:1018560107109

. D. Lespiaux, Processus de nucléation/croissance et caractérisation microstructurale de céramiques base SiC obtenues par CVD/CVI dans le système Si-C-H-Cl, Thèse : ENSPCB, BORDEAUX I, No. d'ordre, p.766, 1992.

M. L. Pearce and W. Marek, Formation of silicon and titanium carbides by chemical vapour deposition, J. Electrochem. Soc, vol.51, pp.84-87, 1968.

L. Vandenbulcke, Thermodynamic approach to the chemical vapour deposition of nonstoichiometric titanium carbide at 1300-1500 K; comparison with experimental results, Proc.8th Internat. Conf. on CVD, pp.32-43, 1981.

. S. Boiteau-auvray, « Quels sont les enjeux d'une barrière de diffusion de carbure de titane entre le tungstène et le carbure de silicium, sur l'élaboration par dépôt chimique en phase vapeur, et sur les propriétés mécaniques du renfort filamentaire de SiC?, Thèse : ICMCB - CNRS, p.1832, 1997.

H. K. Stjernberg, H. E. Gass, and . Hintermann, The rate of chemical vapor deposition of TiC, Thin Solid Films, vol.40, pp.81-88, 1977.
DOI : 10.1016/0040-6090(77)90105-5

E. A. Haupfear and L. D. Schmidt, Kinetics and Multiple Steady States in the Chemical Vapor Deposition of Titanium Carbide, Journal of The Electrochemical Society, vol.140, issue.6, pp.1793-1801, 1993.
DOI : 10.1149/1.2221644

M. F. Teyssandier and . Allendorf, Thermodynamics and Kinetics of Gas-Phase Reactions in the Ti-Cl-H System, Journal of The Electrochemical Society, vol.145, issue.6, pp.2167-2178, 1998.
DOI : 10.1149/1.1838613

J. W. Chen and . Roberts, Surface chemistry of TiCl 4 on W(100), Surf, Science, vol.359, issue.1- 3, pp.93-106, 1996.

P. J. Dekker, H. J. Van-der-put, J. Veringa, and . Schoonman, A Kinetic Study of Titanium Nitride Chemical Vapor Deposition Using Nitrogen, Hydrogen, and Titanium Tetrachloride, Journal of The Electrochemical Society, vol.141, issue.3, pp.787-795, 1994.
DOI : 10.1149/1.2054812

. Ch.-ch, T. Jiang, T. Goto, and . Hirai, Non-stoichiometry of titanium nitride plates prepared by chemical vapour deposition, J. Alloys Comp, vol.190, pp.197-200, 1993.

]. A. Bouteville, L. Imhoff, and J. C. Remy, Thermodynamics of the Formation of TiN from TiCl[sub 4]-NH[sub 3]-H[sub 2] on a Patterned Oxidized Silicon Substrate, Journal of The Electrochemical Society, vol.143, issue.10, pp.3251-3256, 1996.
DOI : 10.1149/1.1837193

B. Drouin-ladouce, J. P. Piton, and L. Vandenbulcke, CVD OF TITANIUM CARBIDE AT MODERATE TEMPERATURE FROM TITANIUM SUBCHLORIDES, Le Journal de Physique Colloques, vol.50, issue.C5, pp.367-376, 1989.
DOI : 10.1051/jphyscol:1989544

URL : https://hal.archives-ouvertes.fr/jpa-00229567

K. Nakamura, Y. Fukube, and K. Inagawa, The Application of TiC and TiN Thick Films by PVD Processes, Proc. of the 3rd Intern. Conf. on Titanium, pp.2245-2253, 1982.
DOI : 10.1007/978-1-4757-1758-7_80

D. E. Wolfe and J. Singh, Titanium carbide coatings deposited by reactive ion beam-assisted, electron beam???physical vapor deposition, Surface and Coatings Technology, vol.124, issue.2-3, pp.142-153, 2000.
DOI : 10.1016/S0257-8972(99)00644-1

Y. N. Kikuchi, A. Oosawa, and . Nishiyama, Titanium nitride coating by plasma CVD, Proc.9th Int. Conf. on CVD, pp.728-744, 1984.

. S. Boiteau-auvray, « Quels sont les enjeux d'une barrière de diffusion de carbure de titane entre le tungstène et le carbure de silicium, sur l'élaboration par dépôt chimique en phase vapeur, et sur les propriétés mécaniques du renfort filamentaire de SiC?, Thèse : ICMCB - CNRS, p.1832, 1997.

M. H. Cheng, M. Chiang, and . Hon, Growth Characteristics and Properties of TiN Coating by Chemical Vapor Deposition, Journal of The Electrochemical Society, vol.142, issue.5, pp.1573-1578, 1995.
DOI : 10.1149/1.2048615

E. O. Hall, « Yield point phenomena in metals and alloys, 1970.
DOI : 10.1007/978-1-4684-1860-6

B. S. Eroglu and . Gallois, Residual stresses in chemically vapour deposited coatings in the Ti-C-N system, J. de Physique IV C3, pp.155-162, 1993.

K. T. Takahashi, K. Sugiyama, and . Tomita, The Chemical Vapor Deposition of Titanium Carbide Coatings on Iron, Journal of The Electrochemical Society, vol.114, issue.12, pp.1230-1235, 1967.
DOI : 10.1149/1.2426456

. D. Lespiaux, « Processus de nucléation/croissance et caractérisation microstructurale de céramiques base SiC obtenues par CVD/CVI dans le système Si-C-H-Cl, Thèse :. ENSPCB, BORDEAUX I, No. d'ordre, p.766, 1992.

. J. Thornton, High Rate Thick Film Growth, Annual Review of Materials Science, vol.7, issue.1, pp.239-260, 1977.
DOI : 10.1146/annurev.ms.07.080177.001323

K. P. Klung and L. E. , Alexander: « X ray diffraction procedures, 1974.

W. S. Zhang and . Zhu, TiN coating of tool steels: a review, Journal of Materials Processing Technology, vol.39, issue.1-2, pp.165-177, 1993.
DOI : 10.1016/0924-0136(93)90016-Y

L. F. Fabreguette, M. Imhoff, B. Maglione, M. C. Domenichini, M. De-lucas et al., Correlation Between the Electrical Properties and the Morphology of Low-Pressure MOCVD Titanium Oxynitride Thin Films Grown at Various Temperatures, Chemical Vapor Deposition, vol.6, issue.3, pp.109-114, 2000.
DOI : 10.1002/(SICI)1521-3862(200006)6:3<109::AID-CVDE109>3.0.CO;2-4

T. S. Inoue, H. Ohba, K. Takata, and . Koterazawa, Effect of partial pressure on the internal stress and the crystallographic structure of r.f. reactive sputtered Ti-N films, Thin Solid Films, vol.343, issue.344, pp.343-344, 1999.
DOI : 10.1016/S0040-6090(98)01632-0

A. Bouteville, L. Imhoff, and J. C. Remy, Low temperature rapid thermal low pressure chemical vapor deposition of <111> oriented TiN layers from the TiCl 4 -NH 3 -H 2 gaseous phase, Microelectron. Eng, vol.37, pp.421-425, 1997.

Y. Makino, M. Nose, T. Tanaka, M. Misawa, A. Tanimoto et al., Characterization of Ti(NxOy) coatings produced by the arc ion plating method, Surface and Coatings Technology, vol.98, issue.1-3, pp.934-938, 1998.
DOI : 10.1016/S0257-8972(97)00309-5

A. K. Bartsch, E. Leonhardt, and . Wolf, Deposition of multilayer hard coatings using kinetically controlled chemical vapour deposition processes, Surf. Coat. Technol, pp.54-55, 1992.

. S. Nakahara, Microporosity in thin films, Thin Solid Films, vol.64, issue.1, pp.149-161, 1979.
DOI : 10.1016/0040-6090(79)90554-6

Y. Huang, G. Tsai, and . Yu, Effect of processing parameters on the microstructure and mechanical properties of TiN film on stainless steel by HCD ion plating, Références bibliographiques, pp.355-356, 1999.
DOI : 10.1016/S0040-6090(99)00670-7

B. S. Eroglu and . Gallois, Texture analyses of chemically vapor deposited coatings in the Ti-C-N system by wide film Debye-Scherrer X-ray diffraction technique, Le Journal de Physique IV, vol.03, issue.C3, pp.177-182, 1993.
DOI : 10.1051/jp4:1993322

URL : https://hal.archives-ouvertes.fr/jpa-00251379

-. J. Sundgren, Structure and properties of TiN coatings, Thin Solid Films, vol.128, issue.1-2, pp.21-44, 1985.
DOI : 10.1016/0040-6090(85)90333-5

J. U. Oh and . Je, Effects of strain energy on the preferred orientation of TiN thin films, Journal of Applied Physics, vol.74, issue.3, pp.1692-1696, 1993.
DOI : 10.1063/1.355297

P. L. Kuo and . Shen, On the condensation and preferred orientation of TiC nanocrystals ??? effects of electric field, substrate temperature and second phase, Materials Science and Engineering: A, vol.276, issue.1-2, pp.99-107, 2000.
DOI : 10.1016/S0921-5093(99)00504-3

D. S. Rickerby, A. M. Jones, and B. A. Bellamy, X-ray diffraction studies of physically vapour-deposited coatings, Surface and Coatings Technology, vol.37, issue.1, pp.111-137, 1989.
DOI : 10.1016/0257-8972(89)90124-2

J. J. Greene, L. Sundgren, I. Hultman, D. B. Petrov, and . Bergstrom, Development of preferred orientation in polycrystalline TiN layers grown by ultrahigh vacuum reactive magnetron sputtering, Applied Physics Letters, vol.67, issue.20, pp.2928-2930, 1995.
DOI : 10.1063/1.114845

A. Van and . Drift, Evolutionary selection, a principle governing growth orientation in vapourdeposited layers, Philips Res. Repts, vol.22, pp.267-288, 1967.

P. D. Rickerby and . Burnett, Correlation of process and system parameters with structure and properties of physically vapour- deposited hard coatings, Thin Solid Films, vol.157, issue.2, pp.195-222, 1988.
DOI : 10.1016/0040-6090(88)90004-1

L. J. Pelleg, S. Zevin, and . Lungo, Reactive-sputter-deposited TiN films on glass substrates, Thin Solid Films, vol.197, issue.1-2, pp.117-128, 1991.
DOI : 10.1016/0040-6090(91)90225-M

J. L. Hultman, J. E. Sundgren, D. B. Greene, I. Bergstrom, and . Petrov, ion irradiation during TiN deposition by reactive magnetron sputtering: Effects on microstructure and preferred orientation, Journal of Applied Physics, vol.78, issue.9, pp.5395-5403, 1995.
DOI : 10.1063/1.359720

. D. Hoffman, Stress and property control in sputtered metal films without substrate bias, Thin Solid Films, vol.107, issue.4, pp.353-358, 1983.
DOI : 10.1016/0040-6090(83)90296-1

P. A. Saerens, B. Van-houtte, C. Meert, and . Quaeyhaegens, Assessment of different X-ray stress measuring techniques for thin titanium nitride coatings, Journal of Applied Crystallography, vol.33, issue.2, pp.312-322, 2000.
DOI : 10.1107/S0021889800000145

J. I. Noyan, Cohen: « Residual stress -Measurement by diffraction and interpretation », 1987.

T. S. Inoue, H. Ohba, K. Takata, and . Koterazawa, Effect of partial pressure on the internal stress and the crystallographic structure of r.f. reactive sputtered Ti-N films, Thin Solid Films, vol.343, issue.344, pp.343-344, 1999.
DOI : 10.1016/S0040-6090(98)01632-0

. H. Windischmann, Intrinsic stress in sputtered thin films, Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films, vol.9, issue.4, pp.2431-2436, 1991.
DOI : 10.1116/1.577295

B. S. Eroglu and . Gallois, Residual stresses in chemically vapour deposited coatings in the Ti-C-N system, J. de Physique IV C3, pp.155-162, 1993.

J. Sundgren, B. Johansson, S. Karlsson, and H. T. Hentzell, Mechanisms of reactive sputtering of titanium nitride and titanium carbide II: Morphology and structure, Thin Solid Films, vol.105, issue.4, pp.367-384, 1983.
DOI : 10.1016/0040-6090(83)90319-X