M. [. Ashrafizadeh and . Ashrafizaadeh, Influence of processing parameters on grinding mechanism in planetary mill by employing discrete element method. Advanced Powder Technolgy, pp.708-716, 2012.

E. [. Alvarez, E. Arruti, A. Aldanondo, and . Echeverria, Understanding material flow in FSW and its implications, Friction Stir Welding and Processing, 2012.

I. [. André, J. L. Iordanoff, J. Charles, and . Néauport, Discrete element method to simulate continuous material by using the cohesive beam model, Computer Methods in Applied Mechanics and Engineering, vol.213, issue.216, pp.213-216113, 2012.
DOI : 10.1016/j.cma.2011.12.002

. N. Alh-+-12-]-j, J. S. Aoh, C. W. Lin, S. C. Huang, and Y. P. Yang, Huang : Friction stir welding and Fabricating of Particulate reinforced Al 6061/SiC Metal Matrix Composites, Proceedings of the Second International Conference Friction Stir Welding and Processing, 2012.

I. Alfaro, G. Racineux, A. Poitou, E. Cueto, and F. Chinesta, Numerical simulation of friction stir welding by natural element methods, SIGGRAPH'94 : Proceedings of the 21st annual conference on Computer graphics and interactive techniques, Computer Graphics Proceedings, Annual Conference Series, pp.225-234, 1994.
DOI : 10.1007/s12289-009-0406-z

URL : https://hal.archives-ouvertes.fr/hal-01008563

S. [. Bassett and . Birley, Friction Stir Welding of Aluminium Armour, Proceedings of the Second International Symposium on Friction Stir Welding, 2000.

. Bbd-+-99-]-g, R. Biallas, C. Braun, G. Dalle-donne, and W. A. Staniek, Kaysser : Mechanical properties and corrosion behavior of friction stir welded 2024-T3, Proceedings of the First International Symposium on Friction Stir Welding, 1999.

J. [. Buffa, R. Hua, L. Shivpuri, and . Fratini, A continuum based fem model for friction stir welding???model development, Materials Science and Engineering: A, vol.419, issue.1-2, pp.389-396, 2006.
DOI : 10.1016/j.msea.2005.09.040

P. [. Bussu and . Irving, Fatigue performance of Friction Stir Welded 2024-T351 auminium joints, Proceedings of the First International Symposium on Friction Stir Welding, 1999.

]. S. Blm-+-99, Y. Benavides, L. E. Li, D. Murr, and J. C. Brown, McClure : Low-temperature friction-stir welding of 2024 aluminum, Scripta Materialia, issue.8, pp.41809-815, 1999.

T. [. Bendzsak and C. B. North, Smith : An Experimentally Validated 3D Model for Friction Stir Welding, Proceedings of the Second International Symposium on Friction Stir Welding, 2000.

]. M. Bvdks00, A. J. Brooker, S. W. Van-deudekom, P. D. Kallee, and . Sketchley, Applying Friction Stir Welding to the Ariane 5 Main Motor Thrust Frame, Proceedings of the Second International Symposium on Friction Stir Welding, 2000.

]. W. Cal96, Callister : Introducción a la ciencia e ingeniería de los materiales . Reverté, 1996.

S. [. Chinesta, E. Cescotto, P. Cueto, and . Lorong, Natural Element Method for the Simulation of Structures and Processes, 2010.
DOI : 10.1002/9781118616901

URL : https://hal.archives-ouvertes.fr/hal-01002856

R. [. Charit and . Mishra, High strain rate superplasticity in a commercial 2024 Al alloy via friction stir processing, Materials Science and Engineering: A, vol.359, issue.1-2, pp.290-296, 2003.
DOI : 10.1016/S0921-5093(03)00367-8

E. [. Chenot and . Massoni, Finite element modelling and control of new metal forming processes, International Journal of Machine Tools and Manufacture, vol.46, issue.11, pp.1194-1200, 2006.
DOI : 10.1016/j.ijmachtools.2006.01.031

URL : https://hal.archives-ouvertes.fr/hal-00512769

C. [. Camborde and F. V. Mariotti, Numerical study of rock and concrete behaviour by discrete element modelling, Computers and Geotechnics, vol.27, issue.4, pp.225-247, 2000.
DOI : 10.1016/S0266-352X(00)00013-6

M. [. Colegrove, D. Painter, and . Graham, Miller : 3 Dimensional Flow and Thermal Modelling of the Friction Stir Welding Process, Proceedings of the Second International Symposium on Friction Stir Welding, 2000.

]. J. Cra56 and . Crank, The Mathematics of Diffusion, 1956.

]. P. Bibliographie-[-cun71, Cundall : A computer model for simulating progressive, large-scale movements of blocky rock systems, Proceedings of the symposium of the International Society of Rock Mechanics, 1971.

P. [. Fortin and . Coorevits, Selecting contact particles in dynamics granular mechanics systems, Journal of Computational and Applied Mathematics, vol.168, issue.1-2, pp.207-213, 2004.
DOI : 10.1016/j.cam.2003.05.025

P. [. Fleissner and . Eberhard, Load Balanced Parallel Simulation of Particle-Fluid DEM-SPH Systems with Moving Boundaries, Parallel Computing : Architectures, Algorithms and Applications, vol.38, pp.37-44, 2007.

T. [. Fleissner, P. Gaugele, and . Eberhard, Applications of the discrete element method in mechanical engineering, Multibody System Dynamics, vol.11, issue.2, pp.81-94, 2007.
DOI : 10.1007/s11044-007-9066-2

I. [. Fillot, Y. Iordanoff, and . Berthier, Modelling third body flows with a discrete element method???a tool for understanding wear with adhesive particles, Tribology International, vol.40, issue.6, pp.973-981, 2007.
DOI : 10.1016/j.triboint.2006.02.056

URL : https://hal.archives-ouvertes.fr/hal-00380743

. [. Ferrez, . M. Th, and . Liebling, Dynamic triangulations for efficient detection of collisions between spheres with applications in granular media simulations, Philosophical Magazine Part B, vol.82, issue.8, pp.905-929, 2002.
DOI : 10.1080/13642810208218352

T. [. Ferrez, D. Liebling, and . Müller, Dynamic Triangulations for Granular Media Simulations, KlausR. Mecke et Dietrich Stoyan, éditeurs : Statistical Physics and Spatial Statistics, pp.394-409, 2000.
DOI : 10.1007/3-540-45043-2_15

]. C. Gdddc05, A. Genevois, A. Deschamps, and . Denquin, Doisneaucottignies : Quantitative investigation of precipitation and mechanical behaviour for AA2024 friction stir welds, Acta Materialia, issue.8, pp.532447-2458, 2005.

L. [. Guerdoux, . [. Fourment, L. Guerdoux, and . Fourment, ALE formulation for the numerical simulation of Friction Stir Welding Error Estimation And Accurate Mapping Based ALE Formulation For 3D Simulation Of Friction Stir Welding, Proceedings of the VIII International Conference on Computational Plasticity Proceedings of the IX International Conference on Numerical Methods in Industrial Forming Processes, 2005.

F. [. Gaugele, P. Fleissner, and . Eberhard, Simulation of material tests using meshfree Lagrangian particle methods, Proceedings of the Institution of Mechanical Engineers, pp.327-338, 2008.
DOI : 10.1243/14644193JMBD167

]. D. Gre91 and . Greenspan, Quasimolecular modelling, volume 44 de World scientific lecture notes in physics, 1991.

S. [. Horie and . Case, Mesodynamics of shock waves in a polycrystalline metal, Shock Waves, vol.7, issue.1-2, pp.135-141, 2007.
DOI : 10.1007/s00193-007-0090-1

. Hdw-+-01-]-f, A. J. Hannour, S. W. Davenport, P. C. Williams, and C. C. Morgan, Figgures : Corrosion Behaviour of Laser Treated Friction Stir Welds In High Strength Aluminium Alloys, Proceedings of the Third International Symposium on Friction Stir Welding, 2001.

M. [. Haddad, J. Guessasma, and . Fortin, Heat transfer by conduction using DEM???FEM coupling method, Computational Materials Science, vol.81, 2013.
DOI : 10.1016/j.commatsci.2013.08.033

. Hjd-+-06-]-p, M. J. Heurtier, C. Jones, J. H. Desrayaud, F. Driver et al., Allehaux : Mechanical and thermal modelling of Friction Stir Welding, Journal of Materials Processing Technology, vol.3, issue.1, pp.171348-357, 2006.

M. [. Hahn, B. H. Schwarz, T. Kröplin, and . Wallmersperger, Discrete Element Method for the thermal field: Proof of concept and determination of the material parameters, Computational Materials Science, vol.50, issue.10, pp.2771-2784, 2011.
DOI : 10.1016/j.commatsci.2011.04.028

T. [. Hahn, B. H. Wallmersperger, and . Kröplin, Discrete element representation of continua: Proof of concept and determination of the material parameters, Computational Materials Science, vol.50, issue.2, pp.391-402, 2010.
DOI : 10.1016/j.commatsci.2010.08.031

[. Horie and K. Yano, Discrete element modeling of shock compression of hexagonal boron nitride powder with and without copper addition, Journal of Materials Processing Technology, vol.85, issue.1-3, pp.1-3109, 1999.
DOI : 10.1016/S0924-0136(98)00272-6

A. [. Iordanoff, J. Battentier, and J. L. Néauport, Charles : A discrete element model to investigate sub-surface damage due to surface polishing, Tribology International, issue.11, pp.41957-964, 2008.

B. [. Iordanoff, Y. Seve, and . Berthier, Using Discrete Models to Simulate Solid Third Bodies : Influece of Inter-granule Forces on the Macroscopical Behaviour. Tribology series, pp.361-368, 2002.

J. M. Jebahi, F. Charles, and L. Dau, Illoul et I. Iordanoff : 3D coupling approach between discrete and continuum models for dynamic simulations (DEM?CNEM), Computer Methods in Applied Mechanics and Engineering, issue.0, pp.255196-209, 2013.

]. J. Jon24 and . Jones, On the Determination of Molecular Fields, Containing Papers of a Mathematical and Physical Character, pp.441-462, 1924.

. Kaa-+-92-]-n, T. Kusano, J. Aoyagi, H. Aizawa, H. Ueno et al., Impulsive local damage analyses of concrete structure by the distinct element method, Nuclear Engineering and Design, vol.138, issue.1, pp.105-110, 1992.

N. [. Koziara and . Bi´cani´cbi´cani´bi´cani´c, Bounding box collision detection, 13th acme conference : university of sheffield, 2005.

M. [. Liu and . Liu, ?Smoothed particle hydrodynamics ? a meshfree method?, Computational Mechanics, vol.33, issue.6, 2003.
DOI : 10.1007/s00466-004-0573-1

]. B. Lmb-+-01, M. London, W. Mahoney, M. Bingel, D. Calabrese et al., Experimental methods for determining material flow in friction stir welds, Proceedings of the Third International Symposium on Friction Stir Welding, 2001.

]. D. Loh00 and . Lohwasser, Application of Friction Stir Welding for Aircraft Industry, Proceedings of the Second International Symposium on Friction Stir Welding, 2000.

]. D. Loh01 and . Lohwasser, Welding of Airframes by Friction Stir, Proceedings of the Third International Symposium on Friction Stir Welding, 2001.

O. [. Luding and . Strauß, The Equation of State for Almost Elastic, Smooth, Polydisperse Granular Gases for Arbitrary Density, Granular Gases, pp.389-409, 2001.
DOI : 10.1007/3-540-44506-4_21

]. L. Bibliographie-[-luc77 and . Lucy, A numerical approach to the testing of the fission hypothesis, The Astronomical Journal, vol.82, issue.12, pp.1013-1024, 1977.

]. F. Mar01 and . Marie, Development of Friction Stir Welding of 7000 serie extrusions for central wing box application, Proceedings of the Third International Symposium on Friction Stir Welding, 2001.

V. [. Mccarthy, M. Jasti, C. F. Marinack, and . Higgs, Quantitative validation of the discrete element method using an annular shear cell, Powder Technology, vol.203, issue.1, pp.70-77, 2010.
DOI : 10.1016/j.powtec.2010.04.011

Z. [. Mishra, Friction stir welding and processing, Materials Science and Engineering: R: Reports, vol.50, issue.1-2, pp.1-78, 2005.
DOI : 10.1016/j.mser.2005.07.001

M. [. Muth, P. Müller, and . Eberhard, Luding : Collision Detection and Administration Methods for Many Particles with Different Sizes, 4th International Conference on Discrete Element Methods, 2007.

E. [. Miori, G. F. Prados, and . Batalha, Investigation of superplasticity in a friction stir processed AA 5054 alloy, Proceedings of the Second International Conference Friction Stir Welding and Processing, 2012.

A. [. Mio, Y. Shimosaka, J. Shirakawa, and . Hidaka, Cell optimization for fast contact detection in the discrete element method algorithm, Advanced Powder Technology, vol.18, issue.4, pp.441-453, 2007.
DOI : 10.1163/156855207781389519

I. [. Norman and P. B. Brough, Prangnell : High Resolution EBSD Analysis of the Grain Structure in an AA2024 Friction Stir Weld, Materials Science Forum, pp.331-3371713, 2000.

. [. Nouari, Effect of the third-body particles on the tool???chip contact and tool-wear behaviour during dry cutting of aeronautical titanium alloys, Tribology International, vol.40, issue.9, pp.1351-1359, 2007.
DOI : 10.1016/j.triboint.2007.03.003

S. [. Ogarko and . Luding, Data structures and algorithms for contact detection in numerical simulation of discrete particle systems, 6th World Congress on Particle Technology, 2010.

S. [. Ogarko and . Luding, A fast multilevel algorithm for contact detection of arbitrarily polydisperse objects, Computer Physics Communications, vol.183, issue.4, pp.931-936, 2012.
DOI : 10.1016/j.cpc.2011.12.019

A. [. Pérez-castellanos and . Rusinek, Temperature increase associated with plastic deformation under dynamic compression : Application to aluminium alloy Al 6082, Journal of theoretical and applied mechanics, vol.50, issue.2, pp.377-398, 2012.

T. [. Pöschel and . Schwager, Computational Granular Dynamics, 2005.

C. [. Quentrec and . Brot, New method for searching for neighbors in molecular dynamics computations, Journal of Computational Physics, vol.13, issue.3, pp.430-432, 1973.
DOI : 10.1016/0021-9991(73)90046-6

I. [. Rognon, J. Einav, T. Bonivin, and . Miller, A scaling law for heat conductivity in sheared granular materials, EPL (Europhysics Letters), vol.89, issue.5, p.58006, 2010.
DOI : 10.1209/0295-5075/89/58006

]. D. Ric08 and . Richard, Thermique des contacts avec troisième corps solide

I. [. Richard, M. Iordanoff, Y. Renouf, and . Berthier, Thermal Study of the Dry Sliding Contact With Third Body Presence, Journal of Tribology, vol.130, issue.3, p.10, 2008.
DOI : 10.1115/1.2913540

URL : https://hal.archives-ouvertes.fr/hal-00381432

J. [. Rusinek and . Klepaczko, Experiments on heat generated during plastic deformation and stored energy for TRIP steels, Materials & Design, vol.30, issue.1, pp.35-48, 2009.
DOI : 10.1016/j.matdes.2008.04.048

H. [. Russell and . Shercliff, Analytical Modelling of Microstructure Development in Friction Stir Welding, Proceedings of the First International Symposium on Friction Stir Welding, 1999.

. [. Sun, Apelian : Effect of FSP and Post-FSP Heat Treatment on Tensile Properties of Cast A206 Al Alloy, Proceedings of the Second International Conference Friction Stir Welding and Processing, 2012.

J. [. Sanni and P. Fortin, Coorevits : Gestion des contacts 3D pour une modélisation Éléments Discrets, 7ème colloque national en calcul des structures, 2005.

J. [. Schmidt and . Hattel, A local model for the thermomechanical conditions in friction stir welding, Modelling and Simulation in Materials Science and Engineering, vol.13, issue.1, pp.77-93, 2005.
DOI : 10.1088/0965-0393/13/1/006

]. G. Bibliographie-[-she00 and . Shepherd, The potential for using solid phase welding to repair cracks that may occur on thin aluminium aircraft wing structure, Proceedings of the Second International Symposium on Friction Stir Welding, 2000.

B. [. Sukumar, T. Moran, and . Belytschko, The natural element method in solid mechanics, International Journal for Numerical Methods in Engineering, vol.27, issue.5, pp.839-887, 1998.
DOI : 10.1002/(SICI)1097-0207(19981115)43:5<839::AID-NME423>3.0.CO;2-R

]. A. Smm-+-12, A. Simar, H. M. Mertens, J. Montrieux, J. Lecomte-beckers et al., Microstructure and mechanical properties of friction stir processed magnesium matrix composites reinforced with carbon fibres, Proceedings of the Second International Conference Friction Stir Welding and Processing, 2012.

]. Z. Tan01, Tang : Three-dimensional DEM theory and its application to impact mechanics, Science in China (Series E), vol.44, issue.6, 2001.

D. [. Talwar, R. Bolser, J. Lederich, and . Baumann, Friction Stir Welding of Airframe Structures, Proceedings of the Second International Symposium on Friction Stir Welding, 2000.

G. [. Tartakovsky, X. Grant, and . Sun, Khaleel : Modeling of Friction Stir Welding (FSW) Process with Smooth Particle Hydrodynamics (SPH), Proceedings of the SAE 2006 World Congress, 2006.

M. Heidelberg, D. Müller, M. Pomeranets, and . Gross, Optimized Spatial Hashing for Collision Detection of Deformable Objects, Proceding of Vision, Modeling, Visualization VMV'03, pp.47-54, 2003.

Y. [. Tang and S. G. Horie, Psakhie : Discrete Meso-Element Modeling of Shock Processes in Powders, High-Pressure Shock Compression of Solids IV. L. Davison et al, pp.143-176, 1997.

I. Terreros, I. Iordanoff, J. L. Charles, D. Coupard, and S. Tcherniaieff, Discrete element method, a tool to investigate complex thermo mechanical behaviour: application to friction stir welding, International Journal of Material Forming, vol.146, issue.S1, pp.573-576, 2009.
DOI : 10.1007/s12289-009-0433-9

URL : https://hal.archives-ouvertes.fr/hal-01133605

I. [. Terreros, J. L. Iordanoff, and . Charles, Simulation of continuum heat conduction using DEM domains, Computational Materials Science, vol.69, pp.46-52, 2013.
DOI : 10.1016/j.commatsci.2012.11.021

URL : https://hal.archives-ouvertes.fr/hal-00744084

W. [. Tang and . Liu, Dynamic multi-pore collapse response with discrete meso-element method. Theoretical and Applied Fracture Mechanics, pp.39-45, 2001.
DOI : 10.1016/s0167-8442(00)00047-1

. M. Tnn-+-92-]-w, E. D. Thomas, J. C. Nicholas, M. G. Needham, P. Murch et al., Dawes : Improvements relating to Friction Welding, 1992.

M. [. Tavarez and . Plesha, Discrete element method for modelling solid and particulate materials, International Journal for Numerical Methods in Engineering, vol.25, issue.4, pp.379-404, 2007.
DOI : 10.1002/nme.1881

]. A. Tzm-+-11, H. Timesli, A. Zahrouni, V. Moufki, B. Favier et al., Modélisation du procédé de soudage FSW à l'aide de la méthode SPH, X Colloque National en Calcul des Structures, Presqu'île de Giens (Var), 2011.

]. L. Ver67 and . Verlet, Computer "Experiments" on Classical Fluids. I. Thermodynamical Properties of Lennard-Jones Molecules, Physical Review, vol.159, issue.1, pp.98-103, 1967.

J. [. Vargas and . Mccarthy, Heat conduction in granular materials, AIChE Journal, vol.121, issue.5, pp.1052-1059, 2001.
DOI : 10.1002/aic.690470511

]. W. Vm02a, J. J. Vargas, and . Mccarthy, Conductivity of granular media with stagnant interstitial fluids via thermal particle dynamics simulation, International Journal of Heat and Mass Transfer, vol.45, pp.4847-4856, 2002.

]. W. Vm02b, J. J. Vargas, . L. Mccarthyvm07-]-w, J. J. Vargas, and . Mccarthy, Stress effects on the conductivity of particulate beds Thermal expansion effects and heat conduction in granular materials, Chemical Engineering Science Physical Review E -Statistical, Nonlinear and Soft Matter Physics, vol.57, issue.764, pp.3119-3131041301, 2002.

N. [. Vijay and . Murugan, Influence of tool pin profile on the metallurgical and mechanical properties of friction stir welded Al?10 wt.% TiB 2 metal matrix composite, Materials & Design, issue.7, pp.313585-3589, 2010.

J. [. Vargas, L. E. Murcia, D. M. Palacio, and . Dominguez, Fractional diffusion model for force distribution in static granular media, Physical Review E, vol.68, issue.2, p.21302, 2003.
DOI : 10.1103/PhysRevE.68.021302

. L. Bibliographie-[-wb10-]-c, A. S. Wu, and . Berrouk, Conceptual comparative study between efficient collision-handling algorithms used for Molecular Dynamics (MD) and Discrete Particle Model (DPM), Powder Technology, vol.198, issue.3, pp.435-438, 2010.

A. [. Wu and . Berrouk, An efficient chained-hash-table strategy for collision handling in hard-sphere discrete particle modeling, Powder Technology, vol.197, issue.1-2, pp.58-67, 2010.
DOI : 10.1016/j.powtec.2009.08.018

R. [. Williams and . Connor, Discrete element simulation and the contact problem, Archives of Computational Methods in Engineering, vol.9, issue.4, pp.279-304, 1999.
DOI : 10.1007/BF02818917

F. [. Yvonnet, P. Chinesta, D. Lorong, and . Ryckelynck, The constrained natural element method (C-NEM) for treating thermal models involving moving interfaces, International Journal of Thermal Sciences, vol.44, issue.6, pp.559-569, 2005.
DOI : 10.1016/j.ijthermalsci.2004.12.007

URL : https://hal.archives-ouvertes.fr/hal-00021103

K. Yano and Y. , Mesomechanics of the ??????? transition in iron, International Journal of Plasticity, vol.18, issue.11, pp.1427-1446, 2002.
DOI : 10.1016/S0749-6419(02)00024-4

D. [. Yvonnet, P. Ryckelynck, F. Lorong, and . Chinesta, A new extension of the natural element method for non-convex and discontinuous problems: the constrained natural element method(C-NEM), International Journal for Numerical Methods in Engineering, vol.60, issue.8
DOI : 10.1002/nme.1016

URL : https://hal.archives-ouvertes.fr/hal-01508695

Y. [. Zhu and . Chao, Numerical simulation of transient temperature and residual stresses in friction stir welding of 304L stainless steel, Journal of Materials Processing Technology, vol.146, issue.2, pp.263-272, 2004.
DOI : 10.1016/j.jmatprotec.2003.10.025

]. T. Zoh05 and . Zohdi, Charge-induced clustering in multifield particulate flows, International Journal for Numerical Methods in Engineering, vol.62, pp.870-898, 2005.

R. [. Zienkiewicz and J. Z. Taylor, Zhu : The Finite Element Method : Its Basis and Fundamentals : A fully coupled thermo-mechanical model of friction stir welding, The International Journal of Advanced Manufacturing Technology, vol.6, issue.37, pp.279-293, 2005.

Q. [. Zhang, H. L. Zhou, and . Xing, Muhlhaus : A discrete element method study on the effective thermal conductivity of granular assemblies, Powder Technology, vol.205, pp.1-3172, 2011.