J. C. Abry, In situ detection of damage in CFRP laminates by electrical resistance measurements, Composites Science and Technology, vol.59, issue.6, pp.925-935, 1999.
DOI : 10.1016/S0266-3538(98)00132-8

J. C. Abry, In-situ monitoring of damage in CFRP laminates by means of AC and DC measurements, Composites Science and Technology, vol.61, issue.6, pp.61-855, 2001.
DOI : 10.1016/S0266-3538(00)00181-0

O. Allix, A composite damage meso-model for impact problems, Composites Science and Technology, vol.61, issue.15, pp.61-2193, 2001.
DOI : 10.1016/S0266-3538(01)00113-0

O. Allix, D. Levêque, and L. Perret, Identification and forecast of delamination in composite laminates by an interlaminar interface model, Composites Science and Technology, vol.58, issue.5, pp.671-678, 1998.
DOI : 10.1016/S0266-3538(97)00144-9

S. Andrieux, Y. Bamberger, and J. J. Marigo, Un modèle de matériau microfissuré pour les bétons et les roches, Journal de Mécanique théorique et appliquée, vol.5, issue.3, pp.471-513, 1986.

D. Balageas, Comparison between Non-Destructive Evaluation Techniques and Integrated Fiber Optic Health Monitoring Systems for Composite Sandwich Structures, Journal of Intelligent Material Systems and Structures, vol.11, issue.6, pp.426-437, 2000.
DOI : 10.1106/MFM1-C5FT-6BM4-AFUD

S. Beard and F. Chang, Active Damage Detection in Filament Wound Composite Tubes Using Built-In Sensors and Actuators, Journal of Intelligent Material Systems and Structures, vol.8, issue.10, pp.891-897, 1997.
DOI : 10.1177/1045389X9700801009

F. Beaumont, Prédiction du mouvement 2D d' une plaque épaisse fissurée et caractérisation de la fissure par inversion de la réponse à une sollicitation périodique, Thèse de l, 2000.

S. Benmedakhene, M. Kenane, and M. L. Benzeggagh, Initiation and growth of delamination in glass/epoxy composites subjected to static and dynamic loading by acoustic emission monitoring, Composites Science and Technology, vol.59, issue.2, pp.201-208, 1999.
DOI : 10.1016/S0266-3538(98)00063-3

S. Benmedakhene, M. Kenane, and M. L. Benzeggagh, Initiation and growth of delamination in glass/epoxy composites subjected to static and dynamic loading by acoustic emission monitoring, Composites Science and Technology, vol.59, issue.2, pp.201-208, 1999.
DOI : 10.1016/S0266-3538(98)00063-3

C. Bois and C. Hochard, Monitoring of Laminated Composites Delamination Based on Electro-Mechanical Impedance Measurement, Journal of Intelligent Material Systems and Structures, vol.15, issue.1, pp.59-67, 2004.
DOI : 10.1177/1045389X04039405

URL : https://hal.archives-ouvertes.fr/hal-00088231

C. Bordreuil and C. Hochard, Finite element computation of woven ply laminated structure up to failure, Applied Composite Material, 2004.

R. Burgueno, Experimental dynamic characterization of an FRP composite bridge superstructure assembly, Composite Structures, vol.54, issue.4, pp.427-444, 2001.
DOI : 10.1016/S0263-8223(01)00115-5

P. Cawley and D. Alleyne, The use of Lamb waves for the long range inspection of large structures, Ultrasonics, vol.34, issue.2-5, pp.287-290, 1996.
DOI : 10.1016/0041-624X(96)00024-8

K. Chang, S. L. Liu, and F. Chang, Damage tolerance of laminated composites containing an open hole and subjected to tensile loadings, Journal of Composite Materials, vol.25, pp.274-301, 1991.

M. Cho and J. S. Kim, Higher-Order Zig-Zag Theory for Laminated Composites With Multiple Delaminations, Journal of Applied Mechanics, vol.68, issue.6, pp.869-877, 2001.
DOI : 10.1115/1.1406959

D. D. Chung, Structural health monitoring by electrical resistance measurement, Smart Materials and Structures, pp.624-636, 2001.

J. Cinquin and V. Dewynter-marty, Utilisation des composites en aérospatiale Embedded Fiber Bragg Grating sensors for industrial composite cure monitoring, Treizièmes Journées Nationales sur les Composites Journal of Intelligent Material Systems and Structures, vol.19, issue.910, pp.785-787, 1998.

E. Dieulesaint, D. Royer, S. W. , C. R. Farrar, and M. B. , Ondes élastiques dans les solides -Tome 1 : Propagation libre et guidée Prime, A summary review of vibration-based damage identification methods. The Shock and Vibration Digest, pp.30-91, 1996.

A. Gachagan, Generation and reception of ultrasonic guided waves in composite plates using conformable piezoelectric transmitters and optical-fiber detectors, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control, vol.46, issue.1, pp.72-81, 1999.
DOI : 10.1109/58.741426

R. M. Gadelrab, THE EFFECT OF DELAMINATION ON THE NATURAL FREQUENCIES OF A LAMINATED COMPOSITE BEAM, Journal of Sound and Vibration, vol.197, issue.3, pp.283-292, 1996.
DOI : 10.1006/jsvi.1996.0532

R. Gafsi and M. A. Sherif, Analysis of induced-birefringence effects on fiber Bragg gratings. Optical Fiber Technology, pp.299-323, 2000.

Y. Gélébart, Mesures et modélisation des endommagements dans les composites stratifiés, 2003.

V. Giurgiutiu and A. N. Zagrai, Characterisation of piezoelectric wafer active sensors, Journal of Intelligent Material Systems and Structures, issue.1112, pp.959-976, 2001.

V. Giurgiutiu and A. N. Zagrai, Embedded Self-Sensing Piezoelectric Active Sensors for On-Line Structural Identification, Journal of Vibration and Acoustics, vol.124, issue.1, pp.116-125, 2002.
DOI : 10.1115/1.1421056

S. V. Gopinathan, V. V. Varadan, and V. K. Varadan, A review and critique of theories for piezoelectric laminates, Smart Materials and Structures, vol.9, issue.1, pp.24-48, 2000.
DOI : 10.1088/0964-1726/9/1/304

L. Gornet, Simulation des endommagements et de la rupture dans les composites stratifiés, Thèse de l'Université Paris 6, 1996.

M. R. Govindaraju, Nondestructive evaluation of creep damage in power-plant steam generators and piping by magnetic measurements, NDT & E International, vol.30, issue.1, pp.11-17, 1997.
DOI : 10.1016/S0963-8695(96)00042-4

S. Grondel, Design of optimal configuration for generating A0 Lamb mode in a composite plate using piezoceramic transducers, The Journal of the Acoustical Society of America, vol.112, issue.1, pp.84-90, 2002.
DOI : 10.1121/1.1481062

URL : https://hal.archives-ouvertes.fr/hal-00149900

S. Grondel, Fatigue crack monitoring of riveted aluminium strap joints by Lamb wave analysis and acoustic emission measurement techniques, NDT & E International, vol.35, issue.3, pp.137-146, 2002.
DOI : 10.1016/S0963-8695(01)00027-5

S. Grondel, The propagation of Lamb waves in multilayered plates : phase-velocity measurement. Measurement science & technology, pp.348-353, 1999.

D. Guedra-degeorges, Emerging health monitoring technologies: A route towards a flexible maintenance of aerospace structures Ecole Normale Supérieure de Cachan, France. [35] Halm, D. and A. Dragon, An anisotropic model of damage and frictional sliding for brittle materials, Proceedings of Conference on Structural Health Monitoring, pp.17-439, 1998.

A. H. Harker, T. Hayashi, and K. Kawashima, Elastic waves in solids Multiple reflections of Lamb waves at a delamination, British. gas, pp.193-197, 1987.

F. Hild, A. Burr, and F. A. Leckie, Matrix cracking and debounding of ceramic-matrix composites, International Journal of Solids and Structures, issue.8, pp.33-1209, 1996.

F. Hild, A. Burr, and P. Feillard, On the mechanical behaviour of fiberreinforced composites, Composite Structures, vol.39, pp.3-4, 1997.

R. Hill, R. Brooks, and D. Kaloedes, Characterization of transverse failure in composites using acoustic emission, Ultrasonics, vol.36, issue.1-5, pp.517-523, 1998.
DOI : 10.1016/S0041-624X(97)00037-1

C. Hochard, Optimum design of laminated composite structures. Composite Structures, pp.159-165, 2004.
URL : https://hal.archives-ouvertes.fr/hal-00088234

C. Hochard, P. A. Aubourg, and J. P. Charles, Modelling of the mechanical behaviour of woven-fabric CFRP laminates up to rupture, Composites Science and Technology, issue.2, pp.61-221, 2001.
URL : https://hal.archives-ouvertes.fr/hal-00221484

N. Hu, Vibration analysis of delaminated composite beams and plates using a higher-order finite element, International Journal of Mechanical Sciences, vol.44, issue.7, pp.44-1479, 2002.
DOI : 10.1016/S0020-7403(02)00026-7

D. Huang and B. H. Sun, Approximate solution on smart composite beams by using MATLAB, Composite Structures, vol.54, issue.2-3, pp.197-205, 2001.
DOI : 10.1016/S0263-8223(01)00088-5

G. Hug, Analyse de l' endommagement dans les stratifiés carbone/epoxy soumis à un chargement de traction à vitesse élevée, Treizièmes Journées Nationales sur les Composites, 2003.

P. E. Irving and C. Thiagarajan, Fatigue damage characterization in carbon fibre composite materials using an electrical potential technique, Smart Materials and Structures, vol.7, issue.4, pp.456-466, 1998.
DOI : 10.1088/0964-1726/7/4/004

H. Jeong and Y. S. Jang, Wavelet analysis of plate wave propagation in composite laminates, Composite Structures, vol.49, issue.4, pp.443-450, 2000.
DOI : 10.1016/S0263-8223(00)00079-9

C. H. Keilers and F. Chang, Identifying Delamination in Composite Beams Using Built-In Piezoelectrics: Part I--Experiments and Analysis, Journal of Intelligent Material Systems and Structures, vol.6, issue.5, pp.649-663, 1995.
DOI : 10.1177/1045389X9500600506

C. H. Keilers and F. Chang, Identifying Delamination in Composite Beams Using Built-In Piezoelectrics: Part II --An Identification Method, Journal of Intelligent Material Systems and Structures, vol.6, issue.5, pp.664-672, 1995.
DOI : 10.1177/1045389X9500600507

S. S. Kessler, Damage detection in composite materials using frequency response methods, Composites Part B: Engineering, vol.33, issue.1, pp.87-95, 2002.
DOI : 10.1016/S1359-8368(01)00050-6

M. Kupke, K. Schulte, and R. Schüler, Non-destructive testing of FRP by d.c. and a.c. electrical methods, Composites Science and Technology, vol.61, issue.6, pp.61-837, 2001.
DOI : 10.1016/S0266-3538(00)00180-9

S. V. Kuznetsov, Subsonic lamb waves in anisotropic layers, Journal of Applied Mathematics and Mechanics, vol.65, issue.2, pp.291-299, 2001.
DOI : 10.1016/S0021-8928(01)00033-8

P. Ladevèze and E. L. Dantec, Damage modelling of the elementary ply for laminated composites, Composites Science and Technology, vol.43, issue.3, pp.257-268, 1992.
DOI : 10.1016/0266-3538(92)90097-M

P. Ladevèze and G. Lubineau, On a damage mesomodel for laminates: micromechanics basis and improvement, Mechanics of Materials, vol.35, issue.8, pp.763-775, 2003.
DOI : 10.1016/S0167-6636(02)00204-1

P. Ladevèze, A damage computational method for composite structures. Computers and Structures, pp.79-87, 1992.

N. Lahellec, C. Bordreuil, and C. Hochard, Etude de critères non locaux pour la rupture fragile de composites stratifiés à fibres de carbones, Mécanismes et Mécanique des Matériaux et Structures à Longueur interne

F. Lalande, Z. Chaudhry, and C. A. Rogers, Impedance-based modelling of actuators bounded to shell structures, Journal of Intelligent Material Systems and Structures, issue.66, pp.765-775, 1995.

L. Roux, J. C. , and P. Herzog, Effect of suspension on electrodynamic loudspeaker, Proceedings of the 31 st Conference on Acoustics, 1994.

L. Roux and J. C. , Le haut-parleur électrodynamique : estimation des paramètres électroacoustiques aux basses fréquences et modélisation de la suspension, Thèse de l' Université du Maine, 1994.

D. C. Lee, Monitoring of fatigue damage of composite structures by using embedded intensity-based optical fiber sensors, Smart Materials and Structures, vol.10, issue.2, pp.285-292, 2001.
DOI : 10.1088/0964-1726/10/2/313

J. Lee, Plate waves in multi-directional composite laminates. Composite Structures, pp.289-297, 1999.

F. Levassort, A matrix method for modeling electroelastic moduli of 0-3 piezo-composites, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control, vol.44, issue.2, pp.445-452, 1997.
DOI : 10.1109/58.585129

M. Lin and F. Chang, The manufacture of composite structures with a built-in network of piezoceramics, Composites Science and Technology, vol.62, issue.7-8, pp.7-8, 2002.
DOI : 10.1016/S0266-3538(02)00007-6

S. F. Ling and Y. Xie, Detecting mechanical impedance of structures using the sensing capability of a piezoceramic inertial actuator, Sensors and Actuators A: Physical, vol.93, issue.3, pp.93-243, 2001.
DOI : 10.1016/S0924-4247(01)00660-4

Y. Mizutani, Fracture mechanism characterization of cross-ply carbon-fiber composites using acoustic emission analysis, NDT & E International, vol.33, issue.2, pp.101-110, 2000.
DOI : 10.1016/S0963-8695(99)00030-4

T. Monnier, The piezoelectric implant method: implementation and practical applications, Smart Materials and Structures, pp.267-272, 2000.
DOI : 10.1088/0964-1726/9/3/303

URL : https://hal.archives-ouvertes.fr/hal-00743166

T. Monnier, Ondes de Lamb dans les milieux stratifiés Application à la surveillance in situ et en temps réel de l' endommagement de structures composites, Thèse de l'INSA de Lyon, 2001.

E. Moulin, Modeling of integrated Lamb waves generation systems using a coupled finite element???normal modes expansion method, Ultrasonics, vol.38, issue.1-8, pp.1-8, 2000.
DOI : 10.1016/S0041-624X(99)00138-9

URL : https://hal.archives-ouvertes.fr/hal-00159052

A. D. Nayfeh and J. M. Ndambi, Wave propagation in layered anisotropic media with applications to composites Comparison of techniques for modal analysis of concrete structures, Engineering Structures, issue.9, pp.22-1159, 1995.

M. Niethammer, Time-frequency representations of Lamb waves, The Journal of the Acoustical Society of America, vol.109, issue.5, pp.1841-1847, 2001.
DOI : 10.1121/1.1357813

Y. Okabe, N. Tanaka, and N. Takeda, Effect of fiber coating on crack detection in carbon fiber reinforced plastic composites using fiber Bragg grating sensors. Smart materials and structures, pp.11-892, 2002.

D. Osmont, Health monitoring of Sandwich plates based on the analysis of the interaction of Lamb waves with damages Ecole Normale Supérieure de Cachan, France. [76] Payan, J. and C. Hochard, Damage modelling of laminated carbon/epoxy composites under static and fatigue loading, Proceedings of Conference on Structural Health Monitoring, pp.2-4, 2001.

B. Petitjean, J. Saniger, J. Dupuis, and U. , Maintenance flexibility through structural health monitoring: Examples on EADS products Mohanty, Detection and monitoring of cracks using mechanical impedance of rotor-bearing system, Proceedings of Conference on Structural Health Monitoring, pp.110-2351, 2001.

M. Rahmoune, New Thin Piezoelectric Plate Models, Journal of Intelligent Material Systems and Structures, vol.34, issue.3, pp.1017-1029, 1998.
DOI : 10.1177/1045389X9800901207

N. Saint-pierre, Ultrasonic evaluation of dispersive polymers by the piezoelectric embedded element method: modeling and experimental validation, Ultrasonics, vol.36, issue.6, pp.36-783, 1998.
DOI : 10.1016/S0041-624X(97)00158-3

R. Schueler, S. P. Joshi, and K. Schulte, Damage detection in CFRP by electrical conductivity mapping, Composites Science and Technology, vol.61, issue.6, pp.61-921, 2001.
DOI : 10.1016/S0266-3538(00)00178-0

D. C. Seo and J. J. Lee, Damage detection of CFRP laminates using electrical resistance measurement and neural network, Composite Structures, vol.47, issue.1-4, pp.1-4, 1999.
DOI : 10.1016/S0263-8223(00)00016-7

M. M. Shokrieh and L. B. Lessard, Progressive Fatigue Damage Modeling of Composite Materials, Part I: Modeling, Journal of Composite Materials, vol.11, issue.4, pp.34-1056, 2000.
DOI : 10.1177/002199830003401301

S. Wen, D. D. , and D. D. Chung, Damage monitoring of cement paste by electrical resistance measurement, Cement and Concrete Research, vol.30, issue.12, pp.30-1979, 2000.
DOI : 10.1016/S0008-8846(00)00351-3

F. P. Sun, Truss Structure Integrity Identification Using PZT Sensor-Actuator, Journal of Intelligent Material Systems and Structures, vol.25, issue.9, pp.134-139, 1995.
DOI : 10.1177/1045389X9500600117

K. S. Tan, N. Guo, and B. S. Wong, Experimental evaluation of delaminations in composite plates by the use of Lamb waves, Composites Science and Technology, vol.53, issue.1, pp.77-84, 1995.
DOI : 10.1016/0266-3538(94)00076-X

T. Tanaka, T. Fujii, and M. Kamada, Effect of loading path on the stressstrain relation and progressive damage of a polymer-matrix composite under tension/torsion biaxial loading, Journal of thermoplastic composite materials, issue.9, pp.329-341, 1996.

A. Todoroki and Y. Tanaka, Delamination identification of cross-ply graphite/epoxy composite beams using electric resistance change method, Composites Science and Technology, vol.62, issue.5, pp.62-629, 2002.
DOI : 10.1016/S0266-3538(02)00013-1

O. Toshiko, N. Asami, and H. Hiroyuki, Initial fracture behavior of satin woven fabric composites. Composite Structures, pp.333-339, 2003.

M. Tracy and F. Chang, Identifying Impacts in Composite Plates with Piezoelectric Strain Sensors, Part II: Experiment, Journal of Intelligent Material Systems and Structures, vol.34, issue.1, pp.929-937, 1998.
DOI : 10.1177/1045389X9800901109

M. Tracy and F. Chang, Identifying impacts in composite plates with piezoelectric strain sensors, part I: Piezoelectric strain sensors, Journal of Intelligent Material Systems and Structures, issue.911, pp.920-928, 1998.

S. W. Tsaï, Composites design, Think Composites, 1988.

B. T. Wang and R. L. Chen, Use of piezoceramic transducers for smart structural testing, Smart Structures and Materials 2000: Smart Structures and Integrated Systems, pp.713-724, 2000.
DOI : 10.1117/12.389183

L. Wang and S. I. Rokhlin, Stable reformulation of transfer matrix method for wave propagation in layered anisotropic media, Ultrasonics, vol.39, issue.6, pp.413-424, 2001.
DOI : 10.1016/S0041-624X(01)00082-8

Q. Wang and S. T. Quek, A Model for the Analysis of Beams with Embedded Piezoelectric Layers, Journal of Intelligent Materials Systems and Structures, vol.13, issue.1, pp.61-70, 2002.
DOI : 10.1177/1045389X02013001979

M. Wevers, Listening to the sound of materials: Acoustic emission for the analysis of material behaviour, NDT & E International, vol.30, issue.2, pp.99-106, 1997.
DOI : 10.1016/S0963-8695(96)00051-5

P. D. Wilcox, M. Lowe, and P. Cawley, The effect of dispersion on long-range inspection using ultrasonic guided waves, NDT & E International, vol.34, issue.1, pp.1-9, 2001.
DOI : 10.1016/S0963-8695(00)00024-4

C. Wolfinger, Health-monitoring-system based on piezoelectric transducers, Aerospace Science and Technology, vol.2, issue.6, pp.391-400, 1998.
DOI : 10.1016/S1270-9638(99)80027-3

X. Zhou, A. , A. Chattopadhyay, and R. Thornburgh, Analysis of Piezoelectric Smart Composites Using a Coupled Piezoelectric-Mechanical Model, Journal of Intelligent Material Systems and Structures, vol.11, issue.3, pp.169-179, 2000.
DOI : 10.1106/50V9-519W-QVUV-AL7L