B. M. Novak, M. W. Ellsworth, and C. Verrier, Nanostructured organic-inorganic hybrid materials synthetized through simultaneous process, in Hybrid organic-Inorganic Composites, pp.86-96, 1995.

A. Guyot, Synthèse de petites particules polymères sphériques de taille contrôlée, pp.1-9, 1987.

M. Chainey, J. Hearn, and M. C. Wilkinson, Kinetics of the surfactant-free emulsion polymerization of styrene : application of quantitative theories to the post nucleation stage, Journal of Polymer Science, pp.25-505, 1987.

P. Espiard, Encapsulation de silices colloïdales par polymérisation en émulsion : latex filmogènes, Thèse de l, 1992.

Q. Wang, S. Fu, and T. Yu, Emulsion polymerization, Progress in Polymer Science, pp.703-753, 1994.
URL : https://hal.archives-ouvertes.fr/hal-00436874

R. K. Iler, The Chemistry of Silica, 1979.

L. T. Zhuravlev, The surface chemistry of amorphous silica Zhuravlev model, Colloids and surfaces A: Physicochemical and Engineering Aspects, pp.1-38, 2000.

P. Hajji, L. David, J. Gérard, J. Pascault, and G. , Vigier, Synthesis, structure and morphology of polymer-silica hybrid nanocomposites based on hydroxyethyl methacrylate, Journal of Polymer Science, Part B : Polymer Physics, pp.37-3172, 1999.

N. Garin, Caractérisation par résonance magnétique nucléaire de l'interaction matrice élastomère-particules de silice en présence d'agents de couplage, 1999.

S. Ek, A. Root, M. Peussa, and L. Niinistö, Determination of the hydroxyl group content in silica by thermogravimetry and a comparison with 1H MAS NMR results, Thermochimica Acta, vol.379, issue.1-2, pp.379-201, 2001.
DOI : 10.1016/S0040-6031(01)00618-9

M. Peussa, S. Härkönen, J. Puputti, and L. Niinistö, Application of PLS multivariate calibration for the determination of the hydroxyl group content in calcined silica by DRIFTS, Journal of Chemometrics, vol.188, issue.5-6, pp.14-501, 2000.
DOI : 10.1002/1099-128X(200009/12)14:5/6<501::AID-CEM613>3.0.CO;2-M

R. F. De-farias and C. Airoldi, Thermogravimetry as a reliable tool to estimate the density of silanols on a silica gel surface, Journal of Thermal Analysis, pp.53-751, 1998.

A. P. Legrand, H. Hommel, and J. B. , Espinose de la Caillerie, On the silica edge, an NMR point of view, Colloids and Surfaces A: Physicochemical and Engineering Aspects, pp.158-157, 1999.

J. B. Espinose-de-la-caillerie, M. R. Aimeur, Y. Kortobi, and A. P. Legrand, Water adsorption on pyrogenic silica followed by 1 H MAS NMR, Journal of Colloid and Interface Science, pp.194-434, 1997.

J. L. Keddie, Film formation of latex, Materials Science and Engineering: R: Reports, vol.21, issue.3, pp.101-170, 1997.
DOI : 10.1016/S0927-796X(97)00011-9

P. R. Sperry, B. S. Snyder, M. L. O-'dowd, and P. M. Lesko, Role of Water in Particle Deformation and Compaction in Latex Film Formation, Langmuir, vol.10, issue.8, pp.10-2619, 1994.
DOI : 10.1021/la00020a021

E. M. Boczar, B. C. Dionne, Z. Fu, A. B. Kirk, P. M. Lesko et al., Spectroscopic studies of polymer interdiffusion during film formation, Macromolecules, vol.26, issue.21, pp.26-5772, 1993.
DOI : 10.1021/ma00073a035

J. Feng, H. Pham, V. Stoeva, and M. A. Winnik, Polymer diffusion in latex films at ambiant temperature, Journal of Polymer Science, part B : Polymer Physics, pp.36-1129, 1998.

J. Feng, M. A. Winnik, and A. Siemiarczuk, Interface characterization in latex blend films by fluorescence energy transfer, Journal of Polymer Science Part B: Polymer Physics, vol.36, issue.7, pp.36-1115, 1998.
DOI : 10.1002/(SICI)1099-0488(199805)36:7<1115::AID-POLB3>3.0.CO;2-T

D. Juhué and J. Lang, Film Formation from Dispersion of Core-Shell Latex Particles, Macromolecules, vol.28, issue.4, pp.1306-1308, 1995.
DOI : 10.1021/ma00108a070

D. Juhué and J. Lang, Latex film formation in the presence of organic solvents, Macromolecules, vol.27, issue.3, pp.695-701, 1994.
DOI : 10.1021/ma00081a012

D. Juhué, W. Wang, and M. A. Winnik, Influence of a coalescing aid on polymer diffusion in poly(butyl methacrylate) latex films, Makromolekulare Chemie, Rapid Communications, pp.14-345, 1993.

S. Kawagushi, E. Odrobina, and M. A. Winnik, Non-ionic surfactant effect on polymer diffusion in poly(butyl methacrylate) latex films, Makromolekulare Chemie, Rapid Communications, pp.16-861, 1995.

H. Kim and M. A. Winnik, Factors Affecting Interdiffusion Rates in Films Prepared from Latex Particles with a Surface Rich in Acid Groups and Their Salts, Macromolecules, vol.28, issue.6, pp.28-2033, 1995.
DOI : 10.1021/ma00110a042

H. Kim, Y. Wang, and M. A. , Winnik, Synthesis, structure and film-forming properties of poly(butyl methacrylate)-poly(methacrylic acid) core shell latex, Polymer, issue.8, pp.35-1779, 1994.

H. Kim and M. A. Winnik, Effect of surface acid group neutralization on interdiffusion rates in latex films, Macromolecules, vol.27, issue.4, pp.27-1007, 1994.
DOI : 10.1021/ma00082a019

Y. Wang, C. L. Zhao, and M. A. Winnik, Molecular diffusion and latex film formation: An analysis of direct nonradiative energy transfer experiments, The Journal of Chemical Physics, vol.95, issue.3, pp.95-2143, 1991.
DOI : 10.1063/1.461013

Y. Wang and M. A. Winnik, Polymer diffusion across interfaces in latex films, The Journal of Physical Chemistry, vol.97, issue.11, pp.97-2507, 1993.
DOI : 10.1021/j100113a008

C. L. Zhao, Y. Wang, Z. Hruska, and M. A. Winnick, Molecular aspects of latex film formation: an energy-transfer study, Macromolecules, vol.23, issue.18, pp.23-4082, 1990.
DOI : 10.1021/ma00220a009

M. Joanicot, V. Granier, and K. Wong, Structure of polymer within the coating: an atomic force microscopy and small angle neutrons scattering study, Progress in Organic Coatings, vol.32, issue.1-4, pp.32-109, 1997.
DOI : 10.1016/S0300-9440(97)00061-1

Y. Chevalier, C. Pichot, C. Graillat, M. Joanicot, K. Wong et al., Cabane, Film formation with latex particles, Colloid and Polymer Science, pp.270-806, 1992.
DOI : 10.1007/bf00776153

Y. Chevalier, Small-Angle Neutron Scaterring for Studying Latex Film Structure, pp.197-203, 1996.

Y. Chevalier, M. Hidalgo, J. Cavaillé, and B. Cabane, Small-Angle Neutron Scattering Studies of Composite Latex Film Structure, Progress in Organic Coatings, pp.32-35, 1997.
DOI : 10.1021/bk-1996-0648.ch016

K. Hahn, G. Ley, and R. Oberthür, On the particle coalescence in latex films, Colloid and Polymer Science, pp.264-1092, 1986.

K. Hahn, G. Ley, and R. Oberthür, On the particle coalescence in latex films (II), Colloid and Polymer Science, pp.266-631, 1988.

M. C. Goh, D. Juhué, O. M. Leung, Y. Wang, and M. A. Winnik, Annealing effects on the surface structure of latex films studied by atomic force microscopy, Langmuir, vol.9, issue.5, pp.1319-1322, 1993.
DOI : 10.1021/la00029a027

A. Goudy, M. L. Gee, S. Biggs, and S. Underwood, Atomic Force Microscopy Study of Polystyrene Latex Film Morphology: Effects of Aging and Annealing, Langmuir, vol.11, issue.11, pp.4454-4459, 1995.
DOI : 10.1021/la00011a045

K. L. Hoy, Estimating the effectiveness of latex coalescing aids, Journal of Paint Technology, issue.579, pp.45-51, 1973.

K. L. Hoy, Coalescence and film formation from latexes, Journal of Coating Technology, issue.853, pp.68-101, 1996.

D. Juhué and J. Lang, Latex film surface morphology studied by atomic force microscopy : effect of a non-ionic surfactant post-added to latex dispersion, Colloid and Surfaces, A : Physicochemical and Engineerig Aspects, pp.177-185, 1994.

D. Juhué and J. Lang, Effect of surfactant postadded to latex dispersion on film formation: a study by atomic force microscopy, Langmuir, vol.9, issue.3, pp.792-796, 1993.
DOI : 10.1021/la00027a031

D. Juhué, Y. Wang, J. Lang, O. Leung, M. C. Goh et al., Surfactant exudation in the presence of a coalescing aid in latex films studied by atomic force microscopy, Journal of Polymer Science, Part. B : Polymer Physics, pp.33-1123, 1995.

F. Lin and D. J. Meier, A Study of Latex Film Formation by Atomic Force Microscopy. 1. A Comparison of Wet and Dry Conditions, Langmuir, vol.11, issue.7, pp.2726-2733, 1995.
DOI : 10.1021/la00007a063

F. Lin and D. J. Meier, A Study of Latex Film Formation by Atomic Force Microscopy. 2. Film Formation vs Rheological Properties:?? Theory and Experiment, Langmuir, vol.12, issue.11, pp.12-2774, 1996.
DOI : 10.1021/la951554w

Y. J. Park, D. Y. Lee, M. C. Khew, and J. H. Kim, Atomic force microscopy study of PBMA latex film formation : effects of carboxylated random copolymer, Colloid and Surfaces, A : Physicochemical and Engineering Aspects, pp.139-188, 1998.

Y. J. Park, M. C. Khew, C. C. Ho, and J. H. Kim, Kinetics of latex formation of PBMA latex in the presence of alkali soluble resin using atomic force microscopy, Colloid & Polymer Science, vol.276, issue.8, pp.276-709, 1998.
DOI : 10.1007/s003960050300

Y. Wang, A. Kats, D. Juhué, and M. A. Winnik, Freeze-fracture studies of latex films formed in the absence and presence of surfactant, Langmuir, vol.8, issue.5, pp.1435-1442, 1992.
DOI : 10.1021/la00041a032

Y. Wang, D. Juhué, M. A. Winnik, O. M. Leung, and M. C. Goh, Atomic Force Microscopic study of latex film formation, Langmuir, issue.8, pp.760-762, 1992.

B. J. Roulstone, M. C. Wilkinson, J. Hearn, and A. J. Wilson, Studies on polymer latex films: I. A study of latex film morphology, Polymer International, vol.51, issue.2, pp.24-87, 1991.
DOI : 10.1002/pi.4990240205

Y. Wang, C. Zhao, and M. A. Winnik, Molecular diffusion and latex film formation: An analysis of direct nonradiative energy transfer experiments, The Journal of Chemical Physics, vol.95, issue.3, pp.2143-2153, 1995.
DOI : 10.1063/1.461013

M. A. Winnik and Y. Wang, Latex film formation at the molecular level : The effect of coalescing aids on polymer diffusion, Journal of Coating Technology, issue.811, pp.64-51, 1992.

H. J. Butt, R. Kuropka, and B. Christensen, Latex film formation studied with the atomic force microscope : influence of aging and annealing, Colloid and Polymer Science, pp.272-1218, 1994.

S. Lepizzera, C. Lhommeau, G. Dilger, T. Pith, and M. Lambla, Film-forming ability and mechanical properties of coalesced latex blends, Journal of Polymer Science Part B: Polymer Physics, vol.35, issue.13, pp.35-2093, 1997.
DOI : 10.1002/(SICI)1099-0488(19970930)35:13<2093::AID-POLB10>3.0.CO;2-#

J. Rottstegge, K. Landfester, M. Wilhelm, H. W. Spiess, and C. Heldmann, Different types of water in the film formation process of latex dispersions as detected by solid-state nuclear magnetic resonance spectroscopy, Colloid & Polymer Science, vol.278, issue.3, pp.278-236, 2000.
DOI : 10.1007/s003960050037

P. Mc-conville and J. M. Pope, 1 H NMR T 2 relaxation in contact lens hydrogels as a probe of water mobility, Polymer, pp.42-3559, 2001.

F. Mellinger, M. Wilhelm, K. Landfester, H. W. Spiess, A. Haunschild et al., Structure of water-containig latexes: Remagnetization effects during solid-state NMR spin-diffusion experiments, Acta Polymerica, pp.49-108, 1998.

F. M. Coyle, S. J. Martin, and V. J. Mcbrierty, Dynamics of water malecules in polymers, Journal of Molecular Liquids, pp.69-95, 1996.

U. Schulz and N. Kaiser, Near-infrared spectroscopy for monitoring water permeability of optical coatings on plastics, Applied Optics, vol.36, issue.4, pp.862-865, 1997.
DOI : 10.1364/AO.36.000862

G. Beaucage, T. A. Ulibarri, E. P. Black, and D. W. Schaefer, Multiple size scale structures in silicasiloxane composites studied by small angle scattering, in Hybrid organic-inorganic composites, pp.97-111, 1996.

Y. Rharbi, B. Cabane, A. Vacher, M. Joanicot, and F. Boué, Modes of deformation in a soft/hard nanocomposite: A SANS study, Europhysics Letters (EPL), vol.46, issue.4, pp.472-478, 1999.
DOI : 10.1209/epl/i1999-00287-1

M. Wagner, Renforcement des élastomères par les charges : Mobilité moléculaire et spécificité des interactions à l'interface silice/caoutchouc styrène-butadiène, 1997.

J. L. Leblanc, Rubber???filler interactions and rheological properties in filled compounds, Progress in Polymer Science, vol.27, issue.4, 2001.
DOI : 10.1016/S0079-6700(01)00040-5

S. Ono, Y. Kiuchi, J. Sawanobori, and M. Ito, Structure development in silica-filled rubber composites, Polymer International, pp.48-1035, 1999.

G. Tsagaropoulos and A. Eisenberg, Dynamic Mechanical Study of the factors affecting the two glas transition behavior of filled polymers. Similarities and differences with random ionomers, Macromolecules, pp.28-6067, 1995.

M. Y. Boluk and H. P. Schreiber, Interfacial interactions and the properties of filled polymers: I. Dynamic-mechanical responses, Polymer Composites, vol.6, issue.5, pp.295-301, 1986.
DOI : 10.1002/pc.750070506

Y. C. Ou, Z. Z. Yu, A. Vidal, and J. B. Donnet, Effects of alkylation of silicas on interfacial interaction and molecular motions between silicas and rubbers, Journal of Applied Polymer Science, vol.59, issue.8, pp.59-1321, 1996.
DOI : 10.1002/(SICI)1097-4628(19960222)59:8<1321::AID-APP16>3.0.CO;2-8

K. Mukhopadhyay, D. K. Tripathy, and S. K. De, Dynamic mechanical properties of silica-filled ethylene vinyl acetate rubber, Journal of Applied Polymer Science, vol.48, issue.6, pp.48-1089, 1993.
DOI : 10.1002/app.1993.070480615

F. Yatsuyanagi, H. Kaidou, and M. Ito, Relationship between Viscoelastic Properties and Characteristics of Filler-Gel in Filled Rubber System, Rubber Chemistry and Technology, vol.72, issue.4, pp.72-657, 1999.
DOI : 10.5254/1.3538824

J. Berriot, F. Lequeux, L. Monnerie, H. Montes, D. Long et al., Filler???elastomer interaction in model filled rubbers, a 1H NMR study, Journal of Non-Crystalline Solids, vol.307, issue.310, pp.307-310, 2002.
DOI : 10.1016/S0022-3093(02)01552-1

J. Leisen, J. Breidt, and J. Kelm, 1 H NMR relaxation studies of cured natural rubbers with different carbon black fillers, Rubber Chemistry and Technology, pp.72-73, 1999.

R. Simonutti, A. Comotti, F. Negroni, and P. Sozzani, 13 C and 29 Si solid state NMR of rubber-silica composite materials, Chemistry of Materials, issue.11, pp.822-828, 1999.

V. M. Litvinov and P. A. Steeman, EPDM-Carbon black interactions and the reinforcement mechanisms, as studied by low-resolution 1 H NMR, Macromolecules, pp.32-8476, 1999.

N. K. Dutta, N. R. Choudhury, B. Haidar, A. Vidal, and J. Donnet, High resolution solid-state NMR investigation of the filler-rubber interaction 1. High speed 1 H magic-angle spinning NMR spectroscopy in carbon black filled styrene-butadiene rubber, Polymer, issue.20, pp.35-4293, 1994.

R. Mansencal, B. Haidar, A. Vidal, L. Delmotte, and J. Chezeau, High???resolution solid???state NMR investigation of the filler???rubber interaction: 2. High???speed [1H] magic???angle spinning NMR spectroscopy in carbon???black???filled polybutadiene, Polymer International, vol.50, issue.4, pp.50-387, 2001.
DOI : 10.1002/pi.640.abs

J. O-'brien, E. Cashell, G. E. Wardell, and V. J. Mc-brierty, An NMR investigation of the interaction between Carbon Black and cis-polybutadiene, Macromolecules, issue.9, p.653, 1976.

W. Lin and F. D. Blum, Segmental dynamics of bulk and silica-adsorbed poly(methyl acrylate)-d3 by deuterium NMR: the effect of molecular weight, Macromolecules, pp.31-4135, 1998.

H. Kang and F. D. Blum, Structure and dynamics of amino functional silanes adsorbed on silica surfaces, The Journal of Physical Chemistry, vol.95, issue.23, pp.95-9391, 1991.
DOI : 10.1021/j100176a065

R. Soltani, F. Lauprêtre, L. Monnerie, P. Teyssié, and N. M. , investigation of interphases and microphase composition in (methylmethacrylate)-b-(n-butylmethacrylate) block copolymers, Polymer, issue.15, pp.39-3297, 1998.

P. Mélé, S. Marceau, D. Brown, Y. De-puydt, and N. D. Albérola, Reinforcement effects in fractalstructure-filled rubber, Polymer, pp.43-5577, 2002.

C. Becker, H. Krug, and H. Schmidt, Tailoring of Thermomechanical Properties of Thermoplastic Nanocomposites by Surface Modification of Nanoscale Silica Particles, MRS Symposia Proceedings, 1996.
DOI : 10.1002/pen.760282409

A. R. Payne, Dynamic properties of fillled-loaded rubbers, in Reinforcement of elastomers, 1965.

G. Kraus, Mechanical losses in carbon black filled rubbers, Journal of Applied Polymer Science, vol.39, pp.75-92, 1984.

P. G. Maier and D. Göritz, Molecular interpretation of the Payne effect, pp.49-67, 1996.

C. Gauthier, E. Reynaud, R. Vassoille, L. David, L. Ladouce et al., Mechanical behavior of silica filled rubber : non linear effects, Eurofillers 99, 1999.

A. Lapra, Caractérisation moléculaire et propriétés mécaniques des réseaux élastomères SBR renforcés par de la silice, 1999.

C. Becker, P. Mueller, and H. K. Schmidt, <title>Optical and thermomechanical investigations on thermoplastic nanocomposites with surface-modified silica nanoparticles</title>, Organic-Inorganic Hybrid Materials for Photonics, pp.3469-88, 1998.
DOI : 10.1117/12.312908

N. D. Alberola, K. Benzarti, C. Bas, and Y. Bomal, Interface effects in elastomers reinforced by modified precipitated silica, Polymer Composites, vol.6, issue.61, pp.22-312, 2001.
DOI : 10.1002/pc.10540

P. Espiard, A. Guyot, J. Perez, G. Vigier, and L. David, Poly(ethyl acrylate) latexes encapsulating nanoparticles of silica: 3. Morphology and mechanical properties of reinforced films, Polymer, vol.36, issue.23, pp.36-4397, 1995.
DOI : 10.1016/0032-3861(95)96845-Y

P. Espiard and A. Guyot, Poly (ethyl acrylate) latexes encapsulating nanoparticles of silica, 2. Grafting process onto silica, Polymer, pp.36-4391, 1995.

E. Bourgeat-lami, P. Espiard, and A. Guyot, Poly(ethyl acrylate) latexes encapsulating nanoparticles of silica 1. Functionalisation and dispersion of silica, Polymer, issue.23, pp.36-4385, 1995.

E. Bourgeat-lami, P. Espiard, A. Guyot, C. Gauthier, L. David et al., Emulsion polymerization in the presence of colloidal silica particles, Die Angewandte Makromolekulare Chemie, pp.242-105, 1996.

E. Bourgeat-lami and J. Lang, Encapsulation of inorganic particles by dispersion polymerization in polar media 1. Silica nanoparticles encapsulated by polystyrene, Journal of Colloid and Interface Science, pp.293-308, 0197.

Z. Pu, J. E. Mark, J. M. Jethmalani, and W. T. Ford, Mechanical properties of a poly(methyl acrylate) nanocomposite containing regularly-arranged silica particles, Polymer Bulletin, vol.27, issue.4, pp.545-551, 1996.
DOI : 10.1007/BF00556818

Z. Pu, J. E. Mark, J. M. Jethmalani, and W. T. Ford, Effects of Dispersion and Aggregation of Silica in the Reinforcement of Poly(methyl acrylate) Elastomers, Chemistry of Materials, vol.9, issue.11, pp.2442-2447, 1997.
DOI : 10.1021/cm970210j

Z. Hashin, The Elastic Moduli of Heterogeneous Materials, Journal of Applied Mechanics, vol.29, issue.1, pp.143-150, 1962.
DOI : 10.1115/1.3636446

Z. Hashin, Viscoelastic moduli of heterogeneous media, Journal of Applied Mechanics, vol.42, pp.630-636, 1965.

R. A. Dickie, Heterogeneous polymer???polymer composites. I. Theory of viscoelastic properties and equivalent mechanical models, Journal of Applied Polymer Science, vol.17, issue.1, pp.17-45, 1973.
DOI : 10.1002/app.1973.070170104

A. Reuss, Berechnung der Fliessgrense von mischkritallen auf grung der plastizitatsbedingung und mechanick, pp.49-58, 1929.

T. D. Hirsch, Modulus of elasticity of concrete affected by elastic moduli of cement paste matrix aggregate, Journal of the American Concrete Institute, pp.59-427, 1962.

M. Takayanagi, K. Imada, and T. Kajiyama, Mechanical properties and fine structure of drawn polymers, Journal of Polymer Science Part C: Polymer Symposia, vol.2, issue.1, pp.15-263, 1966.
DOI : 10.1002/polc.5070150118

M. Takayanagi, S. Uemura, and S. Minami, Application of equivalent model method to dynamic rheooptical properties of crystalline polymer, Journal of Polymer Science, pp.5-113, 1964.

N. Ouali, Etude de la déformation non élastique (faible et forte contrainte) de polymères amorphes monophasés et polyphasés base PMMA, Thèse de l'INSA de Lyon, 1992.

N. Ouali, J. Cavaillé, and J. Perez, Elastic, viscoelastic and plastic behavior of multiphase polymer blends, Plast. Rubb. Comp. Proc. Appl, pp.16-55, 1991.
URL : https://hal.archives-ouvertes.fr/hal-00310274

N. D. Alberola and P. Mélé, Viscoelasticity of polymers filled by rigid or soft particles: Theory and experiment, Polymer Composites, vol.16, issue.5, pp.751-759, 1996.
DOI : 10.1002/pc.10667

R. M. Christensen, Mechanics of Composite Materials, Journal of Applied Mechanics, vol.47, issue.2, 1979.
DOI : 10.1115/1.3153710

Z. Hashin, Analysis of Composite Materials???A Survey, Journal of Applied Mechanics, vol.50, issue.3, pp.481-505, 1983.
DOI : 10.1115/1.3167081

E. Hervé, C. Stolz, and A. Zaoui, A propos de l'assemblage de sphères composites de Hashin, Comptes-Rendus de l'Académie des Sciences, pp.313-857, 1991.

J. D. Eshelby, The determination of the elastic field of an ellipsoidal inclusion and related problems, Proceedings of the Royal Society of London, pp.241-376, 1957.

R. Hill, Continuum micro-mechanics of elastoplastic polycrystals, Journal of the Mechanics and Physics of Solids, vol.13, issue.2, pp.89-101, 1965.
DOI : 10.1016/0022-5096(65)90023-2

R. Hill, A self-consistent mechanics of composite materials, Journal of the Mechanics and Physics of Solids, vol.13, issue.4, pp.213-222, 1965.
DOI : 10.1016/0022-5096(65)90010-4

B. Budiansky, On the elastic moduli of some heterogeneous materials, Journal of the Mechanics and Physics of Solids, vol.13, issue.4, pp.223-227, 1965.
DOI : 10.1016/0022-5096(65)90011-6

E. H. Kerner, The Elastic and Thermo-elastic Properties of Composite Media, Proceedings of the Physical Society, pp.69-808, 1956.
DOI : 10.1088/0370-1301/69/8/305

R. M. Christensen and K. H. Lo, Solutions for effective shear properties in three phase sphere and cylinder models, Journal of the Mechanics and Physics of Solids, vol.27, issue.4, pp.34-639, 1986.
DOI : 10.1016/0022-5096(79)90032-2

E. Hervé and A. , inclusion-based micromechanical modelling, International Journal of Engineering Science, vol.31, issue.1, pp.1-9, 1993.
DOI : 10.1016/0020-7225(93)90059-4

Z. Hashin, Complex moduli of viscoelastic composites???I. General theory and application to particulate composites, International Journal of Solids and Structures, vol.6, issue.5, pp.539-552, 1970.
DOI : 10.1016/0020-7683(70)90029-6

P. Mélé, Facteurs d'échelle dans l'analyse du comportement mécanique de composites particulaires -Rôle de l'interface et du couplage mécanique entre phases, 1995.

M. Shaterzadeh, Etude et modélisation physique et mécanique du composrtement viscoélastique et plastique de composites particulaires, Thèse de l'INSA de Lyon, 1997.

E. Reynaud, Etude des relations structure-propriétés mécaniques de thermoplastiques renforcés par des particules inorganiques nanoscopiques, Thèse de l'INSA de Lyon, 2000.

A. I. Medalia, Filler aggregates and their effects on dynamic properties of rubber vulcanizates, Colloques internationaux du CNRS, 1973.

D. Quemada, Rheological modelling of complex fluids. I. The concept of effective volume fraction revisited, The European Physical Journal Applied Physics, vol.1, issue.1, pp.119-127, 1998.
DOI : 10.1051/epjap:1998125

P. Hajji, Etude des relations synthèse-morphologie-propriétés mécaniques de nanocomposites hybrides polymère-silice : application au renforcement mécanique des verres, 1999.

N. Agarwal and R. J. Farris, Thermodynamics of deformation of latex blends coatings and their properties, Journal of Coating Technology, issue.896, pp.71-61, 1999.

V. Favier, Etude de nouveaux composites obtenus à partir de latex filmogènes et de whiskers de cellulose : effets de percolation mécanique, Thèse de l'Institut National Polytechnique de Grenoble, 1995.

V. Favier, H. Cahnzy, and J. Y. Cavaille, Polymer Nanocomposites Reinforced by Cellulose Whiskers, Macromolecules, vol.28, issue.18, pp.28-6365, 1995.
DOI : 10.1021/ma00122a053

URL : https://hal.archives-ouvertes.fr/hal-00310722

V. Favier, R. Dendieve, G. R. Canova, J. Y. Cavaille, and P. Gilormini, Simulation and modeling of three-dimensional percolating structures: Case of a latex matrix reinforced by a network of cellulose fibers, Acta Materialia, vol.45, issue.4, pp.45-1557, 1997.
DOI : 10.1016/S1359-6454(96)00264-9

D. Stauffer, Introduction to percolation theory, 1992.

D. Stauffer, A. Coniglio, and M. Adam, Gelation and critical phenomena, Advanced Polymer Science, pp.44-103, 1982.
DOI : 10.1007/3-540-11471-8_4

S. Kirkpatrick, Percolation and conduction, Review of Modern Physics, pp.574-587, 1973.

J. Kolarik, Simultaneous prediction of the modulus, tensile strength and gas permeability of binary polymer blends, European Polymer Journal, vol.34, issue.5-6, pp.585-590, 1998.
DOI : 10.1016/S0014-3057(97)00176-6

W. Hsu and S. Wu, Percolation behavior in morphology and modulus of polymer blends, Polymer Engineering and Science, vol.16, issue.5, pp.293-302, 1993.
DOI : 10.1002/pen.760330509

E. Chabert, Propriétés mécaniques de nanocomposites à matrice polymère, Thèse de l'INSA de Lyon, 2002.

M. A. Sharaf, A. Kloczkowski, and J. E. Mark, Monte Carlo simulations on reinforcement of an elastomer by oriented prolate particles, Computational and Theoretical Polymer Science, pp.251-262, 2001.

M. A. Sharaf and J. E. Mark, Monte Carlo simulations on filler-induced network chain deformations and elastomer reinforcement from oriented oblate particles, Polymer, vol.43, issue.2, pp.43-643, 2002.
DOI : 10.1016/S0032-3861(01)00545-6

F. W. Starr, T. B. Schrøder, and S. C. Glotzer, Effects of a nanoscopic filler on the structure and dynamics of a simulated polymer melt and the relationship to ultrathin films, Physical Review E, vol.64, issue.2, pp.64-21802, 2001.
DOI : 10.1103/PhysRevE.64.021802

F. W. Starr, T. B. Schrøder, and S. C. Glotzer, Molecular Dynamics Simulation of a Polymer Melt with a Nanoscopic Particle, Macromolecules, vol.35, issue.11, pp.35-4481, 2002.
DOI : 10.1021/ma010626p

M. Vacatello, Monte Carlo Simulations of Polymer Melts Filled with Solid Nanoparticles, Macromolecules, vol.34, issue.6, pp.1946-1952, 2001.
DOI : 10.1021/ma0015370

M. Vacatello, Molecular Arrangements in Polymer-Based Nanocomposites, Macromolecular Theory and Simulations, vol.11, issue.7, pp.501-512, 2002.
DOI : 10.1002/1521-3919(20020901)11:7<757::AID-MATS757>3.0.CO;2-I

M. Vacatello, Chain Dimensions in Filled Polymers:?? An Intriguing Problem, Macromolecules, vol.35, issue.21, pp.35-8191, 2002.
DOI : 10.1021/ma020416s

M. Vacatello, Molecular Arrangements in polymer-based nanocomposites, Macromolecular Theory and simulation, pp.501-512, 2002.

A. Sikorski, Structure of adsorbed polymer chains: a Monte Carlo study, Macromolecular theory and simulations, pp.359-364, 2002.

I. Bitsanis and G. Hadziioannou, Molecular dynamics simulations of the structure and dynamics of confined polymer melts, The Journal of Chemical Physics, vol.92, issue.6, pp.92-3827, 1990.
DOI : 10.1063/1.457840

D. E. Hanson, A mesoscale strength model for silica-filled polydimethylsiloxane based on atomistic forces obtained from molecular dynamics simulations, The Journal of Chemical Physics, vol.113, issue.17, pp.113-7656, 2000.
DOI : 10.1063/1.1313536

M. S. Ozmusul and R. C. Picu, Structure of polymers in the vicinity of convex impenetrable surfaces: the athermal case, Polymer, vol.43, issue.17, pp.43-4657, 2002.
DOI : 10.1016/S0032-3861(02)00316-6

F. W. Starr, T. B. Schrøder, and S. C. Glotzer, Effects of a nanoscopic filler on the structure and dynamics of a simulated polymer melt and the relationship to ultrathin films, Physical Review E, vol.64, issue.2, pp.64-021802, 2001.
DOI : 10.1103/PhysRevE.64.021802

L. Zhang, A. Xia, X. Wang, and D. L. Zhao, A molecular study on the reinforcement of polymethylene elastomers, European Polymer Journal, vol.38, issue.10, pp.38-2063, 2002.
DOI : 10.1016/S0014-3057(02)00084-8

D. Brown, P. Mélé, S. Marceau, and N. D. Albérola, A Molecular Dynamics Study of a Model Nanoparticle Embedded in a Polymer Matrix, Macromolecules, vol.36, issue.4, pp.36-1395, 2003.
DOI : 10.1021/ma020951s

M. C. Wilkinson, J. Hearn, and P. A. Stewart, The cleaning of polymer colloids, Advances in Colloid and Interface Science, vol.81, issue.2, pp.81-77, 1999.
DOI : 10.1016/S0001-8686(98)00084-0

E. Odrobina, J. Feng, and M. A. Winnik, Effect of oligomers on the polymer diffusion rate in poly(butyl methacrylate) latex films, Journal of Polymer Science, Part. A : Polymer Chemistry, pp.38-3933, 2000.

M. Suchoparek, J. Spevacek, and M. Bohumil, Stereochemical structures of somme polyacrylates studied by one-dimensional and two-dimensional 13 C-1 H N, M.R. spectroscopy, Polymer, issue.16, pp.35-3389, 1994.

A. Caquot, Rôle des matériaux inertes dans le béton, 1935.

F. Clément, Etude des mécanismes de renforcement dans les réseaux polydiméthylsiloxane chargés silice, Thèse de l, 1999.

F. Clément, A. Lapra, L. Bokobza, L. Monnerie, and P. Ménez, Atomic force microscopy investigation of filled elastomers and comparison with transmission electron microscopy ??? application to silica-filled silicone elastomers, Polymer, vol.42, issue.14, pp.42-6259, 2001.
DOI : 10.1016/S0032-3861(01)00058-1

A. Lapra, L. Bokobza, L. Monnerie, and P. Ménez, Atomic force microscopy investigation in silica filled elastomers under strain, Eurofillers 99, 1999.

J. Oberdisse, Y. Rharbi, and F. Boué, Simulation of aggregate structure and SANS-spectra in filled elastomers, Computational and Theorical Polymer Science, pp.10-207, 2000.

C. Maestrini, M. Merlotti, M. Vighi, and E. Malaguti, Second phase volume fraction and rubber particle size determinations in rubber-toughtened polymers: a simple stereological approach and its application to the case of high impact polystyrene, Journal of Materials Science, pp.27-5994, 1992.

J. F. Gouyet, R. Motomatsu, T. Takahashi, N. Heng-yong, W. Mizutani et al., Physique et structures fractales Microstructure study of acrylic polymer-silica nanocomposite surface by scanning force microscopy, Polymer, issue.1, pp.38-177, 1992.

P. Hajji, L. David, J. F. Gérard, J. P. Pascault, and G. Vigier, Synthesis, morphology and mechanical behavior of nanocomposites based on hydroxyethyl methacrylate and silica, Eurofillers 99

A. Abragam, S. R. Hartmann, and E. L. Hahn, Les principes du magnétisme nucléaire Presses Universitaires de France 170 Nuclear double resonance in the rotating frame, Physical Review, pp.128-2042, 1961.

M. Mehring, Principles of high resolution NMR in solids, 1983.
DOI : 10.1007/978-3-642-68756-3

R. A. Komorowski, High Resolution NMR Spectroscopy of Synthetic Polymers in Bulk, 1986.

F. Lauprêtre, L. Monnerie, and J. Virlet, Magic-angle carbon-13 nuclear magnetic resonance study of local motions in solid poly(alkyl methacrylates), Macromolecules, pp.17-1397, 1984.
DOI : 10.1021/ma00137a017

N. D. Albérola, C. Bas, and P. Mélé, Composites particulaires: modélisation du comportement viscoélastique assorti du concept de percolation, Comptes Rendus de l'Académie des Sciences, pp.319-1129, 1994.

L. Mullins and N. R. Tobin, Theorical model for the elastic behavior of filler-reinforced vulcanized rubbers, Rubber Chemistry and Technology, pp.555-571, 1957.

C. Silva, Architecture et propriétés viscoélastiques linéaires et non linéaires de composites SBR/silice, 2001.

F. Bueche, Mullins effect and rubber???filler interaction, Journal of Applied Polymer Science, vol.5, issue.15, pp.271-281, 1961.
DOI : 10.1002/app.1961.070051504

F. Bueche, Molecular basis for the mullins effect, Journal of Applied Polymer Science, vol.4, issue.10, pp.107-114, 1960.
DOI : 10.1002/app.1960.070041017

B. B. Boonstra, Reinforcement of polyethylene by carbon black, in Reinforcement of elastomers, pp.529-561, 1965.

E. M. Dannenberg, The effects of surface chemical interactions on the properties of fillerreinforced rubbers, Rubber Chemistry and Technology, pp.410-444, 1975.

T. A. Vilgis and G. Heinrich, Disorder-Induced Enhancement of Polymer Adsorption - A Model for the Rubber-Polymer Interaction in Filled Rubbers, Macromolecules, vol.27, issue.26, pp.27-7846, 1994.
DOI : 10.1021/ma00104a047

M. J. Wang, The role of filler networking in the dynamic properties of filled rubber, Rubber Chemistry and Technology, pp.72-430, 1998.

Z. Hashin and S. Shtrickman, A variational approach to the theory of the elastic behavior of multiple materials, Journal of the Mechanics and Physics of Solids, issue.11, pp.127-140, 1963.

E. , D. Gado, L. De-arcangelis, and A. Coniglio, Elastic properties at the sol-gel transition, Europhysics Letters, vol.46, issue.3, pp.288-294, 1999.

N. D. Alberola, K. Benzarti, C. Bas, L. Ladouce, and Y. Bomal, Interface effects in elastomers reinforced by modified precipitated silica, Eurofillers 99, 1999.
DOI : 10.1002/pc.10540

X. Jing, W. Zhao, and L. Lan, The effect of particle size on elactric conducting percolation threshold in polymer/conducting particle composites, Journal of Materials Science Letters, pp.19-399, 2000.

G. Heinrich, M. Klüppel, and T. A. , Vilgis, Reinforcement of elastomers, Current Opinion in Solid State and Materials Science, pp.6-9, 2002.

E. Guth and O. Gold, On the hydrodynamical theory of the dynamic properties of filled suspensions, Physical Review, pp.53-322, 1938.

D. Brown, The gmq User Manual Version 3, 1999.

J. P. Ryckaert, I. R. Mcdonald, and M. L. Klein, Disorder in the pseudohexagonal rotator phases of nalkanes : molecular dynamics calculations for tricosane, Molecular Physics, pp.67-957, 1989.

U. C. Singh and P. A. Kollman, An approach to computing electrostatic charges for molecules, Journal of Computational Chemistry, vol.77, issue.2, pp.129-145, 1984.
DOI : 10.1002/jcc.540050204

P. K. Weiner and P. A. Kollman, AMBER: Assisted model building with energy refinement. A general program for modeling molecules and their interactions, Journal of Computational Chemistry, vol.100, issue.3, pp.287-303, 1981.
DOI : 10.1002/jcc.540020311

B. R. Brook, R. E. Bruccoleri, B. D. Olafson, D. J. States, S. Swaminathan et al., CHARMM: A program for macromolecular energy, minimization, and dynamics calculations, Journal of Computational Chemistry, vol.I, issue.2, pp.187-217, 1983.
DOI : 10.1002/jcc.540040211

N. L. Allinger, Conformational analysis. 130. MM2. A hydrocarbon force field utilizing V1 and V2 torsional terms, Journal of the American Chemical Society, pp.99-8127, 1997.

N. L. Allinger, Y. H. Yuh, and J. H. Lii, Molecular mechanics. The MM3 force field for hydrocarbons. 1, Journal of the American Chemical Society, vol.111, issue.23, pp.111-8551, 1989.
DOI : 10.1021/ja00205a001

M. C. Clark, R. D. Cramer, and N. , Van Opdenbosch, Validation of the general purpose TRIPOS 5.2 force field, Journal of Computational Chemistry, issue.8, pp.10-982, 1989.

D. Brown and J. H. Clarke, A loose-coupling, constant-pressure, molecular dynamics algorithm for use in the modelling of polymer materials, Computer Physics Communications, vol.62, issue.2-3, pp.62-360, 1991.
DOI : 10.1016/0010-4655(91)90107-V

D. Brown and S. Neyertz, A general pressure tensor calculation for molecular dynamics simulations, Molecular Physics, vol.98, issue.3, pp.577-595, 1995.
DOI : 10.1002/actp.1994.010450401

D. Brown, H. Minoux, and B. Maigret, A domain decomposition parallel processing algorithm for molecular dynamics simulations of systems of arbitrary connectivity, Computer Physics Communications, vol.103, issue.2-3, pp.170-186, 1997.
DOI : 10.1016/S0010-4655(97)00040-4

D. Brown and B. Maigret, Large Scale Molecular Dynamics Simulations using the Domain Decomposition Approach, Speedup, pp.33-40, 1999.

J. D. Ferry, Viscoelastic properties of polymers John Wiley and Sons 205 Preparation of bulk melt chains configurations of polycyclic polymers, Journal of Chemical Physics, pp.115-708, 1980.

P. J. Flory, Statistical mechanics of chains molecules Equation of state calculations by fast computing machines, Journal of Chemical Physics, vol.35, issue.21, pp.1087-1099, 1953.

S. Neyertz, D. Brown, A. Douanne, C. Bas, and N. D. Albérola, The Molecular Structure and Dynamics of Short Oligomers of PMDA-ODA and BCDA-ODA Polyimides in the Absence and Presence of Water, The Journal of Physical Chemistry B, vol.106, issue.18, pp.106-4617, 2002.
DOI : 10.1021/jp0131525

S. Neyertz and D. Brown, Preparation of bulk melt chain configurations of polycyclic polymers, The Journal of Chemical Physics, vol.115, issue.2, pp.115-708, 2001.
DOI : 10.1063/1.1379073

B. W. Van-beest and G. J. Kramer, Force fields for silicas and aluminophosphates based on ab initio calculations, Physical Review Letters, issue.16, pp.64-1955, 1990.

A. Brodka and T. W. Zerda, Properties of liquid acetone in silica pores: Molecular dynamics simulation, The Journal of Chemical Physics, vol.104, issue.16, pp.6319-6326, 1996.
DOI : 10.1063/1.471292

P. Gallo, M. Rovere, M. A. Ricci, C. Hartnig, and E. Spohr, Evidence of glassy behaviour of water molecules in confined states, Philosophical Magazine Part B, vol.59, issue.11-12, pp.79-1923, 1999.
DOI : 10.1080/13642819908223078

L. S. Hi and P. J. Rossky, A comparison of the structure and dynamics of liquid water at hydrophobic and hydrophilic surfaces. A molecular simulation study, Journal of Chemical Physics, pp.100-3334, 1994.

S. Tsuyenuki, Molecular dynamics simulations of silica with a first-principles interactomic potential, Molecular Engineering, pp.157-182, 1996.

K. Vollmayr, W. Kob, and K. Binder, Cooling-rate effects in amorphous silica: A computer-simulation study, Physical Review B, vol.54, issue.22, pp.54-15808, 1996.
DOI : 10.1103/PhysRevB.54.15808

H. J. Berendsen, J. R. Grigera, and T. P. Straatsma, The missing term in effective pair potentials, The Journal of Physical Chemistry, vol.91, issue.24, pp.91-6269, 1987.
DOI : 10.1021/j100308a038

D. M. Heyes, Physical properties of liquid water by molecular dynamics simulations, Journal of the Chemical Society, Faraday Transactions, vol.90, issue.20, pp.90-3039, 1994.
DOI : 10.1039/ft9949003039

D. Brown and J. H. Clarke, ???butane, The Journal of Chemical Physics, vol.92, issue.5, pp.92-3062, 1990.
DOI : 10.1063/1.457904

I. M. Ward, Mechanical properties of polymers, 1983.

P. H. Vollenberg and D. Heinkens, The effect of particle size on the mechanical properties of composites, Composites Interfaces, 1986.

D. Brown and J. H. Clarke, Molecular dynamics simulation of an amorphous polymer under tension I. Phenomenology, Macromolecules, pp.24-2075, 1991.