.. Le-système-d-'acquisition-vidéo, 54 3.1. L'imagerie par transmission, p.55

S. Les, 55 4.1. La source incohérente, p.56

.. La-synchronisation-des-sources-de-lumière, 57 5.1. Synchronisation sur la commande de l'injecteur, Prise en compte de la fluctuation de l'injection, p.57

.. Un-exemple-d-'analyse-morphologique-de-rayleigh, 83 3.2. Analyse morphologique par segments, p.84

.. Mesure-du-taux-de-croissance-spatial, P. O. De-la, and .. , Application à la mesure de la longueur d'onde90 3.5. Critique du modèle Application, p.95

/. Comparaison-entropie and .. Écart-type, 95 4.3. L'analyse entropique appliquée à des séries d'images, p.161

L. 'investigation-du-champ-proche and .. , 167 2.1. L'analyse des structures internes du jet Diesel, p.180

L. 'analyse-morphologique-de-la-phase-liquide-continue and .. , 192 2.5.a Définition des paramètres morphologiques, 0195.

L. Analyses, 3) sont menées dans les mêmes conditions expérimentales que la section précédente. Le volume de mesure, le seuil sur le contraste des gouttes et la définition du filtre morphologique restent par conséquent inchangés pour ces analyses. 4.1. Suivi temporel à 30 mm de l'injecteur figure 5-79 Indication du nombre de gouttes pour l'analyse temporelle à la période quasi-stationnaire de l'injection

T. Le-constat-des-limites-de-la and . Fait, des ébauches de solutions se sont imposées : Gabor, proposa la TF à fenêtres : l'analyse de Fourier s'applique alors sur le signal morceau par morceau, on applique à la fonction le cosinus

Y. Mayer, (un mathématicien) s'intéressa en 1985 aux travaux d'un analyste du signal Alex Grossman

S. Adeline, Etude expérimentale d'instabilités interfaciales d'un jet liquide par analyse d'image et transformée en ondelettes, Thèse soutenue à la facultée de Rouen, 1999.

R. Aldasoro and C. Carlos, Image Segmentation with Kohonen Network Self- Organising Maps, International Conference on Telecommunication, 2000.

S. Amara, N. Lévy, J. Champoussin, and N. Guerrassi, Effet de la temp??rature sur la taille des gouttes d'un jet diesel, Revue G??n??rale de Thermique, vol.36, issue.1, pp.51-58, 1997.
DOI : 10.1016/S0035-3159(99)80065-8

C. Arcoumanis, M. Gavaises, H. Flora, and H. Roth, Visualisation of cavitation in Diesel engine injectors, pp.375-381, 2001.

B. Aupoix, Introduction to Turbulence Modelling for Compressible Flows " von Karman Lectures Series, 2002.

C. Badock, R. Wirth, A. Fath, and A. Leipertz, Application of Laser Light Sheet Technique for the Investigation of Cavitation Phenomena in Real Size Diesel Injection Nozzles, ILASS'98, pp.236-241, 1998.

C. Badock, R. Wirth, A. Fath, and A. Leipertz, Investigation of cavitation in real size diesel injection nozzles, International Journal of Heat and Fluid Flow, vol.20, issue.5, pp.538-544, 1999.
DOI : 10.1016/S0142-727X(99)00043-0

C. Badock, R. Wirth, and C. Tropéa, The influence of Hydro Grinding on Cavitation Inside a Diesel Injection Nozzle and Primary Break-up under unsteady pressure conditions, ILASS'99, 1999.

C. Bae, J. Yu, J. Kang, J. Kong, R. Cuenca et al., The influence of Injector Parameters on Diesel Spray, Conference on Thermo and Fluid Dynamic Processes in Diesel Engines (THIESEL), 2002.

C. Baumgarten, J. Stegemann, and G. P. Merker, A new Model for Cavitation induced Primary Break-up of Diesel Sprays, 2002.

C. Baumgarten, J. Shi, R. Busch, and G. P. Merker, Numerical and Experimental investigations of cavitating flow in high pressure Diesel Nozzles, Ilass-Europe, vol.13, 2001.

I. Baz, Contribution à la Caractérisation de la Cavitation dans les Injecteurs Diesel à Haute Pression, Thèse de Doctorat à l'école Centrale de Lyon soutenue le 16 juin, 2003.

W. Bergwerk, Flow pattern in diesel nozzle spray holes, Proc. Inst. Mech
DOI : 10.1243/PIME_PROC_1959_173_054_02

J. Blaisot and M. Ledoux, Simultaneous measurement of diameter and position of spherical particles in a spray by an original imaging method, Applied Optics, vol.37, issue.22, pp.5137-5144, 1998.
DOI : 10.1364/AO.37.005137

G. Brenn and A. Frohn, An experimental method for the investigation of droplet oscillations in a gaseous medium, Experiments in Fluids, vol.15, issue.2, pp.85-90, 1993.
DOI : 10.1007/BF00190947

C. Buraga, S. Coëtmellec, C. Özkul, and D. Lebrun, Application of wavelet transform to hologram analysis: three-dimensional location of particles, Optics and Lasers in Engineering, vol.33, issue.6, pp.409-421, 2000.
DOI : 10.1016/S0143-8166(00)00050-6

R. Calabria and P. Massoli, Generalized scattering imaging : A 2-D technique to measure size and optical properties of droplets in sprays, ILLAS-Europe, 2001.

F. Carosone, A. Cenedese, and G. Querzoli, Recognition of partially overlapped particle images using the Kohonen neural network, Experiments in Fluids, vol.19, issue.4, pp.225-232, 1995.
DOI : 10.1007/BF00196470

A. Cavaliere, R. Ragucci, A. D-'alesio, and C. Noviello, Analysis of diesel sprays through two-dimensional laser light scattering, 22 th International Symposium on Combustion/The combustion Institue, pp.1973-1981, 1988.
DOI : 10.1016/S0082-0784(89)80212-7

C. T. Chang and P. V. Farrell, Spray Characteristics and Near Injector Tip Effects of Injection Pressure and Ambient Density, COMODIA, pp.465-470, 1998.

H. Chaves, M. Knapp, A. Kubitzek, F. Obermeier, and T. Schneideri, Experimental Study of Cavitation in the Nozzle Hole of Diesel Injectors Using Transparent Nozzles, SAE Technical Paper Series, pp.199-211, 1995.
DOI : 10.4271/950290

H. Chaves and F. Obermeier, Correlation Between Light Absorption signals of cavitating nozzles flow within and outside of the hole of a transparent Diesel Injection nozzle, ILASS'98, pp.224-229, 1998.

N. Chigier, Optical imaging of sprays, Progress in Energy and Combustion Science, vol.17, issue.3, pp.211-262, 1991.
DOI : 10.1016/0360-1285(91)90011-B

M. Coster and J. L. Chermant, Précis d'analyse d'images, presse du CNRS, 1989.

N. Damaschke, H. Nobach, and C. Tropea, Optical limits of particle concentration for multi-dimensional particle sizing techniques in fluid mechanics, Experiment in fluid, N° 32, pp.143-152, 2002.

G. G. Daves, R. O. Buckius, J. E. Peters, and A. R. Schroeder, Morphology Descriptors of Irregularly Shaped Particles from Two-Dimensional Images, Aerosol Science and Technology, vol.19, issue.2, pp.199-212, 1994.
DOI : 10.1016/0016-2361(88)90010-5

J. Dechoz, Influence de la pression sur la tension superficielle des alcanes et des carburants. Mesures et modélisation, Thèse soutenue à l'université de Rouen le 2 juillet, 2002.

L. G. Dodge, D. J. Rhodes, and R. D. Reitz, Drop-size measurement techniques for sprays: comparison of Malvern laser-diffraction and Aerometrics phase/Doppler, Applied Optics, vol.26, issue.11, pp.2144-2154, 1987.
DOI : 10.1364/AO.26.002144

R. Domann and Y. Hardalapulas, Evaluation of the Planar Droplet Sizing (PDS) Technique, p.31, 2000.

C. Dumouchel and H. Malot, Development of a three-parameter volume-based spray drop size distribution through the application of the maximum entropy formalism, Part. Part. Syst. Charac, vol.1632, pp.220-228, 1999.

E. Fantini, L. Tognotti, and A. Tonazzini, Drop size distribution in sprays by image processing, Computers & Chemical Engineering, vol.14, issue.11, pp.1201-1211, 1990.
DOI : 10.1016/0098-1354(90)80002-S

A. Fath, K. Münch, and A. Leipertz, Spray Break-Up Process of Diesel Fuel Investigated Close to the Nozzle, ICLASS'97, pp.513-520, 1997.
DOI : 10.1615/InterJFluidMechRes.v24.i1-3.250

A. Fath, C. Fettes, and A. Leipertz, Investigation of the Diesel Spray Break-Up Close to the Nozzle at different Injection Conditions, COMODIA symposium, vol.35, pp.429-434, 1998.

A. G. Favenec and D. H. Fruman, Effect of the needle position on the cavitation, Proceedings of the 3 rd ASME/JSME conference, 1999.

J. P. Franc, F. Avelan, B. Belahadji, and J. Y. Billard, La cavitation Mécanismes Physiques et Aspects Industriels, Presse universitaire de Grenoble, 1995.

B. R. Frieden, Statistical models for the image restoration problem, Computer Graphics and Image Processing, vol.12, issue.1, pp.40-59, 1980.
DOI : 10.1016/0146-664X(80)90003-9

L. C. Ganippa, G. Bark, S. Anderson, and J. Chomiak, Comparison of Cavitation Phenomena in a Transparent scaled-up Single-Hole Diesel Nozzles, CAV2001:session A9.005, 2001.

E. J. Garboczi, Three-dimensional mathematical analysis of particle shape using X-ray tomography and spherical harmonics: Application to aggregates used in concrete, Cement and Concrete Research, vol.32, issue.10, pp.1621-1638, 2002.
DOI : 10.1016/S0008-8846(02)00836-0

H. G. Fujimoto, K. Tanaka, H. Kuzuwata, and J. Senda, Effect of internal flow in a simulated Diesel Nozzle on Spray caractéristics, ICLASS, vol.41, 2003.

M. Gorokhovski, THE STOCHASTIC LAGRANGIAN MODEL OF DROP BREAKUP IN THE COMPUTATION OF LIQUID SPRAYS, Atomization and Sprays, vol.11, issue.5, pp.505-519, 2001.
DOI : 10.1615/AtomizSpr.v11.i5.20

N. Grizzuti and O. Bifulco, Effects of coalescence and breakup on the steady-state morphology of an immiscible polymer blend in shear flow, Rheologica Acta, vol.27, issue.49, pp.406-415, 1997.
DOI : 10.1007/BF00396327

Ö. L. Gülder and G. J. Smallwood, Temporal Structure of Dense Diesel Sprays, th International conference on internal combustion engines experiments and modelling, pp.497-504, 1999.

N. Guerrassi and J. Champoussin, Mesure de la taille et de la vitesse des gouttes dans un jet, Entropie, vol.3146, pp.35-42, 1995.

R. Harari and E. Sher, BIMODAL DROP SIZE DISTRIBUTION BEHAVIOR IN PLAIN-JET AIRBLAST ATOMIZER SPRAYS, Atomization and Sprays, vol.8, issue.3, pp.349-362, 1998.
DOI : 10.1615/AtomizSpr.v8.i3.60

Y. Hardalupas, A. Taylor, and J. H. Whitelaw, Characteristics of the spray from a diesel injector, International Journal of Multiphase Flow, vol.18, issue.2, pp.159-179, 1992.
DOI : 10.1016/0301-9322(92)90080-Z

L. He and F. Ruiz, Effect of cavitation on flow and turbulence in plain orifices for high-speed atomisation, Atomization and Sprays, vol.549, pp.569-584, 1995.

C. Heimgärtner and A. Leipertz, Investigation of the Primary Spray Breakup Close to the Nozzle of a Common - Rail High Pressure Diesel Injection System, SAE Technical Paper Series, 2000.
DOI : 10.4271/2000-01-1799

J. O. Hinze, Fundamentals of the hydrodynamic mechanism of splitting in dispersion process, A.I.Ch.E Journal, pp.289-295, 1955.

H. Hiroyasu, N. Tamaki, and M. Shimizu, Internal Flow in a Nozzle Hole and Mechanism of the Atomization of a liquid Jet, ème International Workshop on advanced Spray Combustion, 1998.

H. Hiroyasu and M. Arai, Structures of Fuel Sprays in Diesel Engines, SAE Technical Paper Series, 1990.
DOI : 10.4271/900475

L. P. Hsiang and G. M. Faeth, Drop deformation and breakup due to shock wave and steady disturbances, International Journal of Multiphase Flow, vol.2154, pp.545-560, 1995.
DOI : 10.2514/6.1994-560

Z. Huang, L. F. Zhang, and B. Z. Li, Holographic diagnostics for Diesel spray research, ICLASS'91, pp.609-610, 1991.

K. Y. Huh and E. Lee, DIESEL SPRAY ATOMIZATION MODEL CONSIDERING NOZZLE EXIT TURBULENCE CONDITIONS, Atomization and Sprays, vol.8, issue.4, pp.453-469, 1998.
DOI : 10.1615/AtomizSpr.v8.i4.60

H. Iida, E. Matsumura, K. Tanaka, J. Senda, H. Fujimoto et al., Effect of internal flow in a simulated Diesel Injection Nozzle on spray atomization, 2000.

N. Iliasova, A. V. Ustinov, N. D. Bistrov, and L. N. Medinskaya, Evaluating the geometrical parameters of images of atomisation jet cross-section in diagnostics off diesel injectors, SPIE Proceedings Series, vol.334858, pp.308-315, 1998.

B. Ineichen, Recent Findings of Simultaneous Drolet Size, Shape and Velocity Detection of Injection Sprays in a High Pressure-igh Temperature Cell, p.9, 2003.

H. Kano, M. Kato, T. Kojima, and M. Katagiri, Contribution of Optimum Design for Nozzle Configuration to Spray Formation, SAE Technical Paper Series, pp.1764-1779, 1990.
DOI : 10.4271/900824

T. Karasawa, M. Tanaka, K. Abe, S. Shiga, and T. Kurabayashi, EFFECT OF NOZZLE CONFIGURATION ON THE ATOMIZATION OF A STEADY SPRAY, Atomization and Sprays, vol.2, issue.4, pp.411-426, 1992.
DOI : 10.1615/AtomizSpr.v2.i4.30

J. B. Keller, S. I. Rubinov, and Y. O. Tu, Spatial instability of a jet, Physics of Fluids, vol.16, issue.12, pp.2052-2055, 1973.
DOI : 10.1063/1.1694264

J. Y. Kim, Study of Internal Flow Characteristics and atomisation performance of Effervescent Atomizers, 2000.

J. Y. Kim, J. H. Chu, and S. Y. Lee, Improvement of patern Recognition algorithm for Drop size Measurement, Atomization and sprays, vol.964, pp.313-329, 1999.

K. S. Kim and S. S. Kim, DROP SIZING AND DEPTH-OF-FIELD CORRECTION IN TV IMAGING, Atomization and Sprays, vol.4, issue.1, pp.65-78, 1994.
DOI : 10.1615/AtomizSpr.v4.i1.30

I. G. Kim and S. Y. Lee, A simple technique for sizing and counting of a spray drops using digital image processing, Experimental thermal and fluid science, pp.214-221, 1990.

Y. D. Kim and S. Y. Lee, Application of the Hough transform to image processing of the heavily overlapped particles with spherical shapes, Atomization and sprays, vol.12, pp.451-461, 2002.

Y. D. Kim, S. Y. Lee, J. H. Chu-Ème, and I. , Separation of overlapped Particles Using Boundary Curvature Information, pp.259-64, 2001.

K. U. Koh, J. Y. Kim, and S. Y. Lee, DETERMINATION OF IN-FOCUS CRITERIA AND DEPTH OF FIELD IN IMAGE PROCESSING OF SPRAY PARTICLES, Atomization and Sprays, vol.11, issue.4, pp.317-333, 2001.
DOI : 10.1615/AtomizSpr.v11.i4.20

J. Labs and T. Parker, Diesel fuel spray droplet sizes and volume fractions from the region 25 mm below the orifice, Atomisation & Sprays, vol.1370, pp.45-62, 2003.

G. Lalizel, E. Rouland, and B. Patte-rouland, Caractérisation des structures cohérentes de la zone initiale du jet annulaire, ème Congrès Fluvisu, 2001.

D. Lebrun, C. E. Touil, and C. Özkul, Methods for the deconvolution of defocused-image pairs recorded separately on two CCD cameras: application to particle sizing, Applied Optics, vol.35, issue.32, pp.6375-6381, 1996.
DOI : 10.1364/AO.35.006375

A. Lecuona, P. A. Sosa, P. A. Rodriguez, and R. I. Zequeira, Volumetric characterization of dispersed two-phase flows by digital image analysis, Measurement Science and Technology, vol.11, issue.8, pp.1152-1161, 2000.
DOI : 10.1088/0957-0233/11/8/309

S. Y. Lee and Y. D. Kim, Sizing of Spray Particles using Imge Processing Technique " , 9 ème ICLASS proceeding, Lecture plénière, 2003.

S. Y. Lee, B. S. Park, and I. G. Kim, GRAY LEVEL FACTORS USED IN IMAGE PROCESSING OF TWO-DIMENSIONAL DROP IMAGES, Atomization and Sprays, vol.1, issue.4, pp.389-400, 1991.
DOI : 10.1615/AtomizSpr.v1.i4.30

A. H. Lefebvre, Atomisation and Sprays, 1989.

S. P. Lin and Z. W. Lian, Mechanisms of the breakup of liquid jets, AIAA Journal, vol.28, issue.1, pp.120-125, 1988.
DOI : 10.2514/3.10361

S. Liu and R. D. Reitz, An analysis of the distortion and breakup mechanisms of high speed liquid drops, Multiphase Flow, N°23, pp.631-650, 1997.
DOI : 10.1016/S0301-9322(96)00086-9

J. L. Lumley, P. Holmes, and G. Berkooz, Turbulence, Coherent structures, Dynamical Systems and Symmetry, Cambridge Monographs on Mechanics, vol.79, 1996.

H. Malot and J. B. Blaisot, Droplet Size Distribution and Sphericity Measurements of Low-Density Sprays Through Image Analysis, Particle & Particle Systems Characterization, vol.17, issue.4, pp.146-158, 2000.
DOI : 10.1002/1521-4117(200012)17:4<146::AID-PPSC146>3.0.CO;2-4

H. Mallot and C. Dumouchel, EXPERIMENTAL INVESTIGATION OF THE DROP SIZE DISTRIBUTION OF SPRAYS PRODUCED BY A LOWVELOCITY NEWTONIAN CYLINDRICAL LIQUID JET, Atomization and Sprays, vol.11, issue.3, pp.227-254, 2001.
DOI : 10.1615/AtomizSpr.v11.i3.20

R. Marcer, P. Le-cottier, H. Chaves, B. Argueyreolles, C. Habchi et al., A Validated Numerical Simulation of Diesel Injector Flow Using a VOF Method, SAE Technical Paper Series, 2000.
DOI : 10.4271/2000-01-2932

R. Marcer, A CFD code for diesel direct injection simulation, 2003.

. Ph, E. Marmottant, and . Villermaux, Atomisation primaire dans les jets coaxiaux, Combustion, issue.2, pp.89-125, 2003.

M. Megahed and P. Roosen, <title>First results of the delayed fluorescence velocimetry as applied to diesel spray diagnostics</title>, Fifth International Conference on Laser Anemometry: Advances and Applications, pp.89-125, 2003.
DOI : 10.1117/12.150492

R. Miranda, H. Chaves, and F. Obermeier, Imaging of cavitation, Hollow jets ans jet Branching at low lift in a real size VCO Nozzle, ILASS'02, 2002.

I. F. Murray and S. D. Heister, On a droplet's response to acoustic excitation, International Journal of Multiphase Flow, vol.25, issue.3, pp.531-550, 1990.
DOI : 10.1016/S0301-9322(98)00051-2

K. Nishida, S. Ceccio, D. Assanis, N. Tamaki, and H. Hiroyasu, Characterization of Cavitation Flow in a Simple Hole Nozzle, International Journal of Fluid Mechanics Research, vol.24, issue.1-3, pp.1-3, 1997.
DOI : 10.1615/InterJFluidMechRes.v24.i1-3.370

A. Nishimura and D. N. Assanis, A model for Primary Diesel Fuel Atomization Based on Cavitation Bubble Collapse Energy Orifice Cavitation and its Effect on Spray Mixing, Journal of Fluids Engineering, pp.681-687, 1976.

N. Otsu, A Threshold Selection Method from Gry Level Histogram, IEEE Transactions on Systems, Man and Cybernetics, vol.991, issue.1, pp.62-66, 1979.

L. Rayleigh, On The Instability Of Jets, Proc. Lond, pp.4-13
DOI : 10.1112/plms/s1-10.1.4

P. Rantanen, A. Valkonen, and A. Cronhjort, Measurements of a diesel spray with a normal size nozzle and a large-scale model, International Journal of Heat and Fluid Flow, vol.20, issue.5, pp.545-551, 1999.
DOI : 10.1016/S0142-727X(99)00046-6

L. Reichelt and U. Renz, Experimental and numerical investigation of the aerodynamic break-up of liquid droplets at diesel engine conditions, 2003.

K. F. Ren, D. Lebrun, C. Özkul, A. Kleitz, G. Gouesbet et al., On the measurements of particles by imaging methods: Theoretical and Experimental Aspects, Particle & Particle Systems Characterization, vol.2088, issue.2, pp.156-164, 1996.
DOI : 10.1002/ppsc.19960130215

I. V. Roisman and C. Tropea, Far-field penetration of mushroom-like sprays, 2003.

F. Ruiz, A Few Useful relations dor cavitating orifices, ICLASS-91, 1991.

F. Ruiz, TURBULENCE UNDER QUASI-CAVITATING CONDITIONS: A NEW SPECIES?, Atomization and Sprays, vol.9, issue.4, pp.419-429, 1999.
DOI : 10.1615/AtomizSpr.v9.i4.70

D. P. Sczomak, The Poppet Covered Orifice Fuel Injection Nozzle, SAE Technical Paper Series, pp.1736-1746, 1990.
DOI : 10.4271/900821

N. Selmaouie, E. Piegay, and C. Leschi, Pretopologie et Granulomètrie, Conférence internationale sur le contrôle Qualité par Vision Artificielle, pp.317-324, 1995.

J. Seneschal, C. Ducottet, J. P. Schon, J. C. Champoussin, and P. Gusheri, Automatic system for visualization and characterization of high pressure diesel sprays, Conférence internationale sur le contrôle Qualité par Vision Artificielle, pp.317-324, 1995.

D. P. Schmidt, C. J. Rutland, and M. L. Corrandini, Cavitation in Two-Dimensional Asymmetric Nozzles, SAE Technical Paper Series, 1999.
DOI : 10.4271/1999-01-0518

D. Sindayihebura, J. Cousin, and C. Dumouchel, Experimental and theoretical study of sprays produced by ultrasonic atomisers, Part. Part. Syst. Charact., N°, vol.14, pp.93-101, 1997.

G. J. Smallwood, Ö. L. Gülder, and D. R. Snelling, Tomographic Visualization of the dense core Region in Trensient Diesel Sprays, ICLASS'94, pp.270-277, 1994.

G. J. Smallwood and Ö. L. Gülder, Views on the structure of Transient Diesel sprays, Atomization and Sprays, vol.10, pp.355-386, 2000.

C. Soteriou, R. Andrews, and M. Smith, Direct Injection Diesel Sprays and the Effect of Cavitation and Hydrolic Flip on Atomization, 1995.

C. Soteriou, R. Andrews, M. Smith, and S. A. , Further Studies of Cavitation and Atomization in Diesel Injection, SAE Technical Paper Series, pp.1999-2000, 1999.
DOI : 10.4271/1999-01-1486

C. Soteriou and R. Andrews, Diesel injection ? laser light sheet illumination of the development of cavitation in orifices, ImechE N°C529, vol.98, 1998.

C. Soteriou, R. Andrews, N. Torres, M. Smith, and R. Kunkulagunta, Through the Diesel Nozzle Hole ? A journey of Discovery II, 2001.

J. Stegemann, J. Seebode, J. Baltes, C. Baumgarten, and G. P. Merker, Influence of the Throttle effects at the Needle Seat on the Spray Characteristics of a multihole injection nozzle, congrès ILASS-Europe, 2002.

H. Takahashi, H. Yanagisawa, S. Shiga, T. Karasawa, and H. Nakamura, Analysis of High- Pressure Diesel Spray Formation in the early stage of Injection Promotion of the atomisation of a liquid jet by cavitation in nozzle hole, ILASS'98, pp.33-42, 1997.

N. Tamaki, M. Shimizu, and H. Hiroyasu, Enhanced Atomization of a liquid jet by cavitation in a nozzle hole, 2000.

N. Tamaki and M. Shimizu, EFFECTS OF CAVITATION AND INTERNAL FLOW ON ATOMIZATION OF A LIQUID JET, Atomization and Sprays, vol.8, issue.2, pp.179-197, 1998.
DOI : 10.1615/AtomizSpr.v8.i2.30

K. Triballier, J. Cousin, and C. Dumouchel, Behavior of the Spraytec in the presence of Multiple Light scattering and bimodal Drop Size distribution, p.9, 2003.

J. Yon and J. Blaisot, Granulométrie et Morphologie des Sprays par Imagerie, 2001.

J. Yon and J. Blaisot, Images of air bubbles included in a cylindrical liquid jet : First steps for improving the characterization of the cavitation phenomenon, ILASS, 2001.

J. Yon, J. Blaisot, and M. Ledoux, External and internal behaviour of the near Field Diesel Jet at High injection pressure : Dual source vizualization and multiple angles tomographic experiments, ILASS, 2002.

J. Yon, J. Blaisot, and M. Ledoux, UNUSUAL LASER-SHEET TOMOGRAPHY COUPLED WITH BACKLIGHT IMAGING CONFIGURATIONS TO STUDY THE DIESEL JET STRUCTURE AT THE NOZZLE OUTLET FOR HIGH INJECTION PRESSURES, Journal of Flow Visualization and Image Processing, vol.9, issue.1, pp.53-73, 2002.
DOI : 10.1615/JFlowVisImageProc.v9.i1.40

J. Yon, G. Lalizel, and J. Blaisot, A STATISTICAL MORPHOLOGICAL DETERMINATION OF THE GROWTH RATE OF THE INTERFACIAL DISTURBANCE OF AN EXCITED RAYLEIGH JET;, Journal of Flow Visualization and Image Processing, vol.11, issue.3, p.4, 2003.
DOI : 10.1615/JFlowVisImageProc.v11.i3.60

J. Yon and J. Blaisot, Morphological analysis of the Diesel jet at the nozzle outlet, ICLASS, 2003.