M. Asanabe, R. Akahoshi, and . Asai, Theoretical and experimental investigation on misaligned journal bearing performance Effects of journal misalignment on the performance characteristics of three-lobe bearings, IMechE Tribology convention Wear, vol.206, pp.122-129, 1971.

]. J. Aus60 and . Ausman, Torque produced by misalignment of hydrodynamic gaslubricated journal bearings, ASME Journal of Basic Engineering, vol.82, pp.335-341, 1960.

]. R. Ban76 and . Bannister, A theoretical and experimental investigation illustrting the influence of non-linearity and misalignment on the eight oil film force coefficients, IMechE, Conf. Vibrations in Rotating Machinery, pp.271-278, 1976.

H. [. Banwait and . Chandrawat, Study of thermal boundary conditions for a plain journal bearing, Tribology International, vol.31, issue.6, pp.31289-296, 1998.
DOI : 10.1016/S0301-679X(98)00029-2

H. [. Banwait, M. Chandrawat, and . Adithan, Thermohydrodynamic analysis of misaligned plain journal bearing, Proc. Asiatrib'98, pp.35-40, 1998.

J. [. Boncompain and . Frêne, Thermohydrodynamic of finite journal bearing -static and dynamic characteristics, Proc. of the 6th Leeds-Lyon Symposium on Tribology, pp.34-41, 1979.

M. [. Bouyer and . Fillon, Experimental study on thermal effects of a misaligned hydrodynamic journal bearing, 7th Portuguese Conference on Tribology, pp.63-66, 2000.

M. [. Bouyer and . Fillon, An Experimental Analysis of Misalignment Effects on Hydrodynamic Plain Journal Bearing Performances, Journal of Tribology, vol.124, issue.2, pp.313-319, 2002.
DOI : 10.1115/1.1402180

M. [. Bouyer and . Fillon, Improvement of the THD Performance of a Misaligned Plain Journal Bearing, Journal of Tribology, vol.125, issue.2, pp.334-342, 2003.
DOI : 10.1115/1.1510883

M. [. Boncompain, J. Fillon, and . Frêne, Analysis of Thermal Effects in Hydrodynamic Bearings, Journal of Tribology, vol.108, issue.2, pp.219-224, 1986.
DOI : 10.1115/1.3261166

M. [. Bouchoule, D. Fillon, F. Nicolas, and . Barret, Experimental Study of Thermal Effects in Tilting-Pad Journal Bearings at High Operating Speeds, Journal of Tribology, vol.118, issue.3, pp.532-537, 1996.
DOI : 10.1115/1.2831570

J. [. Buckholz and . Lin, The Effect of Journal Bearing Misalignment on Load and Cavitation for Non-Newtonian Lubricants, Journal of Tribology, vol.108, issue.4, pp.645-654, 1986.
DOI : 10.1115/1.3261295

]. R. Bon84 and . Boncompain, Les paliers lisses en régime thermohydrodynamique -aspects théoriques et expérimentaux, Thèse de Doctorat d'état, 1984.

W. [. Buske and . Rolli, Measurements of oil-film pressures in bearings under constant and variable loads, p.43, 1949.

J. [. Bou-said, Influence du mésalignement sur les caractéristiques dynamiques des paliers à lobes, Journal of Theoretical and Apllied Mechanics, vol.6, pp.409-421, 1987.

D. [. Bou-said and . Nicolas, Effects of Misalignment on Static and Dynamic Characteristics of Hybrid Bearings, Tribology Transactions, vol.19, issue.5, pp.325-331, 1992.
DOI : 10.1080/10402009208982124

]. F. Cbh91a, M. J. Choy, Y. Braun, and . Hu, Nonlinear effects in a plain journal bearing : Part1-analytical study, ASME Journal of Tribology, vol.113, pp.555-562, 1991.

]. F. Cbh91b, M. J. Choy, Y. Braun, and . Hu, Nonlinear effects in a plain journal bearing : Part2-results, ASME Journal of Tribology, vol.113, pp.563-570, 1991.

D. [. Craighead, R. S. Dowson, C. Sharp, and . Taylor, The influence of thermal effects and shaft misalignment on the dynamic behaviour of fluid film bearings, IMechE, pp.47-55, 1980.

X. [. Cookson, S. S. Feng, and . Kossa, The Effect of Journal Misalignment on the Oil-Film Forces Generated in a Squeeze Film Damper, Journal of Engineering for Power, vol.105, issue.3, pp.560-564, 1983.
DOI : 10.1115/1.3227454

M. [. Costa, A. S. Fillon, J. C. Miranda, and . Claro, An Experimental Investigation of the Effect of Groove Location and Supply Pressure on the THD Performance of a Steadily Loaded Journal Bearing, Journal of Tribology, vol.122, issue.1, pp.227-232, 2000.
DOI : 10.1115/1.555347

]. W. Cop49 and . Cope, The hydrodynamic theory of film lubrication, Proc. Roy. Soc. A, pp.201-217, 1949.

]. F. Cow40 and . Cowlin, The lubrication of steam-turbine driven electric generators, Proc. IMechE, p.83, 1940.

W. [. Cameron and . Wood, Parallel Surface Thrust Bearing, A S L E Transactions, vol.8, issue.2, pp.254-258, 1958.
DOI : 10.1098/rspa.1949.0059

Q. Chang, P. Yang, Y. Meng, and S. Wen, Thermoelastohydrodynamic analysis of the static performance of tilting-pad journal bearings with the Newton???Raphson method, Tribology International, vol.35, issue.4, pp.225-234, 2002.
DOI : 10.1016/S0301-679X(01)00108-6

]. A. Dad98 and . Dadouche, Etude des phénomènes thermiques dans les butées hydrodynamiques, Thèse de Doctorat, 1998.

P. [. Duckworth and . Forrester, Wear of lubricated journal bearings, Proc. Inst. Mech. Engers., Conference On Lubrication and Wear, pp.714-719, 1957.

M. [. Desbordes, C. C. Fillon, H. Wai, and J. Frêne, Dynamic Analysis of Tilting-Pad Journal Bearing???Influence of Pad Deformations, Journal of Tribology, vol.116, issue.3, pp.621-627, 1994.
DOI : 10.1115/1.2928890

M. [. Desbordes, J. Fillon, C. Frêne, and . Wai, The Effects of Three-Dimensional Pad Deformations on Tilting-Pad Journal Bearings Under Dynamic Loading, Journal of Tribology, vol.117, issue.3, pp.379-384, 1995.
DOI : 10.1115/1.2831262

S. [. Das, A. K. Guha, and . Chattopadhyay, On the steady-state performance of misaligned hydrodynamic journal bearings lubricated with micropolar fluids, Tribology International, vol.35, issue.4, pp.201-210, 2002.
DOI : 10.1016/S0301-679X(01)00065-2

J. [. Dowson and . Hudson, A thermohydrodynamic analysis of the infinite slider-bearing : Part i, the plane inclined slider-bearing, Proc IMechE, Lubrication and Wear Convention, pp.34-44, 1964.

J. [. Dowson, B. Hudson, C. N. Hunter, and . March, A thermohydrodynamic analysis of the fluid film lubrication, Int. J. Mech. Sc, vol.181, issue.3B, pp.70-80, 1966.

J. [. Dufrane, T. H. Kannel, and . Mccloskey, Wear of Steam Turbine Journal Bearings at Low Operating Speeds, Journal of Lubrication Technology, vol.105, issue.3, pp.313-317, 1983.
DOI : 10.1115/1.3254599

H. [. Dubois, F. W. Mabie, and . Ocvirk, Experimental investigation of oil film pressure distribution for misaligned plain bearings. NACA, tech. note 2507, 1951.

F. [. Dubois, R. L. Ocvirk, and . Wehe, Properties of misaligned journal bearings, ASME, vol.79, pp.1205-1212, 1957.

]. A. Dow62 and . Dowson, A generalized reynolds equation for fluid film lubrication

D. [. El-deihi and . Gethin, A Thermohydrodynamic Analysis of a Twin Axial Groove Bearing Under Different Loading Directions and Comparison With Experiment, Journal of Tribology, vol.114, issue.2, pp.304-310, 1992.
DOI : 10.1115/1.2920888

]. H. Elr81 and . Elrod, A cavitation algorithm, ASME Journal of lubrication technology, vol.103, issue.3, pp.350-354, 1981.

]. H. Elr91 and . Elrod, Efficient numerical method for computation of the thermohydrodynamics of laminar lubricating films, ASME Journal of Tribology, vol.113, pp.506-511, 1991.

J. [. Fillon and . Bouyer, Experimental study of a plain journal bearings : Influence of direction and intensity of misalignment torque on bearing performances, Proc. of 16th Brazilian Congress of Mechanical Engineering, pp.42-49, 2001.

J. [. Fillon and . Bouyer, Thermohydrodynamic analysis of a worn plain journal bearing, Tribology International, vol.37, issue.2, 2004.
DOI : 10.1016/S0301-679X(03)00051-3

J. [. Fillon, J. Bligoud, and . Frêne, Experimental Study of Tilting-Pad Journal Bearings???Comparison With Theoretical Thermoelastohydrodynamic Results, Journal of Tribology, vol.114, issue.3, pp.579-588, 1992.
DOI : 10.1115/1.2920920

]. J. Fer82 and . Ferron, Contribution à l'étude des phénomènes thermiques dans les paliers hydrodynamiques, Thèse de 3è cycle, 1982.

J. [. Ferron and . Frene, Etude thermohydrodynamique des paliers lisses, construction d'une machine d'essai. Compte-rendu de fin d'étude d'une recherche financée par la DGRST, 1980.

J. [. Ferron, R. Frêne, and . Boncompain, A Study of the Thermohydrodynamic Performance of a Plain Journal Bearing Comparison Between Theory and Experiments, Journal of Lubrication Technology, vol.105, issue.3, pp.422-428, 1983.
DOI : 10.1115/1.3254632

J. [. Fillon, R. Frêne, and . Boncompain, Historical aspects and present development on thermal effects in hydrodynamic bearings, Proc. of 13th Leeds- Lyon Symposium on Tribology, pp.27-47, 1987.

]. M. Fil85 and . Fillon, Contribution à l'étude des phénomènes thermiques dans les paliers à patins oscillants, Thèse de 3è cycle, 1985.

]. A. Fis22 and . Fisher, Oil flow in ring lubricated bearings. Machinery, p.311, 1922.

M. [. Fillon and . Khonsari, Thermohydrodynamic Design Charts for Tilting-Pad Journal Bearings, Journal of Tribology, vol.118, issue.1, pp.232-238, 1996.
DOI : 10.1115/1.2837084

P. [. Fitzgerald and . Neal, Temperature Distributions and Heat Transfer in Journal Bearings, Journal of Tribology, vol.114, issue.1, pp.122-130, 1992.
DOI : 10.1115/1.2920850

]. A. Fog46 and . Fogg, Fluid film lubrication of parallel thrust surfaces, Proc IMechE, vol.155, pp.49-53, 1946.

]. P. For60 and . Forrester, Bearing and journal wear, Symp. on Wear in the Gasoline Engine, pp.75-91, 1960.

A. [. Freund and . Tieu, A Thermo-Elasto-Hydrodynamic Study of Journal Bearing With Controlled Deflection, Journal of Tribology, vol.115, issue.3, pp.550-556, 1993.
DOI : 10.1115/1.2921673

[. Garnier, D. Bonneau, and C. Grente, Three-Dimensional EHD Behavior of the Engine Block/Crankshaft Assembly for a Four Cylinder Inline Automotive Engine, Journal of Tribology, vol.121, issue.4, pp.721-730, 1999.
DOI : 10.1115/1.2834128

]. D. Get88 and . Gethin, A finite element approach analysing thermohydrodynamic lubrication in journal bearings, Tribology International, vol.21, issue.2, pp.67-75, 1988.

]. D. Get96 and . Gethin, Modelling the thermohydrodynamic behaviour of high speed journal bearings, Tribology International, vol.29, issue.7, pp.579-596, 1996.

C. [. Gupta, A. Z. Hammond, and . Szeri, An Approximate THD Theory for Journal Bearings, Journal of Tribology, vol.112, issue.2, pp.224-229, 1990.
DOI : 10.1115/1.2920245

G. [. Galletti-manacorda and . Capriz, Torque Produced by Misalignment in Short Lubricated Bearings, Journal of Basic Engineering, vol.87, issue.4, pp.847-849, 1965.
DOI : 10.1115/1.3650828

. [. Gandjalikhan, M. S. Nassab, and . Moayeri, Three-dimensionnal thermohydrodynamic analysis of axially grooved journal bearings, IMechE (Part J), vol.216, pp.35-47, 2002.

]. P. Goe84 and . Goenka, Dynamically loaded journal bearings : finite element method analysis, ASME Journal of Tribology, vol.106, pp.429-439, 1984.

]. S. Guh00 and . Guha, Analysis of steady-state characteristics of misaligned hydrodynamic journal bearings with isotropic roughness effect, Tribology International, vol.33, pp.1-12, 2000.

]. A. Hag44 and . Hagg, Heat effects in lubricating films, Journal of Applied Mechanics, vol.11, pp.72-76, 1944.

D. [. Hoang and . Bonneau, Approche expérimentale de la lubrification ehd des paliers de tête de bielle sous chargement dynamique, Proc. 15ème Congrès Français de Mécanique, 2001.

]. G. Hir54 and . Hirn, Sur les principaux phénomènes que présentent les frottements médiats, et sur les diverses méthodes employées au graissage des machines, pp.188-277, 1854.

H. [. Hu, N. S. Miah, E. J. Feng, and . Hahn, A rig for testing lateral misalignment effects in a flexible rotor supported on three or more hydrodynamic journal bearings, Tribology International, vol.33, issue.3-4, pp.197-204, 2000.
DOI : 10.1016/S0301-679X(00)00027-X

]. L. Hoâ02 and . Hoâng, Modélisation expérimentale de la lubrification thermoélastohydrodynamique des paliers de tête de bielle. comparaison entre les résultats théoriques et expérimentaux, Thèse de Doctorat, 2002.

O. [. Heshmat and . Pinkus, Misalignment in Thrust Bearings Including Thermal and Cavitation Effects, Journal of Tribology, vol.109, issue.1, pp.108-114, 1987.
DOI : 10.1115/1.3261299

R. [. Han and . Paranjpe, A Finite Volume Analysis of the Thermohydrodynamic Performance of Finite Journal Bearings, Journal of Tribology, vol.112, issue.3, pp.557-566, 1990.
DOI : 10.1115/1.2920293

S. [. Huber, W. Strzelecki, and . Steinhilper, Theoretical and experimental determination of the performances of misaligned and statically loaded cylindrical journal bearings. The Institution of Engineers Australia, pp.243-248, 1998.

R. [. Hori and . Uematsu, Influence of misalignment of support journal bearings on stability of a multi-rotor system, Tribology International, vol.13, issue.5, pp.249-25262, 1974.
DOI : 10.1016/0301-679X(80)90084-5

]. H. Hwn86a, S. Hashimoto, K. Wada, and . Nojima, Performance characteristics of worn journal bearings in both laminar and turbulent regimes. part 1 : Steady-state characteristics, ASLE Trans, vol.29, issue.4, pp.565-571, 1986.

]. H. Hwn86b, S. Hashimoto, K. Wada, and . Nojima, Performance characteristics of worn journal bearings in both laminar and turbulent regimes. part 2 : Dynamic characteristics, ASLE Trans, vol.29, issue.4, pp.572-577, 1986.

S. [. Ikeuchi, K. Katsuse, H. Hamamura, and . Mori, Effects of misalignment in full journal bearing with circumferential oil groove, Proc. of the JSLE International Tribology Conference, pp.67-72, 1985.

]. R. Jak85 and . Jakeman, Performance and oil film dynamic coefficients of a misaligned sterntube bearing, Transactions of ASLE, vol.29, issue.4, pp.441-450, 1985.

]. R. Jak89 and . Jakeman, Non-linear oil film response model for the dynamically misaligned sterntube bearing, Tribology International, vol.22, issue.1, pp.3-10, 1989.

C. [. Jang and . Chang, Adiabatic solutions for a misaligned journal bearing with non-Newtonian lubricants, Tribology International, vol.20, issue.5, pp.267-275, 1987.
DOI : 10.1016/0301-679X(87)90027-2

]. G. Kat72 and . Katzenmeier, The influence of materials and surface quality on wear behaviour and load capacity of journal bearings, Proc. Inst. Mech. Engers., Tribology Convention, pp.80-84, 1972.

J. [. Khonsari and . Beaman, Thermohydrodynamic Analysis of Laminar Incompressible Journal Bearings, A S L E Transactions, vol.13, issue.2, pp.141-150, 1985.
DOI : 10.1115/1.3451767

M. [. Kucinschi and . Fillon, An Experimental Study of Transient Thermal Effects in a Plain Journal Bearing, Journal of Tribology, vol.121, issue.2, pp.327-332, 1999.
DOI : 10.1115/1.2833940

M. [. Kucinschi, J. Fillon, M. D. Frêne, and . Pascovici, A Transient Thermoelastohydrodynamic Study of Steadily Loaded Plain Journal Bearings Using Finite Element Method Analysis, Journal of Tribology, vol.122, issue.1, pp.219-226, 2000.
DOI : 10.1115/1.555346

]. M. Kho87a and . Khonsari, A review of thermal effects in hydrodynamic bearings. part i : Slider and thrust bearings, ASLE Transactions, vol.30, issue.1, pp.19-25, 1987.

]. M. Kho87b and . Khonsari, A review of thermal effects in hydrodynamic bearings. part ii : Journal bearings, ASLE Transactions, vol.30, issue.1, pp.26-33, 1987.

]. A. Kin33 and . Kingsbury, Heat effects in lubricated films, Mechanical Engineering, vol.55, pp.685-688, 1933.

J. [. Khonsari, M. Jang, and . Fillon, On the Generalization of Thermohydrodynamic Analyses for Journal Bearings, Journal of Tribology, vol.118, issue.3, pp.571-579, 1996.
DOI : 10.1115/1.2831576

]. A. Km96a, S. S. Kumar, and . Mishra, Stability of a rigid rotor in turbulent hydrodynamic worn journal bearings, Wear, vol.193, pp.25-30, 1996.

]. A. Km96b, S. S. Kumar, and . Mishra, Steady state analysis of non-circular worn journal bearings in nonlaminar lubrication regimes, Tribology International, vol.29, issue.6, pp.493-498, 1996.

]. B. Kuc98 and . Kucinschi, Etude des instabilités thermiques des paliers à frottement fluide, Thèse de Doctorat, 1998.

S. [. Khonsari and . Wang, On The Fluid-Solid Interaction in Reference to Thermoelastohydrodynamic Analysis of Journal Bearings, Journal of Tribology, vol.113, issue.2, pp.398-404, 1991.
DOI : 10.1115/1.2920635

]. S. Lar91a and . Laroze, Mécanique des structures, tome 3 : Thermique des structures, dynamique des structures, p.18, 1991.

]. S. Lar91b and . Laroze, Mécanique des structures, tome 3 : Thermique des structures, dynamique des structures, de l'Aéronautique et de l'Espace, pp.28-29, 1991.

P. [. Lund and . Hansen, An Approximate Analysis of the Temperature Conditions in a Journal Bearing. Part I: Theory, Journal of Tribology, vol.106, issue.2, pp.228-236, 1984.
DOI : 10.1115/1.3260890

H. [. Lin and . Rylander-jr, Performance Characteristics of Compliant Journal Bearings, Journal of Tribology, vol.113, issue.3, pp.639-644, 1991.
DOI : 10.1115/1.2920672

J. [. Lund and . Tonnesen, An Approximate Analysis of the Temperature Conditions in a Journal Bearing. Part II: Application, Journal of Tribology, vol.106, issue.2, pp.237-245, 1984.
DOI : 10.1115/1.3260891

]. P. Mas89 and . Maspeyrot, Comportement dynamique des paliers de vilebrequin. influence des défauts de forme et des mésalignements, Thèse de Doctorat, 1989.

D. Souchet, P. Michaud, and D. Bonneau, Etude thermique d'un palier de tête de bielle, Proc. 15ème Congrès Français de Mécanique, 2001.

J. [. Maspeyrot and . Frene, Paper III (i) Comparison between Aligned and Misaligned Bearings under Dynamic Loading in both Quasi-Static and Dynamic Misalignment, proceedings of the 17th Leeds-Lyon symposium on tribology, 1990.
DOI : 10.1016/S0167-8922(08)70116-0

M. [. Monmousseau and . Fillon, Analysis of static and dynamic misaligned tilting-pad journal bearings, Proc. Instn Mech Engrs, pp.253-261, 1999.
DOI : 10.1243/1350650991542640

M. [. Monmousseau, J. Fillon, and . Frêne, Transient Thermoelastohydrodynamic Study of Tilting-Pad Journal Bearings???Comparison Between Experimental Data and Theoretical Results, Journal of Tribology, vol.119, issue.3, pp.401-407, 1997.
DOI : 10.1115/1.2833501

]. P. Mff98a, M. Monmousseau, J. Fillon, and . Frêne, Transiant thermoelastohydrodynamic study of tilting-pad journal bearings -application to bearing seizure

]. P. Mff98b, M. Monmousseau, J. Fillon, and . Frêne, Transiant thermoelastohydrodynamic study of tilting-pad journal bearings under dynamic loading, ASME Journal of Engineering for Gas Turbines and Power, vol.120, pp.405-409, 1998.

D. [. Medwell and . Gethin, Synthesis of thermal effects in misaligned hydrodynamic journal bearings, International Journal for Numerical Methods in Fluids, vol.87, issue.7, pp.445-458, 1986.
DOI : 10.1002/fld.1650060704

S. [. Markho, T. B. Grewal, and . Stowell, An Experimental Investigation of the Effect of Misalignment and Directionality on the Performance of an Externally-Pressurized, Orifice-Compensated Air Journal Bearing, Journal of Lubrication Technology, vol.101, issue.1, pp.28-37, 1979.
DOI : 10.1115/1.3453274

Y. [. Mitsui, M. Hori, and . Tanaka, Thermohydrodynamic Analysis of Cooling Effect of Supply Oil in Circular Journal Bearing, Journal of Lubrication Technology, vol.105, issue.3, pp.414-421, 1983.
DOI : 10.1115/1.3254629

Y. [. Mitsui, M. Hori, and . Tanaka, An Experimental Investigation on the Temperature Distribution in Circular Journal Bearings, Journal of Tribology, vol.108, issue.4, pp.621-627, 1986.
DOI : 10.1115/1.3261285

]. J. Mit87 and . Mitsui, A study of thermohydrodynamic lubrication in circular journal bearing, Tribology International, vol.20, issue.6, pp.331-341, 1987.

T. [. Mckee and . Mckee, Pressure distribution in oil films of journal bearings, pp.149-165, 1932.

]. P. Mon97 and . Monmousseau, Etude thermoélastohydrodynamique des paliers à patins oscillants en régime transitoire, Thèse de Doctorat, 1997.

A. [. Majumdar and . Saha, Temperature distribution in oil journal bearings, Wear, vol.28, issue.2, pp.259-266, 1974.
DOI : 10.1016/0043-1648(74)90166-5

M. O. Mokhtar, Z. S. Safar, and M. A. Abd-el-rahman, An Adiabatic Solution of Misaligned Journal Bearings, Journal of Tribology, vol.107, issue.2, pp.263-267, 1985.
DOI : 10.1115/1.3261041

[. Ma and C. M. Taylor, Prediction of Temperature Fade in the Cavitation Region of Two-Lobe Journal Bearings, Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, vol.112, issue.4, pp.133-139, 1994.
DOI : 10.1243/PIME_PROC_1994_208_360_02

[. Ma and C. M. Taylor, An experimental investigation of thermal effects in circular and elliptical plain journal bearings, Tribology International, vol.29, issue.1, pp.19-26, 1996.
DOI : 10.1016/0301-679X(95)00029-4

[. Ma and C. M. Taylor, A comparative thermal analysis of the static performance of different fixed profile bore plain bearings, Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, vol.105, issue.1, pp.13-30, 1999.
DOI : 10.1243/1350650991542578

[. Nicolas and J. Frêne, Tilting torque permissible in plain bearings. theory, experimental results and application to machine design. First European Tribology Congress, 1973.

]. D. Nic72 and . Nicolas, Les paliers hydrodynamiques soumis à un torseur de forces quelconque, 1972.

C. [. Ng and . Pan, A Linearized Turbulent Lubrication Theory, Journal of Basic Engineering, vol.87, issue.3, pp.675-688, 1965.
DOI : 10.1115/1.3650640

C. [. Nikolakopoulos and . Papadopoulos, Non-linearities in misaligned journal bearings, Tribology International, vol.27, issue.4, pp.243-257, 1994.
DOI : 10.1016/0301-679X(94)90004-3

C. [. Nikolakopoulos and . Papadopoulos, Lyapunov???s Stability of Nonlinear Misaligned Journal Bearings, Journal of Engineering for Gas Turbines and Power, vol.117, issue.3, pp.593-599, 1995.
DOI : 10.1115/1.2814134

K. [. Ono and . Hayashi, Fatigue phenemenon of engine bearings with misaligned journal, proceedings of the 27th Leeds-Lyon symposium on tribology, 1999.

]. M. Pas70 and . Pascovici, The circumferential temperature distribution of complete journal bearings, Wear, vol.16, pp.143-147, 1970.

]. M. Pas74 and . Pascovici, Experimental study of the influence of heat transfer on the temperature distribution in a lubricant film, Wear, vol.29, pp.59-67, 1974.

S. [. Pinkus and . Bupara, Analysis of Misaligned Grooved Journal Bearings, Journal of Lubrication Technology, vol.101, issue.4
DOI : 10.1115/1.3453402

J. [. Pierre, M. Bouyer, and . Fillon, Thermohydrodynamic study of misaligned journal bearings-comparision between experimental data and theoretical results, Int. J. of Applied Mechanics and Engineering, vol.7, pp.949-960, 2002.

M. [. Pierre and . Fillon, Influence of geometric parameters and operating conditions on the thermohydrodynamic behaviour of plain journal bearings, Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, vol.2, issue.5, pp.445-457, 2000.
DOI : 10.1243/1350650001543322

T. [. Paranjpe and . Han, A Study of the Thermohydrodynamic Performance of Steadily Loaded Journal Bearings, Tribology Transactions, vol.88, issue.2, pp.679-690, 1994.
DOI : 10.1080/10402009408983347

]. I. Pie00 and . Pierre, Etude tridimensionnelle des effets thermohydrodynamiques dans les paliers alignés et mésalignés, Thèse de Doctorat, 2000.

]. R. Pig42 and . Piggott, Bearings and lubrication. bearing troubles traceable to design can be avoided by engineering study, Mech. Engng, vol.64, p.259, 1942.

]. O. Pin90 and . Pinkus, Thermal aspects of fluid film lubrication, 1990.

[. Nair, R. Sinhasan, and D. V. Singh, A study of elastohydrodynamic effects in a three-lobe journal bearing, Tribology International, vol.20, issue.3, pp.125-132, 1987.
DOI : 10.1016/0301-679X(87)90042-9

D. [. Pliakas and . Parkins, Single???axial groove journal bearings: static characteristics and a temperature prediction technique, Elastothermohydrodynamic effects in elliptical bearings. Tribology International, pp.43-4945, 1989.
DOI : 10.1243/PIME_PROC_1996_210_476_02

]. B. Pra97 and . Prabhu, An experimental investigation on the misalignment effects in journal bearings, STLE Tribology Transactions, vol.40, pp.235-242, 1997.

D. [. Piffeteau, D. Souchet, and . Bonneau, Influence of Thermal and Elastic Deformations on Connecting-Rod Big End Bearing Lubrication Under Dynamic Loading, Journal of Tribology, vol.122, issue.1, pp.181-192, 2000.
DOI : 10.1115/1.555341

D. [. Pinkus and . Wilcock, Thermal effects in fluid film bearings, Proc. of 6th Leeds-Lyon Symposium on Tribology, pp.3-23, 1980.

A. [. Qiu and . Tieu, Misalignment Effect on the Static and Dynamic Characteristics of Hydrodynamic Journal Bearings, Journal of Tribology, vol.117, issue.4, pp.717-723, 1995.
DOI : 10.1115/1.2831542

]. O. Rey86 and . Reynolds, On the theory of lubrication and its application on m. beauchamp towers's experiments. Phil. Trans, pp.157-234, 1886.

]. J. [-ric65 and . Rice, Misalignment torques of hydrodynamic gas lubricated journal bearings, ASME Journal of Basic Engineering, pp.193-198, 1965.

]. P. Roa94 and . Roache, Perspective : A method for uniform reporting of grid refinement studies, ASME Journal of Fluids Engineering, vol.116, pp.405-413, 1994.

B. [. Rajalingham and . Prabhu, Thermohydrodynamic Performance of a Plain Journal Bearing, A S L E Transactions, vol.103, issue.3, pp.368-372, 1987.
DOI : 10.1016/0043-1648(83)90236-3

B. [. Rajalingham, R. B. Prabhu, G. D. Bhat, and . Xistris, Influence of Thermal Conduction Across the Fluid Film on the THD Characteristics of a Plain Journal Bearing, Journal of Tribology, vol.116, issue.2, pp.397-399, 1994.
DOI : 10.1115/1.2927242

A. [. Reason and . Siew, Numerical solution for the design and performance evaluation of journal bearings with misalignment, IMechE, pp.77-85, 1982.

]. Z. Saf84 and . Safar, Energy loss due to misalignment of journal bearings, Tribology International, vol.17, issue.2, pp.107-109, 1984.

H. [. Sinhasan and . Chandrawat, An elastohydrodynamic study on two-axial-groove journal bearings, Tribology International, vol.21, issue.6, pp.341-351, 1988.
DOI : 10.1016/0301-679X(88)90111-9

H. [. Sinhasan and . Chandrawat, Analysis of a two-axial-groove journal bearing including thermoelastohydrodynamic effects, Tribology International, vol.22, issue.5, pp.347-353, 1989.
DOI : 10.1016/0301-679X(89)90151-5

R. [. Stokley and . Donaldson, Misalignment Effects In 180?? Partial Journal Bearings, A S L E Transactions, vol.89, issue.3, pp.216-226, 1969.
DOI : 10.1080/05698196908972265

M. [. Safar, D. M. Elkotb, and . Mokhtar, Analysis of Misaligned Journal Bearings Operating in Turbulent Regime, Journal of Tribology, vol.111, issue.2, pp.215-219, 1989.
DOI : 10.1115/1.3261891

R. [. Scharrer, R. I. Hecht, and . Hibbs, The Effects of Wear on the Rotordynamic Coefficients of a Hydrostatic Journal Bearing, Journal of Tribology, vol.113, issue.1, pp.210-213, 1991.
DOI : 10.1115/1.2920591

R. [. Swanson and . Kirk, Experimental Temperature and Pressure Profiles for Two Steadily Loaded Journal Bearings, Tribology Transactions, vol.199, issue.3, pp.601-606, 1995.
DOI : 10.1115/1.2920635

R. [. Swanson and . Kirk, Survey of Experimental Data for Fixed Geometry Hydrodynamic Journal Bearings, Journal of Tribology, vol.119, issue.4, pp.704-710, 1997.
DOI : 10.1115/1.2833874

S. [. Sudheer-kumar-reedy, B. S. Swarnamani, and . Prabhu, Thermoelastohydrodynamic Analysis of Tilting Pad Journal Bearing???Theory and Experiments, Tribology Transactions, vol.98, issue.1, pp.82-90, 2000.
DOI : 10.1115/1.2873856

W. [. Strzelecki and . Litwicki, Effect of misalignment on the spring and damping coefficients of the 2-lobe journal bearing, 1998.

H. [. Smalley and . Mccallion, Paper 5: The Effect of Journal Misalignment on the Performance of a Journal Bearing under Steady Running Conditions, Proceedings of the Institution of Mechanical Engineers, Conference Proceedings, vol.181, issue.2, pp.18139-18187, 1966.
DOI : 10.1243/PIME_CONF_1966_181_031_02

D. [. Safar, H. J. Mokhtar, and . Peeken, Thermal characteristics of misaligned finite journal bearings, Tribology International, vol.18, issue.1, pp.13-16, 1985.
DOI : 10.1016/0301-679X(85)90003-9

M. [. Safar and . Riad, Prediction of the coefficient of friction of a misaligned turbulent flow journal bearing, Tribology International, vol.21, issue.1, pp.15-19, 1988.
DOI : 10.1016/0301-679X(88)90122-3

R. [. Singh and . Sinhasan, Performance Characteristics of an Ungrooved Big-End Bearing with Misalignment, Tribology Transactions, vol.3, issue.2, pp.234-238, 1989.
DOI : 10.1016/0043-1648(87)90117-7

M. [. Suzuki and . Tanaka, Stability characteristics of worn journal bearings, Proceedings of Asia-Pacific Vibration Conference, pp.296-301, 1995.

Q. [. Shi and . Wang, A Mixed-TEHD Model for Journal-Bearing Conformal Contacts???Part I: Model Formulation and Approximation of Heat Transfer Considering Asperity Contact, Theory and experiment applied to journal bearing design. Proc. IMechE of the General Discussion on Lubrication and Lubricants, pp.198-205309, 1937.
DOI : 10.1115/1.2834410

]. M. Tan00 and . Tanaka, Recent thermohydrodynamic analyses and designs of thick-film beaings, Proc. IMechE, pp.107-122, 2000.

P. [. Tonnesen and . Hansen, Some Experiments on the Steady State Characteristics of a Cylindrical Fluid-Film Bearing Considering Thermal Effects, Journal of Tribology, vol.103, issue.1, pp.107-114, 1981.
DOI : 10.1115/1.3251597

]. S. Tim49 and . Timoshenko, Résistance des matériaux, tome 2 : Théorie développée et problèmes, pp.213-217, 1949.

. [. Tieu and N. O. Freund, A High Performance Journal Bearing With Controlled Elastic Deflection, Journal of Tribology, vol.117, issue.4, pp.702-708, 1995.
DOI : 10.1115/1.2831540

]. B. Tow83 and . Towers, First report on friction experiments, Proc. IMechE, pp.632-659, 1883.

Z. [. Tieu and . Qiu, Experimental Study of Freely Alignable Journal Bearings???Part 1: Static Characteristics, Journal of Tribology, vol.118, issue.3, pp.498-502, 1996.
DOI : 10.1115/1.2831565

]. D. Vij96 and . Vijayaraghavan, An efficient numerical procedure for thermohydrodynamic analysis of cavitated bearings, ASME Journal of Tribology, vol.118, pp.555-563, 1996.

. [. Vijayaraghavan, T. G. Jr, and . Keith, Analysis of a Finite Grooved Misaligned Journal Bearing Considering Cavitation and Starvation Effects, Journal of Tribology, vol.112, issue.1, pp.60-67, 1990.
DOI : 10.1115/1.2920231

T. [. Vaidyanathan and . Keith, Performance Characteristics of Cavitated Noncircular Journal Bearings in the Turbulent Flow Regime, Tribology Transactions, vol.27, issue.1, pp.35-44, 1991.
DOI : 10.1115/1.3451905

H. [. Walther and . Sassenfeld, Pressure distribution and load in a 360 ? bearing with inclined shaft. outline of procedure with an explanatory example, pp.1-7, 1950.

[. Wang and A. A. Seireig, Thermohydrodynamic Lubrication Analysis Incorporating Thermal Expansion Across the Film, Journal of Tribology, vol.116, issue.4, pp.681-689, 1994.
DOI : 10.1115/1.2927316

F. [. Wang, S. C. Shi, and . Lee, A Mixed-TEHD Model for Journal-Bearing Conformal Contact???Part II: Contact, Film Thickness, and Performance Analyses, Journal of Tribology, vol.120, issue.2, pp.206-213, 1998.
DOI : 10.1115/1.2834411

C. [. Wang, Q. Zhang, C. Wang, and . Lin, A mixed-TEHD analysis and experiment of journal bearings under severe operating conditions, Tribology International, vol.35, issue.6, pp.395-407, 2002.
DOI : 10.1016/S0301-679X(02)00021-X

O. [. Xu, D. Mian, and . Parker, Performance of a gear pump bearing taking into account elastic deflection of both housing and shaft, Proc. 2nd World Tribology Congress, Vienna, Austria(paper N ? 717) :CD, 4 pages, 2001.

M. [. Yu and . Adams, The linear model for rotor-dynamic properties of journal bearings and seals with combined radial and misalignment motions, Journal of Sound and Vibration, vol.131, issue.3, pp.367-378, 1989.
DOI : 10.1016/0022-460X(89)90999-1

[. Yang and M. Jeng, Analysis of thermal effects on the misaligned hydraulic servo cylinder, Tribology International, vol.34, issue.2, pp.95-106, 2001.
DOI : 10.1016/S0301-679X(00)00143-2

]. D. Zac98 and . Zachariadis, Short bearing model for the evaluation of journal's dynamic angular misalignment effects on rotor vibrations. international Gas Turbine and Aeroengine Congress and exhibition, 1998.

]. C. Zha02 and . Zhang, Tehd behavior of non-newtonian dynamically loaded journal bearings in mixed lubrication for direct problem, ASME Journal of Tribology, vol.124, pp.178-185, 2002.

Z. [. Zhang, Z. Yi, and . Zhang, THD Analysis of High Speed Heavily Loaded Journal Bearings Including Thermal Deformation, Mass Conserving Cavitation, and Turbulent Effects, Journal of Tribology, vol.122, issue.3, pp.597-602, 2000.
DOI : 10.1115/1.555407