. De-la-matrice, Chaque ligne contient les valeurs de l'intensité observée sur une tranche (perpendiculairement à z) Afin d'appliquer l'inversion d'Abel à cette série de valeurs, il est nécessaire de déterminer le centre du plasma. Pour ce faire, nous remettons le fond de l'intensité de chaque ligne à 0 (recherche du minimum et retranchement à toutes les intensités) et nous cherchons le barycentre des intensités sur la ligne, La ligne est alors symétrisée autour du barycentre précédemment déterminé. Le résultat correspond alors à la quantité I z (y) sur laquelle nous appliquons l'inversion d'Abel

D. Dykkamp and T. Vankatesan, bulk material, Applied Physics Letters, vol.51, issue.8, p.619, 1987.
DOI : 10.1063/1.98366

D. Damiani, Thèse de doctorat de l, 1991.

H. M. Smith and A. F. Turner, Vacuum Deposited Thin Films Using a Ruby Laser, Applied Optics, vol.4, issue.1, p.147, 1965.
DOI : 10.1364/AO.4.000147

D. B. Chrisey and G. K. Hubler, Pulsed laser deposition of thin films, Willey intersc, 1992.

C. L. Marquardt, R. T. Williams, and . Mat, Deposition of Amorphous Carbon Films from Laser-Produced Plasmas, MRS Proceedings, vol.10, p.325, 1985.
DOI : 10.1063/1.1708034

S. S. Wagal, E. M. Jungerman, and C. B. Collins, Diamond???like carbon films prepared with a laser ion source, Applied Physics Letters, vol.53, issue.3, p.187, 1988.
DOI : 10.1063/1.100169

C. B. Collins, F. Davanloo, E. M. Juengerman, W. R. Osborn, and D. R. Jander, Laser plasma source of amorphic diamond, Applied Physics Letters, vol.54, issue.3, p.216, 1989.
DOI : 10.1063/1.101013

T. Sato, S. Furuno, S. Iguchi, and M. Hanabusa, Diamond-like carbon films prepared by pulsed-laser evaporation, Applied Physics A Solids and Surfaces, vol.55, issue.4, p.355, 1988.
DOI : 10.1007/BF00617942

J. Krishnaswamy and A. Rengan, Thin???film deposition by a new laser ablation and plasma hybrid technique, Applied Physics Letters, vol.54, issue.24, p.2455, 1989.
DOI : 10.1063/1.101070

A. V. Gusarov and A. G. Gnedovets, Gas dynamics of laser ablation: Influence of ambient atmosphere, Journal of Applied Physics, vol.88, issue.7, p.4352, 2000.
DOI : 10.1063/1.1286175

M. Aden and E. W. Kreutz, Weight loss of alumina and zirconia targets during PLD, Journal of Physics D: Applied Physics, vol.28, issue.12, p.2595, 1995.
DOI : 10.1088/0022-3727/28/12/030

A. A. Anderson and R. W. Eason, Ti:sapphire planar waveguide laser grown by pulsed laser deposition, Optics Letters, vol.22, issue.20, p.1556, 1997.
DOI : 10.1364/OL.22.001556

R. Serna and C. N. Afonso, thin films by pulsed laser deposition, Applied Physics Letters, vol.69, issue.11, p.1541, 1996.
DOI : 10.1063/1.117998

URL : https://hal.archives-ouvertes.fr/hal-01287896

M. N. Séméria, J. Baylet, B. Montmayeul, C. Germain, B. Angleraud et al., Carbon FED requirements ??? application to a PLD carbon cathode, Diamond and Related Materials, vol.8, issue.2-5, p.801, 1999.
DOI : 10.1016/S0925-9635(98)00422-1

S. M. Green and A. Piqué, Pulsed Laser Deposition of thin films, 1994.

J. F. Elloy, Les lasers de puissance, 1985.

R. Kelly, A. Miotello, D. Chrisey, G. K. Hubler, and . Wiley-interscience, Pulsed Laser Deposition of thin films, Phys. Rev. Lett, vol.34, issue.70, p.1830, 1993.

W. Fucke and U. Seydel, High temp. ? High press, pp.12-419, 1980.

R. Kelly and A. Miotello, Does normal boiling exist due to laser-pulse or ion bombardment?, Journal of Applied Physics, vol.87, issue.6, p.3177, 2000.
DOI : 10.1063/1.372319

A. M. Malvezzi and N. Bloembergen, Time-resolved picosecond optical measurements of laser-excited graphite, Physical Review Letters, vol.57, issue.1, p.146, 1986.
DOI : 10.1103/PhysRevLett.57.146

I. S. Grigoryev, Handbook of Physical Quantities, 1995.

M. Skrzypczack, P. Bertrand, J. Zdanowski, and L. Pawlowski, Modeling of temperature fields in the graphite target at pulsed laser deposition of CNx films, Surface and Coatings Technology, vol.138, issue.1, p.39, 2001.
DOI : 10.1016/S0257-8972(00)01124-5

S. Sastry, Liquid Limits: Glass Transition and Liquid-Gas Spinodal Boundaries of Metastable Liquids, Physical Review Letters, vol.85, issue.3, p.590, 2000.
DOI : 10.1103/PhysRevLett.85.590

A. Peterlongo, A. Miotello, and R. Kelly, Laser-pulse sputtering of aluminum: Vaporization, boiling, superheating, and gas-dynamic effects, Physical Review E, vol.50, issue.6, p.4716, 1994.
DOI : 10.1103/PhysRevE.50.4716

V. Craciun and N. Bassim, Laser-induced explosive boiling during nanosecond laser ablation of silicon, Applied Surface Science, vol.186, issue.1-4, p.288, 2002.
DOI : 10.1016/S0169-4332(01)00766-8

T. Smausz, N. Kresz, and B. Hopp, Target morphology dependence of the particulate generation during excimer laser ablation of polytetrafluoroethylene, Applied Surface Science, vol.177, issue.1-2, p.66, 2001.
DOI : 10.1016/S0169-4332(01)00204-5

J. Hermann, Thèse de doctorat de l'Université d, 1991.

H. Dupendant and J. P. Gavigan, Velocity distribution of micron-size particles in thin film laser ablation deposition (LAD) of metals and oxide superconductors, Applied Surface Science, vol.43, issue.1-4, p.369, 1989.
DOI : 10.1016/0169-4332(89)90241-9

T. Venkatesan, X. D. Wu, and . Mater, Pulsed Laser Deposition: Future Directions, MRS Bulletin, vol.79, issue.02, p.54, 1992.
DOI : 10.1557/S0883769400040628

K. Kinoshita and H. Ishibashi, Improved Surface Smoothness of $\bf YBa_{2}Cu_{3}O_{\ninmbi y}$ Films and Related Multilayers by ArF Excimer Laser Deposition with Shadow Mask ???Eclipse Method???, Japanese Journal of Applied Physics, vol.33, issue.Part 2, No. 3B, p.417, 1994.
DOI : 10.1143/JJAP.33.L417

A. A. Voevodin and M. A. Capano, Design of a Ti/TiC/DLC functionally gradient coating based on studies of structural transitions in Ti???C thin films, Thin Solid Films, vol.298, issue.1-2, p.107, 1997.
DOI : 10.1016/S0040-6090(96)09145-6

A. A. Voevodin, J. S. Zabinski, and . Diam, Superhard, functionally gradient, nanolayered and nanocomposite diamond-like carbon coatings for wear protection, Diamond and Related Materials, vol.7, issue.2-5, p.463, 1998.
DOI : 10.1016/S0925-9635(97)00214-8

A. A. Voevodin and M. S. Donley, Preparation of amorphous diamond-like carbon by pulsed laser deposition: a critical review, Surface and Coatings Technology, vol.82, issue.3, p.199, 1996.
DOI : 10.1016/0257-8972(95)02734-3

C. Germain, C. Girault, R. Gisbert, and A. Catherinot, KrF laser photo-ablation of a graphite target: application to the development of thin films, Diamond and Related Materials, vol.3, issue.4-6, p.598, 1994.
DOI : 10.1016/0925-9635(94)90232-1

Q. Lu, Thermodynamic evolution of phase explosion during high-power nanosecond laser ablation, Physical Review E, vol.67, issue.1, p.16410, 2003.
DOI : 10.1103/PhysRevE.67.016410

R. Kelly, On the dual role of the Knudsen layer and unsteady, adiabatic expansion in pulse sputtering phenomena, The Journal of Chemical Physics, vol.92, issue.8, p.5047, 1990.
DOI : 10.1063/1.458540

S. Prawer and C. J. Roussow, Structural investigation of helium ion???beam???irradiated glassy carbon, Journal of Applied Physics, vol.63, issue.9, p.4435, 1988.
DOI : 10.1063/1.340162

A. C. Ferrari and J. Robertson, Interpretation of Raman spectra of disordered and amorphous carbon, Physical Review B, vol.61, issue.20, p.14095, 2000.
DOI : 10.1103/PhysRevB.61.14095

R. K. Thareja, from laser produced carbon plasma, The Journal of Chemical Physics, vol.100, issue.5, p.4019, 1994.
DOI : 10.1063/1.466337

T. Ikegami, S. Ishibashi, and J. , Spatial distribution of carbon species in laser ablation of graphite target, Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films, vol.19, issue.4, p.1304, 2001.
DOI : 10.1116/1.1381403

K. J. Koivusaari, J. Levoska, and S. Leppävuori, Pulsed-laser deposition of diamond-like carbon: Relations between laser fluence, velocity of carbon ions, and bonding in the films, Journal of Applied Physics, vol.85, issue.5, p.2915, 1999.
DOI : 10.1063/1.369057

R. O. Dillon, J. A. Woollam, and V. Katkanant, Use of Raman scattering to investigate disorder and crystallite formation in as-deposited and annealed carbon films, Physical Review B, vol.29, issue.6, p.3482, 1984.
DOI : 10.1103/PhysRevB.29.3482

R. J. Nemanich and S. A. Solin, First- and second-order Raman scattering from finite-size crystals of graphite, Physical Review B, vol.20, issue.2, p.392, 1979.
DOI : 10.1103/PhysRevB.20.392

R. O. Dillon and J. A. Woollam, Use of Raman scattering to investigate disorder and crystallite formation in as-deposited and annealed carbon films, Physical Review B, vol.29, issue.6, p.3482, 1984.
DOI : 10.1103/PhysRevB.29.3482

J. Wagner and M. Ramsteiner, Resonant Raman scattering of amorphous carbon and polycrystalline diamond films, Physical Review B, vol.40, issue.3, p.1817, 1989.
DOI : 10.1103/PhysRevB.40.1817

M. A. Tamor and W. C. Vassel, Raman ??????fingerprinting?????? of amorphous carbon films, Journal of Applied Physics, vol.76, issue.6, p.3823, 1994.
DOI : 10.1063/1.357385

G. Messina and A. Paoletti, Raman characterisation and hardness properties of diamond-like carbon films grown by pulsed laser deposition technique, Microsystem Technologies, vol.6, issue.1, p.30, 1999.
DOI : 10.1007/s005420050171

S. M. Huang and Z. Sun, Ultraviolet and visible Raman spectroscopy characterization of diamond-like carbon film growth by pulsed laser deposition, Applied Physics A: Materials Science & Processing, vol.74, issue.4, p.519, 2002.
DOI : 10.1007/s003390101044

A. Cuesta, P. Damelincourt, and J. Laureyns, Raman microprobe studies on carbon materials, Carbon, vol.32, issue.8, p.1523, 1994.
DOI : 10.1016/0008-6223(94)90148-1

F. Tuinstra and J. L. Koenig, Raman Spectrum of Graphite, The Journal of Chemical Physics, vol.53, issue.3, p.1126, 1970.
DOI : 10.1063/1.1674108

P. V. Huong and . Diam, Structural studies of diamond films and ultrahard materials by Raman and micro-Raman spectroscopies, Diamond and Related Materials, vol.1, issue.1, p.33, 1991.
DOI : 10.1016/0925-9635(91)90009-Y

S. Prawer, K. W. Nugent, Y. Lifshitz, and G. D. Lempert, Systematic variation of the Raman spectra of DLC films as a function of sp2:sp3 composition, Diamond and Related Materials, vol.5, issue.3-5, p.433, 1996.
DOI : 10.1016/0925-9635(95)00363-0

M. Chhowalla and A. C. Ferrari, Evolution of sp2 bonding with deposition temperature in tetrahedral amorphous carbon studied by Raman spectroscopy, Applied Physics Letters, vol.76, issue.11, p.1419, 2000.
DOI : 10.1063/1.126050

S. Prawer, K. W. Nugent, Y. Lifschitz, G. D. Lempert, E. Grossmann et al., Systematic variation of the Raman spectra of DLC films as a function of sp2:sp3 composition, Diamond and Related Materials, vol.5, issue.3-5, p.433, 1996.
DOI : 10.1016/0925-9635(95)00363-0

J. Schäfer and J. Ristein, Photoemission study of amorphous carbon modifications and comparison with calculated densities of states, Physical Review B, vol.53, issue.12, p.7762, 1996.
DOI : 10.1103/PhysRevB.53.7762

J. C. Lascovich and R. Giogi, Evaluation of the sp2/sp3 ratio in amorphous carbon structure by XPS and XAES, Applied Surface Science, vol.47, issue.1, p.17, 1991.
DOI : 10.1016/0169-4332(91)90098-5

J. Diaz and G. Paolicelli, photoemission spectra of amorphous carbon films, Physical Review B, vol.54, issue.11, p.8064, 1996.
DOI : 10.1103/PhysRevB.54.8064

J. Dong and D. A. Drabold, Ring formation and the structural and electronic properties of tetrahedral amorphous carbon surfaces, Physical Review B, vol.57, issue.24, p.15591, 1998.
DOI : 10.1103/PhysRevB.57.15591

M. P. Siegel and D. R. Tallan, Ultrahard carbon nanocomposite films, Applied Physics Letters, vol.76, issue.21, p.3052, 2000.
DOI : 10.1063/1.126576

S. Xu and L. K. Cheah, Spectroscopic ellipsometry studies of tetrahedral amorphous carbon prepared by filtered cathodic vacuum arc technique, Thin Solid Films, vol.312, issue.1-2, p.160, 1998.
DOI : 10.1016/S0040-6090(97)00742-6

M. Gerl, J. P. Issi, J. J. Cuomo, and D. L. Pappas, Traité des matériaux, Phys. des mat. n° 8 , Pres, Of Appl. Phys, vol.70, p.1706, 1991.

D. R. Mckenzie, D. Muller, and B. A. Pailthorpe, Compressive-stress-induced formation of thin-film tetrahedral amorphous carbon, Physical Review Letters, vol.67, issue.6, p.773, 1991.
DOI : 10.1103/PhysRevLett.67.773

C. A. Davis, A simple model for the formation of compressive stress in thin films by ion bombardment, Thin Solid Films, vol.226, issue.1, p.30, 1993.
DOI : 10.1016/0040-6090(93)90201-Y

P. J. Fallon and V. S. Veerasamy, Properties of filtered-ion-beam-deposited diamondlike carbon as a function of ion energy, Physical Review B, vol.48, issue.7, p.4777, 1993.
DOI : 10.1103/PhysRevB.48.4777

M. C. Polo and J. L. Andujar, Preparation of tetrahedral amorphous carbon films by filtered cathodic vacuum arc deposition, Diamond and Related Materials, vol.9, issue.3-6, p.663, 2000.
DOI : 10.1016/S0925-9635(99)00339-8

H. C. Ong, H. Chang, and R. P. , Effect of laser intensity on the properties of carbon plasmas and deposited films, Physical Review B, vol.55, issue.19, p.13213, 1997.
DOI : 10.1103/PhysRevB.55.13213

A. C. Ferrari and S. Rodil, Is stress necessary to stabilise sp3 bonding in diamond-like carbon?, Diamond and Related Materials, vol.11, issue.3-6, p.994, 2002.
DOI : 10.1016/S0925-9635(01)00705-1

T. A. Friedmann and K. F. Mccarty, Thermal stability of amorphous carbon films grown by pulsed laser deposition, Applied Physics Letters, vol.68, issue.12, p.1643, 1996.
DOI : 10.1063/1.115891

J. P. Sullivan and T. A. Friedmann, Diamond and Amorphous Carbon MEMS, MRS Bulletin, vol.14, issue.04, p.309, 2001.
DOI : 10.1016/S0925-9635(98)00164-2

T. M. Alam, T. A. Friedmann, P. A. Schultz, and D. Sebastiani, NMR spectroscopy, Physical Review B, vol.67, issue.24, p.245309, 2003.
DOI : 10.1103/PhysRevB.67.245309

C. Weissmantel and G. Reisse, Characterization of hard carbon films by electron energy loss spectrometry, Thin Solid Films, vol.61, issue.2, p.1, 1979.
DOI : 10.1016/0040-6090(79)90451-6

M. W. Moon and J. W. Chung, An experimental study of the influence of imperfections on the buckling of compressed thin films, Acta Materialia, vol.50, issue.5, p.1219, 2002.
DOI : 10.1016/S1359-6454(01)00423-2

B. Audoly, Thèse de doctorat de l, 2000.

F. Seitz and J. S. Koehler, Solid State Phys, p.305, 1956.

N. A. Marks, Thèse de doctorat de l, 1996.

N. A. Marks and D. R. Mckenzie, Molecular-dynamics study of compressive stress generation, Physical Review B, vol.53, issue.7, p.4117, 1996.
DOI : 10.1103/PhysRevB.53.4117

G. Gille and B. Rau, Buckling instability and adhesion of carbon layers, Thin Solid Films, vol.120, issue.2, p.109, 1984.
DOI : 10.1016/0040-6090(84)90365-1

D. Nir, Stress relief forms of diamond-like carbon thin films under internal compressive stress, Thin Solid Films, vol.112, issue.1, p.41, 1984.
DOI : 10.1016/0040-6090(84)90500-5

K. Lee, Y. Baik, and . Diam, Stress relief behaviour of diamond-like carbon films on glasses, Diamond and Related Materials, vol.2, issue.2-4, p.218, 1993.
DOI : 10.1016/0925-9635(93)90056-8

S. Xu and L. K. Chaeh, Spectroscopic ellipsometry studies of tetrahedral amorphous carbon prepared by filtered cathodic vacuum arc technique, Thin Solid Films, vol.312, issue.1-2, p.160, 1998.
DOI : 10.1016/S0040-6090(97)00742-6

G. E. Jellison and F. Modine, Parameterization of the optical functions of amorphous materials in the interband region, Applied Physics Letters, vol.69, issue.3, p.371, 1996.
DOI : 10.1063/1.118064

G. E. Jellison and F. Modine, , 371 (1996)], Applied Physics Letters, vol.69, issue.14, p.2137, 1996.
DOI : 10.1063/1.118155

C. E. Johnson and W. A. Weimer, Characterization of diamond films by thermogravimetric analysis and infrared spectroscopy, Materials Research Bulletin, vol.24, issue.9, p.1127, 1989.
DOI : 10.1016/0025-5408(89)90070-6

L. Landau and E. Lifchitz, Physique Théorique Tome III, Mécanique quantique ed, 1967.

M. Ohring, The Materials Science of Thin Films, 1992.

C. Ronning, U. Griesmeier, M. Gross, H. C. Hofsäss, R. G. Downing et al., Conduction processes in boron- and nitrogen-doped diamond-like carbon films prepared by mass-separated ion beam deposition, Diamond and Related Materials, vol.4, issue.5-6, p.666, 1995.
DOI : 10.1016/0925-9635(94)05219-0

J. C. Simmons, Poole-Frenkel Effect and Schottky Effect in Metal-Insulator-Metal Systems, Physical Review, vol.155, issue.3, p.657, 1967.
DOI : 10.1103/PhysRev.155.657

J. Robertson and E. P. O-'reilly, Electronic and atomic structure of amorphous carbon, Physical Review B, vol.35, issue.6, p.2946, 1987.
DOI : 10.1103/PhysRevB.35.2946

S. R. Silva and C. J. , Enhancing the electrical conduction in amorphous carbon and prospects for device applications, Diamond and Related Materials, vol.12, issue.2, p.151, 2003.
DOI : 10.1016/S0925-9635(03)00016-5

A. Pillonnet, Thèse de doctorat de l, 2002.

A. A. Voevodin and J. G. Jones, Growth and structure of fullerene-like CNx thin films produced by pulsed laser ablation of graphite in nitrogen, Journal of Applied Physics, vol.92, issue.9, p.4980, 2002.
DOI : 10.1063/1.1509106

Q. Wei, R. J. Narayan, J. Narayan, J. Sankar, and A. K. Sharma, Improvement of wear resistance of pulsed laser deposited diamond-like carbon films through incorporation of metals, Materials Science and Engineering: B, vol.53, issue.3, p.262, 1998.
DOI : 10.1016/S0921-5107(98)00150-0

X. Lafontan, Thèse de doctorat de l, 2001.

P. Blondy, Workshop on advances on RF-MEMS technology, IEEE Int. Microwave Symp. Dig, 2002.

V. Oss and C. J. , Forces interfaciales en milieux aqueux