C. Ruffles, « Applications of advanced composites in gas turbine aero engines, pp.123-130, 1993.

F. H. Froes, R. Widmer, and J. Hebeisen, Hot isostatic pressing of titanium based materials, Proceedings of the International Conference on Hot Isostatic Pressing, pp.3-18, 1996.
DOI : 10.1016/B978-0-444-89959-0.50013-X

]. S. Mall, T. Fecke, and M. A. Foringer, Titanium matrix composites -Mechanical Behavior, pp.1-22

]. S. Abkowitz, P. F. Weihrauch, H. L. Heussi, and S. Abkowitz, « P/M titanium matrix composites : from war games to fun and games, Proceedings of Titanium 95, pp.2722-2730, 1995.

]. C. Shira and F. H. Froes, Titanium Golf Clubs, MRS Bulletin, vol.23, issue.03, pp.42-46, 1998.
DOI : 10.1557/S0883769400029973

S. H. Teoh, R. Thampuran, K. H. Seah, and J. C. Goh, « The development of P/M titanium-graphite triphasic composites for biomedical applications », Journal of Materials Science Letters, vol.16, issue.8, pp.639-641, 1997.
DOI : 10.1023/A:1018567216717

P. D. Nicolaou, H. R. Piehler, and M. A. Kuhni, « Fabrication of Ti-6Al-4V matrix, SCS-6 fiber composites by hot pressing using the Foil-Fiber-Foil technique », Developments in Ceramic and Metal-Matrix Composites, pp.37-47, 1992.

J. M. Quenisset, K. Bilba, F. Della-martina, and Y. Lepetitcorps, « Elaboration et comportement mécanique des matériaux composites à matrice de titane ou d'aluminure riche en titaneLes composites à matrice métallique -Une synthèse, pp.63-72

]. Y. Lepetitcorps, T. Macke, R. Pailler, and J. M. Quenisset, « Titanium matrix composites reinforced by C.V.D filaments : a review of their thermo-mechanical capabilities, pp.185-191, 1988.

C. M. Cooke, D. Eylon, and F. H. Froes, « Development of rapidly solidified titanium matrix composites, Proceedings of Sixth World Conference on Titanium, pp.913-917, 1988.

D. M. Berczik, United States Patent, 1993.

]. R. Naslain, Introduction aux matériaux composites 2 -Matrices métalliques et céramiques, Editions du C.N.R.S, 1979.

H. Dudek, R. Leucht, and G. Ziegler, SiC-Fibre Reinforced Titanium Alloys: Processing, Interfaces and Mechanical Properties, pp.339-344, 1990.
DOI : 10.1007/978-94-009-0787-4_44

C. M. Ward-close and P. G. Partridge, A fibre coating process for advanced metal-matrix composites, Journal of Materials Science, vol.3, issue.10, pp.4315-4323, 1990.
DOI : 10.1007/BF00581090

C. M. Ward-close and L. Chandrasekaran, « Titanium alloy/SiC fibre MMC produced by the matrix coated fibre process, pp.659-660, 1994.

]. A. Vassel, C. Indrigo, and F. Pautonnier, « Processing of fibre reinforced titanium matrix composites by physical vapour deposition, Proceedings of Titanium 95, pp.2739-2746, 1995.

]. D. Upadhyaya, F. H. Froes, M. J. Wood, and C. M. Ward-close, « A new coating system for continuous SiC fiber for use in titanium based metal matrix composites, Proceedings of Titanium 95, pp.2747-2754, 1995.

H. Dudek, R. Leucht, and G. Ziegler, « Processing of parts made of SiC-fibre reinforced titanium using hot isostatic pressing, HIP) ». ECCM, vol.4, pp.393-398, 1990.

M. J. Wood, C. Loader, and L. Chandrasekaran, « Hot isostatic pressing of titanium alloy/SiC fibre metal matrix composites, Proceedings of the International Conference on Hot Isostatic Pressing, pp.193-197, 1996.

]. D. Upadhyaya, F. H. Froes, C. M. Ward-close, L. Chandrasekaran, and M. J. Wood, « PVD processing of continuous fibre-reinforced composites, Proceedings of Titanium 95, pp.2731-2738, 1995.

H. E. Deve, D. M. Elzey, J. M. Warren, and H. N. Wadley, « Consolidation processing of PVD Ti-6Al-4V coated SiC fiber composites »Advanced Structural Fiber Composites, pp.313-327, 1995.

]. L. Clochefert, Y. Lepetitcorps, C. Colin, and M. Chanteranne, « Continuous carbon fibre reinforced ?-TiAl matrix, Proceedings of Titanium 95, pp.527-533, 1995.

]. P. Renard, Brevet français, 1992.

R. R. Kieschke and T. W. Clyne, « Plasma processing of titanium-based composites, Proceedings of Sixth World Conference on Titanium, pp.1789-1794, 1988.

R. Vancheeswaran and H. N. Wadley, Model-based optimization of consolidation processing, Materials Science and Engineering: A, vol.244, issue.1, pp.58-66, 1998.
DOI : 10.1016/S0921-5093(97)00826-5

T. Valente and F. Carassiti, « Hot pressing of plasma-sprayed SiC fiber-reinforced Ti-6Al-4V alloy », Journal of Composites Technology and Research, vol.18, issue.2, pp.89-95, 1996.

Z. Fan, P. S. Grant, and B. Cantor, Manufacture of Hoop Reinforced Ti-MMC Rings by Spray/Wind Process, Key Engineering Materials, vol.127, issue.131, pp.127-131, 1997.
DOI : 10.4028/www.scientific.net/KEM.127-131.335

C. T. Lynch and J. P. Kershaw, Metal matrix composites, pp.15-27

S. G. Warrier and R. Y. Lin, Using rapid infrared forming to control interfaces in titanium-matrix composites, JOM, vol.5, issue.7, pp.24-27, 1993.
DOI : 10.1007/BF03222345

]. B. Toloui, « Development of carbon fibre reinforced titanium-copper composites, pp.773-777, 1985.

S. G. Warrier, C. A. Blue, and R. Y. Lin, Infiltration of titanium alloy-matrix composites, Journal of Materials Science Letters, vol.136, issue.138, pp.865-868, 1993.
DOI : 10.1007/BF00278000

S. G. Warrier and R. Y. Lin, « Rapid infrared forming of titanium/SCS fiber composites, Proceedings of EPD Congress, pp.643-653, 1993.

S. G. Warrier and R. Y. Lin, Effect of heat treatment on the flexural properties of a titanium matrix composite, Scripta Metallurgica et Materialia, pp.1015-1020, 1992.
DOI : 10.1016/0956-716X(92)90466-R

R. Y. Lin and S. G. Warrier, « Interface control in metal matrix composite fabrication, Control of Interfaces in Metal and Ceramic Composites, pp.33-49, 1993.

S. G. Warrier and R. Y. Lin, Infrared infiltration and properties of SCS-6/Ti alloy composites, Journal of Materials Science, vol.3, issue.7, pp.1821-1828, 1996.
DOI : 10.1007/BF00372197

]. P. Wanjara, S. Yue, R. A. Drew, J. Root, and R. Donaberger, Titanium-Based Composites Produced by Powder Metallurgy, Key Engineering Materials, vol.127, issue.131, pp.127-131, 1997.
DOI : 10.4028/www.scientific.net/KEM.127-131.415

]. P. Wanjara, R. A. Drew, and S. Yue, « Characterization of Ti-6%Al-4%V/TiC metal matrix composites consolidated by powder metallurgy processing, Proceedings of Titanium 95, pp.2771-2778, 1995.

G. Das and F. H. Froes, « Fundamental studies of titanium-based metal matrix composites, Proceedings of Sixth World Conference on Titanium, pp.907-912, 1988.

]. S. Krishnamurthy, Y. Kim, G. Das, and F. H. Froes, « Applications of RS/PM to the processing of metal matrix composites, Metal and Ceramic Matrix Composites : Processing, Modeling and Mechanical Behavior, pp.145-155, 1990.

S. T. Mileiko, A. M. Rudnev, and M. V. Gelachov, « Low cost PM route for titanium matrix carbon fibre composites ». Powder metallurgy, pp.97-99, 1996.

L. V. Kovalenko, V. I. Antipov, and A. Yu, Afanas'ev and L.V. Vinogradov. « Interphase interaction in production of the titanium-carbon fibre composite », Journal of Advanced Materials, vol.3, issue.3, pp.215-217, 1996.

R. Bibliographiques, . Bibliographiques-]-h, Y. Kametani, and . Kurihara, « Development studies of the spray-reduction process for production of titanium powder, Proceedings of Titanium 95, pp.2602-2609, 1995.

]. R. Suzuki, M. Ogawa, T. Oishi, and K. Ono, « Preparation of Ti powders by the calcium vapor reduction of TiO 2 and the electron-beam melting, Proceedings of Sixth World Conference on Titanium, pp.701-706, 1988.

]. X. Li, K. Ohsaki, Y. Morita, and M. Uda, Preparation of fine Nb3Al powder by hydriding and dehydriding of bulk material, Journal of Alloys and Compounds, vol.227, issue.2, pp.141-144, 1995.
DOI : 10.1016/0925-8388(95)01576-0

]. X. Li, A. Chiba, and S. Takahashi, Disintegration and fine powder preparation of Nb75Si25 via hydrogenation, Journal of Alloys and Compounds, vol.260, issue.1-2, pp.153-156, 1997.
DOI : 10.1016/S0925-8388(97)00171-0

]. E. Gaffet and O. Tillement, « Mécanochimie et activation mécanique, Les Annales Chimiques de Science des Matériaux, pp.417-422, 1997.

J. Bobet, E. Akiba, and B. Darriet, Effect of substitution of Fe and Ni for Co in the synthesis of Mg2Co compound using the mechanical alloying method, Journal of Alloys and Compounds, vol.297, issue.1-2, pp.192-198, 2000.
DOI : 10.1016/S0925-8388(99)00552-6

]. J. Chen, S. X. Dou, and H. K. Liu, Crystalline Mg2Ni obtained by mechanical alloying, Crystalline MG 2 Ni obtained by mechanical alloying, pp.184-189, 1996.
DOI : 10.1016/S0925-8388(96)02426-7

]. Bobet, C. Even, Y. Nakamura, E. Akiba, and B. Darriet, Synthesis of magnesium and titanium hydride via reactive mechanical alloying, Journal of Alloys and Compounds, vol.298, issue.1-2, pp.279-284, 2000.
DOI : 10.1016/S0925-8388(99)00628-3

]. G. Liang, S. Boily, J. Huot, A. Van-neste, and R. Schultz, Mechanical alloying and hydrogen absorption properties of the Mg???Ni system, Mechanical alloying and hydrogen absorption properties of the Mg-Ni system, pp.302-306, 1998.
DOI : 10.1016/S0925-8388(97)00533-1

]. K. Aoki, H. Aoyagi, A. Memezawa, and T. Masumoto, Effect of ball milling on the hydrogen absorption rate of FeTi and Mg2Ni compounds, Journal of Alloys and Compounds, vol.203, issue.2, pp.7-9, 1994.
DOI : 10.1016/0925-8388(94)90704-8

W. H. Kao and L. Orsborn, « Consolidation characteristics of rotating electrode and hydride titanium powdersPowder Metallurgy of Titanium Alloys, pp.163-174, 1980.

]. W. Hohmann, « Powder metallurgy production of high density titanium materials, Powder Metallurgy International, vol.6, issue.2, pp.66-72, 1974.

]. F. Froes, D. Eylon, G. Wirth, K. Grundhoff, and W. Smarsly, « Fatigue properties of hot isostatically pressed Ti-6Al-4V powders, Progress in powder metallurgy 38, pp.503-519, 1982.

P. R. Smith, S. W. Eylon, F. H. Schwenker, and . Froes, « Effect of heat-treatment on the fatigue behavior of PM titanium compactsAdvanced Processing Methods for Titanium, pp.61-77, 1982.

]. V. Linse, « Explosive compaction of titanium and titanium alloy powdersTitanium, Rapid Solidification Technology, pp.301-310, 1986.

]. D. Eylon and F. H. Froes, « HIP compaction of titanium alloy powders at high pressure and low temperature (HPLT), Metal Powder Report, vol.41, issue.64, pp.287-293, 1986.

]. D. Eylon and F. H. Froes, « Microstructure refinement and property enhancement of titanium powder compacts by high pressure and low temperature processing, Proceedings of Sixth World Conference on Titanium, pp.1173-1178, 1988.

Y. R. Mahajan, D. Eylon, C. A. Kelto, and F. H. Froes, « Evaluation of Ti-10V-2Fe- 3Al powder compacts produced by the ROC method, Progress in Powder Metallurgy, pp.163-171, 1986.

Y. R. Mahajan, D. Eylon, C. A. Kelto, T. Egerer, and F. H. Froes, « Modification of titanium powder metallurgy alloy microstructure by strain energizing and rapid omni-directional compaction ». Titanium, Science and Technology, vol.1, pp.339-346, 1985.

C. A. Kelto, « Rapid omnidirectional compaction ». Metals Handbook, Ninth Edition, Powder Metallurgy, vol.7, pp.542-546, 1984.

]. D. Eylon, C. A. Kelton, A. F. Hayes, and F. H. Froes, « Low temperature compaction of titanium alloys by rapid omnidirectional compaction (ROC) ». Progress in Powder Metallurgy, pp.33-47, 1987.

]. D. Raybould, « Cold dynamic compaction of pre-alloyed titanium and activated sintering, Progress in Powder Metallurgy, pp.575-589, 1983.

C. A. Kelto, B. A. Kosmal, D. Eylon, and F. H. Froes, « Titanium powder metallurgy -A perpectivePowder Metallurgy of Titanium Alloys, pp.1-19, 1980.

. G. Gestion-de-la-]-s, C. A. Warrier, R. Y. Blue, and . Lin, « Infiltration of titanium alloy-matrix composites », Journal of Materials Science Letters, vol.12, issue.1, pp.865-868, 1993.

]. S. Ochai, Mechanical Properties of Metallic Composites, 1994.

E. G. Kendall, « Development of metal-matrix composites reinforced with highmodulus graphite fibers, Composite Materials -Metallic Matrix Composites, pp.319-397, 1974.

]. R. Signorelli, « Wire-reinforced superalloys », Composite Materials -Metallic Matrix Composites, issue.4, pp.229-267, 1974.

]. F. Wagner, E. J. Bucur, and M. A. Steinberg, « The rate of diffusion of carbon in alpha and beta titanium ». Transactions of American Society for Metals, pp.742-761, 1956.

G. V. Samsonov and A. P. Epik, « Parameters of the reaction diffusion of boron and carbon in refractory transition metals », Fizika Metallov-i-Metallovedenie, vol.14, issue.3, pp.479-480, 1962.

L. M. Adelsberg and L. H. Cadoff, « The reactions of liquid titanium and hafnium with carbon ». Transactions of the Metallurgical Society of AIME, pp.933-935, 1967.

B. F. Ushakov, V. N. Zagryazkin, and A. S. Panov, « Reactions of graphite with titanium and zirconium ». Translated from Izvestiâ Akademii Nauk SSSR, Neorganicheskie Materialy, vol.8, issue.11, pp.1921-1925, 1972.

F. J. Loo and G. F. Bastin, On the diffusion of carbon in titanium carbide, Metallurgical Transactions A, vol.7, issue.3, pp.403-411, 1989.
DOI : 10.1007/BF02653919

D. L. Kohlstedt, W. S. Williams, and J. B. Woodhouse, Chemical Diffusion in Titanium Carbide Crystals, Chemical diffusion in titanium carbide crystals, pp.4476-4484, 1970.
DOI : 10.1063/1.1658485

]. C. Quinn and D. L. Kohlstedt, Solid-State Reaction Between Titanium Carbide and Titanium Metal, Journal of the American Ceramic Society, vol.7, issue.2, pp.305-310, 1984.
DOI : 10.1111/j.1151-2916.1967.tb15055.x

S. G. Warrier and R. Y. Lin, « Physical chemistry of interfacial reactions during the fabrication of titanium matrix composites, pp.720-727, 1993.

L. V. Kovalenko, V. I. Antipov, and A. Yu, Afanas'ev and L.V. Vinogradov. « Interphase interaction in production of the titanium-carbon fibre composite », Journal of Advanced Materials, vol.3, issue.3, pp.215-217, 1996.

S. Krishnamurthy and D. B. Miracle, « On the role of carbon diffusion during fiber/matrix reaction in SiC fiber reinforced Ti-based MMCS ». ICCM 11, III, pp.399-408, 1997.

]. J. Bouix, M. P. Berthet, F. Bosselet, R. Favre, M. Peronnet et al., Interface Tailoring in Carbon Fibres Reinforced Metal Matrix Composites, Le Journal de Physique IV, vol.07, issue.C6, pp.191-205, 1997.
DOI : 10.1051/jp4:1997616
URL : https://hal.archives-ouvertes.fr/jpa-00255715