T. Fe-nb and -. , 54 II.1.1.1

.. Microscopie-optique, 61 II.2.3. Microscopie électronique en transmission, p.64

.. Outils-de-caractérisation-de-la-microstructure-moyenne, 64 II.3.1. Diffusion aux petits angles 64 II.3.1.1. Diffusion des neutrons aux petits angles, 81 II.3.2. Analyses chimiques par dissolution de, p.82

.. Etude-paramétrique, Exemple : évolution des différents paramètres de la modélisation, ., p.180

.. Modélisation-de-la-précipitation-du-cuivre, 180 V.2.1. Introduction : Méthode suivie, 180 V.2.2.1

.. Etude-paramétrique, 181 V.2.3. Discussion, Ajustement sur les fractions volumiques, p.187

R. Aaron, H. B. Et-kotler, and G. R. , Second phase dissolution, Metallurgical Transactions, vol.18, issue.2, pp.393-408, 1971.
DOI : 10.1007/BF02663326

A. J. Ardell, On the coarsening of grain boundary precipitates, Acta Metallurgica, vol.20, issue.4, pp.601-609, 1972.
DOI : 10.1016/0001-6160(72)90015-6

M. F. Ashby and L. M. Et-brown, Diffraction contrast from spherically symmetrical coherency strains, Philosophical Magazine, vol.87, issue.91, pp.1083-1103, 1963.
DOI : 10.1080/14786436208213295

R. G. Baker and J. Et-nutting, The tempering of a Cr-Mo-V-W and a Mo-V steel, in "Precipitation processes in steels, Iron and steel institute special report, pp.1-22, 1959.

E. Bémont, Précipitation de carbures et de carbonitrures dans la ferrite, Ph.D, 2003.

J. J. Blackstock and G. J. Et-ackland, Phase transitions of copper precipitates in Fe???Cu alloys, Philosophical Magazine A, vol.233, issue.9, pp.2127-2148, 2001.
DOI : 10.1103/PhysRevB.47.5571

J. Bo?anski, D. A. Porter, H. Åström, and K. E. Et-easterling, The effect of stress annealing treatments on the structure of high heat-input welds containing Nb and Mo, Scandinavian Journal of Metallurgy, vol.6, pp.125-131, 1977.

O. Bouaziz, M. Kandel, G. Salvador, and D. Et-rebizzi, Note technique MPM n 99/2077 : Premiers éléments sur les caractéristiques mécaniques de la ferrite massive, 1999.

P. Buessler, P. Maugis, O. Bouaziz, and J. Et-schmitt, Integrated process-metallurgy modeling : example of precipitation during coil cooling, Proceedings of 44th MSWP, 2002.

P. Buessler, P. Maugis, O. Bouaziz, and J. Et-schmitt, Integrated Process-Metallurgy Modeling : Example of precipitation during coil cooling, Iron and Steelmaker, vol.30, issue.9, pp.33-39, 2003.

R. Bullough and R. C. Et-newman, The Flow of Impurities to an Edge Dislocation, Proc. R. Soc. A, 249, pp.427-440, 1962.
DOI : 10.1098/rspa.1959.0034

R. Bullough and R. C. Et-newman, The kinetics of migration of point defects to dislocations, Reports on Progress in Physics, vol.33, issue.1, pp.101-148, 1970.
DOI : 10.1088/0034-4885/33/1/303

J. W. Cahn, Nucleation on dislocations, Acta Metallurgica, vol.5, issue.3, pp.169-172, 1957.
DOI : 10.1016/0001-6160(57)90021-4

M. Charleux, W. Poole, M. Militzer, and A. Et-deschamps, Precipitation Behavior and its Effect on Strengthening of an HSLA-Nb, Metallurgical and Materials Transactions A, pp.1635-1647, 2001.

R. Chattopadhyay, A study on the kinetics of precipitation of niobium carbide in low-carbon steels, Transactions of the Indian Institute of Metals, pp.5-6, 1978.

J. Christian, The theory of transformations in alloys and metals, 1975.

A. J. Craven, K. He, L. A. Garvie, and T. N. Et-baker, Complex heterogeneous precipitation in titanium???niobium microalloyed Al-killed HSLA steels???I. (Ti,Nb)(C,N) particles, Acta Materialia, vol.48, issue.15, pp.15-3857, 2000.
DOI : 10.1016/S1359-6454(00)00194-4

A. J. Craven, K. He, L. A. Garvie, and T. N. Et-baker, Complex heterogeneous precipitation in titanium???niobium microalloyed Al-killed HSLA steels???II. Non-titanium based particles, Acta Materialia, vol.48, issue.15, pp.15-3869, 2000.
DOI : 10.1016/S1359-6454(00)00193-2

D. T. Cromer and D. A. Et-liberman, Relativistic Calculation of Anomalous Scattering Factors for X Rays, The Journal of Chemical Physics, vol.53, issue.5, p.1891, 1970.
DOI : 10.1063/1.1674266

A. T. Davenport, L. C. Brossard, R. E. Et, and M. , Precipitation in microalloyed high-strength low-alloy steels, JOM, vol.2, issue.2, pp.21-27, 1975.
DOI : 10.1007/BF03355951

A. Deschamps, Influence de la prédéformation et des traitements thermiques sur la microstructure et les propriétés des alliages Al-Zn-Mg-Cu, Ph.D, 1997.

A. Deschamps and Y. Bréchet, Influence of predeformation and agEing of an Al???Zn???Mg alloy???II. Modeling of precipitation kinetics and yield stress, Acta Materialia, vol.47, issue.1, pp.293-305, 1999.
DOI : 10.1016/S1359-6454(98)00296-1

A. Deschamps, M. Militzer, and W. J. Et-poole, Comparison of Precipitation Kinetics and Strengthening in an Fe-0.8%Cu Alloy and a 0.8% Cu-containing Low-carbon Steel, ISIJ International, vol.43, issue.11, pp.1826-1832, 2003.
DOI : 10.2355/isijinternational.43.1826

C. Desgranges and P. Et-maugis, Modèle de croissance et dissolution par différences finies : exemple d'application à l'étude de la précipitation, 1998.

B. Dutta, E. J. Palmiere, and C. M. Et-sellars, Modelling the kinetics of strain induced precipitation in Nb microalloyed steels, Acta Materialia, vol.49, issue.5, pp.785-794, 2001.
DOI : 10.1016/S1359-6454(00)00389-X

C. Fossaert, G. Rees, T. Maurickx, and H. K. Et-bhadeshia, The effect of niobium on the hardenability of microalloyed austenite, Metallurgical and Materials Transactions A, 26A, pp.21-30, 1995.
DOI : 10.1007/BF02669791

H. J. Frost and M. F. Ashby, Deformation-Mechanism maps, 1982.

K. Fujita and H. K. Et-bhadeshia, Modelling precipitation of niobium carbide in austenite: multicomponent diffusion, capillarity, and coarsening, Materials Science and Technology, vol.84, issue.4, pp.403-408, 2001.
DOI : 10.1016/0022-3697(61)90054-3

J. Geise and C. Et-herzig, Lattice and grain boundary diffusion of niobium in iron, Z. Metallkde, vol.76, pp.9-622, 1985.

D. Gendt, Cinétique de précipitation du carbure de niobium dans la ferrite, Ph.D, 2001.

T. Gladman, The Physical Metallurgy of Microalloyed Steels, The Institute of, Materials, 1997.

O. Glatter and O. Et-kratky, Small Angle X-Ray scattering, 1982.

S. R. Goodman, S. S. Brenner, and J. R. Et-low-jr, An FIM-atom probe study of the precipitation of copper from lron-1.4 at. pct copper. Part I: Field-ion microscopy, Metallurgical Transactions, vol.19, issue.10, pp.2363-2369, 1973.
DOI : 10.1007/BF02669376

S. R. Goodman, S. S. Brenner, and J. R. Et-low-jr, An FIM-atom probe study of the precipitation of copper from lron-1.4 at. pct copper. Part II: Atom probe analyses, Metallurgical Transactions, vol.245, issue.no. 54, pp.2371-2378, 1973.
DOI : 10.1007/BF02669377

B. Gueffroy and H. Et-löffler, On the influence of the pre-ageing temperature on the reversion behaviour of an Al-4.5at.%Zn -2.0at.% Mg alloy, Crystal Research and Technology, vol.16, issue.9, pp.1079-1085, 1981.

B. Gueffroy and H. Et-löffler, On the reversion behaviour of an Al???Zn(4.5 at%)???Mg(2.0 at%) alloy, Physica Status Solidi (a), vol.65, issue.2, pp.585-589, 1981.
DOI : 10.1002/pssa.2210660221

M. Guttmann, Grain boundary segregation and embrittlement in multicomponent systems: Recent literature revisited, The Donald McLean Symposium: Structural Materials engineering application through scientific insight, p.pp, 1995.

E. W. Hart, On the role of dislocations in bulk diffusion, Acta Metallurgica, vol.5, issue.10, p.597, 1957.
DOI : 10.1016/0001-6160(57)90127-X

C. Herzig, J. Geise, and S. V. Et-divinski, Niobium bulk and grain boundary diffusion in alpha-iron, Zeitschrift f??r Metallkunde, vol.93, issue.12, pp.1180-1187, 2002.
DOI : 10.3139/146.021180

H. Holleck, Material selection for hard coatings, Material Selection for Hard Coatings, pp.2661-2669, 1986.
DOI : 10.1116/1.573700

E. D. Hondros, Interfaces conference, 1969.

E. Hornbogen and R. C. Et-glenn, A metallographic study of precipitation of copper from alpha iron, Transactions of the Metallurgical Society of AIME, pp.1064-1070, 1960.

W. Huang, Thermodynamic evaluation of Nb???C system, Materials Science and Technology, vol.14, issue.2, pp.687-694, 1990.
DOI : 10.1016/0364-5916(85)90021-5

W. Huang, Thermodynamic Evaluation of the Fe-Nb-C System, Z. Metallkde, vol.81, pp.6-397, 1990.

R. C. Hudd, A. Jones, and M. N. Et-kale, A method for calculating the solubility and composition of carbonitride precipitates in steel with particular reference to niobium carbonitride, Journal of The Iron and steel Institute, pp.121-125, 1971.

K. J. Irvine, F. B. Pickering, and T. Et-gladman, Grain-refined C-Mn steels, Journal of The Iron and steel Institute, february, pp.161-182, 1967.

C. H. Iwashita and R. P. Wei, Coarsening of grain boundary carbides in a nickel-based ternary alloy during creep, Acta Materialia, vol.48, issue.12, pp.3145-3156, 2000.
DOI : 10.1016/S1359-6454(00)00107-5

R. Johnson, Iron, Physical Review, vol.134, issue.5A, pp.1329-1336, 1964.
DOI : 10.1103/PhysRev.134.A1329
URL : https://hal.archives-ouvertes.fr/jpa-00214334

R. Kampmann and R. Et-wagner, Atomic Transport and Defects in Metals by Neutron Scattering, 1986.

I. Kaur, W. Gust, and L. Et-kozma, Handbook of Grain and Interphase Boundary Diffusion Data, 1989.

R. Kesri and S. Et-hamar-thibault, Structures ordonnees a longue distance dans les carbures mc dans les fontes, Acta Metallurgica, vol.36, issue.1, pp.149-166, 1988.
DOI : 10.1016/0001-6160(88)90035-1

H. Kestenbach, Dispersion hardening by niobium carbonitride precipitation in ferrite, Materials Science and Technology, vol.87, issue.9, pp.731-739, 1997.
DOI : 10.1179/msc.1977.11.2.59

G. K. Kostorz, R. W. Buschow, M. C. Cahn, and . Flemings, Encyclopedia of Materials: Science and Technology, pp.5541-5548, 2001.

G. Krauss and S. W. Et-thompson, Ferritic Microstructures in Continuously Cooled Low- and Ultralow-carbon Steels., ISIJ International, vol.35, issue.8, pp.937-945, 1995.
DOI : 10.2355/isijinternational.35.937

. Landolt and . Bornsteïn, Diffusion in solid metals and alloys, 1990.

F. C. Larché and . Nabarro, Nucleation and precipitation on dislocations, in "Dislocations in solids, 1979.

N. Lavaire, J. Merlin, and V. Et-sardoy, Study of ageing in strained ultra and extra low carbon steels by thermoelectric power measurement, Scripta Materialia, vol.44, issue.4, pp.553-559, 2001.
DOI : 10.1016/S1359-6462(00)00634-5
URL : https://hal.archives-ouvertes.fr/hal-00475311

I. M. Lifshitz and V. V. Et-slyozov, The kinetics of precipitation from supersaturated solid solutions, Journal of Physics and Chemistry of Solids, vol.19, issue.1-2, pp.35-50, 1961.
DOI : 10.1016/0022-3697(61)90054-3

T. Maki, The ? ? ? transformation in ultralow carbon steels, pp.183-197, 1994.

F. Marchal and P. Et-maugis, Calculs de solubilité de NbC dans la ferrite et dans l'austénite - Comparaison Thermocalc / Wsol, Note IRSID n 98, 1574.

G. Martin, The theories of unmixing kinetics of solid solutions, Ecole d'été d'Aussois de métallurgie physique, p.pp, 1988.

J. W. Martin, R. D. Doherty, and B. Et-cantor, Stability of microstructure in metallic systems, 1997.
DOI : 10.1017/CBO9780511623134

N. Maruyama, G. D. Smith, and A. Et-cerezo, Interaction of the solute niobium or molybdenum with grain boundaries in ??-iron, Materials Science and Engineering: A, vol.353, issue.1-2, pp.126-132, 2003.
DOI : 10.1016/S0921-5093(02)00678-0

M. Mathon, Etude de la precipitation et des mécanismes microscopiques de durcissement sous irradiation dans des alliages ferritiques dilués, 1995.

H. Matter, J. Winter, and W. Et-triftshauser, Phase transformations and vacancy formation energies of transition metals by positron annihilation, Applied Physics, vol.29, issue.2, pp.135-140, 1979.
DOI : 10.1007/BF00885934

P. Maugis and M. Et-gouné, A Computer Model of Carbonitride Precipitation in Steel, Proceedings of the International Alloy Conference, 2002.
DOI : 10.1007/0-387-25953-8_5
URL : https://hal.archives-ouvertes.fr/hal-00474889

J. T. Michalak and H. W. Et-paxton, Some recovery characteristics of zone-melded iron, Transactions of the Metallurgical society of AIME, pp.850-857, 1961.

R. D. Misra, G. C. Weatherly, and D. Et-embury, Kinetics of cold work embrittlement in rephosphorised, interstitial free steels, Materials Science and Technology, vol.28, issue.7, pp.9-12, 2000.
DOI : 10.1179/030634580790438163

E. V. Morales, J. Gallego, and H. Et-kestenbach, On coherent carbonitride precipitation in commercial microalloyed steels, Philosophical Magazine Letters, vol.201, issue.2, pp.79-87, 2003.
DOI : 10.1016/S0921-5093(00)01423-4

J. Morniroli, Ecole thématique : Microscopie des défauts cristallins, 2001.

M. Nicolas, Evolution de l'état de précipitation dans un alliage Al-Zn-Mg lors de traitements thermiques anisothermes et dans la zone affectée thermiquement de joints soudés, Ph.D, 2002.

M. Nicolas and A. Et-deschamps, Characterisation and modelling of precipitate evolution in an AlZnMg alloy during non-isothermal heat treatments, Acta Materialia, vol.51, issue.18, pp.5335-5348, 2003.

Y. Ohmori, ]: precipitation of fine niobium carbide particles in low carbon steels, Transaction of the, pp.194-203, 1975.

H. Okamoto, Fe-Nb (iron-niobium), Journal of Phase Equilibria, vol.14, issue.3, pp.650-652, 1993.
DOI : 10.1007/BF02669162

P. J. Othen, M. L. Jenkins, G. D. Smith, and W. J. Et-phythian, Transmission electron microscope investigations of the structure of copper precipitates in thermally-aged Fe???Cu and Fe???Cu???Ni, Philosophical Magazine Letters, vol.233, issue.6, pp.383-391, 1991.
DOI : 10.1080/09500839008202362

L. M. Perera, Precipitation behaviour and microstructural evolution in Ti-Nb IF steel, Ph.D, 1992.

L. M. Perera, I. A. Rauf, J. D. Boyd, and S. Et-saimota, Precipitation and microstructural evolution in warm rolled Ti-Nb IF steel, Advances in hot deformation textures and microstructures, The Minerals, 1994.

V. Perovic, G. R. Purdy, and L. M. Et-brown, On the stability of arrays of precipitates, Acta Metallurgica, vol.27, issue.6, pp.1075-1084, 1979.
DOI : 10.1016/0001-6160(79)90195-0

V. Perovic, G. R. Purdy, and L. M. Et-brown, Autocatalytic nucleation and elastic stabilization of linear arrays of plate-shaped precipitates, Acta Metallurgica, vol.29, issue.5, pp.889-902, 1981.
DOI : 10.1016/0001-6160(81)90131-0

W. J. Phythian, A. J. Foreman, C. A. English, J. T. Buswell, M. G. Hetherington et al., The Structure and Hardening Mechanism of Copper Precipitation in Thermally Aged or Irradiated Fe-Cu and Fe-Cu-Ni Model Alloys, Proc. 15th Int. Symp. on Effects of Radiation in Materials, pp.131-150, 1990.
DOI : 10.1520/STP17866S

S. Pizzini, K. J. Roberts, and W. J. Et-phythian, A fluorescence EXAFS study of the structure of copper-rich precipitates in Fe???Cu and Fe???Cu???Ni alloys, Philosophical Magazine Letters, vol.2, issue.4, pp.4-223, 1990.
DOI : 10.1016/0022-3115(87)90525-3

J. M. Rigsbee and H. I. Et-aaronson, The interfacial structure of the broad faces of ferrite plates, Acta Metallurgica, vol.27, issue.3, pp.365-376, 1979.
DOI : 10.1016/0001-6160(79)90029-4

T. P. Russell, J. S. Lin, S. Spooner, and J. D. Et-wignall, Intercalibration of small-angle X-ray and neutron scattering data, Journal of Applied Crystallography, vol.21, issue.6, pp.629-638, 1988.
DOI : 10.1107/S0021889888004820

G. Salje and M. Et-feller-kniepmeier, The diffusion and solubility of copper in iron, Journal of Applied Physics, vol.48, issue.5, pp.1833-1839, 1977.
DOI : 10.1063/1.323934

K. Sato and Y. Et-ishiguro, Microchemistry of complex carbides, International Forum for Physical Metallurgy of IF Steels, p.pp, 1994.

C. P. Scott, D. Chaleix, P. Barges, and V. Et-rebischung, Quantitative analysis of complex carbo-nitride precipitates in steels, Scripta Materialia, vol.47, issue.12, pp.845-849, 2002.
DOI : 10.1016/S1359-6462(02)00219-1

A. Seeger, Lattice Vacancies in High-Purity ??-Iron, physica status solidi (a), vol.4, issue.18, p.289, 1998.
DOI : 10.1002/(SICI)1521-396X(199806)167:2<289::AID-PSSA289>3.0.CO;2-V

Y. Shima, Y. Ishikawa, H. Nitta, Y. Yamazaki, K. Mimura et al., Self-Diffusion along Dislocations in Ultra High Purity Iron, MATERIALS TRANSACTIONS, vol.43, issue.2, pp.173-177, 2002.
DOI : 10.2320/matertrans.43.173

J. F. Smith, O. N. Carlson, and R. R. Et-de-avillez, The niobium-carbon system, Journal of Nuclear Materials, vol.148, issue.1, pp.1-16, 1987.
DOI : 10.1016/0022-3115(87)90512-5

G. R. Speich and R. A. Et-oriani, The rate of coarsening of copper precipitates in an alpha-iron matrix, Transactions of the Metallurgical Society of AIME, pp.623-631, 1965.

M. V. Speight, Growth kinetics of grain-boundary precipitates, Acta Metallurgica, vol.16, issue.1, p.133, 1968.
DOI : 10.1016/0001-6160(68)90081-3

M. Suehiro, Z. Liu, and J. Et-Ågren, Effect of niobium on massive transformation in ultra low carbon steels: a solute drag treatment, Acta Materialia, vol.44, issue.10, pp.4241-4251, 1996.
DOI : 10.1016/S1359-6454(96)00036-5

K. A. Taylor, Solubility products for titanium-, vanadium-, and niobium-carbide in ferrite, Scripta Metallurgica et Materialia, vol.32, issue.1, pp.7-12, 1995.
DOI : 10.1016/S0956-716X(99)80002-8

M. Verdier, Restauration dans des alliages aluminium-magnésium, Ph.D, 1996.

R. Wagner and R. Et-kampmann, Homogeneous second phase precipitationMaterials Science and Technology, a comprehensive treatment, VCH, p.213, 1991.

D. B. Williams and C. B. Carter, Transmission electron microscopy : a textbook for materials science, 1996.
DOI : 10.1007/978-1-4757-2519-3

E. A. Wilson, The .GAMMA..RAR..ALPHA. Transformation in Low Carbon Irons., ISIJ International, vol.34, issue.8, pp.615-630, 1994.
DOI : 10.2355/isijinternational.34.615
URL : https://hal.archives-ouvertes.fr/ijn_00000036

Z. Yang and M. Et-enomoto, Discrete lattice plane analysis of Baker???Nutting related B1 compound/ferrite interfacial energy, Materials Science and Engineering: A, vol.332, issue.1-2, pp.184-192, 2002.
DOI : 10.1016/S0921-5093(01)01729-4

C. Zener, Theory of Growth of Spherical Precipitates from Solid Solution, Journal of Applied Physics, vol.20, issue.10, p.950, 1949.
DOI : 10.1063/1.1698258

H. S. Zurob, C. R. Hutchinson, Y. Bréchet, and G. R. Et-purdy, Modelling recrystallization of microalloyed austenite : effect of coupling recovery, precipitation and recrystallization, Acta Materialia, vol.50, pp.3075-3092, 2002.