D. Lynn, S. D. Gabbay, and . Senturia, Automatic generation of dynamic macromodels using quasistatic simulation with modal analysis, Tech. Dig. IEEE Solid ? State Sensor and Actuator Workshop, pp.197-200, 1988.

D. Stephen and . Senturia, Simulation and design of microsystems: a 10 years perspective, Sensors and actuators, vol.67, pp.1-7, 1998.

D. Stephen and . Senturia, CAD for microelectromechanical systems, th International Conference of Solid-State Sensors and Actuators, and Eurosensors IX. Digest of Technical Papers, pp.5-8, 1995.

B. Puers, E. Peeters, and E. Sansen, CAD tools in mechanical sensor design, Sensors and Actuators, vol.17, issue.3-4, pp.423-429, 1989.
DOI : 10.1016/0250-6874(89)80029-0

H. U. Schwarzenbach, J. G. Korvink, M. Roos, G. Sartoris, and E. Anderheggen, A micro electro mechanical CAD extension for SESES, Journal of Micromechanics and Microengineering, vol.3, issue.3, pp.191-200, 1993.
DOI : 10.1088/0960-1317/3/3/006

B. Folkmer, H. L. Offereins, H. Sandmaier, W. Lang, A. Seidl et al., A simulation tool for mechanical sensor design, Sensors and Actuators A: Physical, vol.32, issue.1-3, pp.521-524, 1992.
DOI : 10.1016/0924-4247(92)80037-4

K. W. Lee and K. D. Wise, SENSIM: A simulation program for solid state pressure sensors, IEEE Transactions on Electron Devices, pp.29-34, 1992.

S. D. Senturia, R. Harris, S. Kim, K. Nabors, M. Shulmann et al., A computer-aided design system for microelectromechanical systems (MEMCAD), Journal of Microelectromechanical Systems, vol.1, issue.1, pp.3-13, 1992.
DOI : 10.1109/84.128049

B. Folkmer and H. Sandmaier, Simulation tools for micro electro mechanical systems, Simulation and Design for Microsystems and Microstructures, 1995.

R. Zengerle, M. Richter, F. Brosinger, A. Richter, and H. Sandmaier, Performance simulation of microminiaturized membrane pumps, 7 th International Conference on Solid-State Sensors and Actuators, pp.106-109, 1993.

A. Harrie and C. Tilman, Equivalent circuit representation of electromechanical transducers: I. lumped-parameter systems (micromechanical), Journal of Micromechanics and Microengineering, vol.6, pp.157-176, 1995.

J. R. Gilbert, R. Legtenberg, and S. D. Senturia, 3D coupled electromechanics for MEMS: applications of CoSolve-EM, Proceedings. IEEE Micro Electro Mechanical Systems, pp.122-127, 1995.

T. Veijola, T. Ryhanen, H. , and J. Lahdenpera, Circuits simulation model gas damping in microstructures with non trivial geometry, th International Conference on Solid-State Sensors and Actuators, and Eurosensors IX, pp.36-39, 1995.

J. M. Karam, B. Courtois, and M. Bauge, High level CAD melds microsystems with foundries, Proceedings ED&TC European Design and Test Conference, pp.442-447, 1996.
DOI : 10.1109/EDTC.1996.494338
URL : https://hal.archives-ouvertes.fr/hal-00007931

J. M. Karam, B. Courtois, A. Poppe, K. Hofmann, M. Rencz et al., Applied design and analysis of microsystems, Proceedings ED&TC European Design and Test Conference, pp.528-532, 1996.
DOI : 10.1109/EDTC.1996.494351
URL : https://hal.archives-ouvertes.fr/hal-00007991

A. Schroth, T. Blochwitz, and G. Gerlach, Simulation of a complex sensor system using coupled simulation programs, Sensors and Actuators A: Physical, vol.54, issue.1-3, pp.632-635, 1996.
DOI : 10.1016/S0924-4247(97)80028-3

D. Jaeggi, J. Fink, A. Haberli, and H. Baltes, Overall System Analysis Of A Cmos Thermal Converter, Proceedings of the International Solid-State Sensors and Actuators Conference, TRANSDUCERS '95, pp.112-115, 1995.
DOI : 10.1109/SENSOR.1995.721757

K. Hofmann, M. Lang, J. M. Karam, M. Glesner, and B. Courtois, Generation of a behavioral model of an acceleration sensor from its finite-element-description, 1 st Europe-Asia Congress on Mechatronics, pp.64-69, 1996.

K. Richard, T. L. Sevilla, and M. C. Rodamaker, Predicting hysteric oscillations in over-temperature protection of a power IC using transient electrothermal circuit simulation, Proceedings of the 5 th International Symposium on Power Semiconductor Devices and ICs, pp.304-309, 1993.

J. Vaananen, Circuit theoretical approach to couple two-dimensional finite element models with external circuit equations, IEEE Transactions on Magnetics, vol.32, issue.2, pp.400-410, 1996.
DOI : 10.1109/20.486524

J. G. Rollins and J. J. Choma, Mixed-mode PISCES-SPICE coupled circuit and device solver, IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems, vol.7, issue.8, pp.862-867, 1988.
DOI : 10.1109/43.3217

M. Nagata, Limitations, Innovations, Challenges of Circuits and Devices into a Half Micrometer and Beyong, IEEE Journal of Solid-State Circuits, pp.27-465, 1992.

K. R. Laker and W. M. Sansen, Design of Analog Integrated Circuits and Systems, Mac Graw Hill, 1994.

H. P. Amann, P. Moeschler, F. Pellandini, A. Vachoux, C. Munk et al., High-level specification of behavioral hardware models with MODES, Proceeding of IEEE International Symposium on Circuits and Systems, pp.387-390, 1994.

K. Bult, Analog CMOS square-law circuits, 1988.

J. Rijimenants, J. B. Litisios, T. R. Schwarz, and M. G. Degrauwe, ILAC: an automated layout tool for analog CMOS circuits, IEEE Journal of Solid-State Circuits, vol.24, issue.2, pp.417-425, 1989.
DOI : 10.1109/4.18603

M. Kayal, S. Piguet, M. Declercq, and B. Hochet, SALIM: a layout generation tool for analog ICs, Proceedings of the IEEE 1988 Custom Integrated Circuits Conference, pp.751-754, 1988.
DOI : 10.1109/CICC.1988.20819

L. O. Donzelle, P. F. Dubois, B. Hennion, J. Parissis, and P. Senn, A constraint based approach to automatic design of analog cells, Proceedings of the 28th conference on ACM/IEEE design automation conference , DAC '91, pp.506-509, 1991.
DOI : 10.1145/127601.127722

J. M. Cohn, D. J. Garrod, R. A. Rutenbar, and L. R. Carley, Analog device-level Layout Automation, 1994.
DOI : 10.1007/978-1-4615-2756-5

M. Kayal, S. Piguet, M. Declercq, and B. Hochet, SALIM: a layout generation tool for analog ICs, Proceedings of the IEEE 1988 Custom Integrated Circuits Conference, 1988.
DOI : 10.1109/CICC.1988.20819

D. Stephen and . Senturia, CAD challenges for microsensors, microactuators and microsystems, Proceeding of IEEE, pp.1611-1626, 1998.

D. Stephen and . Senturia, Simulation and design of microsystems: a 10 years perspective, Sensors and actuators, vol.67, pp.1-7, 1998.

D. Stephen and . Senturia, CAD for microelectromechanical systems, th International Conference of Solid-State Sensors and Actuators, and Eurosensors IX. Digest of Technical Papers, pp.5-8, 1995.

B. Folkmer and H. Sandmaier, Simulation tools for micro electro mechanical systems, Simulation and Design for Microsystems and Microstructures, 1995.

A. Horn, H. Schröder, E. Obermeier, and G. Wachutka, Simulation of Orientation- Dependent Etching of Silicon Using a New Step Flow Model of 3D Structuring, Proc. of 3 rd International Conference on Modeling and Simulation of Microsystems, pp.63-66, 2000.

P. French, M. Nagao, and M. Esashi, Electrochemical etch-stop in TMAH without externally applied bias, Sensors and actuators A (56), pp.279-280, 1996.
DOI : 10.1016/S0924-4247(96)01331-3

T. J. Hubbard and E. K. Antonsson, Etch rate modeling in MEMS design, proceedings of the 1996 ASME design engineering technical conference and computer en engineering conference, 1996.

J. M. Paret, Étude et mise au point de la méthodologie de conception et de fabrication collective de microsystèmes sur silicium, 1997.

J. H. Smith, J. J. Montague, J. R. Sniegowski, R. P. Murray, P. J. Manginell et al., Characterization of the embedded micromechanical device approach to the monolithic integration of MEMS with CMOS, SPIE Micromachining and Microfabrication, 1996.
DOI : 10.2172/380312

W. Yun, R. Howe, and P. Gray, Surface micromachined, digitally force-balanced accelerometer with integrated CMOS detection circuitry, Proceeding of the IEEE Solid-State Sensor and Actuator Workshop, p.126, 1992.

Y. Yee, M. Park, W. Lee, S. Kim, and K. Chun, An integration process of micro electro mechanical polysilicon with CMOS analog/digital circuits, Sensors and Actuators A(78), pp.120-129, 1999.
DOI : 10.1016/S0924-4247(99)00234-4

Y. B. Gianchandani, H. Kim, M. Shinn, B. Ha, B. Lee et al., A MEMS-first fabrication process for integrating CMOS circuits with polysilicon microstructures, Proceedings MEMS 98. IEEE. Eleventh Annual International Workshop on Micro Electro Mechanical Systems. An Investigation of Micro Structures, Sensors, Actuators, Machines and Systems (Cat. No.98CH36176), 1998.
DOI : 10.1109/MEMSYS.1998.659764

J. H. Smith, J. J. Montague, and . Sniegowski, <title>Material and processing issues for the monolithic integration of microelectronics with surface-micromachined polysilicon sensors and actuators</title>, Micromachining and Microfabrication Process Technology, 1995.
DOI : 10.1117/12.221301

J. J. Sniegowski and M. P. De-boer, IC-Compatible Polysilicon Surface Micromachining, Annual Review of Materials Science, vol.30, issue.1, pp.299-333, 2000.
DOI : 10.1146/annurev.matsci.30.1.299

W. Ehrfeld, F. Götze, D. Münchmeyer, W. Schelb, and D. Schmidt, LIGA process: sensor construction techniques via X-ray lithography, IEEE Technical Digest on Solid-State Sensor and Actuator Workshop, pp.1-4, 1988.
DOI : 10.1109/SOLSEN.1988.26418

B. Charlot, Modélisation de fautes et conception en vue du test structurel des microsystèmes, Thèse de doctorat, INPG, 2001.

F. P. Preparata and S. J. Hong, Convex hulls of finite sets of points in two and three dimensions, Communications of the ACM, vol.20, issue.2, 1977.
DOI : 10.1145/359423.359430

C. A. Brebbia, J. C. Telles, and L. C. Wrobel, Boundary Element Techniques, 1984.
DOI : 10.1007/978-3-642-48860-3

M. Gyimesi and D. Ostergaard, Electro-Mechanical Transducer for MEMS in ANSYS, Proceeding 1999, International Conference on Modeling and Simulation of Microsystems, pp.19-21, 1999.

M. J. Fagan, Finite Element Analysis, Theory and Practice, Longman Scientific and Technical, 1992.

D. Osteegaard and M. Gyimesi, Finite element based reduced order modeling of micro electro mechanical systems (MEMS), Modeling and simulation of MEMS, 2000.

B. Romanowicz, M. Laudon, P. Renaud, H. P. Amman, A. Boegli et al., Modeling and simulation of electromechanical transducers in microsystems using an analog hardware description language, Proceedings European Design and Test Conference. ED & TC 97, pp.119-123, 1997.
DOI : 10.1109/EDTC.1997.582344

H. H. Woodson and J. R. Melcher, Electromechanical dynamics, vol. I, II and III, 1968.

F. Balarin, Hardware-Software Co-design for Embedded Systems, 1997.
DOI : 10.1007/978-1-4615-6127-9

K. Hinnes and G. Boriello, Dynamic communication models in embedded systems cosimulation, Design Automation Conference, DAC'97, pp.395-400, 1997.

L. Kriaa, W. Youssef, G. Nicolescu, S. Martinez, S. Levitan et al., SystemC-based cosimulation for global validation of MOEMS, 2002.
URL : https://hal.archives-ouvertes.fr/hal-00007830

P. L. Marrec, Cosimulation multiniveaux dans un flot de conception multilangage, Thèse de Doctorat, 2000.

G. Nicolescu, S. Martinez, L. Kriaa, W. Youssef, S. Yoo et al., Application of multi-domain and multi-language cosimulation to an optical MEM switch design, Proceedings of ASP-DAC/VLSI Design 2002. 7th Asia and South Pacific Design Automation Conference and 15h International Conference on VLSI Design, 2002.
DOI : 10.1109/ASPDAC.2002.994958
URL : https://hal.archives-ouvertes.fr/hal-00008008

S. D. Senturia, CAD challenges for microsensors, microactuators, and microsystems, Proceedings of the IEEE, pp.1611-1626, 1998.
DOI : 10.1109/5.704266

Z. Juneidi, K. Torki, G. Nicolescu, S. Martinez, B. Courtois et al., Global modeling and simulation of System-on-Chip embedding MEMS devices, ASICON 2001. 2001 4th International Conference on ASIC Proceedings (Cat. No.01TH8549), 2001.
DOI : 10.1109/ICASIC.2001.982651
URL : https://hal.archives-ouvertes.fr/hal-00007835

T. P. Kurzweg, S. P. Levitan, P. J. Marchand, J. A. Martinez, K. R. Prough et al., CAD for optical MEMS, Design Automation Conference, DAC'99, pp.879-884, 1999.

S. P. Levitan, T. P. Kurzweg, P. J. Marchand, M. A. Rempel, D. M. Chiarulli et al., Chatoyant: a computer-aided-design tool for free-space optoelectronic systems, Applied Optics, vol.37, issue.26, pp.6078-6092, 1998.
DOI : 10.1364/AO.37.006078

Z. Juneidi, K. Torki, B. Charlot, and B. Courtois, MEMS Synthesis and Optimization, Design, Test, Integration and packaging of MEMS/MOEMS, 2001.
URL : https://hal.archives-ouvertes.fr/hal-00007839

W. C. Tang, T. H. Nguyen, M. W. Judy, and R. T. Howe, Electrostatic-comb drive of lateral polysilicon resonators, Sensors and Actuators A: Physical, vol.21, issue.1-3, pp.328-331, 1990.
DOI : 10.1016/0924-4247(90)85065-C

T. Hirano, T. Furuhatha, K. T. Gabriel, and H. Fijita, Design, fabrication, and operation of submicron gap comb-drive microactuators, Journal of Microelectromechanical Systems, vol.1, issue.1, pp.52-61, 1992.
DOI : 10.1109/84.128056

W. C. Tang, M. G. Lim, and R. T. Howe, Electrostatically balanced comb drive for controlled levitation, IEEE 4th Technical Digest on Solid-State Sensor and Actuator Workshop, pp.23-27, 1990.
DOI : 10.1109/SOLSEN.1990.109812

C. Arcelli, A condition for digital points removal, Signal Processing, vol.1, issue.4, pp.283-285, 1979.
DOI : 10.1016/0165-1684(79)90031-8

C. Arcelli and G. Sanniti-di-baja, Shape Splitting using maximal neighborhood, pp.1106-1108, 1982.

R. Bellman, On the approximation of curves by line segments using dynamic programming, Communications of the ACM, vol.4, issue.6, p.284, 1964.
DOI : 10.1145/366573.366611

C. A. Berenstein and D. Lavine, On the number of digital straight line segments, IEEE Transactions on Pattern Analysis and Machine Intelligence, vol.10, issue.6, pp.880-887, 1988.
DOI : 10.1109/34.9109

A. Bogomolny, Digital geometry may not be discrete, CVGIP, vol.43, pp.205-220, 1988.

R. Brons, Linguistic Methods for the Description of a Straight Line on a Grid, Computer Graphics and Image Processing, vol.3, issue.1, pp.48-62, 1974.
DOI : 10.1016/0146-664X(74)90010-0

L. Dorst and W. M. Smeulders, Discrete Representation of Straight Lines, IEEE Transactions on Pattern Analysis and Machine Intelligence, vol.6, issue.4, pp.450-463, 1984.
DOI : 10.1109/TPAMI.1984.4767550

G. Bredholt and C. Merveille, SensoNor Foundry Process Design Handbook, SensoNor asa, 1999.

G. S. Taylor and J. K. Ousterhout, Magic's Incremental Design-Rule Checker, 21st Design Automation Conference Proceedings, p.11, 1984.
DOI : 10.1109/DAC.1984.1585790

A. R. Lanfri, PHLED45: An Enhanced Version of CEASAR Supporting 45° Geometries, Proc. 21 st Design Automation Conference, pp.34-35, 1984.

J. Edward and . Mcgrath, Design Integrity and Immunity Checking, Proc. 17th Design Automation Conference, p.263, 1980.

Z. Juneidi, K. Torki, and R. Hamza, Design Rules for Non Manhattan Shapes, SPIE Micromachining and Microfabrication, 2000.
URL : https://hal.archives-ouvertes.fr/hal-00081520

K. R. Laker and W. M. Sansen, Design of Analog Integrated Circuits and Systems, Mac Graw Hill, 1994.

J. M. Cohn, D. J. Garrod, R. A. Rutenbar, and L. R. Carley, Analog device-level Layout Automation, 1994.
DOI : 10.1007/978-1-4615-2756-5

E. K. Antonsson, Structured Design Methods for MEMS " , NSF sponsored workshop on Structured Design Methods for MEMS, 1995.

Z. Juneidi, K. Torki, B. Charlot, and B. Courtois, MEMS Synthesis and Optimization, Design, Test, Integration and packaging of MEMS/MOEMS, 2001.
URL : https://hal.archives-ouvertes.fr/hal-00007839

T. Mukherjee and G. K. Fedder, Structured Design Of Microelectromechanical Systems, Proceedings of the 34th Design Automation Conference (DAC '97), 1997.

G. K. Fedder, Structured design of integrated MEMS, Technical Digest. IEEE International MEMS 99 Conference. Twelfth IEEE International Conference on Micro Electro Mechanical Systems (Cat. No.99CH36291), pp.1-8, 1999.
DOI : 10.1109/MEMSYS.1999.746742

T. J. Wagner, Hierarchical Layout Verification, IEEE Design and Test, pp.31-37, 1985.

J. Bonnans, J. C. Gilbert, C. Lemarechal, and C. Sagastizabal, Optimisation numérique aspects théoriques et pratiques, 1997.

L. Polak, Optimization Algorithms and Consistent Approximations, 1997.

P. E. Gill, W. Murray, and M. H. Wright, Practical Optimization, ACADEMIC PRESS, 1999.

Z. Juneidi, K. Torki, and R. Hamza, Design Rules for Non Manhattan Shapes, SPIE Micromachining and Microfabrication, 2000.
URL : https://hal.archives-ouvertes.fr/hal-00081520

Z. Juneidi, K. Torki, B. Charlot, and B. Courtois, MEMS Synthesis and Optimization, Design, Test, Integration and packaging of MEMS/MOEMS, 2001.
URL : https://hal.archives-ouvertes.fr/hal-00007839