]. D. Bibliographie1, C. E. Allen, S. E. Harris, and . Groves, A thermomechanical constitutive theory for elastic composites with distributed damage, Int. J. Solids Structures, vol.23, issue.9, pp.1301-1338, 1987.

O. Allix and P. Ladevèze, Interlaminar interface modelling for the prediction of delamination, Composite Structures, vol.22, issue.4, pp.235-242, 1992.
DOI : 10.1016/0263-8223(92)90060-P

O. Allix, D. Lévêque, and L. Perret, Identification and forecast of delamination in composite laminates by an interlaminar interface model, Composites Science and Technology, vol.58, issue.5, pp.671-678, 1998.
DOI : 10.1016/S0266-3538(97)00144-9

E. Aussedat-yahia, Comportement et endommagement du composite tissé Car- bone/PMR15 soumisàsoumisà des chargements mécaniques et thermiques, 1997.

M. L. Benzeggagh, Détection et identification des endommagements lors d'un processus de délaminage, Délaminage : bilan et perspectives, journées AMAC/CSMA, pp.49-83, 1995.

J. M. Berthelot, Matériaux Composites -Comportement mécanique et analyse des structures. Masson, 3` emes edition, 1995.

J. L. Billoet, T. B. Zineb, and B. B. Lazreg, Approche semi-mésoscopique et effet de bord libre des plaques stratifiés, Dans le délaminage : bilan et perspectives, pp.129-138, 1995.

J. C. Brewer and P. A. Lagace, Quadratic Stress Criterion for Initiation of Delamination, Journal of Composite Materials, vol.8, issue.12, pp.1141-1155, 1988.
DOI : 10.1177/002199838802201205

J. F. Caron, R. P. Carreira, A. Diaz, and . Diaz, Crit??re d'initiation de d??laminage dans les stratifi??s, Comptes REndus de l'Académie des Sciences, pp.1291-1296, 1999.
DOI : 10.1016/S1287-4620(99)90004-2

J. F. Caron, A. Diaz-diaz, R. P. Carreira, A. Chabot, and A. Ehrlacher, Multi-particle modelling for the prediction of delamination in multi-layered materials, Composites Science and Technology, vol.66, issue.6, pp.755-765, 2006.
DOI : 10.1016/j.compscitech.2004.12.022

J. Chaboche, Le concept de contrainte effective appliquéappliquéà l'´ elasticité etàet`età la viscoplasticité en présence d'un endommagement anisotrope, Mechanical behavior of anisotropic solids, pp.737-760, 1982.
DOI : 10.1007/978-94-009-6827-1_43

J. Chaboche, Damage Induced Anisotropy: On the Difficulties Associated with the Active/Passive Unilateral Condition, International Journal of Damage Mechanics, vol.1, issue.2, pp.148-171, 1992.
DOI : 10.1177/105678959200100201

]. H. Chai, The characterization of Mode I delamination failure in non-woven, multidirectional laminates, Composites, vol.15, issue.4, pp.277-290, 1984.
DOI : 10.1016/0010-4361(84)90708-0

F. W. Crossman and A. S. Wang, The Dependence of Transverse Cracking and Delamination on Ply Thickness in Graphite/Epoxy Laminates, Damage in Composite Materials, pp.118-139, 1980.
DOI : 10.1520/STP34324S

A. Diaz-diaz and J. Caron, Prediction of the onset of mode III delamination in carbon-epoxy laminates, Composite Structures, vol.72, issue.4, pp.438-445, 2006.
DOI : 10.1016/j.compstruct.2005.01.014

A. D. Diaz-diaz and J. F. Caron, Prediction of the onset of mode III delamination in carbon-epoxy laminates, Composite Structures, vol.72, issue.4, pp.438-445, 2006.
DOI : 10.1016/j.compstruct.2005.01.014

D. Engrand, A Boundary Layer Approach to the Calculation of Transverse Stresses along the Free Edges of a Symmetric Laminated Plate of Arbitrary Width Under In-plane Loading, Composite Structures, pp.198-247, 1981.
DOI : 10.1007/978-94-009-8120-1_17

J. Favre and J. Laizet, Amplitude and counts per event analysis of the acoustic emission generated by the transverse cracking of cross-ply CFRP, Composites Science and Technology, vol.36, issue.1, 1989.
DOI : 10.1016/0266-3538(89)90014-6

F. Gao, L. Boniface, S. L. Ogin, P. A. Smith, and R. P. Greaves, Damage accumulation in woven-fabric CFRP laminates under tensile loading: Part 1. Observations of damage accumulation, Composites Science and Technology, vol.59, issue.1, pp.123-136, 1997.
DOI : 10.1016/S0266-3538(97)00231-5

K. W. Garret and J. E. Bailey, Multiple transverse fracture in 90??? cross-ply laminates of a glass fibre-reinforced polyester, Journal of Materials Science, vol.3, issue.1, pp.157-168, 1977.
DOI : 10.1007/BF00738481

M. Haboussi, H. Dumontet, and J. L. Billoet, Interlayers in laminates : modelling and influence on the free-edge effects, ICCM 12 Paris, 1998.

R. Harry, E. Lecuyer, and G. Marion, Détection expérimentale de l'amorçage du délaminage de stratifiésstratifiésà l'aide de l'´ emission accoustique, Comptes rendus des onzì emes journées nationales sur les composites, pp.787-795, 1998.

C. Hwu and J. S. Hu, Stress intensity factors and energy release rates of delaminations in composite laminates, Engineering Fracture Mechanics, vol.42, pp.977-988, 1992.

C. Hwu, C. J. Kao, and L. E. Chang, Delamination Fracture Criteria for Composite Laminates, Journal of Composite Materials, vol.29, issue.15, pp.1962-1987, 1995.
DOI : 10.1177/002199839502901502

L. P. Isupov and S. E. Mikhailov, A comparative analysis of several nonlocal fracture criteria. Archive of applied mechanics, pp.597-612, 1998.

R. Y. Kim and S. R. Soni, Experimental and Analytical Studies On the Onset of Delamination in Laminated Composites, Journal of Composite Materials, vol.8, issue.3, pp.70-80, 1984.
DOI : 10.1177/002199838401800106

R. Y. Kim and S. R. Soni, Failure of composite laminates due to combined interlaminar normal and shear stresses, Composites, pp.341-350, 1986.

. Y. Kim, Interlaminar response of composite materials, 1989.

P. Ladevèze, Sur la modélisation et le calcul des structures composites, Comptes Rendus desSixì emes Journées Nationales sur les Composites, pp.697-712, 1988.

P. Ladevèze, Sur la modélisation et le calcul des structures composites, Comptes Rendus desSixì emes Journées Nationales sur les Composites, pp.697-712, 1988.

P. Ladevèze, A. Gasser, and O. Allix, Damage Mechanisms Modeling for Ceramic Composites, Journal of Engineering Materials and Technology, vol.116, issue.3, pp.331-336, 1994.
DOI : 10.1115/1.2904296

P. Lagace, J. Brewer, and C. Kassapoglou, The effect of thickness on interlaminar stresses and delamination in straight-edged laminates, Journal of Composites Technology and Research, vol.9, issue.3, pp.81-87, 1987.

L. Lagnunegrand, Mise enévidenceenévidence expériementale et prise en compte dans la formulation d'un critère d'amorçage du délaminage, de l'influence des contraintes normales inter plis au sein d'un matériau composite, 2004.

L. Lagunegrand, T. Lorriot, R. Harry, H. Wargnier, and J. M. Quenisset, Initiation of free-edge delamination in composite laminates, Composites Science and Technology, vol.66, issue.10, pp.1-13, 2005.
DOI : 10.1016/j.compscitech.2005.10.010

F. Lecuyer, Etudes des effets de bords dans les structures minces multicouches, 1991.

F. Lécuyer and D. Engrand, Présentation d'une méthodologie d'identification d'un critère d'initiation du délaminage, Comptes rendus deshuitì emes journées nationales sur les composites, pp.751-761, 1992.

J. W. Lee and D. H. Allen, Internal State Variable Approach for Predicting Stiffness Reductions in Fibrous Laminated Composites with Matrix Cracks, Journal of Composite Materials, vol.23, issue.12, pp.1273-1291, 1989.
DOI : 10.1177/002199838902301205

S. M. Lee, Failure Mechanisms of Edge Delamination of Composites, Journal of Composite Materials, vol.24, issue.11, pp.1200-1212, 1990.
DOI : 10.1177/002199839002401106

D. Leguillon, A method based on singularity theory to predict edge delamination of laminates, International Journal of Fracture, vol.100, issue.1, pp.105-120, 1999.
DOI : 10.1023/A:1018382422833

D. Leguillon, G. Marion, R. Harry, and F. Lécuyer, The onset of delamination at stress-free edges in angle-ply laminates????? analysis of two criteria, Composites Science and Technology, vol.61, issue.3, pp.377-382, 2001.
DOI : 10.1016/S0266-3538(00)00105-6

T. Lorriot, G. Marion, R. Harry, and H. Wargnier, Onset of free-edge delamination in composite laminates under tensile loading, Composites Part B: Engineering, vol.34, issue.5, pp.459-471, 2003.
DOI : 10.1016/S1359-8368(03)00016-7

B. Macquaire and J. Renard, Kinetic of tranverse matrix cracking in (0n, 90m)s composites under tension or shear static loading, 6th European Conference on Composite Materials, pp.693-701, 1993.

G. Marion, Etude expériementale et théorique de l'amorçage du délaminage au bord de matériaux composites stratifiés, 2000.

J. M. Mckinney, Mixed-Mode Fracture of Unidirectional Graphite/Epoxy Composites, Journal of Composite Materials, vol.34, issue.1, 1972.
DOI : 10.1177/002199837200600115

J. Mercier, Prise en compte du vieillissement et de l'endommagement dans le dimensionnement de structures en matériaux composites, 2006.

G. Nicoletto and E. Riva, Failure mechanisms in twill-weave laminates: FEM predictions vs. experiments, Composites Part A: Applied Science and Manufacturing, vol.35, issue.7-8, p.35, 2004.
DOI : 10.1016/j.compositesa.2004.01.007

T. K. O-'brien, Characterization of delamination onset and growth in a composite laminate, pp.140-167, 1982.

Y. Okabe, T. Mizutani, S. Yashiro, and N. Takeda, Detection of microscopic damages in composite laminates, Composites Science and Technology, vol.62, issue.7-8, pp.951-958, 2002.
DOI : 10.1016/S0266-3538(02)00009-X

T. Osada, A. Nakai, and H. Hamada, Initial fracture behavior of satin woven fabric composites, Composite Structures, vol.61, issue.4, pp.333-339, 2003.
DOI : 10.1016/S0263-8223(03)00058-8

N. J. Pagano and S. R. Soni, Interlaminar response of composite materials chapter Fracture analysis of interlaminar cracking, pp.1-68, 1989.

N. J. Pagano and E. F. Rybicki, On the Significance of Effective Modulus Solutions for Fibrous Composites, Journal of Composite Materials, vol.8, issue.3, p.214, 1974.
DOI : 10.1177/002199837400800301

A. B. Pereira and A. B. De-morais, Mode I interlaminar fracture of carbon/epoxy multidirectional laminates, Composites Science and Technology, vol.64, issue.13-14, pp.2261-2270, 2004.
DOI : 10.1016/j.compscitech.2004.03.001

A. B. Pereira, A. B. De-morais, A. T. Marques, and P. T. De-castro, Mode II interlaminar fracture of carbon/epoxy multidirectional laminates, Composites Science and Technology, vol.64, issue.10-11, pp.1653-1659, 2004.
DOI : 10.1016/j.compscitech.2003.12.001

P. W. Peters and T. Chou, On cross-ply cracking in glass and carbon fibre-reinforced epoxy laminates, Composites, vol.18, issue.1, pp.40-46, 1987.
DOI : 10.1016/0010-4361(87)90006-1

R. B. Pipes and N. J. Pagano, Interlaminar Stresses in Composite Laminates Under Uniform Axial Extension, Journal Composite Materials, pp.538-548, 1970.
DOI : 10.1007/978-94-017-2233-9_19

A. H. Puppo and H. A. Evensen, Interlaminar Shear in Laminated Composites Under Generalized Plane Stress, Journal of Composite Materials, vol.3, issue.2, pp.204-220, 1970.
DOI : 10.1177/002199837000400206

D. Purslow, Matrix fractography of fibre-reinforced epoxy composites, Composites, vol.17, issue.4, pp.289-303, 1986.
DOI : 10.1016/0010-4361(86)90746-9

K. L. Reifsnider, Some fundamental aspects of fatigue and fracture response of composite materials, Proceedings of 14th Meeting of Society of Engineering Science, pp.373-384, 1977.

E. Reissner, On a Variational Theorem in Elasticity, Journal of Mathematics and Physics, vol.5, issue.1-4, 1950.
DOI : 10.1002/sapm195029190

J. Renard, J. Favre, and T. Jeggy, Modélisation de la fissuration transverse dans les stratifiés carbone-résinè a l ? Saide d ? Sune description physique du défaut, Comptes rendus desseptì emes journées nationales sur les composites, pp.643-653, 1990.

J. Renard, J. Favre, and T. Jeggy, Influence of transverse cracking on ply behavior: Introduction of a characteristic damage variable, Composites Science and Technology, vol.46, issue.1, pp.29-37, 1993.
DOI : 10.1016/0266-3538(93)90078-U

B. T. Rodini and J. R. Eisenmann, An Analytical and Experimental Investigation of Edge Delamination in Composite Laminates, Proceedings of the 4th conference on fibrous composites, pp.441-457, 1978.
DOI : 10.1007/978-1-4684-1033-4_25

A. Rotem and Z. Hashin, Failure Modes of Angle Ply Laminates, Journal of Composite Materials, vol.9, issue.2, pp.191-206, 1975.
DOI : 10.1177/002199837500900209

A. K. Roy, In situ damage observation and failure in model laminates containing planar yarn crimping of woven composites, Mechanics of Composite Materials and Structures, pp.101-117, 1996.

A. K. Roy, Comparison of in situ damage assessment in unbalanced fabric composite and model laminate of planar (one-directional) crimping, Composites Science and Technology, vol.58, issue.11, pp.1793-1801, 1998.
DOI : 10.1016/S0266-3538(98)00045-1

A. Schieffer, J. Maire, and D. Lévèque, A coupled analysis of mechanical behaviour and ageing for polymer-matrix composites, Composites Science and Technology, vol.62, issue.4, pp.543-549, 2002.
DOI : 10.1016/S0266-3538(01)00146-4

S. Sihn, E. V. Larve, and A. K. Roy, Three-dimensional stress analysis of textile composites: Part I. Numerical analysis, International Journal of Solids and Structures, vol.41, issue.5-6, pp.1377-1393, 2004.
DOI : 10.1016/j.ijsolstr.2003.10.017

S. Sihn, E. V. Larve, and A. K. Roy, Three-dimensional stress analysis of textile composites. Part II: Asymptotic analysis, International Journal of Solids and Structures, vol.41, issue.5-6, pp.1395-1410, 2004.
DOI : 10.1016/j.ijsolstr.2003.11.024

S. Sihn and A. K. Roy, Development of a three-dimensional mixed variational model for woven composites. II. Numerical solution and validation, International Journal of Solids and Structures, vol.38, issue.34-35, pp.5949-5962, 2001.
DOI : 10.1016/S0020-7683(00)00405-4

I. Solodov, K. Pfleiderer, H. Gerhard, S. Predak, and G. Busse, New opportunities for NDE with air-coupled ultrasound, NDT & E International, vol.39, issue.3, pp.367-373, 2006.
DOI : 10.1016/j.ndteint.2005.07.002

C. T. Sun and S. G. Zhou, Failure of Quasi-Isotropic Composite Laminates with Free Edges, Journal of Reinforced Plastics and Composites, vol.7, issue.6, pp.515-557, 1988.
DOI : 10.1177/073168448800700602

N. Takeda, Y. Okabe, J. Kuwahara, S. Kojima, and T. Ogisu, Development of smart composite structures with small-diameter fiber Bragg grating sensors for damage detection: Quantitative evaluation of delamination length in CFRP laminates using Lamb wave sensing, Composites Science and Technology, vol.65, issue.15-16, pp.2575-2587, 2006.
DOI : 10.1016/j.compscitech.2005.07.014

S. Takeda, Y. Okabe, and N. Takeda, Delamination detection in CFRP laminates with embedded small-diameter fiber Bragg grating sensors, Composites Part A: Applied Science and Manufacturing, vol.33, issue.7, pp.971-980, 2002.
DOI : 10.1016/S1359-835X(02)00036-2

R. Talreja, A Continuum Mechanics Characterization of Damage in Composite Materials, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.399, issue.1817, pp.195-216, 1985.
DOI : 10.1098/rspa.1985.0055

A. Thionnet, Prévision d'endommagement sous chargements quasi-statiques et cycliques des structures composites stratifiées, 1991.

A. Thionnet and C. Martin, Mecanique et comportements des milieux continus. Tome 1 : Concepts généraux. Ellipses, 2003.
URL : https://hal.archives-ouvertes.fr/hal-00169251

A. Thionnet, C. Martin, and S. Barradas, Mecanique et comportements des milieux continus, Tome, vol.2, 2003.
URL : https://hal.archives-ouvertes.fr/hal-00169251

A. Thionnet and J. Renard, Modelling unilateral damage effect in strongly anisotropic materials by the introduction of the loading mode in damage mechanics, International Journal of Solids and Structures, vol.36, issue.28, pp.4269-4287, 1999.
DOI : 10.1016/S0020-7683(98)00192-9

S. W. Tsa¨?tsa¨? and E. M. Wu, A general theory of strength for anisotropic materials, Journal of Composite Materials, vol.1, pp.58-80, 1971.

A. S. Wang, An Overview of the Delamination Problem in Structural Composites, Key Engineering Materials, vol.37, pp.1-20, 1989.
DOI : 10.4028/www.scientific.net/KEM.37.1

S. S. Wang, An Analysis of Delamination in Angle-Ply Fiber-Reinforced Composites, Journal of Applied Mechanics, vol.47, issue.1, pp.64-70, 1980.
DOI : 10.1115/1.3153639

J. M. Whitney and R. J. Nuismer, Stress Fracture Criteria for Laminated Composites Containing Stress Concentrations, Journal of Composite Materials, vol.221, issue.3, pp.253-265, 1974.
DOI : 10.1177/002199837400800303

E. M. Wu, Application of Fracture Mechanics to Anisotropic Plates, Journal of Applied Mechanics, vol.34, issue.4, pp.967-974, 1967.
DOI : 10.1115/1.3607864

L. Ye, Role of matrix resin in delamination onset and growth in composite laminates, Composites Science and Technology, vol.33, pp.257-277, 1988.

B. Yoon, K. Kamimura, and F. X. De-charentenay, Accumulation de l'endommagement dans les matériaux composites sous sollicitations de fatigue et de fluage, Comptes Rendus desQuatrì emes Journées Nationales sur les Composites, pp.353-369, 1984.

A. Yu and V. Gupta, Measurement of in situ fiber/matrix interface strength in graphite/epoxy composites, Composites Science and Technology, vol.58, issue.11, pp.1827-1837, 1998.
DOI : 10.1016/S0266-3538(98)00048-7