O. Tabata, R. Sahi, H. Funabashi, K. Shimaoka, and S. Sugiyama, Anisotropic etching of silicon in TMAH solutions, Sensors and actuators A, pp.51-57, 1992.
DOI : 10.1016/0924-4247(92)80139-T

K. E. Bean, Anisotrophic Etching of Silicon, In IEEE Trans. Electron Devices, pp.251185-1192, 1978.

N. Kaou, J. C. Jeannot, and M. De-labachelerie, New method for reduction of corner undercutting in anisotropic etching, and applications to MEMS and MOEMS, DTM99, symposium on design test and microfabrication of MEMS/MOEMS, pp.1091-1098, 1999.

D. Veychard, Conception et réalisation d'un convertisseur électro-thermique à grande constante de temps en technologie microsystème pour un disjoncteur thermique, Thèse de doctorat, INPG, 1999.

A. Horn, H. Schröder, E. Obermeier, and G. Wachutka, Simulation of Orientation-Dependent Etching of Silicon Using a New Step Flow Model of 3D Structuring, Proc. of 3rd Int. Conf. on Modeling and Simulation of Microsystems, pp.63-66, 2000.

P. French, M. Nagao, and M. Esashi, Electrochemical etch-stop in TMAH without externally applied bias, Sensors and actuators A, pp.279-280, 1996.
DOI : 10.1016/S0924-4247(96)01331-3

T. J. Hubbard and E. K. Antonsson, Etch rate modeling in MEMS design, proceedings of the 1996 ASME design engineering technical conference and computer en engineering conference, 1996.

J. M. Paret, Étude et mise au point de la méthodologie de conception et de fabrication collective de microsystèmes sur silicium, 1997.

J. H. Smith, J. J. Montague, J. R. Sniegowski, R. P. Murray, P. J. Manginell et al., Characterization of the embedded micromechanical device approach to the monolithic integration of MEMS with CMOS, SPIE Micromachining and Microfabrication '96
DOI : 10.2172/380312

W. Yun, R. Howe, and P. Gray, Surface micromachined, digitally force-balanced accelerometer with integrated CMOS detection circuitry, Proc. of the IEEE Solid-State Sensor and Actuator Workshop, p.126, 1992.

Y. Yee, M. Park, W. Lee, S. Kim, and K. Chun, An integration process of micro electro mechanical polysilicon wih CMOS analog/digital circuits, Sensors and Actuators A(78), pp.120-129, 1999.

Y. B. Gianchandani, H. Kim, M. Shinn, B. Ha, B. Lee et al., A MEMS-first fabrication process for integrating CMOS circuits with polysilicon microstructures, Proceedings MEMS 98. IEEE. Eleventh Annual International Workshop on Micro Electro Mechanical Systems. An Investigation of Micro Structures, Sensors, Actuators, Machines and Systems (Cat. No.98CH36176), 1998.
DOI : 10.1109/MEMSYS.1998.659764

J. H. Smith, J. J. Montague, and . Sniegowski, <title>Material and processing issues for the monolithic integration of microelectronics with surface-micromachined polysilicon sensors and actuators</title>, Micromachining and Microfabrication Process Technology, 1995.
DOI : 10.1117/12.221301

J. J. Sniegowski and M. P. De-boer, IC-Compatible Polysilicon Surface Micromachining, Annual Review of Materials Science, vol.30, issue.1, pp.299-333, 2000.
DOI : 10.1146/annurev.matsci.30.1.299

W. Ehrfeld, F. Götze, D. Münchmeyer, W. Schelb, and D. Schmidt, LIGA process: sensor construction techniques via X-ray lithography, IEEE Technical Digest on Solid-State Sensor and Actuator Workshop, pp.1-4, 1988.
DOI : 10.1109/SOLSEN.1988.26418

D. Morrison, Sensors measure up to emerging automotive safety standards, Electronic design, pp.129-138, 2000.

T. Duhamel, D. Esteve, T. Cussac, and F. Pressecq, Applications des microsystèmes aux systèmes spatiaux, Colloque Européen "Capteurs pour l'Espace" (INNOCAP'97), pp.20-2117, 1997.

D. Esteve, J. Y. Fourniols, N. Lestrade, C. Mingues, C. Rossi et al., Nanosatellite in the microsystems world, International Conference on Integrated Nano/Microtechnology for Space Applications (NanoSpace 98), pp.1-6

W. H. Dobelle, Artificial Vision for the Blind by Connecting a Television Camera to the Visual Cortex, ASAIO Journal, vol.46, issue.1, pp.3-10, 2000.
DOI : 10.1097/00002480-200001000-00002

R. Catanescu and J. Binder, An implantable microsystem for biomedical applications, Micro System Technologies, pp.166-171, 1996.

S. J. Tangh and K. D. Wise, A 16-channel CMOS neural stimulating array, IEEE Journal of Solid-State Circuits, vol.27, issue.12, pp.1819-1825, 1992.
DOI : 10.1109/4.173111

D. M. Fraser-ed, Biosensors in the body, Biomaterial science and engineering series, 1997.

C. Rossi, D. Esteve, N. Fabre, T. Do-conto, V. Conedera et al., A new generation of MEMS based microthrusters for microspacecraft applications, Micro/Nanotechnology for Space Applications (MNT'99), pp.10-15201, 1999.

D. Lewis, S. Janson, R. Cohen, and E. Antonsson, Digital MicroPropulsion, Sensors and Actuators A, pp.143-154, 2000.
DOI : 10.1016/s0924-4247(99)00260-5
URL : http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.216.9090

R. Center-for-space-microelectronics-technology and . Ribas, Etude et conception de microsystèmes micro-usinés par la face avant en utilisant des technologies standards des circuits intégrés sur arséniure de gallium, Thèse de doctorat, 1998.

S. Martinez and B. Courtois, Study of Scalability for Micromachined Free-Space Optical Cross- Connects", To be published in Photonics Packaging and Integration III, 2001.

D. M. Burns and V. M. Bright, Micro-electro-mechanical Focusing Micromirrors, IEEE MEMS 98 Conference, 1998.
DOI : 10.1109/memsys.1998.659801

M. Huja, Micromirror array, 1998.

W. C. Tang, Electrostatic comb drive for resonant sensor and actuator applications, 1990.

W. C. Tang and T. C. Nguyen, Electrostatic-comb drive of lateral polysilicon resonators, Sensors and Actuators, A(21)-A(23), pp.328-331, 1990.
DOI : 10.1016/0924-4247(90)85065-C

W. C. Tang, Electrostatically balanced combdrive for controlled levitation, Solid- State Sensors and Actuators Workshop, 4 th technical Digest, pp.23-27, 1990.

B. Caillard, Etude, conception et réalisation d'une interface électronique hybride pour microrésonateur électro-mécanique, 2000.

C. T. Nguyen, Micromachining technologies for miniaturized communication devices, SPIE Conference on microelectronic structures and MEMS for optical process, 1998.

C. T. Nguyen, Microelectromechanical devices for wireless communications, Proceedings MEMS 98. IEEE. Eleventh Annual International Workshop on Micro Electro Mechanical Systems. An Investigation of Micro Structures, Sensors, Actuators, Machines and Systems (Cat. No.98CH36176), 1998.
DOI : 10.1109/MEMSYS.1998.659719
URL : http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.138.2339

C. T. Nguyen, Micromechanical resonators for oscillators and filters, 1995 IEEE Ultrasonics Symposium. Proceedings. An International Symposium, 1995.
DOI : 10.1109/ULTSYM.1995.495626

W. M. Miller, D. M. Tanner, S. L. Miller, and K. A. Peterson, MEMS Reliability: The Challenge and the PromiseThe Reliability Challenge, 4th Annual, pp.4-5, 1998.

D. M. Tanner, Reliability of surface micromachined MicroElectroMechanical actuators, 2000 22nd International Conference on Microelectronics. Proceedings (Cat. No.00TH8400), pp.97-104, 2000.
DOI : 10.1109/ICMEL.2000.840535

S. L. Miller, M. S. Rodgers, G. Lavigne, J. J. Sniegowski, P. Clews et al., Failure modes in surface micromachined microelectromechanical actuators, 1998 IEEE International Reliability Physics Symposium Proceedings 36th Annual (Cat No 98CH36173) RELPHY-98, pp.17-25, 1998.
DOI : 10.1109/RELPHY.1998.670437

K. A. Peterson, P. Tangyunyong, and A. A. Pimentel, Failure analysis of surface-micromachined microengines, Materials and Device Characterization in Micromachining, pp.190-200, 1998.
DOI : 10.1117/12.324056

S. L. Miller, G. Lavigne, M. S. Rodgers, J. J. Sniegowski, J. P. Waters et al., Routes to failure in rotating MEMS devices experiencing sliding friction, Micromachined Devices and Components III, pp.24-30, 1997.
DOI : 10.1117/12.284523

S. L. Miller, J. J. Sniegowski, G. Lavigne, and P. J. Mcwhorter, Friction in Surface Micromachined Microengines, Proc. SPIE Smart Electronics and MEMS, pp.28-29, 1996.

M. P. Deboer, M. R. Tabbara, M. T. Dugger, P. J. Clews, and T. A. Michalske, Measuring and Modeling Electrostatic Adhesion in Micromachines, Meeting, 1997.

M. P. Deboer, P. J. Clews, B. K. Smith, and T. A. Michalske, Adhesion of Polysilicon Microbeams in Controlled Humidity Ambients, Materials Research Society Proceedings Symposium on Microelectromechanical Structures for Materials Research, pp.131-136, 1998.

D. M. Tanner, J. A. Walraven, L. W. Irwin, M. T. Dugger, N. F. Smith et al., The effect of humidity on the reliability of a surface micromachined microengine, 1999 IEEE International Reliability Physics Symposium Proceedings. 37th Annual (Cat. No.99CH36296), pp.189-197, 1999.
DOI : 10.1109/RELPHY.1999.761611

M. P. Deboer, J. A. Knapp, T. M. Mayer, and T. A. Michalske, The Role of Interfacial Properties on MEMS Performance and Reliability, SPIE/EOS Conference on Microsystems Metrology and Inspection, 1999.

A. Christou, Integrating reliability into microelectronics manufacturing", In design and measurement in electronic engineering series, 1994.

A. Catillejo, Etude des mécanismes de défaillances des microsystèmes compatibles CMOS, 1997.

A. Castillejo, D. Veychard, S. Mir, J. M. Karam, and B. Courtois, Failure mechanisms and fault classes for CMOS-compatible microelectromechanical systems, Proceedings International Test Conference 1998 (IEEE Cat. No.98CH36270), pp.541-550, 1998.
DOI : 10.1109/TEST.1998.743197
URL : https://hal.archives-ouvertes.fr/hal-00005875

J. Melngailis, Focused ion beam technology and applications, Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures, vol.5, issue.2, 1987.
DOI : 10.1116/1.583937

J. Orloff, Les faisceau d'ions focalisés, In Pour la Science, vol.172, 1992.

B. Charlot, R. Cns, and . Dcf, Optimisation des procédures de gravure et de dépôt par faisceau d'ions focalisés, pp.95-50, 1995.

D. Veychard, Conception et réalisation d'un convertisseur électro-thermique à grande constante de temps en technologie microsystème pour un disjoncteur thermique, Thèse de doctorat, INPG, 1999.

N. Tayebi, Etude du phénomène de rupture des structures MEMS

N. Tayebi and A. K. Tayebi, Numerical fracture analysis of MEMS devices, Technical Proceedings 1999 International Conference on Modeling and Simulation of Microsystems MSM99, 1999.

C. H. Mastrangelo and C. H. Hsu, Mechanical stability and adhesion of microstructures under capillary forces. I. Basic theory, Journal of Microelectromechanical Systems, vol.2, issue.1, pp.33-43, 1993.
DOI : 10.1109/84.232593

C. H. Mastrangelo and C. H. Hsu, Mechanical stability and adhesion of microstructures under capillary forces. II. Experiments, Journal of Microelectromechanical Systems, vol.2, issue.1, pp.44-55, 1993.
DOI : 10.1109/84.232594

C. H. Mastrangelo, Adhesion-related failure mechanisms in micromechanical devices, Tribology Letters, vol.3, issue.3, pp.223-238, 1997.
DOI : 10.1023/A:1019133222401

C. J. Kim, J. Y. Kim, and B. Sridharan, Comparative evaluation of drying techniques for surface micromachining, Sensors and Actuators A(64), pp.17-26, 1998.
DOI : 10.1016/S0924-4247(98)80053-8

S. B. Brown, W. Vanarsdell, and C. L. Muhlstein, Materials reliability in MEMS devices, Proceedings of International Solid State Sensors and Actuators Conference (Transducers '97), pp.591-593
DOI : 10.1109/SENSOR.1997.613720

C. Muhlstein and S. Brown, Reliability and Fatigue Testing of MEMS Tribology Issues and Oppurtunities in MEMS, In Bhushan, 1998.

S. Brown, B. Gally, B. Grace, and R. H. Mukai, MEMS Raise Testing Issues From the Beginning to the End of the Design Cycle, Electronic Design, 2000.

S. Brown and C. Muhlstein, Survey of MEMS Failure Mechanisms, Proceedings of International Reliability Physics Symposium, IEEE 1998 Tutorial Notes, pp.4-5, 1998.

S. Brown, C. Muhlstein, and W. Van-arsdell, Materials reliability in MEMS devices, Proceedings of International Solid State Sensors and Actuators Conference (Transducers '97), 1997.
DOI : 10.1109/SENSOR.1997.613720

M. R. Douglass, Lifetime estimates and unique failure mechanisms of the Digital Micromirror Device (DMD), 1998 IEEE International Reliability Physics Symposium Proceedings 36th Annual (Cat No 98CH36173) RELPHY-98, pp.9-16, 1998.
DOI : 10.1109/RELPHY.1998.670436

B. Witvrouw, A. Bois, P. Verbist, C. De-moor, A. Van-hoof et al., <title>Comparison between wet HF etching and vapor HF etching for sacrificial oxide removal</title>, Micromachining and Microfabrication Process Technology VI, pp.17-20, 2000.
DOI : 10.1117/12.396423

A. K. Sharma and A. Terevosky, Evaluation of Thermo-Mechanical Stability of COTS Dual-Axis MEMS Accelerometers for Space Applications", NASA electronic part and packaging program

L. Michelutti, J. M. Terrot, A. Chovet, and A. Ionescu, 1/f noise in polycristalline silicon thin films versus technological parameters, proceedings of the 15th International Conference on Noise in physical systems and 1/f fluctuations ICNF, Hong Kong, pp.122-125, 1999.

L. Michelutti, N. Matthieu, A. Chovet, and A. Galerie, Influence of chemical corrosion on resistivity and 1/f noise of polysilicon gauges, Microelectronics reliability, pp.179-183, 2000.
DOI : 10.1016/S0026-2714(99)00215-2

S. Cruzel, D. Esteve, M. Dilhan, J. Y. Fourniols, O. Puig et al., Reliability of microsystems based on a failure mechanisms approach, SPIE International Symposium on MEMS Reliability for Critical and Space Applications, pp.21-22148, 1999.

J. and S. Perera, Reliability Modeling for Microelectromechanical Systems (MEMS) Using Neural Networks, The Third Annual International Conference on Integrated Nano/Microtechnology for Space Applications, 2000.

J. and S. Perera, Using neural network to predict reliability of microelectromechanical systems, Atlantic city NJ, 1999.

F. Hartley, Reliability Roadmap for Microstructures and Micromechanical Systems, Sensors Expo Fair, 1998.

S. L. Hurst, VLSI TESTING, digital and mixed analogue/digital techniques, The Institution of Electrical Engineers (IEE) publishing
DOI : 10.1049/PBCS009E

B. Courtois, Failure mechanisms, fault hypotheses and analytical testing of LSI-NMOS (HMOS) circuits, International Conference on Very Large Scale Integrated Systems VLSI'81, pp.341-350
URL : https://hal.archives-ouvertes.fr/hal-00013576

E. B. Eichelberger and T. W. Williams, A logic design structure for LSI testability, Papers on Twenty-five years of electronic design automation , 25 years of DAC, pp.462-468, 1977.
DOI : 10.1145/62882.62924

R. R. Fritzmeier, H. T. Nagle, and C. F. Hawkins, Fundamentals of testability-a tutorial, IEEE trans on industrial electronics, pp.117-128, 1999.
DOI : 10.1109/41.19061

E. J. Mccluskey, Built-In Self-Test Techniques, IEEE Design and Test, pp.21-28, 1985.
DOI : 10.1109/MDT.1985.294856

E. J. Mccluskey, Built-In Self-Test Structures, IEEE Design and Test, pp.29-36, 1985.
DOI : 10.1109/MDT.1985.294857

M. J. Ohletz, T. W. Williams, and J. P. Mucha, Overhead in Scan and Self-Testing Designs, proceedings of the IEEE International Test Conference, pp.460-470, 1987.

M. Nicolaidis and B. Courtois, Self-checking Circuits -A Tutorial, Fault Tolerant Systems and Diagnostics Conference, 1989.
URL : https://hal.archives-ouvertes.fr/hal-01410265

C. Dufaza, Theoretical properties of LFSRs for built-in self test, Integration, the VLSI Journal, vol.25, issue.1, pp.17-35, 1998.
DOI : 10.1016/S0167-9260(98)00005-4

C. Dufaza and G. Cambon, LFSR based deterministic and pseudo random test pattern generator structures, ETC'91, European Test Conference, pp.37-71, 1991.

J. M. Soden, C. F. Hawkins, R. K. Gulati, and W. Mao, Iddq testing : A review, JETTA, Journal of electronic testing : Theory and applications, pp.291-304, 1992.

A. Rubio, J. Figueras, D. Mateo, J. Segura, E. Janssens et al., A built-in quiescent current monitor for CMOS VLSI circuits, Proceedings the European Design and Test Conference. ED&TC 1995
DOI : 10.1109/EDTC.1995.470341

V. Visvanathan, Testing and Diagnosis of Analog Circuits and Systems, 1991.

I. Baturone, S. S. Solano, A. M. Richardson, and J. L. Huertas, Current-mode techniques for self-testing analogue circuits, Digest of Papers IEEE International Workshop on IDDQ Testing, pp.33-37, 1997.
DOI : 10.1109/IDDQ.1997.633010

E. J. Felt, Testing and Characterization of Analog Systems Using Behavioral Models and Optimal Experimental Design, 1996.

M. Renovell, G. Cambon, and D. Auvergne, FSPICE: a tool for fault modelling in MOS circuits, Integration, the VLSI Journal, vol.3, issue.3, pp.245-255, 1985.
DOI : 10.1016/0167-9260(85)90007-0

C. J. Richard-shi and N. J. Godambe, Behavioral fault modeling and simulation of phase locked loop using VHDL_A like languages, proceedings of the IEEE international ASIC conference and exhibit, 1997.

F. Mohamed, Approche à base de logique floue pour le test et le diagnostic des circuits analogiques, Thèse de doctorat, 1997.
URL : https://hal.archives-ouvertes.fr/tel-00010761

N. Milet-lewis, Contribution à la modélisation comportementale des circuits, Thèse de doctorat

B. Ayari, N. Benhamida, and B. Kaminska, Automatic test vector generation for mixed-signal circuits, Proceedings the European Design and Test Conference. ED&TC 1995, pp.458-463, 1995.
DOI : 10.1109/EDTC.1995.470320

N. Stessman, B. Vinnakota, and R. Harjani, System-level design for test of fully differential analog circuits, IEEE Journal of Solid-State Circuits, vol.31, issue.10, p.10, 1996.
DOI : 10.1109/4.540065

L. Millor and V. Visvanathan, Detection of catastrophic faults in analogue integrated circuit, IEEE transaction in computer aided design, pp.114-130, 1989.

M. Soma and V. Kolarik, A design-for-test technique for switched-capacitor filters, Proceedings of IEEE VLSI Test Symposium, pp.42-47, 1994.
DOI : 10.1109/VTEST.1994.292336

A. Khouas, Simulation de Fautes et Optimisation des Tests de Production pour les Circuits analogiques avec prise en compte des Tolérance, Thèse de l, 2000.

A. Khouas and A. Derieux, Analog fault detection based on statistical analysis, 6th IEEE International Mixed Signal Testing Workshop (IMSTW), pp.27-31, 2000.

S. Mir, M. Lubaszewski, and B. Courtois, Fault-based ATPG for linear analog circuits with minimal size multifrequency test sets, JETTA, Journal of electronic testing : Theory and applications, pp.43-57, 1996.
DOI : 10.1007/BF00137564
URL : https://hal.archives-ouvertes.fr/hal-00013266

S. Mir, M. Lubaszewski, V. Liberali, and B. Courtois, Built-in self-test approaches for analogue and mixed-signal integrated circuits, 38th Midwest Symposium on Circuits and Systems. Proceedings, pp.254-258, 1995.
DOI : 10.1109/MWSCAS.1995.510298
URL : https://hal.archives-ouvertes.fr/hal-00013276

G. W. Robert and A. K. Lu, Analog Signal Generation For Built-In Self-Test Of Mixed-Signal Integrated Circuits, 1994.
DOI : 10.1007/978-1-4615-2341-3

G. W. Roberts, Metrics, techniques and recent developments in mixed-signal testing, Proceedings of International Conference on Computer Aided Design, 1996.
DOI : 10.1109/ICCAD.1996.569904

A. Richarson, A. Lechner, and T. Olbrich, Design for testability strategies for mixed signal and analogue designs ? from layout to system, 5 th Proceedings of IEEE International conference on electroonics, circuits and systems, pp.425-427, 1998.

J. Velasco-medina, Techniques de BIST pour test analogique et mixte, Thèse de doctorat, INPG, 1 er Juillet, 1999.

C. Dufaza, Conception et test intégré des circuits numériques et analogiques", Habilitation à diriger des recherches, 1999.

Y. Zorian, E. J. Marinissen, and S. Rey, Testing embedded core based system chips, IEEE Computer, pp.52-60, 1999.

Y. Zorian and E. K. Marinissen, System chip test, Proceedings of the 37th conference on Design automation , DAC '00, 2000.
DOI : 10.1145/337292.337352

S. Sengupta, S. Kundu, S. Chakravarty, P. Parvathala, R. Galivanche et al., Defect-Based Test: A Key Enabler for Successful Migration to Structural Test, INTEL Technology Journal Q1'99

Y. Zorian, S. Rey, and M. J. Rodgers, Test of future system-on-chips, IEEE/ACM International Conference on Computer Aided Design. ICCAD, 2000. IEEE/ACM Digest of Technical Papers (Cat. No.00CH37140), pp.392-398, 2000.
DOI : 10.1109/ICCAD.2000.896504

M. J. Fagan, Finite element analysis, theory and practice

A. Kolpekwar and R. D. Blanton, Development of a MEMS testing methodology, Proceedings International Test Conference 1997, pp.923-931, 1997.
DOI : 10.1109/TEST.1997.639707

T. Olbrich, A. Richardson, B. Straube, and W. Vermeiren, Integrated test support for microelectro-mechanical-systems (MEMS), 5th International Conference on Micro-Electro-Opto- Mechanical Systems and Components, pp.273-279, 1996.

R. Rosing, A. Richardson, and A. P. Dorey, A fault simulation methodology for MEMS, Design Automation and Test in Europe, 2000.

R. Rosing and A. Richardson, Fault Simulation for MEMS", In IEE Colloquium on Intelligent and Self Validating Sensors, pp.7-8, 1999.

W. Vermeiren, B. Straube, and G. Elst, Microsystem fault simulation ? aspects and requirements, Microsystem Technologies, 1994.

W. Vermeiren, B. Straube, and A. Holubek, Defect-oriented experiments in fault modelling and fault simulation of microsystem components, Proceedings ED&TC European Design and Test Conference, pp.522-527, 1996.
DOI : 10.1109/EDTC.1996.494350

M. Lubaszewski, E. F. Cota, and B. Courtois, Microsystems testing: an approach and open problems, Proceedings Design, Automation and Test in Europe, pp.23-26, 1998.
DOI : 10.1109/DATE.1998.655908
URL : https://hal.archives-ouvertes.fr/hal-00007759

A. Kopelkwar and R. D. Blanton, Development of a MEMS testing methodology, IEEE International Test Conference, 1997.

A. Kolpekwar, T. Jiang, and R. D. Blanton, CARAMEL: Contamination And Reliability Analysis of MicroElectromechanical Layout, Journal of Microelectromechanical Systems, vol.8, issue.3, 1999.
DOI : 10.1109/84.788635

A. Kopelkwar, R. D. Blanton, and D. Woodvilla, Failure modes for stiction in surface micromachined MEMS, IEEE International Test Conference, 1998.

N. Deb and R. D. Blanton, High level fault modeling in surface micromachined MEMS, Symposium on design, test, integration and packaging of MEMS/MOEMS, pp.228-235, 2000.

D. Osteegaard and M. Gyimesi, Finite element based reduced order modeling of micro electro mechanical systems (MEMS), Modeling and simulation of MEMS, 2000.

B. Affour, P. Nachtergaele, S. Spirkovitch, D. Ostegaard, and M. Gyimesi, <title>Efficient reduced order modeling for system simulation of micro-electro-mechanical systems (MEMS) from FEM models</title>, Design, Test, Integration, and Packaging of MEMS/MOEMS, pp.9-11, 2000.
DOI : 10.1117/12.382297

F. Lémery, Modélisation comportementale des circuits analogiques et mixtes, Thèse de doctorat, INPG, 1995.

N. Zhou, J. V. Clark, and K. S. Pister, Nodal Analysis for MEMS Design Using SUGAR v0, Technical Proceedings 1998 International Conference on Modeling and Simulation of Microsystems, MSM 98, 1998.

K. Hofmann, J. M. Karam, B. Courtois, and M. Glesner, Generation of HDL-A code for nonlinear behavioral models, IEEE International Workshop on Behavioral Modeling and simulation, 1997.
URL : https://hal.archives-ouvertes.fr/hal-01388695

G. Wachutka, The Art of Modeling Coupled-Field Effects in Microdevices and Microsystems, Proc. of 2nd Int. Conf. on Modeling and Simulation of Microsystems, Semiconductors, Sensors and Actuators (MSM-99), pp.14-19, 1999.

G. Wachutka, Physical modeling and simulation of microdevices and microsystems, Design, Test, and Microfabrication of MEMS and MOEMS, pp.12-19, 1999.
DOI : 10.1117/12.341195

G. Wachutka, Modeling of Electrothermal Effects: Demands and Limitations, Electrostatic Discharge Association, pp.1-92, 1997.

L. Gabbay, Computer Aided Macromodeling for MEMS, 1998.

M. Varghese, V. L. Rabinovich, and S. D. Senturia, Reduced-Order Modeling of Lorentz Force Actuation with Modal Basis, Technical Proceedings of 1999 International Conference on Modeling and Simulation of Microsystems, 1999.

M. Varghese, V. L. Rabinovich, and S. Senturia, Reduced order models of stress stiffened MEMS structures, Technical Proceedings of the MSM 2000 International Conference on Modeling and Simulation of Microsystems, 2000.

E. S. Hungand and S. D. Senturia, Generating Eficient Dynamical Models for Micro electromechanical Systems from a Few Finite-Element Simulation Runs, In IEEE Journal of microelectromechanical systems Journal, vol.8, issue.3, 1999.

A. Khouas, Simulation de Fautes et Optimisation des Tests de Production pour les Circuits analogiques avec prise en compte des Tolérance, Thèse de l

C. Jeffrey, R. Rosing, and A. Richardson, Applications of mixed signal test strategies to next generation microsystems Design, modeling and simulation in microelectronics, proceedings of the SPIE, pp.21-32, 2000.

T. Olbrich, A. Richardson, W. Vermeiren, and B. Straube, Integrating testability into microsystems, Microsystem Technologies, vol.3, issue.2, pp.72-80
DOI : 10.1007/s005420050059

E. Simeu, D. Veychard, and J. M. Karam, Détection et identification de défauts à base de modèles dynamiques: application au test des microsystèmes, 2° Congrés pluridisciplinaire en qualité et sureté de fonctionnement

E. Simeu, Residual checking method for concurrent fault detection in linear analog systems, 4th IEEE International On-Line Testing Workshop, 1998.
URL : https://hal.archives-ouvertes.fr/hal-01384741

V. Beroulle, Y. Bertrand, L. Latorre, and P. Nouet, MEMS testing ? A case study, MSTW 2000 (international mixed testing workshop), pp.21-22, 2000.

L. Latorre, V. Beroulle, Y. Bertrand, and P. Nouet, MEMS monolithiques, application à la mesure du champ magnétique, Microcapteurs et microsystèmes intégrés, Hermes Sciences publications, 2000.

A. Lapadatu, H. Jakobsen, and R. Puers, A new concept for a self-testable pressure sensor based on the bimetal effect, Tech Digest 10th International Conference on Solid- State Sensors and Actuators (Transducers'99), 1999.
DOI : 10.1016/S0924-4247(99)00311-8

A. Cozma and R. Puers, Electrostatic actuation as a self test method for silicon pressure sensors, Sensors and Actuators A vol, pp.32-36, 1997.

R. Puers, D. De-bruyker, and A. Cozma, A novel combined redundant pressure sensor with self-test function, Sensors and Actuators A vol, pp.68-71, 1997.
DOI : 10.1016/S0924-4247(96)01436-7

D. De-bruyker, A. Cozma, and R. Puers, A combined piézoresistive/capacitive pressure sensor with self test function based on thermal actuation, Sensors and Actuators A vol, pp.70-75, 1998.

S. C. Terry, H. V. Allen, and D. W. De-bruin, Accelerometer systems with self-testable features, Sensors and Actuators A, pp.153-161, 1989.

L. Zimmermann, J. Ph, F. Ebersohl, J. P. Le-hung, F. Berry et al., Airbag application: a microsystem including a silicon capacitive accelerometer, CMOS switched capacitor electronics and true self-test capability, Sensors and Actuators A, pp.46-47190, 1995.
DOI : 10.1016/0924-4247(94)00888-O

M. Kraft, C. Lewis, T. Hesketh, and S. Szymkowiak, A novel micromachined accelerometer capacitive interface, Sensor and Actuator, A(68), pp.466-473
DOI : 10.1016/S0924-4247(98)00064-8
URL : http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.545.1593

M. Kraft, Closed loop digital accelerometer employing oversampling conversion, 1997.

F. Delpoux, Motorola and MEMS: The way up to a surface micromachined accelerometer, In Microelectronics Journal, vol.28, 1997.

S. Mir, B. Charlot, P. Nicolescu, F. Coste, N. Parrain et al., Towards design and validation of mixed-technology SOCs, Proceedings of the 10th Great Lakes Symposium on VLSI , GLSVLSI '00, 2000.
DOI : 10.1145/330855.330950
URL : https://hal.archives-ouvertes.fr/hal-00007757

P. J. French and A. G. Evans, Polycrystalline silicon strain sensors, Sensors and Actuators A, pp.219-225, 1985.
DOI : 10.1016/0250-6874(85)85004-6

P. J. French and A. G. Evans, Piezoresistance in polysilicon and its applications to strain gauges, Solid state electronics, pp.1-10, 1989.
DOI : 10.1016/0038-1101(89)90041-5

P. J. French and A. G. Evans, Polycrystalline silicon as a strain gauge material, Journal of Physics E: Scientific Instruments, vol.19, issue.12, pp.1055-1058, 1986.
DOI : 10.1088/0022-3735/19/12/016

L. Latorre, V. Beroulle, Y. Bertrand, and P. Nouet, MEMS monolithiques, application à la mesure du champ magnétique, Nano et Micro Technologies, Microcapteurs et microsystèmes intégrés, p.1, 2000.

Y. Belgnaoui, J. C. Guezel, and T. Mahé, Dossier : La biométrie, sésame absolu, Industries et techniques, p.817, 2000.

H. Morimura, S. Shigematsu, and K. Machida, A high-resolution capacitive fingerprint sensing scheme with charge-transfer technique and automatic contrast emphasis, 1999 Symposium on VLSI Circuits. Digest of Papers (IEEE Cat. No.99CH36326), 1999.
DOI : 10.1109/VLSIC.1999.797269

S. Jung, R. Thewes, T. Scheiter, K. Goser, and W. Weber, A low-power and high-performance CMOS fingerprint sensing and encoding architecture, IEEE Journal of Solid-State Circuits, vol.34, issue.7, 1999.
DOI : 10.1109/4.772413

F. Atmel-grenoble-fingerchip and . Parrain, Conception d'un capteur d'empreintes digitales utilisant des micro-poutres piézorésistives, 1999.

C. Marshall, N. Butler, R. Blackwell, R. Murphy, and T. Breen, Uncooled infrared sensors with digital focal plane array, Proceedings of SPIE Infrared Detectors and Focal Plane Arrays IV, pp.23-31, 1996.

D. Amingual and F. Bertrand, <title>Second-generation infrared detectors: present situation and prospects in France</title>, Detectors, Focal Plane Arrays, and Applications, pp.95-104, 1996.
DOI : 10.1117/12.252080

F. Van-steenkiste, D. Maes, L. Haspeslagh, S. Sedky, P. Van-gerwen et al., CMOS-based sensors and actuators, Proceedings Eleventh Annual IEEE International ASIC Conference (Cat. No.98TH8372), pp.393-397, 1998.
DOI : 10.1109/ASIC.1998.723047

A. Herwaarden and P. Sarro, Thermal sensors based on the seebeck effect, Sensors and Actuators A, pp.321-346, 1986.
DOI : 10.1016/0250-6874(86)80053-1

A. Herwaarden, D. Duyn, V. Oudheusden, and P. Sarro, Integrated thermopile sensors, Sensors and Actuators A, pp.621-630, 1989.
DOI : 10.1016/0924-4247(89)80046-9

G. Lahiji and K. Wise, A batch-fabricated silicon thermopile infrared detector, IEEE Transaction on electron devices, pp.14-22, 1982.
DOI : 10.1109/T-ED.1982.20652

D. Veychard, Conception et réalisation d'un convertisseur électro-thermique à grande constante de temps en technologie microsystème pour un disjoncteur thermique, Thèse de doctorat, INPG, 1999.

N. Schneeberge, O. Paul, and H. Baltes, Spectral lnfrared Absorption of CMOS Thin Film Stacks, IEEE MEMS 1999 Conference, 1999.

S. P. Woods, K. Lee, and J. Bryzek, An Overview of the IEEE-P1451.2 Smart Transducer Interface Module, In Analog Integrated Signal Processing, vol.14, pp.165-177, 1997.
DOI : 10.1007/978-1-4615-6061-6_2

F. Parrain, B. Charlot, and B. Courtois, Capteur infrarouge CMOS à thermopiles comportant des fonctions de self-test, Nano et Micro-Technologies, microcapteurs et microsystèmes intégrés, Hermes Sciences publications, 2001.
URL : https://hal.archives-ouvertes.fr/hal-01455450

S. Mir, F. Parrain, B. Charlot, and D. Veychard, Microbeams with electronically controlled high thermal impedance, ALOG Analog Integrated and Signal Processing, 2001.
URL : https://hal.archives-ouvertes.fr/hal-00012882

B. Charlot, F. Parrain, S. Mir, and B. Courtois, A Self-testable CMOS Thermopile-based Infrared Imager, DTIP2001 Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS, pp.25-27, 2001.
URL : https://hal.archives-ouvertes.fr/hal-00012879

B. Charlot, S. Mir, F. Parrain, and B. Courtois, Electrically induced stimuli for MEMS self-test, Proceedings 19th IEEE VLSI Test Symposium. VTS 2001, 2001.
DOI : 10.1109/VTS.2001.923441
URL : https://hal.archives-ouvertes.fr/hal-00007849

B. Charlot, S. Mir, F. Parrain, and B. Courtois, Generation of Electrically Induced Stimuli for MEMS self-test, Journal of electronic testing : theory and applications
URL : https://hal.archives-ouvertes.fr/hal-00007841

B. Courtois, S. Mir, B. Charlot, and M. Lubaszewski, From Microelectronics to MEMS Testing, IEEE Microelectronics Reliability and Qualification Workshop, 2000.
URL : https://hal.archives-ouvertes.fr/hal-01381237

S. Mir and B. Charlot, On the integration of design and test for chips embedding MEMS, IEEE design and test of computers, pp.28-38, 1999.
DOI : 10.1109/54.808204
URL : https://hal.archives-ouvertes.fr/hal-00013033

S. Mir, B. Charlot, and B. Courtois, Extending fault-based testing to microelectromechanical systems, European Test Workshop 1999 (Cat. No.PR00390), 1999.
DOI : 10.1109/ETW.1999.804234
URL : https://hal.archives-ouvertes.fr/hal-00007872

S. Mir, B. Charlot, F. Parrain, and D. Veychard, High thermal impedance beams for suspended MEMS, Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS, DTIP2000, pp.9-11, 2000.
URL : https://hal.archives-ouvertes.fr/hal-00013022

B. Courtois, B. Charlot, H. Delori, S. Eyraud, J. F. Paillotin et al., Achievements and Advances at CMP, European Workshop on Microelectronics Education, pp.18-19, 2000.
DOI : 10.1007/978-94-015-9506-3_14
URL : https://hal.archives-ouvertes.fr/hal-01381231

B. Charlot, S. Mir, E. F. Cota, M. Lubaszewski, and B. Courtois, Fault modeling of suspended thermal MEMS, International Test Conference 1999. Proceedings (IEEE Cat. No.99CH37034), 1999.
DOI : 10.1109/TEST.1999.805646
URL : https://hal.archives-ouvertes.fr/hal-00007871

B. Charlot, S. Moussouris, S. Mir, and B. Courtois, Fault modeling of electrostatic comb-drives for MEMS, Design, Test, and Microfabrication of MEMS and MOEMS, 1999.
DOI : 10.1117/12.341226
URL : https://hal.archives-ouvertes.fr/hal-00013030

B. Charlot, S. Mir, E. F. Cota, M. Lubaszewski, and B. Courtois, Fault simulation of MEMS using HDLs, Design, Test, and Microfabrication of MEMS and MOEMS, 1999.
DOI : 10.1117/12.341215
URL : https://hal.archives-ouvertes.fr/hal-00012870

B. Charlot and S. Mir, Intégration de la Conception et du Test dans des Puces avec Dispositifs Microsystème Embarqués, Colloque CAO de circuits intégrés et systèmes, pp.10-12, 1999.

S. Mir, B. Charlot, and B. Courtois, Extended fault based testing to microelectromechanical systems, European Test Workshop, ETW'99, 1990.