J. F. Archard, Contact and Rubbing of Flat Surfaces, Journal of Applied Physics, vol.24, issue.8, pp.981-988, 1953.
DOI : 10.1063/1.1721448

M. Barquins, Adhérence, frottement et usure des élastomères, Industrie Minérale, pp.148-168, 1989.

A. K. Bhowmick, Ridge Formation during the Abrasion of Elastomers, Rubber Chemistry and Technology, vol.55, issue.4, pp.1055-1062, 1982.
DOI : 10.5254/1.3535913

A. K. Bhowmick, S. Basu, and S. K. De, Scanning electron microscopy studies of abraded rubber surfaces, Journal of Materials Science, vol.18, issue.6, pp.1654-1660, 1981.
DOI : 10.1007/BF02396884

B. Briscoe, Wear of polymers: an essay on fundamental aspects, Tribology International, vol.14, issue.4, pp.231-243, 1981.
DOI : 10.1016/0301-679X(81)90050-5

D. Bulgin and G. Hubbard, Rotary Power Loss Machine, Rubber Chemistry and Technology, vol.32, issue.3, pp.201-227, 1958.
DOI : 10.5254/1.3542459

D. H. Champ, E. Southern, and A. G. Thomas, Advances in polymer friction and wear, 1974.

A. Cornet and J. Deville, Physique et ingénierie des surfaces, EDP Sciences, 1998.

K. Dang-van, S. Fouvry, P. Kapsa, and H. Maitournam, Contacts entre solides : Aspects mécaniques, fatigue, endommagement, Cours pour l'Institut pour la Promotion des Sciences de l'Ingénieur, 1998.

C. Deutsch, Dynamique des véhicules routiers, Organisme National de Sécurité Routière, 1975.

M. Dragon-louiset, Contribution à une approche théorique de la mécanique de l'usure, 2000.

S. Fouvry, Etude quantitative des dégradations en fretting, pp.97-101, 1997.

A. N. Gent, A Hypothetical Mechanism for Rubber Abrasion, Rubber Chemistry and Technology, vol.62, issue.4, pp.750-756, 1989.
DOI : 10.5254/1.3536272

A. N. Gent, Cavitation in Rubber: A Cautionary Tale, Rubber Chemistry and Technology, vol.63, issue.3, pp.49-53, 1990.
DOI : 10.5254/1.3538266

A. N. Gent and C. T. Pulford, Mechanisms of rubber abrasion, Journal of Applied Polymer Science, vol.28, issue.3, pp.943-960, 1983.
DOI : 10.1002/app.1983.070280304

A. N. Gent and C. T. Pulford, Micromechanics of fracture in elastomers, Journal of Materials Science, vol.19, issue.11, pp.3612-3619, 1984.
DOI : 10.1007/BF02396933

J. Georges, Frottement, usure et lubrification, Editions Eyrolles / CNRS Editions, 2000.

K. A. Grosch, The Relation between the Friction and Visco-Elastic Properties of Rubber, Proc. R. Soc. Lond., A332, pp.21-39, 1971.
DOI : 10.1098/rspa.1963.0112

K. A. Grosch and A. Schallamach, Relation between Abrasion and Strength of Rubber, Rubber Chemistry and Technology, vol.39, issue.2, pp.287-305, 1966.
DOI : 10.5254/1.3544841

K. A. Grosch and A. Schallamach, The load dependence of laboratory abrasion and tyre wear, Kautschuk und Gummi, vol.22, issue.6, pp.288-292, 1969.

Y. H. Guo and J. Padovan, Moving template analysis of crack growth???II. Multiple crack extension and benchmarking, Engineering Fracture Mechanics, vol.48, issue.3, pp.427-444, 1993.
DOI : 10.1016/0013-7944(94)90132-5

G. M. Hamilton, Explicit Equations for the Stresses beneath a Sliding Spherical Contact, Proc. Instn
DOI : 10.1243/PIME_PROC_1983_197_076_02

G. Heinrich, Hysteresis Friction of Sliding Rubbers on Rough and Fractal Surfaces, Rubber Chemistry and Technology, vol.70, issue.1, pp.1-14, 1996.
DOI : 10.5254/1.3538415

T. Iwai and Y. Uchiyama, Variations of rubber friction in the course of pattern abrasions - Relationships between ridge deformations and frictional force, 2000.

K. L. Johnson, Contact mechanics, 1994.

Y. S. Kim, H. S. Byun, S. Kim, and A. N. Gent, Abrasion of selected rubber compounds with a DIN abrader, Korea Polymer Journal, vol.7, issue.2, pp.116-123, 1999.

I. V. Kragel-'skii and E. F. Nepomnyashchii, Fatigue wear under elastic contact conditions, Wear, vol.8, pp.303-319, 1965.

O. , L. Maître, M. Süssner, and C. Zarak, Evaluation of tire wear performance", Developments in tire, wheel, steering, and suspension technology (SP-1338), The Engineering Society for Advancing Mobility Land Sea Air and Space International, 1998.

. Leeds-lyon, The third body concept : interpretation of tribological phenomena, 1995.

B. D. Mindlin and H. Deresiewicz, Elastic Spheres in Contact Under Varying Oblique Forces, Journal of Applied Mechanics, pp.327-344, 1953.
DOI : 10.1007/978-1-4613-8865-4_35

D. F. Moore and G. B. , The friction and lubrication of elastomers, 1972.

R. Mouginot, Crack formation beneath sliding spherical punches, Journal of Materials Science, vol.39, issue.1, pp.989-1000, 1987.
DOI : 10.1007/BF01103541

R. Mouginot and D. Maugis, Fracture indentation beneath flat and spherical punches, Journal of Materials Science, vol.64, issue.12, pp.4354-4376, 1985.
DOI : 10.1007/BF00559324

J. Padovan and Y. H. Guo, Moving template analysis of crack growth???I. Procedure development, Engineering Fracture Mechanics, vol.48, issue.3, pp.405-425, 1994.
DOI : 10.1016/0013-7944(94)90131-7

B. N. Persson and E. Tosatti, Qualitative theory of rubber friction and wear, The Journal of Chemical Physics, vol.112, issue.4, pp.2021-2029, 2000.
DOI : 10.1063/1.480762

R. Pradeilles-duval, Evolution de systèmes avec surfaces de discontinuités mobiles : Application au délaminage, Ecole Polytechnique, vol.279, 1992.

C. T. Pulford, Failure of Rubber by Abrasion, Rubber Chemistry and Technology, vol.58, issue.3, pp.653-661, 1984.
DOI : 10.5254/1.3536083

E. Rabinowicz, Friction and Wear of Materials, Journal of Applied Mechanics, vol.33, issue.2, 1966.
DOI : 10.1115/1.3625110

E. Rabinowicz, Friction, Wear and Lubrication, Massachusetts Institute of Technology, 1974.

R. Ramakrihnan and J. A. Donovan, The Effect of Abrading Surfaces on the Wear of Rubber Tread Compounds, Rubber Chemistry and Technology, vol.68, issue.4, pp.609-622, 1995.
DOI : 10.5254/1.3538762

M. Razzaghi-kashani and J. Padovan, Simulation of Surface Flaw Propagation Associated with the Mechanical Fatigue Wear of Elastomers, Rubber Chemistry and Technology, vol.71, issue.2, pp.214-233, 1998.
DOI : 10.5254/1.3538480

M. M. Reznikovskii and G. I. Brodskii, Abrasion of rubber, 1967.

A. D. Roberts, Rubber adhesion at high rolling speeds, J. nat. Rubb. Res, vol.3, issue.4, pp.239-260, 1988.

P. Roch, Rubber tribology and tyre traction, 2001.

A. Schallamach, Abrasion of rubber by a needle, Journal of Polymer Science, vol.9, issue.5, pp.385-404, 1952.
DOI : 10.1002/pol.1952.120090501

A. Schallamach, Abrasion Pattern on Rubber, Rubber Chemistry and Technology, vol.26, issue.1, 1952.
DOI : 10.5254/1.3539800

A. Schallamach, On the abrasion of rubber, Proc. Phys. Soc., 67B, pp.883-891, 1954.

A. Schallamach, Friction and abrasion of rubber, Wear, issue.1, pp.384-416, 1957.

A. Schallamach, Abrasion of rubber. II, pp.63-67, 1978.

G. W. Stachowiak and A. W. Batchelor, Engineering tribology, Tribology International, vol.27, issue.5, 2001.
DOI : 10.1016/0301-679X(94)90034-5

T. A. Stolarski, A probalistic approach to wear prediction, J Phys. D. : Appl. Phys, vol.24, pp.1143-1149, 1990.

N. P. Suh, The delamination theory of wear, Wear, vol.25, issue.1, pp.111-124, 1973.
DOI : 10.1016/0043-1648(73)90125-7

P. Thirion, Le frottement du caoutchouc et la glissante des pneumatiques d'automobiles et d'avions, Institut Français du Caoutchouc, 1973.

P. Thirion and R. Chasset, Le frottement du caoutchouc, Institut Français du Caoutchouc, 1964.

A. G. Thomas, Rupture of rubber. II. The strain concentration at an incision, Journal of Polymer Science, vol.18, issue.88, pp.177-188, 1955.
DOI : 10.1002/pol.1955.120188802

A. G. Thomas, Factors Influencing the Strength of Rubbers, Rubber Chemistry and Technology, vol.48, issue.5, pp.902-912, 1975.
DOI : 10.5254/1.3539696

G. M. Hamilton, Explicit Equations for the Stresses beneath a Sliding Spherical Contact, Proc. Instn
DOI : 10.1243/PIME_PROC_1983_197_076_02

T. Iwai and Y. Uchiyama, Variations of rubber friction in the course of pattern abrasions - Relationships between ridge deformations and frictional force, 2000.

K. L. Johnson, Contact mechanics, 1994.

K. Kendall, Agglomerate strength, Powder Metallurgy, issue.1, pp.31-59, 1988.

K. Kendall, N. M. Alford, W. J. Clegg, and J. D. Birchall, Flocculation clustering and weakness of ceramics, Nature, vol.339, issue.6220, pp.339-130, 1989.
DOI : 10.1038/339130a0

J. Leblanc, A molecular explanation for the origin of bound rubber in carbon black filled rubber compounds, Journal of Applied Polymer Science, vol.66, issue.12, pp.2257-2268, 1997.
DOI : 10.1002/(SICI)1097-4628(19971219)66:12<2257::AID-APP7>3.0.CO;2-F

J. Leblanc, Rubber???filler interactions and rheological properties in filled compounds, Progress in Polymer Science, vol.27, issue.4
DOI : 10.1016/S0079-6700(01)00040-5

D. R. Lide, Handbook of Chemistry and Physics, C.R, 1992.

J. Loubet, J. M. Georges, O. Marchesini, and G. Meille, Vickers Indentation Curves of Magnesium Oxide (MgO), Journal of Tribology, vol.106, issue.1, pp.43-48, 1984.
DOI : 10.1115/1.3260865

J. E. Mark, Physical properties of polymers handbook, 1996.
DOI : 10.1007/978-0-387-69002-5

G. Martin-borret, Sur la propagation de fissures dans les élastomères, 1998.

D. Maugis, Contact, adhesion and rupture of elastic solids, 1999.
DOI : 10.1007/978-3-662-04125-3

E. Mc-ewen, XLI. Stresses in elastic cylinders in contact along a generatrix (including the effect of tangential friction), The London, Edinburgh, and Dublin Philosophical Magazine and Journal of Science, vol.92, issue.303, pp.454-459, 1949.
DOI : 10.1243/PIME_PROC_1948_158_036_02

A. I. Medalia, Effect of Carbon Black on Ultimate Properties of Rubber Vulcanizates, Rubber Chemistry and Technology, vol.60, issue.1, pp.45-61, 1986.
DOI : 10.5254/1.3536121

D. J. Meier, Molecular basis of transition and relaxations, 1978.

P. Meijers, The contact problem of a rigid cylinder on an elastic layer, Applied Scientific Research, vol.59, issue.1, p.353, 1968.
DOI : 10.1007/BF00382359

K. Mitsuhashi, Test method and equipment for abrasion and friction of rubber, International Polymer Science and Technology, vol.16, issue.2, pp.31-48, 1989.

D. F. Moore and G. B. , The friction and lubrication of elastomers, 1972.

L. Mullins, Effet of stretching on the properties of rubber, Jounal of Rubber Research, vol.16, pp.275-289, 1947.

L. Mullins, Softening of Rubber by Deformation, Rubber Chemistry and Technology, vol.42, issue.1, pp.339-362, 1969.
DOI : 10.5254/1.3539210

N. Mullins and . Tobin, Theoretical Model for the Elastic Behavior of Filler-Reinforced Vulcanized Rubbers, Rubber Chemistry and Technology, vol.30, issue.2, pp.551-571, 1957.
DOI : 10.5254/1.3542705

L. Odoni-mécanique, Propriétés mécaniques et effets d'échelle, 1998.

A. R. Payne, The dynamic properties of carbon black-loaded natural rubber vulcanizates. Part I, Journal of Applied Polymer Science, vol.6, issue.19, pp.57-63, 1962.
DOI : 10.1002/app.1962.070061906

A. R. Payne, A note on the existence of a yield point in the dynamic modulus of loaded vulcanizates, Journal of Applied Polymer Science, vol.3, issue.7, p.127, 1965.
DOI : 10.1002/app.1960.070030721

B. N. Persson and E. Tosatti, Qualitative theory of rubber friction and wear, The Journal of Chemical Physics, vol.112, issue.4, pp.2021-2029, 2000.
DOI : 10.1063/1.480762

B. E. Read, Influence of stress state and temperature on secondary relaxations in polymeric glasses, Polymer, vol.22, issue.11, pp.1580-1586, 1981.
DOI : 10.1016/0032-3861(81)90335-9

A. D. Roberts, Rubber adhesion at high rolling speeds, J. nat. Rubb. Res, vol.3, issue.4, pp.239-260, 1988.

G. W. Stachowiak and A. W. Batchelor, Engineering tribologie, 1993.

K. J. Stout, P. J. Sullivan, W. P. Dong, E. Mainsah, N. Luo et al., The developpment of methods for the characterisation of roughness in 3 dimensions, 1993.

P. Thirion, Caractères spécifiques du frottement du caoutchouc sur les solides, 1973.

J. Trotignon, J. Verdu, A. Dobraczynski, and M. Piperaud, Matières plastiques : structurespropriétés , mise en oeuvre, normalisation, 1998.

M. Wang, Effect of Polymer-Filler and Filler-Filler Interactions on Dynamic Properties of Filled Vulcanizates, Rubber Chemistry and Technology, vol.71, issue.3, pp.520-589, 1997.
DOI : 10.5254/1.3538492

M. L. Williams, R. F. Landel, and J. F. Ferry, The Temperature Dependence of Relaxation Mechanisms in Amorphous Polymers and Other Glass-forming Liquids, Journal of the American Chemical Society, vol.77, issue.14, pp.3701-3707, 1955.
DOI : 10.1021/ja01619a008

D. La, T. De, and S. Et-de, ANALYSE, SOMMAIRE CHAPITRE, vol.3, p.71
URL : https://hal.archives-ouvertes.fr/hal-01492183

M. Barquins, P. Rougier, and R. Courtel, Sur les mécanismes d'usure du caoutchouc par frottement de glissement, C. R. Acad. Sc. Paris -Série B, vol.283, pp.355-357, 1976.

T. Baumberger, Contact dynamics and friction at a solid-solid interface: Material versus statistical aspects, Solid State Communications, vol.102, issue.2-3, pp.175-185, 1997.
DOI : 10.1016/S0038-1098(96)00710-7

Y. Fukahori and H. Yamazaki, Mechanism of rubber abrasion, Wear, vol.178, issue.1-2, pp.109-116, 1994.
DOI : 10.1016/0043-1648(94)90135-X

J. Georges, Frottement, usure et lubrification, Editions Eyrolles / CNRS Editions, 2000.

J. A. Greenwood and J. H. Tripp, The Elastic Contact of Rough Spheres, Journal of Applied Mechanics, vol.34, issue.1, pp.153-159, 1967.
DOI : 10.1115/1.3607616

J. A. Greenwood and J. B. Williamson, Contact of Nominally Flat Surfaces, Proc. R. Soc. Lond., A295, pp.300-318, 1966.
DOI : 10.1098/rspa.1966.0242

I. M. Hutchings-londres and G. B. , Tribology: friction and wear of engineering materials, Materials & Design, vol.13, issue.3, 1992.
DOI : 10.1016/0261-3069(92)90241-9

T. Iwai and Y. Uchiyama, Variations of rubber friction in the course of pattern abrasions - Relationships between ridge deformations and frictional force, 2000.

Y. Ju and L. Zheng, A full numerical solution for the elastic contact of three-dimensional real rough surfaces, Wear, vol.157, issue.1, pp.151-161, 1992.
DOI : 10.1016/0043-1648(92)90193-C

Y. S. Kim, H. S. Byun, S. Kim, and A. N. Gent, Abrasion of selected rubber compounds with a DIN abrader, Korea Polymer Journal, vol.7, issue.2, pp.116-123, 1999.

K. Komvopoulos and D. H. Choi, Elastic Finite Element Analysis of Multi-Asperity Contacts, Journal of Tribology, vol.114, issue.4, pp.823-831, 1992.
DOI : 10.1115/1.2920955

D. F. Moore and G. B. , The friction and lubrication of elastomers, 1972.

E. Rabinowicz, Friction and Wear of Materials, Journal of Applied Mechanics, vol.33, issue.2, 1966.
DOI : 10.1115/1.3625110

E. Rabinowicz, Friction, Wear and Lubrication, Massachusetts Institute of Technology, 1974.

H. M. Stanley and T. Kato, An FFT-Based Method for Rough Surface Contact, Journal of Tribology, vol.119, issue.3, pp.481-485, 1997.
DOI : 10.1115/1.2833523

Y. Uchiyama and Y. Ishino, Pattern abrasion mechanism of rubber, Wear, vol.158, issue.1-2, pp.141-155, 1992.
DOI : 10.1016/0043-1648(92)90035-7

G. Sur-le, 4 figurent les modules de cisaillement réels mesurés dans les différentes configurations. Les modules du mélange homogène testé à l

L. Valeur, légèrement inférieure donnée par l'indenteur TCC par rapport à l'indenteur Berkovich, peut s'expliquer par le

B. Bucaille, Simulation numérique de l'indentation et de la rayure des verres organiques, 2001.

K. L. Johnson, Contact mechanics, 1994.

L. Odoni-mécanique, Propriétés mécaniques et effets d'échelle, 1998.

E. Charge and N. , 126 2.3.1. Conditions expérimentales, p.127

M. B. Kautschuk and +. Gummi, Adhérence, frottement et usure des élastomères, pp.419-438, 1987.

G. M. Bartenev and A. I. El-'kin, Friction properties of high elastic materials, Wear, vol.8, issue.1, pp.8-21, 1965.
DOI : 10.1016/0043-1648(65)90246-2

B. Briscoe and D. Tabor, Friction and wear of polymers: The role of mechanical properties, British Polymer Journal, vol.6, issue.1, pp.74-78, 1978.
DOI : 10.1002/pi.4980100114

B. V. Derjaguin, The mechanism of boundary lubrication and the properties of the lubricating film, Wear, issue.1, pp.277-289, 1957.

A. N. Gent and S. Lai, Interfacial bonding, energy dissipation, and adhesion, Journal of Polymer Science Part B: Polymer Physics, vol.32, issue.8, pp.1543-1555, 1994.
DOI : 10.1002/polb.1994.090320826

J. Georges, Frottement, usure et lubrification, Editions Eyrolles / CNRS Editions, 2000.

O. Goncalves, Mesure de la dispersion des agglomérats dans un mélange, Ecole Supérieure des Industries du Caoutchouc et Manufacture Française des Pneumatiques Michelin, Stage DESS, 1999.

K. A. Grosch, The Relation between the Friction and Visco-Elastic Properties of Rubber, Proc. R. Soc. Lond., A332, pp.21-39, 1971.
DOI : 10.1098/rspa.1963.0112

K. A. Grosch and A. Schallamach, Relation between Abrasion and Strength of Rubber, Rubber Chemistry and Technology, vol.39, issue.2, pp.287-305, 1966.
DOI : 10.5254/1.3544841

V. Jardret, Apport des techniques sclérométriques à la caractérisation des propriétés mécaniques des surfaces, pp.96-105, 1996.

D. Mazuyer, La force de frottement limite, 1989.

D. F. Moore and G. B. , The friction and lubrication of elastomers, 1972.

A. Schallamach, The velocity and temperature dependance of rubber friction, Proc. R. Soc. Lond, pp.386-392, 1952.

J. F. Archard, Contact and Rubbing of Flat Surfaces, Journal of Applied Physics, vol.24, issue.8, pp.981-988, 1953.
DOI : 10.1063/1.1721448

M. B. Kautschuk and +. Gummi, Adhérence, frottement et usure des élastomères, pp.419-438, 1987.

M. Barquins, Adhérence, frottement et usure des élastomères, Industrie Minérale, pp.148-168, 1989.

M. Barquins, P. Rougier, and R. Courtel, Sur les mécanismes d'usure du caoutchouc par frottement de glissement, C. R. Acad. Sc. Paris -Série B, vol.283, pp.355-357, 1976.

G. M. Bartenev and A. I. El-'kin, Friction properties of high elastic materials, Wear, vol.8, issue.1, pp.8-21, 1965.
DOI : 10.1016/0043-1648(65)90246-2

P. Bertrand-lambotte, Sur les mécanimes de rayure des vernis de finition automobile, 2001.

A. K. Bhowmick, Ridge Formation during the Abrasion of Elastomers, Rubber Chemistry and Technology, vol.55, issue.4, pp.1055-1062, 1982.
DOI : 10.5254/1.3535913

A. K. Bhowmick, S. Basu, and S. K. De, Scanning electron microscopy studies of abraded rubber surfaces, Journal of Materials Science, vol.18, issue.6, pp.1654-1660, 1981.
DOI : 10.1007/BF02396884

L. Bokobza and O. Rapoport, Reinforcement of natural rubber, Journal of Applied Polymer Science, vol.42, issue.11, pp.2301-2316, 2001.
DOI : 10.1002/app.10858

B. Briscoe, Wear of polymers: an essay on fundamental aspects, Tribology International, vol.14, issue.4, pp.231-243, 1981.
DOI : 10.1016/0301-679X(81)90050-5

B. Briscoe and D. Tabor, Friction and wear of polymers: The role of mechanical properties, British Polymer Journal, vol.6, issue.1, pp.74-78, 1978.
DOI : 10.1002/pi.4980100114

J. Bucaille, Simulation numérique de l'indentation et de la rayure des verres organiques, 2001.

D. Bulgin and G. Hubbard, Rotary Power Loss Machine, Rubber Chemistry and Technology, vol.32, issue.3, pp.201-227, 1958.
DOI : 10.5254/1.3542459

J. J. Busfield, A. G. Thomas, and K. Yamaguchi, Effect of mechanical deformation on the electrical and physical properties of carbon black filled natural rubber, The international rubber conference, IOM Communications, 2001.

D. H. Champ, E. Southern, and A. G. Thomas, Advances in polymer friction and wear, 1974.

L. Chazeau, J. D. Brown, L. C. Yanyo, and S. S. Sternstein, Modulus recovery kinetics and other insights into the payne effect for filled elastomers, Polymer Composites, vol.70, issue.2, pp.202-222, 2000.
DOI : 10.1002/pc.10178
URL : https://hal.archives-ouvertes.fr/hal-00475306

Y. Chevalier, Hyper élasticité et visco élasticité non linéaire -Grandes déformations, Cours de l'ISMCM-CESTI, 1996.

A. Cornet and J. Deville, Physique et ingénierie des surfaces, EDP Sciences, 1998.

K. Dang-van, S. Fouvry, P. Kapsa, and H. Maitournam, Contacts entre solides : Aspects mécaniques, fatigue, endommagement, Cours pour l'Institut pour la Promotion des Sciences de l'Ingénieur, 1998.

J. Denape, Aspect thermique du frottement Cours de 3ème année "Endommagement en tribologie, 2000.
DOI : 10.1016/s1296-2139(00)01068-x

B. V. Derjaguin, The mechanism of boundary lubrication and the properties of the lubricating film, Wear, issue.1, pp.277-289, 1957.

C. Deutsch, Dynamique des véhicules routiers, Organisme National de Sécurité Routière, 1975.

W. P. Dong, P. J. Sullivan, and K. J. Stout, Comprehensive study of parameters for characterizing three-dimensional surface topography I: Some inherent properties of parameter variation, Wear, vol.159, issue.2, pp.159-161, 1992.
DOI : 10.1016/0043-1648(92)90299-N

M. Dragon-louiset, Contribution à une approche théorique de la mécanique de l'usure, 2000.

R. C. Drutowski, Contact Elasticity of Seal Elastomers, Journal of Lubrication Technology, vol.90, issue.2, pp.478-483, 1968.
DOI : 10.1115/1.3601583

S. Fouvry, Etude quantitative des dégradations en fretting, pp.97-101, 1997.

F. M. Fowkes, DETERMINATION OF INTERFACIAL TENSIONS, CONTACT ANGLES, AND DISPERSION FORCES IN SURFACES BY ASSUMING ADDITIVITY OF INTERMOLECULAR INTERACTIONS IN SURFACES, The Journal of Physical Chemistry, vol.66, issue.2, p.382, 1962.
DOI : 10.1021/j100808a524