[. Abdul-latif and A. , Approches multi-échelles pour la description de l'anélasticité cyclique avec endommagement, Thèse de Doctorat, UTC, 1994.

[. Abdul-latif, A. Saanouni, and K. , Micromechanical modeling of low cycle fatigue under complex loadings ??? Part II. Applications, International Journal of Plasticity, vol.12, issue.9, pp.1123-1149, 1996.
DOI : 10.1016/S0749-6419(96)00044-7

F. Auricchio, R. L. Taylor, I. Babuska, and W. C. Rheinboldt, A generalized elastoplastic plate theory and its algorithmic implementation, International Journal for Numerical Methods in Engineering, vol.114, issue.15, pp.2583-2608, 1978.
DOI : 10.1002/nme.1620371506

K. J. Bathe, Finite Element Procedures in Engineering Analysis, Journal of Pressure Vessel Technology, vol.106, issue.4, 1982.
DOI : 10.1115/1.3264375

Z. P. Bazant, T. Belytschko, and T. P. Chang, Continuum Theory for Strain???Softening, Journal of Engineering Mechanics, vol.110, issue.12, pp.1666-1692, 1984.
DOI : 10.1061/(ASCE)0733-9399(1984)110:12(1666)

M. Bellet, J. L. Chenot, L. Fourment, E. Massoni, and P. Montmitonnet, Eléments finis et mise en forme des métaux, ENSMP/CEMEF, 1994.

T. Belytschko, W. K. Liu, B. Moran, and A. Benallal, Nonlinear finite elements for continua and structures, Thermoviscoplasticité et endommagement des structures Thèse de Doctorat d'Etat, 1989.

F. Benhatira and A. Benzerga, Modélisation de l'élastoplasticité endommageable en transformations finies Rupture ductile des tôles anisotropes, simulation de la propagation longitudinale dans une tôle pressurisés, Thèse de Doctorat Thèse de Doctorat, 1992.

M. Berveiller and A. Zaoui, An extension of the self-consistent scheme to plastically-flowing polycrystals, Journal of the Mechanics and Physics of Solids, vol.26, issue.5-6, p.325, 1979.
DOI : 10.1016/0022-5096(78)90003-0

[. Laug, P. Borouchaki, and H. , Mailleur adaptatif bidimensionnel de domaine à frontière variable, 2001.

J. Bohan and A. Chevalier, Guide du technicien en productique, Edition HACHETTE Technique, 1995.

R. [. Bonnet and . Wood, Nonlinear continuum mechanics for finite element analysis, 1997.
DOI : 10.1017/CBO9780511755446

H. Borouchaki and P. L. Georges, Triangulation de Delaunay et maillage, 1997.

H. Borouchaki and P. J. Frey, Maillage g??om??trique de surfaces, Revue européenne des éléments finis, pp.47-75, 1999.
DOI : 10.1080/12506559.1999.10511352

H. Borouchaki and P. L. Georges, Quality mesh generation, Comptes Rendus de l'Acad??mie des Sciences - Series IIB - Mechanics, vol.328, issue.6
DOI : 10.1016/S1620-7742(00)00031-3

H. Borouchaki, P. Laug, A. Cherouat, and K. Saanouni, Adaptative remeshing for ductile fracture prediction in metal forming, C.R. Acad. Sci, vol.330, issue.10, pp.709-716, 2002.

H. Borouchaki02a-]-borouchaki, P. Laug, A. Cherouat, and K. Saanouni, Remaillage en grandes déformations. Applications à la mise en forme de structures 2D, Revue européenne des éléments finis, pp.57-79, 2002.

D. Borst, R. Benallal, A. Heeres, O. Braudel, and J. H. , A gradient-enhanced damage approach to fractureModélisation numérique des grandes déformations élastoplastiques d'un solide isotrope par la méthode des éléments finis. Application à l'extrusion à froid des métaux, J. de Physique IV, vol.6, pp.491-502, 1986.

M. G. Brunet, Matérials processing defectsUne approche micromécanique phénoménologique du comportement inélastique des métaux, pp.235-249, 1987.

E. Ceretti, P. Fallboehmer, W. T. Wu, and T. Altan, Simulation of high speed milling: application of 2D FEM to chip formation in orthogonal cutting, ERC NSM, 1995.

J. L. Chaboche, J. L. Chaboche, and J. L. Chaboche, Sur l'utilisation des variables d'état interne pour la description de la viscoplasticité cyclique avec endommagementDescription thermodynamique et phénoménologique de la viscoplasticité cyclique avec endommagementLe concept de la contrainte effective appliquée à l'élasticité et à la viscoplasticité en présence d'endommagement anisotrope, Problèmes non linéaires de mécanique, Symp Franco-Polonais de Rhéologie et Mécanique Thèse de Doctorat Es-Science, pp.137-159, 1977.

J. L. Chaboche, Development of Continuum Damage Mechanics for Elastic Solids Sustaining Anisotropic and Unilateral Damage, International Journal of Damage Mechanics, vol.2, issue.4, pp.311-329, 1993.
DOI : 10.1177/105678959300200401

J. L. Chaboche, G. Cailletaud, J. Besson, G. Cailletaud, J. L. Chaboche et al., Integration methods for complex plastic constitutive equations, Mécanique non linéaire des matériaux : Comportement, Endommagement et méthodes numériques, pp.125-155, 1996.
DOI : 10.1016/0045-7825(95)00957-4

J. L. Chaboche, W. H. Chen, P. Tsai, A. Cherouat, K. Saanouni et al., Thermodynamically founded CDM models for Creep and others conditions". CISM Courses and Lecture N° 399Finite element analysis of élastoplastic sliding contact problem with friction Remaillage en grandes déformations, applications à la mise en forme, Int. Centre for Mechanical Sciences Comp. Struc, vol.22, issue.11, pp.209-283, 1986.
DOI : 10.1007/978-3-7091-2506-9_5

C. L. Chow and T. Ju, A comparative study of continuum damage models for crack propagation under gross yielding, Int. J. Frac, vol.35, pp.43-75, 1992.

C. Comi, U. Perego, J. P. Cordebois, F. G. Sidoroff, and G. Touzot, A generalized variable formulation for gradient dependent softening plasticityEndommagement anisotrope en élasticité et plasticitéUne présentation de la méthode des éléments finis, Int. J. Num. Meth. Engng. J. Méc. Théo. App., Numéro spécial, vol.39, pp.731-3755, 1982.

[. Dogui, A. Elhraiec, A. Firas, A. Fourment, L. Bouchard et al., Simulation numérique de la coupe orthogonale : Application à l'alliage d'aluminium AS7U3G.T5Modélisation et simulation thermomécaniques de la coupe des métauxNumerical simulation of chip formation and crack propagation during non-steady cutting processes, Plasticité anisotrope en grandes déformations Thèse de Doctorat, pp.59-76, 1989.

. Fred92a, A. D. Freed, and K. P. Walker, Exponential Integration Algorithm for First- Order ODES with Application to Viscoplasticity, ASME Summer Conf. On Mechanics and Materials Recent Advances on Damage Mechanics and Plasticity, 1992.

A. D. Freed and K. P. Walker, Exponential Integration Algorithms Applied to Viscoplasticity, Modèles numériques et expérimentaux en grandes déformations plastiques et endommagement de rupture ductile Thèse de Doctorat d'Etat, pp.1757-1768, 1985.

J. C. Gelin, J. Oudin, and Y. Ravalard, An Improved Finite Element Method for the Analysis of Damage and Ductile Fracture in Cold Forming Processes, CIRP Annals - Manufacturing Technology, vol.34, issue.1, pp.209-213, 1985.
DOI : 10.1016/S0007-8506(07)61758-2

P. Germain, Cours de mécaniques des milieux continus, 1973.

P. Germain, Q. S. Nguyen, and S. Suquet, Continuum Thermodynamics, Journal of Applied Mechanics, vol.50, issue.4b, pp.1010-1020, 1983.
DOI : 10.1115/1.3167184
URL : https://hal.archives-ouvertes.fr/hal-00105630

G. Pierre, T. Mécanique, B. Chaleur, and A. L. Gurson, Modélisation de la coupe des métauxContinuum theory of ductile rupture by void nucleation and growth: Part I -Yiel criteria and flow rules for porous ductile media, J. Eng. Mat. Tech, vol.99, 1997.

H. Habraken, A. M. Habraken, and A. M. , Contribution à la modélisation du formage des métaux par la méthode des éléments finis, Thèse de Doctorat, 1989.

J. O. Hallquist, G. L. Goudreau, and D. J. Benson, Sliding interfaces with contact-impact in large-scale Lagrangian computations, Computer Methods in Applied Mechanics and Engineering, vol.51, issue.1-3, pp.107-137, 1985.
DOI : 10.1016/0045-7825(85)90030-1

Y. Hammi, S. Hartmann, and P. Haupt, Simulation numérique de l'endommagement dans les procédés de mise en formeStress Computation and Consistent Tangent Operator Using Non Linear Kinematic Hardening Models, Thèse de Doctorat, pp.3801-3814, 1993.

S. Hartmann, G. Lührs, and P. Haupt, AN EFFICIENT STRESS ALGORITHM WITH APPLICATIONS IN VISCOPLASTICITY AND PLASTICITY, International Journal for Numerical Methods in Engineering, vol.11, issue.6, pp.991-1013, 1972.
DOI : 10.1002/(SICI)1097-0207(19970330)40:6<991::AID-NME98>3.0.CO;2-H

J. Hueting, T. J. Hughes, R. L. Taylor, J. L. Sackman, A. C. Curnier et al., On simulation of thermo-mechanical forming processesA finite element for a class of contact impact problem, 1987.

T. J. Hughes and R. L. Taylor, Unconditionally Stable Algorithms for quasistatic Elasto-viscoplasticitic Finie Element Analysis, Computers and structures, vol.8173, issue.4, p.169, 1978.

T. J. Hughes, The finite element method, 1987.

T. J. Hughes, Analysis if Transcient algorithms with particular reference to stability behavior, Computational Methods for transcient analysis

T. Belytschko, T. J. Hugues, E. Kachanov, and L. M. , Time of the rupture process under creep conditions, Z.v, issue.8, pp.67-153, 1983.

H. Kardestuncer and D. H. Norrie, Finite Elements Handbook, 1987.

J. D. Kim, V. R. Marinov, D. S. Kim, K. Ellis-horwoodkomvopoulos91-]-komvopoulos, and S. A. Erpenbeck, Built-up edge analysis of orthogonal cutting by the visco-plastic finite element methodIncremental Finite Elements Modelling in Non-linear Solid Mechanics Finite element modeling of orthogonal metal cuttingDamage effective stress in quasi-unilateral conditions, Journal of Materials Processing Technology IUTAM Conference, pp.367-372, 1984.

P. Ladevèze, M??canique non lin??aire des structures, Revue Fran??aise de G??nie Civil, vol.1, issue.2, 1996.
DOI : 10.1080/12795119.1997.9692126

L. Calvez, C. Lee, E. H. Lemaitre, J. Chaboche, and J. L. , Etude des aspects thermiques et métallurgiques de la coupe orthogonale d'un acier au carboneElastique plastic deformation at finite strain, Thèse de Doctorat, ENSAM, ParisMécanique des matériaux solides, pp.1-6, 1969.

J. Lemaitre, Local approach of fracture, Engineering Fracture Mechanics, vol.25, issue.5-6, p.523, 1986.
DOI : 10.1016/0013-7944(86)90021-4

C. Lemarchand, P. Lestriez, A. Cherouat, J. Mariage, and K. Saanouni, De la dynamique des dislocations à la mécaniques des milieux continus : Développement d'une simulation micro-macroSimulation numérique du couplage thermomécanique-endommagement : Application à la mise en forme A coupled finite element model of thermo-elastic-plastic large deformation for orthogonal cutting, Thèse de Doctorat, pp.218-226, 1992.

M. Maillard, A. Marcal, and P. V. , Etude expérimentale et théorie du découpageA stiffness method for elastic-plastic problems, Thèse de Doctorat, 1991.

. Mec, A. G. Sci-mamalis, M. Horvath, A. S. Branis, D. E. Manolakos et al., Finite element simulation of chip formation in orthogonal metal cuttingSheet metal cutting simulation by continuum damage mechanics, th Int. ESAFORM Conference on Material Forming, pp.229-238, 1965.

J. Mariage02b-]-mariage, K. Saanouni, P. Lestriez, J. Mariage, A. Cherouat et al., Numerical simulation of extrusion with central bursting prediction by continuum damage mechanics Proceeding of the 5 th IntSimulation numérique d'un procédé de perçage/ébavurage d'une roue en plasticité avec endommagement, ESAFORM Conference on Material Forming Matériaux, pp.475-478, 2002.

J. Mariage02d-]-mariage, K. Saanouni, P. Lestriez, J. Mariage, K. Saanouni et al., Simulation numérique du forgeage d'un écrou six pans avec prise en compte du couplage comportementendommagement dans Forge2 ® et Forge3Numerical simulation of damage in metal forming processesSimulation numérique de l'endommagement ductile en formage de piècesModelling and simulation of high-speed machiningA criterion for ductile fracture by the growth of holes, Les quatrièmes journées scientifiques et techniques en mécanique et matériaux JSTMM'02 Thèse de Doctorat, pp.95-102, 1968.

E. D. Mielnieck, Metal working science and engineering, Mc grawhill , inc, 1991.

S. Murakami, N. Ohno, A. Molinari, S. Ahzi, R. Kouddane et al., A continuum theory of creep and creep damageOn the self consistent modeling of elastic-plastic behavior of polycristalsOn the implementation of inelastic constitutive equations with special référence to large deformation problems, Creep in Structures, 3rd IUTAM Symp, pp.43-62, 1980.

J. T. Oden, Finite elements of nonlinear continua, 1972.

J. T. Oden and E. Pires, Nonlocal and Nonlinear Friction Laws and Variational Principles for Contact Problems in Elasticity, Journal of Applied Mechanics, vol.50, issue.1, pp.67-73, 1983.
DOI : 10.1115/1.3167019

M. Ortiz and E. P. Popov, Accuracy and stability of integration algorithms for elastoplastic constitutive relations, International Journal for Numerical Methods in Engineering, vol.2, issue.9, pp.1561-1576, 1985.
DOI : 10.1002/nme.1620210902

M. Ortiz and J. C. Simo, An analysis of a new class of integration algorithms for elastoplastic constitutive relations, International Journal for Numerical Methods in Engineering, vol.51, issue.3, pp.353-366, 1986.
DOI : 10.1002/nme.1620230303

D. R. Owen and H. , Finite elements in plasticity, Theory and practiceNonlocal damage theory, Z. P. J, 1980.

R. Rabotnov and Y. N. , Creep Problems in Structural Members, Journal of Applied Mechanics, vol.37, issue.1, 1969.
DOI : 10.1115/1.3408479

[. Rakotomalala and T. Joyot, Communication in numerical methods in engineering On the enlargement of voids in triaxial stress field, J, vol.9, pp.975-987, 1993.

G. Rousselier and K. Saanouni, Three dimensionnal constitutive relations and ductile fracture" IUTAM Symp On three dimensionnal constitutive relations and fraction Sur l'analyse de la fissuration des milieux élastoviscoplastiques par la théorie de l'endommagement continu, Thèse d'Etat és-Sciences, pp.197-226, 1981.

K. Saanouni, J. Chaboche, and P. M. Lesne, On the creep crackgrowth prediction by a non local damage formulation, Euro. J. Mech., A/Solids, vol.8, issue.6, pp.437-459, 1989.

K. Saanouni, C. Forster, and F. Benhatira, On the Anelastic Flow with Damage, International Journal of Damage Mechanics, vol.32, issue.7, pp.140-169, 1994.
DOI : 10.1177/105678959400300203

K. Saanouni, K. Nesnas, Y. Hammi, . Saanouni00b, K. Saanouni et al., Damage Modeling in Metal Forming Processes, Continuous Damage and Fracture, pp.196-240, 2000.
DOI : 10.1177/105678950000900302

K. Saanouni, A. Cherouat, and Y. Hammi, Numerical aspects of finite elastoplasticity with isotropic ductile damage for metal forming, Revue Européenne des Eléments Finis, vol.2, pp.3-4, 2001.

. Shen and K. Saanouni, Application to Metal Forming Mang), in 'Comprehencive Structural IntegrityGradient-dependent nonlocal constitutive formulation for thermo-elastoplasticity coupled with isotropic damage, 2002.

. Shen02b, X. P. Shen, and K. Saanouni, Gradient-dependent nonlocal constitutive formulation for thermo-elasto-plasticity coupled with isotropic damage, pp.143-146, 2002.

J. C. Simo and M. Ortiz, A unified approach to finite deformation elastoplastic analysis based on the use of hyperelastic constitutive equations, Computer Methods in Applied Mechanics and Engineering, vol.49, issue.2, pp.221-245, 1984.
DOI : 10.1016/0045-7825(85)90061-1

J. C. Simo and R. Taylor, Consistent tangent operators for rate-independent elastoplasticity, Computer Methods in Applied Mechanics and Engineering, vol.48, issue.1, pp.101-118, 1985.
DOI : 10.1016/0045-7825(85)90070-2

J. C. Simo and R. L. Taylor, A return mapping algorithm for plane stress elastoplasticity, International Journal for Numerical Methods in Engineering, vol.33, issue.18, pp.649-670, 1986.
DOI : 10.1002/nme.1620220310

J. C. Simo and J. W. Ju, Strain- and stress-based continuum damage models???I. Formulation, International Journal of Solids and Structures, vol.23, issue.7, pp.821-864, 1987.
DOI : 10.1016/0020-7683(87)90083-7

J. C. Simo and R. L. Taylor, Computational inelasticity, 1998.

P. Suquet, Approche par homogénéisation d'une forme endommageable, CRAS serie II, vol.292

R. L. Taylor and P. Papadopoulos, A finite element method for dynamic contact problems " , finite element in 90's, 1991.

G. Touzot, J. Dabounou, C. Truesdell, W. Noll, G. W. Springer et al., Int??gration num??rique de lois de comportement ??lastoplastique, Advances in Inelastic Analysis, AMD, pp.465-492, 1964.
DOI : 10.1080/12506559.1993.10511093

A. Zaoui, Comportement global des polycristaux, Passage du polycristal au monocristal " , Phy. Et mécanique de la mise en forme des métaux Contribution to the local approach of fracture in solid dynamics, Presse du CNRS-IRSID Thèse de Doctorat, p.337, 1990.

O. Zienkiewicz, Y. Lui, and G. Huang, Error estimation and adaptivity in flow formulation for forming problems, International Journal for Numerical Methods in Engineering, vol.1, issue.1, pp.203-235
DOI : 10.1002/nme.1620250105

O. Zienkiewicz and T. R. , The finite element method, 1994.